Manufacturer:
(Category: 2500)
Keyence SL-V96H - Security Light Curtain Model: SL-V96H Detection Capacity: ø25mm Distance between beam axes/lens diameter: 20 mm/ø5 mm Effective Beam Angle: Max. ±2.5° (when the operating range is 3 m or more) Working Distance: 0.1 to 7m Response time (ms) ON→OFF 19,11 OFF →ON. 59,11 Light Source: Infrared LED (850nm) Operating Mode: Turns on when there is no interference in the detection zone (except when the muting function is used) OSSD output Output: 2 outputs for PNP and NPN. It can be changed with a jumper cable. Max. Load current: 500mA2 Residual Voltage During Operation: Max. 2.5 V (with 7 m cable) Leakage Current: Max. 100 μA3 Max. Capacitive load: 2.2 μF (at 100 Ω load resistance) Load Wire Resistance: Max. 2,5 Ω4 Non-security output: AUX Output with automatic PNP/NPN switching function, max. 50 mA. Interl ...
Allen Bradley Guard Master 450L-E4FL1800 - safety barrier Brand: Allen Bradley Guardmaster Product type: Light curtain Series: 450L-E Beam Resolution: 14mm Component Type: Transceiver Protection Type: Type 4 Standards/Approvals: TUV, IEC Protection height: 1.8m Maximum protective width: 9m Maximum supply voltage: 24V Minimum Scanning Distance: 0.5m Maximum Scanning Distance: 9m Height: 1.8m Length: 30mm Width: 30 mm Maximum response time: 20ms Connector Type: Screw
Industrial PC with 15.6" touch panel Equipment new, packed, in original box When buying more than three pieces of this product, a 25% discount
This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.
This 3-axis Auerbach FBE 3000 Bed Type Milling Machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of handling a maximum table load of 10,000 kg. The machine is equipped with a multi-position milling head KFM 1, a tool holder SK 50, and offers a spindle power of 25 kW with speeds up to 4000 rpm. If you are looking to get high-quality milling capabilities, consider the Auerbach FBE 3000 machine we have for sale. Contact us for more information.
Hammer KSC06 scrap shear, - carrier device (stick): 5-12 t, - weight: approx. 480-550 kg, - cutting force: 2750 kN, - opening width: 350 mm, - jaw depth: 348 mm, - total length: 1880 mm, - oil flow (opening/closing): 70-100 l/min, - slewing unit: 20-30 l/min (approx. 80 bar)
Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used
Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used
Pallets with baker's baskets / transport crates made of plastic in stable professional quality are offered in various sizes and colours. Ideal e.g. for bakeries, warehouses, logistics commercial kitchens, food production, gastronomy and catering. There are a total of 126 pallets with approx. 8000 crates, whereby these are handed over exclusively by pallet. Sizes and prices: 60 x 40 x 16: € 2.50 net per box 5 pallets = 240 pieces = 48 boxes per pallet = € 120 net per pallet 21 pallets = 2,016 pieces = 96 crates per pallet = € 240.00 net per pallet 60 x 40 x 8: € 2.50 net per box 1 pallet = 80 pieces = € 200.00 net per pallet 1 pallet = 50 pieces = € 125.00 net per pallet 80 x 40 x 10: € 2.50 net per box 77 pallets = 4,620 pieces = 60 crates per pallet = € 150.00 net per pallet 1 pallet = 35 pieces = € 87.50 net per pallet 80 x 40 x 15: € 2.50 net ...
BIG adapter Euro to three-point, - with adjustable lower link hooks and removable trailer coupling, - Net weight approx. 190 kg, - KAT 3
BIG Adapter Genie/Terex on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3
BIG Merlo ZM2 adapter for three-point hitch,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3
BIG adapter Euro to three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3
Verachtert rock bucket with armored teeth, - 160 cm width, - new armored teeth
SML heavy-duty dump bucket 240cm with JCB Q-Fit mounting, - Net weight: approx. 443 kg, - Volume: 1.56 m3
BIG SUN Swivel dump bucket 240 cm with Merlo ZM2 mount, - Net weight: approx. 351 kg, - Volume: 1.01 m3
BIG SUN Swivel discharge bucket 240 cm with case mounting, - Net weight: approx. 351 kg, - Volume: 1.01 m3
SML Heavy-duty tipping bucket 240cm with Manitou mounting, - Self-weight: approx. 443 kg, - Volume: 1.56 m3
SML heavy-duty dump bucket 240cm with Merlo ZM2 mount, - Net weight: approx. 443 kg, - Volume: 1.56 m3
BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable hitch, - Net weight approx. 190 kg
BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable trailer coupling, - Net weight approx. 190 kg, - KAT 3
A water mixing and dosing device from the Scheurer company from 2022 will be offered. The device is used, but in very good condition. Technical data: Manufacturer: Johannes Scheurer GmbH Description: Water mixing and dosing device Series/ Model: CENTRALINA/ DOSAMIXA Year of Make: 2022 Volts: 230 Frequency: 50 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, ...
