101 results

Category: 309 mills
New in: used
Location: Land-de DE 74909 Meckesheim, Industriestr. 33
Seller:

Intake opening approx. 500 x 800 mm Open rotor with bevel, 450 mm dia x 800 mm wide 3 x 2 rotor blade, 2 x 2 stator Drive 30 kw with exhaust, electric control

Category: 309 mills
New in: 2003
Location: Wuppertal nhe Dsseldorf
Seller:

engine output: 132 kWFeeding opening: 750 x 1450 mmginding chamber dimensions: 750 x 1450 mmweight of the machine ca.: 8 t

Category: 309 mills
New in: 1985
Location: Land-de DE 84051 Essenbach, Ginglkofen 4
Seller:

-11 kW -11,000 rpm. -Pressure circulation lubrication of main bearing -Control cabinet -Stainless steel console table -Roller containers in stainless steel for grist -Vibrodosierrinne -Inlet funnel in V2A

Category: 309 mills
New in: used
Location: Wuppertal nhe Dsseldorf
Seller:

engine output: 30 kWFeeding opening: 340x520 mmginding chamber dimensions: 340x520 mmtotal power requirement: 30 kWweight of the machine ca.: 2 t

Category: 309 mills
New in: used
Location: Land-de DE 65197 Wiesbaden, Flachstr. 11
Seller:

Intake opening: 408 x 510 mmRotor - Ã?: 400 mm5 rotor blades, width: 500 mmDrehzahl: 640 UpmAntriebsmotor: kWPlatzbedarf 400 V, 30: 1230 x 950 x 1550 mm: 900 kg

Category: 309 mills
New in: 2017
Location: Lager NORTEC
Seller:

engine output: 2,2 kWFeeding opening: 270 x 300 mmginding chamber dimensions: 200 x 215 mmCapacity: 30 - 50 kg/hrotating blades: 3 Stck/ piecefixed blades: 2 Stck/ piecerange L-W-H: 508 x 903 x 1288 mmweight: 260 kgtransport dimensions LxBxH: 950 x 750 x 1450 mm: Condition : showroom machine: Techn. Data : according to the data sheet: : GR series granulators are particularly suitable for hot and soft sprues. They include seven sizes, available in two versions each: Uniblade with an angled blade and  ...

Category: 309 mills
New in: 2001
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller:

warehouse no.: 502049 manufacturer: Getecha Typ: GRS 182-A1.50 year of construction: 2001 technical referenz: Cutting mill Getecha GRS 182-A1.50 slow rotating 300 rpm Feed opening 200x200 mm Rotor knives 7 Stator knives 1 Power 2,2 kW Hole diameter 6 mm

Category: 309 mills
New in: 2017
Location: Lager NORTEC 2
Seller:

engine output: 4 kWengine output: 3,0 kWFeeding opening: 370 x 300 mmFeeding opening: 370 x 300 mmginding chamber dimensions: 300 x 215 mmginding chamber dimensions: 300 x 215 mmCapacity: 40-80 kg/hCapacity: 40 - 80 kg/hrotating blades: 3 Stck/ piecerotating blades: 3 Stck/piecefixed blades: 2 Stck/pieceScreen: 6 mmfixed blades: 2 Stck/ pieceDimensions (LxWxH): 903 x 608 x 1.288 mmweight: kg: Condition : fair machine: Techn. Data : according to the data sheet: : The grinding chamber is the heart of th ...

Category: 309 mills
New in: 2001
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller:

warehouse no.: 502048 manufacturer: Getecha Typ: GRS 182-A1.50 year of construction: 2001 Keyfeatures: drive power 2,2 kW Rotor speed 300 rpm roto knives 7 screen hole diameter 6mm Stator knives 1

Category: 309 mills
New in: 2017
Location: NORTEC Showroom
Seller:

engine output: 2,2 kWFeeding opening: 449 x 482 mmginding chamber dimensions: 2420 x 366 mmCapacity: 16 kg/hrotating blades: 4 Stck/piececrusher blades: 3 Dimensions (LxWxH): 768 x 700 x 1.335 weight: 310 kg: Condition : showroom machine: Techn. Data : according to the data sheet: Kastor is a low speed grinder suitable for technical materials grinding. It is able to regrind sprues as well as moulded items, thanks to its auto-reverse system.- Regular and dustless regrind material- Low noisiness to all ...

