Manufacturer:
(Category: 503)
2-SHAFT SHREDDER - HEAVY DUTY, The machine is constructed in sturdy carbon steel and is complete with a supporting structure (1.400 mm heigh) and a loading hopper prepared to receive material from a spider or a belt, size 2.500 x 1.500 x 1.200, Shredding chamber mm.1500 x 900, independent shafts 1.500 mm long, shafts are driven by independent electromechanical motors., 2 x 75 kW motors, The maximum installed power is used to absorb load peaks. Normally, absorption will settle at values around 50% of the installed power., Shafts speed 13-15 rpm, N.15 knives 100 mm thick with 4 hooks, Automatic inversion on overload, Automatic lubrication pump, Tolerance : iron rods with a maximum thickness of 4 mm (up to 3%-4% of the total material), Electrical panel with PLC, Cabinet dimensions: L 1800 mm, H 2000 mm, D 500 mm., installed power - used power in work: about 60-65% : 150 kW, availability: a ...
VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, 60 mm screen (or bespoke), control panel, good working conditions, Constructed in 11-2001, Users manual, electrical drawings, CE compliance., offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: May 2026, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric
DUAL-SHAFT HYDRAULIC MULTI-PURPOSE PRIMARY SHREDDER, Loading hopper, bespoke to project and feeding system, Sturdy supporting structure in carbon steel height 2 mt from floor, with catwalk and rails, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Knives : 75 or 100 mm thick 4 hooks or bespoke, Hydraulic motor 75 kw, 400 V/50 Hz, hydraulic power unit,, electrical control panel with PLC and connection for remote assistance, automatic overload reversal with programmable number of reverse cycles, Delivery : about 4-5 months from confirmation (excluding Winter/Summer holidays), Complete with electrical drawings, User manual, CE compliance, Possible addition of loading and extraction belt with metal separator, width: 1.500 mm, Power: 75 kw
HEAVY DUTY SINGLE SHAFT SHREDDER - multipurpose, Main applications:TYRES - CABLES - WEEE - LIGHT METAL SCRAPS - OIL FILTERS, and other industrial waste, Rotor length: 1,200 mm, Rotor diameter: approx. 500 mm, rotor speed 144 rpm, Cutting chamber opening: 600 x 1.200 mm, 30 rotating blades, 16 fixed blades, Installed power: 1 x 132 Kw IE3 (belt drive), Siemens (PLC and control equipment), Schneider Electric (protections, switches and power supply), Omron (sensors and auxiliary modules), Power supply voltage: 3~ 400 V – 50 Hz, screen holes bespoke to project, Robust structure with interchangeable internal armour plating in wear-resistant steel., High-inertia rotor designed to minimise wear and optimise cutting power., Blades can be resharpened several times, Quick blade and grid replacement system with easy access., Hydraulically opening grid cradle for easy maintenance and grid replacem ...
Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control
Komptech Crambo 6200 E Direct Category: Wood & Green Waste Shredder Specification: Category: Stationary Twin-Shaft Shredder Serial/reference number: 495005 Power: 280 kW Weight: 17 200 kg Emission class: electric drive In need of repair Equipment and description: Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket
Komptech Crambo 5200 Direct (New) Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447242 Power: 328 kW/446 hp Weight: 27 300 kg Emission class: Tier 4 Final / Stage V Equipment and description: 4472423 Axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)
Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)
fire: SCM Technology, model: CM 1200 Mobile, Year of construction: 2010, Length: 11.000 mm, Width: 2.700 mm, box: 8.000 mm, Engine: Diesel engine, Cutting: 1000 x 900 mm, Stamper: 1 x 200 tons, General conditions: working, Cutting force: 1200 tons, Weight of machine: 53 tons
Planetary Gearbox PCEF53.5-X1 New For Doppstadt DW2560B, DW3060 standard, mobile & stationary Not suitable for Biopower models (42 teeth on the roller)! Fully assembled with output flange and driver
Holzzerkleinerer ( Holzhäckler ) maschine modell MION MOSOLE TR 2 gebrauchte maschine Maschinenbedienung im Automatik- und/oder Handbetrieb modus Arbeitsbedingungen: ausgezeichnet Im Automatikbetrieb startet der Motor in die entgegengesetzte Richtung, um den Stopfer von eventuellen Rückständen vorheriger Arbeiten zu befreien. Im Vollautomatikbetrieb stoppt der Motor nach ca. 5 Sekunden und startet erneut in die richtige Richtung für eine kontinuierliche Bearbeitung (siehe Video). Technische Daten : hydraulischer Schieber Breite Rotor mm.700 Durchmesser Rotor mm.300 Drehzahl Zerkleinerungseinheit 100 U/min Trichterinhalt 3.42 m³ Hauptmotor PS 25 Hydraulikaggregat Motorschieber PS 1 auswechselbare Messer Beschickung von oben
model: T500, brand: Idromec, Construction year: 2004, operating hours: approx. 11000, Shear force: 500 tons, Box length: 6 meters, Pretensioning device: No, Oil cooling: Yes, Automatic cycle: Yes, Remote control: Yes, Protective plate for slider: No, control cabin: Yes, State: as seen, not outdated, mass: approx. 58 tons, Installation: not included
Specifications Shredder Cutting width: 6 x 40 - 53 mm Year of manufacture: 2018 Power connection: 400 V / 50 Hz the safety level P-4/O-3/T-4/E-3/F-1 wg DIN 66399 Baler Maximum pressure: 4.4 tons Year of manufacture: 2018 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz If you have any questions, please call us: +48 696 072 985