On offer is a water treatment plant from WABS GmbH from 2021, used in very good condition. Technical data: Manufacturer: WABS GmbH Description: Water treatment plant Model No.: UO-D 1200 Year of Make: 2021 Volts: 400 Frequency: 50 KW: 2.2 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer
Laser Welding Machine – IPG Photonics GENESIS on a marble measuring base Cell Model: SYSLC0000058U Serial Number: PD206000 Power supply: 380-415 VAC Phases: 3P+N+PE Frequency: 50/60Hz Full Load Current: 25 FLA Overcurrent protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Electrical diagram: DOCCHSDMPSXX0225 Production Date: September 2022 2. Laser Source Model: YLR-1500-WC Serial Number: PLMP32200563 Power supply: 200-240 VAC, 1 phase, 50/60 Hz Rated Power: 4500VA Production date: March 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Production date: February 2022 Power supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent protection: 30 A / Type 1 Short-circuit current: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Electrical Diagram: P35-001221 Cooling capacity: 5.5/5.9 kW ...
Type: PX 30530 Serial Number: 12932 Year: 2021 Bending Length: 3050mm Pressing Force: 320 Tons Maximum pressure: 280 bar Motor power: 18.5KW Oil tank capacity: 400 l Weight: 14,700 kg
Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of manufacture: 2016 Serial Number: HFE-M2-220.4 LK101025 Number of axles: 7 (8 AXESL configuration) Pressing force: 2.200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending Angle Measurement: Digital Angle Sensor Stroke: "Long Stroke" (extended) Connection power: 20 kW Hours worked: 10,238 h Dimensions and weight: Weight: 17.970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: 1 Tool Rack (VA) 2 tables with equipment
Bending length: 4100 mm Pressing force: 240 tons Equipped with a set of large number of bending tools Manufacturer: Baykal Model: APHS 41240 Power supply: 3-phase Year: 2021 Serial Number: 28635
ON 17.12.25, A FULL AUDIT OF THE MACHINE WAS CARRIED OUT BY THE MANUFACTURER'S SERVICE Report available WORKING HOURS: 80H (START-UP ONLY) PRICE OF A NEW MACHINE: 7,500,000 EURO • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 •Year of manufacture: 2020/ first commissioning year 2021 • Last operation: 2022 Specifications • Working width: 1600 mm • Suitable material: Polypropylene (PP), MFI 230 /2.16 > 400 g/10 min • Capacity: Up to 65 kg/h per meter of width • Product weight: 10-80 g/m² • Production speed: 5-80m/min • Nozzle head: MB 1600, 50 h/inch • Extruder: RT-1101-1-100, L/D 30 • Rotary beam heating power: 65-172 kW • Winding station: contact winding machine with automatic coil change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tens ...
The line is from 2010. Modernization done in 2020. SPECIFICATIONS OF THE ZEMAN CZS LINE ZEMAN's flagship product, the fully automated "PURLIN" line, is used for the production of open cold-formed sections such as C, Z and SIGMA, with different widths and shapes, thanks to the fully automatic adjustment of the profiling rollers. Coils up to 750 wide can be used as raw material mm and sheet thickness 1.25 mm – 3 mm in grade S-390 and lower. The machine is adapted to production of elements up to 15 m in length. Width adjustment of specially hardened profiling rollers It is done steplessly, using only dedicated software. Fully integrated the "flying punching" device makes all kinds of mounting holes, and the whole process is continuous, which means that the material does not stop to perform individual operations such as punching holes or cross-cutting. To main ...
new
One is 95% complete and the other is 70% complete, with propulsion and navigation systems ready.