Category: 309 mills
New in: 2000
Price 5.300 €
Location: Land-cz CZ 38601 Strakonice, Jinin 78
Seller:

Granulator for plastic, plastic-coated Lancelin with three rows of three bolted knives. With 10 mm perforated strainer holes �. Filling up by hopper with hinged cover 650 x 460 mm; Number of rotors 1 3 piece knife + 2 piece counter Blade Knife long 450 mm Motor power 30 kW 1470 rpm, 220/380 V inlet above 650 x 460 mm Inlet 150 x 460 mm rotor diameter 400 mm rotor length 450 mm Screen holes ø 10 mm water cooling Length/width/height 1400/1630/2500 mm Approx. weight kg 2000

Category: 309 mills
New in: 2017
Location: Lager NORTEC 2
Seller:

engine output: 1,1 kWFeeding opening: 190 x 150 mmginding chamber dimensions: 190 x 150 mmCapacity: 20 - 40 kg/hfixed blades: 2 Stck/ piecerotating blades: 6 Stck/ pieceDimensions (L/W/H): 492 x 680 x 1318 mmweight: 174 kg: Condition : fair machine: Techn. Data : according to the data sheet: : The GR grinders, verystrong and compact, are suitable to the use in the moulding department thanks to their reduced noise. The machine is built according to a constructive concept of assemblage per modules. The b ...

Category: 309 mills
New in: 1979
Location: Land-pl PL 05-85 Ozarow Mazowiecki, Wolnosci 1a
Seller:

Stock# U2296-4 Used carbon steel grinding mill by Pallmann (Germany) model REF L18. Mill has diameter of milling elements 180 mm. Milling chamber is equipped with two grinding tracks and five blades rotor working with rotation 5500 and 11000 rpm. Rotor is belt driven by el. motor 3.2/2.6 kW, 2920/1450 rpm, 400/220 V, 50 hz. Product is feeded via AEG vibrating feeder with adjustable frequency of vibration. Also there is an liquid feeding connection at product inlet. Bottom central discharge. Mill is equipped wit ...

Category: 309 mills
New in: 1985
Location: Complast - Pegnitz
Seller:

engine output:2,2 kWFeeding opening:200 x 200 mmginding chamber dimensions:200 x 200 mm: Number of rotor knives:12 Stk.Number of stator knives:2 Stk.Rotor speed: U/minRotor-:200 mm: dimensions:1.300 x 800 x 800 mmweight:ca. 150 kgApplicability:sprue Equipment: Payment terms: 100% prior to delivery

Category: 309 mills
New in: used
Location: Land-pl PL 05-85 Ozarow Mazowiecki, Wolnosci 1a
Seller:

Stock # U2295-1 Second hand, carbon steel, cutting mill by Dreher Gmbh&Co (Germany) type S26/41. Mill has feeding inlet 41,5 cm x 49 cm. Milling chamber has internal dimensions: width 410 mm x diameter 260 mm. Rotor is belt driven by el. motor 11 kW, 1440 rpm, 380/660 V, 50 hz. Rotor is solid type and is equipped with three knives and is working with rotation about 557 rpm. There are two stationary knives mounted on walls of milling chamber. Below there is installed a screen. Bottom discharge into the rectangular  ...

Category: 309 mills
New in: 2004
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

WITTMAN JUNIOR 1 SHREDDER CONVERTING and DOWNSTREAM shredder Construction year 2004 Shredding chamber: 240 X 225 mm.

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

PREVIERO WET GRINDER MU510L 75 kW Loading hopper Steel rotor 1000 mm long x 550 mm. diam. water cooled Roll type outer bearings Scissor type cutting N.3 rotor + n.2 stator steel blades 58/59 HRC Adjustable still and rotating knives Belt transmission Closed rotor with exchageable knif holding parts Electric components with IP54 protection Epossidic paint Unloading hopper Complete with electric cabinet for management N.1 series of spare knives. Machine RECONDITIONED

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

TYRE GRANULATOR with METAL SEPARATOR Cutting chamber width 2.000 mm. Weight abt 16000 kg Semi-opened hopper 1000 x2500 mm. Powder and textile vacuum extraction unit Verage output 2.000 kg/h depending on grid Possible grids 16 to 35 mm. Front door for grid replacement, opened by hydraulic pistons Back side can be opened by hydraulic pistons to replace stator + rotor knives with two simple spanners. His granulator needs constant and regular feeding in order to avoid any energy waste, with Shredded tyres a ...