Year of construction: 2011, TECHNICAL DATA:, Scherkraft 600 t (2 x 300t), Height under cutting knife 600 mm, Stern width 800 mm, Cutting blade width 840 mm, Stampferkraft 100 t, Stampferlänge 300 mm, Filling bed, Length 5952 mm, Width open 2400 mm, Width closed 750 mm, Cylinder force per press wing 2 x 130 t, Press Force outer wing 300 t, Slide force 130 t, power, Maximum power 360 kW (482 hp), Output power 330 kW (442 HP), Engine capacity 6 cylinders, Diesel tank 750 l, Transport dimensions, Overall length 13.400 mm, Width 2,500 mm, Height 4.175 mm, Gross weight 58 t., Construction year: 2011
DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw
DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw, Special Features: Interesting prices for these IT shredders, starting from 135 k€ for a hydraulic machine
ASCO Shredder VS 900 is ideal for rapidly and efficiently breaking down different composite materials. Its polyhedral inner wall has unfolded edges that slow the material, while centrifugal forces push pieces outward into corners where they are shredded as rotation continues. Materials separate automatically due to their different specific masses, allowing, for example, plastic to divide from aluminum or aluminum from iron. A screening grid can define the final fraction size; although this reduces performance, it enables direct feeding into further processes. ASCO Shredder VS 900 uses counter-rotating tool chains in a closed system that minimizes emissions and ensures smooth operation, even under tough conditions. The gentle shredding process preserves material quality and supports easy sorting, separation, or composting. Tools can be changed within minutes to reduce downtime, and the ...
The ASCO DS 600 is a compact, powerful double-shaft shredder designed for the efficient shredding of a wide range of materials, making it ideal for recycling companies, businesses, municipalities, and construction site logistics. With its robust construction and maintenance-friendly design, it handles wood, green waste, plastics, foils, pallets, packaging material, and production residues reliably and evenly. The counter-rotating shafts and powerful cutting units ensure controlled shredding with minimal space requirements. Its sophisticated design allows it to be used as a stationary or mobile unit, offering maximum flexibility for daily operations. An integrated control system provides simple operation, and an automatic reversing system prevents blockages for trouble-free use. Generous access points make maintenance quick and user-friendly. Whether used as part of a larger processin ...
The ASCO Shredder DS 900 is a powerful double shaft shredder for professional use in recycling, industry, waste disposal, and construction site logistics. With its robust construction, high drive power, and large filling opening, it is especially designed for shredding voluminous, heavy, or resistant materials. Whether timber, plastic, packaging, pallets, production residues, or green waste, Shredder DS 900 impresses with high throughput, controlled material shredding, and a durable, maintenance-friendly design.Two counter-rotating cutting shafts grip the material securely and shred it efficiently, even under difficult conditions. ASCO Shredder DS 900 is suitable for both stationary continuous operation as well as mobile use. The integrated control system offers intuitive operation, while the automatic reversing system ensures trouble-free operation in the event of overload or blocka ...
SPECIFICATIONS: Hopper opening: 1100 x 800 mm Installed power: 25 hp Rotor: Ø 300 mm Rotor width: 700 mm Production: 400/600 kg/h Interchangeable single blades Electronically adjustable horizontal feeder
Fully functional single-shaft wood shredder - currently in operation in our factory. Including electric control system (PLC), control cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Specifications Rotor working length: 1,500 mm Rotor diameter: 485 mm Engine: 55 KW Rotor speed: 100 RPM Rotor blades: 76 pieces concave / 35x35 mm 4-way rotatable cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg More details on request. Errors in the information excepted.
used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1996 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 82 kW Rated current: 162 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the pres ...
used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1990 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 78 kW Rated current: 150 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the pr ...
Sturdy supporting structure in painted carbon steel, loading hopper, Shearing size 1.300x900 mm, 2 x 22 kw drives, constructed in 2024, Rotor Length 1.300mm, N.25 knives, knives thickness 50 mm, 2 hooks, Weight about 4.500kg, Shaft speed 15/17 rpm, electric cabinet, complete with CE, users manual, electric drawings, installed power - used power in work: about 60-65% : 44
CONVEYOR BELT, Sturdy steel construction,, belt width 450 mm,, total length 8 500 mm,, inclination change 45°,, PVC belt L450mm, with applied trapezoidal guides,, corrugated edges, H50 mm and flights H50 mm L250mm,, idler roller diam.219,, outlet 500x150mm,, side rails,, 0.75 kw gear motor, rust-proof+enamel paint
TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm, Power: 75 kw
SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star-delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - ...
SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...
TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm. (59.06), Power: 100 Hp 75 kw
