Manufacturer:
(Category: 1020)
Genie GS-2646 Scissor Lift (Used machine) • Manufacturer: Genie • Model: GS-2646 • Design: Electric scissor lift • Year of construction: 2007 • Date of manufacture: 04/2007 • Serial number: GS4607-86053 • Net weight: 2,468 kg • Load capacity: max. 454 kg • Max. number of people on the platform: 2 people • Gradeability: 30 % / 16.7° • Rated power: 3.3 kW / 4.4 HP • Drive: Electric / Battery • CE marking available Working platform: • Scissor lifting system • Working height: approx. 9.9 m • Platform height: approx. 7.9 m • Spacious working platform • Platform with extendable deck • Platform load capacity up to 454 kg • Platform control available • Access via side entrance door • Designed for indoor and outdoor use • Permissible wind speed in outdoor use: max. 12.5 m/s Drive / Equipment: • Self-propelled version • Electric drive • Hydr ...
800 mm bucket for JPC excavators (except HT25 mm), Ø25 mm coupler, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50796-421
800 mm bucket for JPC excavators (except HT25 mm), Ø25 mm coupler, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50796-423
Niftylift HR12 NE electric articulated boom lift – 2011 – 1,119 hrs – 12.2 m – non-marking Specifications: Brand: Niftylift Model: HR12 NE Year of construction: 2011 Serial Number: 12 22143 Hours: 1,119.5 hours, read Drive: electric, 4x2 Battery system: 24 V Own weight: 3,170 kg, according to type plate Maximum working height: approx. 12,200 mm Maximum platform height: approx. 10,200 mm Horizontal reach: approx. 6,100 mm Maximum platform load: 200 kg Maximum number of people: 2 Platform dimensions: approx. 1,100 x 650 mm Maximum incline capacity: 25% Maximum permissible tilt: 4° Maximum wind speed: 12.5 m/s Maximum hydraulic working pressure: 200 bar Maximum travel speed: approx. 3.4 km/h Swivel range of the superstructure: approx. 355° Wheelbase: approx. 1,900 mm Turning radius outside: approx. 4,200 mm Ground clearance: approx. 185 mm Transport length: approx. 4,100 mm Trans ...
Mikasa MT-65H vibratory rammer / rammer with Honda GX100 Brand: Mikasa Model/type: MT-65H Manufacturer: Mikasa Sangyo Co., Ltd., Japan Serial Number: V3249 Product Type: Vibratory Rammer / Soil Rammer Own weight: 66 kg Power: 1.8 kW Engine: Honda GX100 petrol engine Fuel: Petrol Start: hand start / pull starter Made in: Japan Features: - Honda GX100 4-stroke petrol engine - 1.8 kW power according to machine plate - Vibrate/stamp mechanism - Steel stomping foot - Spring bellows - Fuel tank - Pull starter - Throttle - Protective tubular frame all around - Handles for operation and transport - Engine protection - CE marking - Inspection sticker available - Working seen - Inspection number 2932876 Application: professional vibrating rattle for compacting soil, sand, foundation material and paving substrate, especially suitable for trenches and other hard-to-reach places. Condition: used, wit ...
Genie Z-34/22 IC 4x4 articulated boom lift – 2011 – 3,993 hours – 12.6 m working height – diesel Specifications: Brand: Genie Model: Z-34/22 IC Year of construction: 2011 Production date: 16-02-2011 Serial Number: Z3411-8295 Hours: 3,993 hours, read Engine: Kubota diesel Engine power: 19.4 kW / approx. 26 hp Fuel: diesel Drive: 4x4 Own weight: 4,703 kg, according to type plate Maximum working height: approx. 12,600 mm Maximum platform height: 10,600 mm Horizontal reach: approx. 6,800 mm Maximum bridging height: approx. 4,600 mm Platform capacity: 227 kg Maximum number of people: 2 Maximum climbing ability: 45% Jib length: approx. 1,220 mm Swivel range of the superstructure: 355° Transport length: approx. 5,660 mm Transport width: approx. 1,850 mm Transport height: approx. 2,060 mm Compact storage length: approx. 4,110 mm Compact storage height: approx. 2,290 mm Platform dimensi ...