Category: 309 mills
New in: 1994
Location: Land-de DE 65197 Wiesbaden, Flachstr. 11
Seller:

Opening: 400 x 500 mm Rotor diameter: 5 blades Drive motor: 380 V Space requirements: 1380/2000 x 1300 x 2300 mm

Category: 309 mills
New in: 1995
Price 2.800 €
Location: Land-de DE 35099 Burgwald, Industriestr. 1
Seller:

Rapid mill 400V connection

Category: 309 mills
New in: 2009
Price 4.500 €
Location: Land-de DE 35099 Burgwald, Industriestr. 1
Seller:

Fully functional AMIS Zerma mill BJ 2009

Category: 309 mills
New in: 2014
Location: Land-de DE
Seller:

Output: 1.8t/h, inlet opening: 1120x1420mm, material inlet dimensions/ conveyor belt with metal detecotr: 800x5000mm, number and length of blades: 3x 700mm, rotor diameter: 1000mm, rotor type: bevel cut SD 9, number of blade rows: 9, number of rotor blades: 18, connected load: 132kW, circular hole diameter: 6mm.

Category: 309 mills
New in: used
Location: Land-de DE
Seller:

Mill high speed Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

FBM GRINDER 650 mm. Infeed : 800500 mm Side feeding for pipes 300250 mm. A.c.motor 37 kw Semi open rotor 650 mm long N.3 rotor knives + n.2 stator knives Brand new grid with drilling on request Tilting bunker for knives replacement Unloading bunker Electrical cabinet Machine completely reconditioned with sworn appraisal

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

PREVIERO GRINDER MU715M Conveyor belt with Metal Detector Infeed 9001500 mm Granulation chamber 7601500 mm Motor power 200 kw Rotating blades 6 Fixed blades 2 Grid 12 mm Extraction vent 18.5 kW Electrical cabinet Tilting loading tray hydraulic power station for knives and grid replacing Reel feeding unit (missing of motors and gearboxes) Construction year 1995

Category: 309 mills
New in: 2003
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

PREVIERO PULVERIZING LINE 75 kW PREVIERO PULVERIZER Construction year 2003 Dosing unit type DCV 15/50 Auger type CL150 Metal detector Rapid Compact 120 Pulverizer PD500, Motor 75 KW, Dusting disks 1 fixed + 1 rotating D.500 mm Cutting speed 2650 rpm Pneumatic conveyor type TP11 Rotary valve type Mald 175/1 Fan VPF630 Auger type MAR65 Auger type MA90 Bag filling station Machine reconditioned by Constructor in 2010 Good working conditions

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

PREVIERO GRINDER MILL MU 408 Mill MU 408 Construction year 1992 Infeed 410790 mm Granulation chamber 400800 mm Motor power 55 kw Rotating blades 3 Fixed blades 2 Grid 12 mm Extraction blower 15 kW Electrical cabinet Tow group 1 spare grouup of knives (rotor+stator)+ 1 template for blades adjustment

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

MECCANOPLASTICA GRINDER 1200T Manifacturer: MECCANOPLASTICA Type: 1200T. Construction year 1995. Infeed 1195X330 mm. Cutting chamber 1215 X 215 mm. Suitable for thermoformed trims and such. Screen with 9 mm. holes others available on request. Totally reconditioned. Suitable for thermoformed trims and such. Screen with 9 mm. holes others available on request. Totally reconditioned.

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

CMG GRINDER 700 mm. Infeed 712410 mm. Granulation chamber 710430 mm. Motor power 22 kw Rotating blades 3 + 3 Fixed blades 2 + 2 Grid holes 3 mm Production 490 kg / h (with 8 mm grid) The machine is prepared for extracion vent (missing) Construction year 2001

Category: 309 mills
New in: 2003
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

CMG GRINDER 700 mm. Infeed 712410 mm. Granulation chamber 710430 mm. Motor power 22 kw Rotating blades 3 + 3 Fixed blades 2 + 2 Grid holes 3 mm Production 490 kg / h (with 8 mm grid) The machine is prepared for side extraction vent (missing) Construction year 2003

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

GAMAN PLAST GRINDER Infeed 500500 mm. Granulation chamber 450480 mm. Motor power 15 kw Rotating blades 2 Fixed blades 2 Grid holes 12 mm Material extraction through collection box Construction year 1999

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

PREVIERO GRINDER MU408 construction year 1996 infeed 490x910 mm Granulation chamber 400x800 mm Motor power 37 kw Rotating blades 3 Fixed blades 2 Grating holes 12 mm Material extraction by blower Blowing power 15 kW Electrical cabinet Spares : 1 kit of new rotor + stator knives template for blades adjustment

Category: 309 mills
New in: used
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

