peripheral equipment (e.g. heating,cooling,drying) used for sale

Drying centrifuge: 1 x 0.5 m Ø diam. Engine: 30 Kw (40 hp) at 2940 rpm.

liter capacity: unbkt lcoolant: unbkt pressure: unbkt ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Water-based head cutting, brand: Gamma Meccanica, type: TFD150, year: 1996. Centrifuge: 4 hp (3 kw).

machine measurements: 1.300 x 1.600 x 440 mmmachine weight: - kgpower capacity: ca. 2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overhead cutting to water, make: PRT, model: WF 55, engine: 0.55 Kw, year: 2002. Stainless steel centrifuge: 2.2 Kw. Water pump: 1.1 Kw. With electrical panel.

machine measurements: 2.000 x 1.300 x 1.800 mmmachine weight: 1.500 kgpower capacity: ca. 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Head for sheet: 1.45 with 3-roller calender: 1.45 m x 300 mm Ø, brand: Khune. Stretching and cuttering. Brand: Khune with film sheet weighing unit.

machine measurements: H/B/T 630x418x325 mmmachine weight: 30,3 kgpower capacity: 240V, 50/60 Hz, 0,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refrigeration equipment: 200,000 frigories, with 2 compressors (one for repair), brand: Bitzer 60 amps. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

machine measurements: 2.900 x 700 x 1.700 mmmachine weight: 400 kgpower capacity: 2,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gravimetric dispenser Brand: Maguire. For 4 different materials plus master dispenser. No electrical panel.

machine measurements: 1800 x 2300 x 2300 mmmachine weight: 1800 kgpower capacity: -- kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw compressor, make: Worthington Creyssensal, model: RLR 4000 AX2, motor: 30 Kw (40 hp), Bar max: 8, m3/h: 318, working hours: 16.159.

machine measurements: -- mmmachine weight: -- kgpower capacity: 189 kWCondition: usedSpecification: convection oven- Air circulation oven type ELIOG Kelvitherm / KUV 250/25-25-25,technical data:- inner dimensions: 2.500 x 2.500 x 2.500 mm- Temperature: max. 250°C- Temperature adjustable via programme controller- Door: single-leaf door- Electrical heating: 189 KW- Control system: EUROTHERM- with CE- Weight approx.: 3000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum cleaner for transporting solids. Motor: 15 Kw, diameter: 700 mm, width: 250 mm. Inlet tube: 200 mm, outlet tube: 200 mm.

Temperature range: Max. 30 °Cheating capacity: . kWCooling capacity: . Wcirculating medium: 30 Gradtotal power requirement: 4,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dry air dryer Somos TF 40 Stock No.: 503522 Machine/ Device Type: Dry Air Dryer Manufacturer: Somos Type: TF 40 Year of Make: 1994 - Dry air volume 40 sqm/h - Dry air temperature 60 - 140 °C - Drying tank volume 100 liters insulated - Dryer with molecular sieve type TF - Heating 4.5 kW - Mains connection 400 volts, 50 Hz. Heating power: 4.5 kW Hopper volume: 100 ltr.

liter capacity: . ltotal power requirement: 6900 Wweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock No.: 503488 Machine/ Device Type: Dry Air Dryer Manufacturer: Wittmann Type: Drymax D60 -150-M Year of Make: 2007 - Dew point down to -60°C - Process air (50 Hz / 60 Hz): 60m³ / h - Flow heating power: 3 kW - Reg. heating: 1.2 kW - Dry silo size: 150 ltr. Dryer for drying plastic granules with two desiccant cartridges, two regeneration heaters, microprocessor control with function display and fault message as well as integrated weekly timer, fine filter for return air, SMARTREG, temperature-controlled regeneration time, MSF material protection avoids over-drying, energy-saving counter-current regeneration, insulated stainless steel drying funnel with viewing window, swing door, manual gate valve.

Cooling capacity: 3000 kcal/hcoolant: dest. Wasser tank: 7,7 lvolume capacity: 3 l/minoperating pressure: 3,25 barconnected load: 0,5 kVAconnected load frequency: 380 V• water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock# UG6379 Little used centrifugal blower fan model GF-30. Working output in range from 27000 - 32000 m3/h, at pressure 6-5,8 kPa. Driven by el motor 75 kW, 1450 rpm, 380/660 V, 50 hz. Working temperature up to 20C. New 2021. Shipping dimensions: L 205 cm x W 240 cm x H 220 cm x weight approx 1000 kg. Includes technical documentation.

Number of filling stations: 10, with hoses.

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

There are 3 identical Maag FSC 160 screen changers available. Screen diameter min./max.: 600mm/200mm, screen area min./max.: 28cm²/314cm², throughput min./max.: 100-1700kg/h, max. temperature tolerance: 300°C, operating pressure: 700bar, differential pressure: 100bar. Documentation available.

Separating drum/ model ATS Year of construction 2008 Dimensions: LxWxH = 1.40 x 0.68 x 1.35m

Wittmann W828-0282 X-axis dimension 1100 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive

year: 2015 max. working pressure: 42 bar rated power: 37 kW rotational shaft speed: 401 r/min. Keeping your production up and running 24/24 Designed for industrial service 24/24, Atlas Copco DX/DN compressors work reliably at all times without the need for constant supervision. Their sturdy design leads to extremely low vibration levels. Proof of their reliability can be found in the thousands of machines installed in the field, where they provide a smooth and reliable supply of air or nitrogen. Protecting your process with oil-free technology Oil-free compression safeguards the quality of the compressed air and nitrogen. In most applications, even the slightest pollution is unacceptable and could lead to high risks for your production. Atlas Copco supplies the highest quality of air and nitrogen with boosters certified to Class 0 according to ISO 8573-1.

X axis dimension 1105 Y axis dimension 1400 Z axis dimension 3000 Other lifting capacity 8 Torsion axles B Drive servo

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3 MTA S.p.A. TAEevo Tech 602P3 are compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2" 1/2 Serial No.: 2200392538 Year of construction 2022 Con ...

X axis dimension 900 Y axis dimension 1600 Z axis dimension 2000 Other lifting capacity 20 Torsion axles B i C Drive servo