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50796-326
416-24,-26,-34,-36,-44,-46 Overhauled by Danfos Auction-ID: A1-50849-502
Custers 1632 Dyna-Mite Electric Scissor Lift (Used machine) • Manufacturer: Custers Hydraulica B.V. • Model / Type: 1632 • Series: Dyna-Mite • Design: Self-propelled electric scissor lift • Year of construction: 1997 • Serial number: 8502482 • No.: 6078025 • Maximum platform load: 230 kg • Maximum operating pressure: 155 bar Equipment / Construction: • Hydraulic scissor lift mechanism • Self-propelled chassis • Working platform with circumferential guard railing • Platform control • Ground control • Hydraulic power unit • Electric drive • Solid rubber tyres • Operation, service and maintenance manual available Condition: • Used, age-appropriate condition • Clear signs of use and work present • Dirt and superficial corrosion present • Painting of the work cage with scratches and paint chips • Tyres with visible signs of wear • Hydraulic ...
Cab open. complete (Canopy) Type 418 Auction-ID: A1-50849-359
SOLMEK BM-800 Universal Floating Hydraulic Flail Mower, Floating Flail Mower, Oil Flow 40-90 L/min, Cutting Size 800 mm, Pin Diameter 40 mm, Never Used, Packaged in Original Packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 175 kg Auction-ID: A7-50796-285
Grove A40NE articulated telescopic boom lift (defective) • Manufacturer: Grove • Model: A40NE • Design: Self-propelled articulated telescopic boom lift • Year of manufacture: 2000 • Serial number: 264550 • Manufacture: USA • Drive: Electric • Platform height: approx. 12.19 m • Working cage load capacity: 227 kg • Max. hydraulic pressure: 224 bar • Max. permissible horizontal force: 400 N • Max. permissible wind speed: 9 m/s Equipment / Construction: • Articulated telescopic boom • Work basket with control panel • Ground control • Hydraulic lift and swivel drive • Self-propelled chassis • 4 wheels with coarse tyres Condition: • Device defective / non-functional • Battery removed / not available • Function cannot be tested due to lack of battery • Note on the device: Control box has been blinded / no function • Clear signs of wear due to ag ...
Hydraulic mowing blade for mini-excavators, cutting length 1500, pressure from 120-180 bar, oil flow rate 20-30 lt/min Overall dimensions: 1500 x 800 x 400 mm Weight: 50 kg Auction-ID: A7-50796-333
Specifications: • Fully self-supporting steel construction • Three connected halls (without partitions) • Large entrance doors, ideal for trucks and machinery • Suitable for storage, workshop, production or agricultural use The shed was professionally dismantled by us. All parts are delivered neatly and ready for transport. Auction-ID: A1-47394-229
Demolition hammer for mini-excavators, ideal for JPC HT10-HT12-HT15 models for excavators from 700 to 1800 kg, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-50796-205
Equipped with: petrol engine, manual start, milling wheel approx. Ø 27 cm, milling wheel speed approx. 4,700 rpm, maximum milling height 25 cm above ground level, maximum milling depth 23 cm below ground level, direct belt drive, manual mobile, folding control lever, weight approx. 61 kg and dimensions approx. 142 × 58 × 114 cm (L×W×H), folded approx. 92 × 58 × 59 cm. NEW ENGINE NOT YET RUN Auction-ID: A1-47394-291
416-28,-29,-32,-38,-39,-42 Overhauled by Danfos Auction-ID: A1-50849-503
Cab open. complete (Canopy) Type 418 Auction-ID: A1-50849-362
JLG 1930ES electric scissor lift – 2014 – approx. 8 m working height Specifications: Brand/type: JLG 1930ES Year of construction: 2014 Drive: electric, 24 V Working height: approximately 7.72 m Platform height: approx. 5.72 m Platform dimensions: approx. 0.76 × 1.87 m Extendable platform: approx. 0.90 m Platform capacity: approx. 230 kg Batteries: Trojan deep-cycle batteries Battery charger: built-in automatic battery charger Total width: approx. 0.76 m Total length: approx. 1.87 m Headroom: approx. 1.98 m Own weight: approx. 1,550–1,575 kg Tires: solid, non-marking Controls: Top and bottom controls Features: Proportional travel and lift control On-platform operation Separate bottom control Automatic parking brakes Horn Slope alarm Emergency lowering function Fork Sleeves Lifting/lashing points Roll-out extension platform Built-in automatic battery charger Trojan Deep Cycle Bat ...