MECCANOPLASTICA, MOLINARI, PREVIERO, INDUSTRIAL GRIDS for GRANULATORS and SHREDDERS Made on Constructors design Any size, any drilling configuration Made in stainless steel, FE steel, AISI 304, etc. as per Constructors specifications We supply original spare parts for all MECCANOPLASTICA grinders

Category: 309 mills
New in: 1992
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

PREVIERO GRINDER MU 408 N Construction year 1992 Infeed 410790 mm Granulation chamber 400800 mm Motor power 37 kw Rotating blades 3 Fixed blades 2 Grid 12 mm Extraction blower 15 kw Electric cabinet Tow group, 1 spare group of new knives (rotor+stator)

Category: 309 mills
New in: 2003
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller:

PREVIERO GRINDER MU 408 N Construction year 2003 Infeed 500900 mm Granulation chamber 400800 mm Motor power 75 kw Rotating blades 3 Fixed blades 2 Grid 12 mm Extraction blower 15 kW Electric cabinet Tow group

Category: 309 mills
New in: 2003
Location: 73525 Schwbisch Gmnd , Eutighofer Str. 144a
Seller:

Machine type SchneidmuehlenHerstellerGetechaModellSR 100Baujahr2003Zustand good (used) 20 pieces available!

Category: 309 mills
New in: used
Location: Meckesheim
Seller:

Infeed opening: 800 x 1000 mm Rotor width: 1000 mm Rotor Diameter: 800 mm Stator knives: 6x5 Rotor knives: 8x5 Only base machine: housing with rotor without Support Frame, drive, hopper Machine refurbished, with new bearings

Category: 309 mills
New in: used
Location: Renningen
Seller:

see pdf attached

Category: 309 mills
New in: used
Price 1.100 €
Location: Land-hu HU Budapest
Seller:

Engine 2.2 kW 2 pieces of it

Category: 309 mills
New in: used
Price 1.400 €
Location: Land-hu HU Budapest
Seller:

Engine 2.2-3 kW 2 pieces of it

Category: 309 mills
New in: used
Location: Land-fi FI
Seller:

Tria granulator with dust cyclones.

Category: 309 mills
New in: 1992
Location: Country- ,
Seller:

Hosokawa Mikropul mill ACM 2 for sale. The mill is complete and consists of the following parts: mill, cyclone, filter, fan, control cabinet, piping Like, you can visit the built mill in Arnsberg.

Category: 309 mills
New in: 1990
Location: Land-de DE
Seller:

Output: 100-500kg/h, milling chamber diameter: 600mm, motor power: 45kW, length: 1800mm, width: 1650mm, height: 1220mm, granulate storage container dimensions: 700x1200mm, machine including extraction, granulate pre-separator, compressore, hot melt granulator, screw and intermediate container.

Category: 309 mills
New in: used
Location: Country- ,
Seller:

Powerful granulator for batch or continuous crushing of tough, medium-hard, soft, tough, elastic, fibrous and temperature-sensitive materials (E.g. spices and drugs slightly oily) or heterogeneous material mixtures. Easy to clean. Equipment: Power 695 rpm at 50 HZ 1500 Watt rated output screen size 4 x 4 mm 6-disc rotor with 18 interchangeable indexable carbide multi-purpose 5 litre container cascade funnel-wide 550 x height 1415 x depth 600 mm weight 119 kg

Category: 309 mills
New in: 1986
Location: Land-fi FI
Seller:

Year 1986 75 kW motor. Feeding conveyor with metal detector. Dust collector. Available in August.

Category: 309 mills
New in: used
Location: Essenbach
Seller:

-Granulating machine for plastic injection moulding parts -Shredder - CA 22 kW

Category: 309 mills
New in: used
Location: Land-de DE
Seller:

Convenient for shredding plastics.

Category: 309 mills
New in: 2003
Location: Country- ,
Seller:

Hosokawa Alpine, APP 400 fine mill, good bebrauchter condition Because the classifying wheel of the Powderplex mill sits on and co-rotates with the grinding disc, only one rotor, one bearing unit and one drive are necessary. Dependent on the required product fineness, the APP is equipped to order with a classifying wheel for coarse, medium or fine separations. A spacer is used to effect a rigid connection between the classifying wheel and the grinding disc.

Category: 309 mills
New in: used
Location: St. Gallen
Seller:

Feeding width (mm): 680 Engine specifications: V: 380 A: 23 PS: 15 Kw: 11 cos: 0,82 U/min: 50Hz

Category: 309 mills
New in: used
Location: St. Gallen
Seller:

Feeding width (mm): 680 Engine specifications: V: 380 A: 23 PS: 15 Kw: 11 cos: 0,82 U/min: 50Hz

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)