Various stone clamps – BSV and Vicon – 2 pieces Quantity: 2 pieces Product Type: Mechanical Stone Clamps / Lifting Clamps 1x Vicon brick clamp - Brand: Vicon - Height: approx. 400 mm - Width: approx. 500 mm - Length: approx. 500 mm - Mechanical clamp construction - Lifting eye - Hinged lifting arms - Clamping jaws - Self-clamping effect 1x BSV Stone Clamp - Brand: BSV - Height: approx. 640 mm - Width: approx. 1,500 mm - Length: approx. 890 mm - Maximum working load (WLL): 1,700 kg - Clamp opening: 400–650 mm - Own weight: approx. 80 kg - Factory Number: 97 - Patent number: DK 112046 - Mechanical clamp construction - Central lifting eye - Hinged lifting arms - Clamping jaws Application: suitable for the mechanical clamping, hoisting and moving of stones, paving materials, blocks and similar elements, within the permitted dimensions and load. Condition: used, with clear signs of wear ...
Hydraulic rotary grapple for wood, universal coupler, 800 mm opening for excavators from 700 to 2700 kg, never used Overall dimensions: 400 x 400 x 500 mm Weight: 45 kg Auction-ID: A7-50796-337
Floating flail mower for mini-excavators, universal model for excavators from 12 to 75 quintals, equipped with pilot valve and floating knives. Never used, packed in its original packaging Overall dimensions: 1000 x 800 x 500 mm Weight: 130 kg Auction-ID: A7-50796-170
SOLMEK BM-600 Universal Floating Hydraulic Flail Mower, Floating Flail Mower, Oil Flow 30-80 L/min, Cutting Size 600 mm, Pin Diameter 30 mm, Never Used, Packaged in Original Packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 175 kg Auction-ID: A7-50796-397
Mechanical roof sheet clamp / roof element clamp – galvanized – 1,650 mm Robustly designed mechanical roof sheet clamp / roof element clamp for clamping, lifting and positioning roof sheets and similar roof elements during assembly work. Equipped with a galvanized steel frame and a central mechanical lever and hinge mechanism. Specifications: Type: Roofing Sheet Clamp / Roof Element Clamp Operation: mechanical Construction: galvanized steel Dimensions (L × W × H): approx. 1,650 × 680 × 450 mm Length of clamping bars: approx. 880 mm Number of clamping bars: 2 Clamping bars: with protective coating Number of lifting eyes: 4 Clamping mechanism: mechanical lever and hinge mechanism Frame construction: fixed Condition: Used Features: Galvanized steel support frame Four integrated lifting eyes Two padded clamping bars Central mechanical lever mechanism Hinged clamp construction A ...
Husqvarna K770 with GeoRipper trencher attachment (Used machine) • Manufacturer of power tools: Husqvarna • Type: K770 • Design: walk-behind trencher / mini trencher • Attachment: GeoRipper • Marking on the sword: GR 6 • Engine: 2-stroke petrol engine • Engine start: pull-start • Walk-behind design • Chassis with 2 wheels • Height-adjustable handlebar • Control lever on the handle Trencher Unit: • GeoRipper chain cutter • Circumferential milling chain with cutting tools • Long guide sword • Chain drive via the Husqvarna power unit • Protective cover in the chain drive area • Suitable for creating narrow trenches in the ground Equipment: • Two-wheeled chassis • Long handlebar • Handle with control lever • Protective bar on the engine • Transport / carrying strap available • Mudguard in the area of the milling head Condition: • Used cond ...
Equipped with: extendable hydraulic support legs, electrically and hydraulically operated, single axle, trailer braked, beacon, 1.5 kw. Hydraulic power unit: Kramp MPP85A004 Power supply: 230 V AC Pump flow: 5.3 l/min Pump displacement: 3.7 cm³/rev. (your label says 3.8 cc/rev) Working pressure on your copy: 130 bar Max. continuous pressure generator: 150 bar Hydraulic tank: 8 liters Auction-ID: A1-47394-180
Max working height 8500 mm never used MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Overall dimensions: 2200 x 1000 x 2200 mm Weight: 1200 kg Auction-ID: A7-50796-190
Skyjack SJIII 4632 Scissor Lift (Used machine) • Manufacturer: Skyjack • Model: SJIII 4632 • Design: Electric scissor lift • Year of construction: 2016 • Operating hours: 91 h • Drive: Electric / Battery • On-board voltage: 24 V • Application: Indoor and outdoor use on suitable surfaces Working platform: • Scissor lifting system • Working height: approx. 11.75 m • Platform height: approx. 9.75 m • Platform with extendable deck • Spacious working platform • Platform railing with access door • Foldable railing • Platform load capacity: approx. 318 kg Chassis / Drive: • Self-propelled version • Electric drive • Hydraulic lifting function • Solid rubber tires / non-marking tires • Steerable wheels • Operation from the work cage • Emergency lowering / floor operation Battery / charging device: • 24V battery system • 4 traction batteries i ...
500 € 
