used Cutting mills for sale

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Rotor diameter: approx. 300 mm Rotor width: approx. 600 mm Stator knives: 2 Rotor blades: 3 Drive: 15 kW Parts in contact with the product in stainless steel

Inlet opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 3 Drive: 18.50 kW Feed opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 Stator knives: 3 Rotor knives: 3 Drive: 18.50 kW

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Cumberland mill, with suction and frame, engine 18,5 Kw.,400 V.

Shredder mill with blades Make: Cumberland, open rotor, cutting chamber: 410x360 mm, motor: 10 hp

Inlet opening: approx. 340 x 520 mm Rotor width: approx. 520 mm Rotor diameter: approx. 340 mm Stator knives: 2 Rotor blades: 4 Drive: 18.5 kW

Shredder mill with blades brand: Eurotecno, model: MCV 120 653, cutting chamber: 1170x700 mm. open rotor inclined cut, hydraulic hopper opening and grill. Engine: 75 hp

Shredder mill with blades. Brand: Eurotecno, model: MGV 150/53, cutting chamber: 1500x800 mm, motor: 132 kw (180 hp). Multi-blade open rotor. 5 rows of blades on the stepped rotor, inclined cut, hydraulic hopper opening and grill. New rotor assembled and used spare rotor. Crushed mill of occasion 100% revised and with guarantee. Discover the best recycling machinery for plastics. Gester offers crusher, crusher, second-hand mill at an unbeatable price with new machinery features. Contact us! Constructed with a rigid steel structure, they are specifically designed to meet the needs of hard-to-shred recycling materials such as pipe, films, sheets and large solid materials. The scheme of operation of the crusher mill is by driving a hydraulic caisson that pushes the material against the toothed roller that thanks to its rotation and the action of a counter slat, performs the pre-br ...

Shredder mill with blades Brand: Folcieri, cutting chamber: 500x280 mm, motor: 30 kw (40 hp). Open rotor, inclined cut. With electrical panel.

Cutting mill - Franz Müller SM152 Year of construction: 2005 Description: Slow-turning granulator with gearbox Power: 2.2 kW 2 stator knives, 12 rotor blades, the sieve - interchangeable Hopper inlet: 390x390 mm Grinding chamber opening: 190x185 mm Mill is suitable for crushing the long plastic parts Hole for material case is prepared for connection with suction conveyor It is very easy to clean the mill, which is especially recommended if the color of the ground fabric is changed often Price: On request

Cutting mills Drive with 4 New Knives Drive General Overhauled as a replacement for Getecha cutting mills . Pradler Machines Service Service for temperature control / cutting mills / drying

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Dzk8qe Stator knives: 2 Drive: 7.5 kW Double slope With roller feeder, electric switch box and soundproofing box

Inlet: approx. 500 x 490 mm Rotor width: approx. 500 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor blades: 3

Inlet: approx. 600 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 450 mm Stator knife: 3 Rotor blade: 4 x 2 Drive: 45 kW

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5

Cutting mill with forced feeding by screw entry Capacity approx. 2-2.5 t/h (hollow body) Rotor 600 mm diameter x 1000 mm width with 7 blades Housing hydraulically hinged with 3 stator knives Drive motor 90 kW Overhauled, prepared on request for wet grinding with steel construction

According to the description below

Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Motor: 55 kW

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Cutting mill for plastic film, standing (pictured lying in the photos). Can be integrated into the die cutter, including foil feeder and two motors. No other accessories. Visit possible by arrangement. Errors and errors excluded, sale takes place in the exclusion of the statutory warranty.

Stock # U2404-1 Used cutting mill by Inan Plastik (TU) model 45 80. Mill has top feeding inlet with dimensions 780 mm x 540 mm. Open type rotor with three rows of knives, in total there are six knives mounted. Rotor has diameter 450 mm x width 800 mm and is belt driven by el motor 37 kW, 1475 rpm, 400 V, 50 hz. Mill has a carbon steel screen with perforations diameter 5 mm. Screen is lowered manually, the top of milling chamber and chute are rised hydraulically by device driven by el motor 1.5 kW. Product from milling chamber falls to screw conveyer driven by reducer and el motor 1.5 kW. Mill is mounted inside insulated, soundproof housing with access doors from the front and back. There are also included: a rotary fan driven by el motor 5.5 kW, 2930 rpm, 400 V, 50 hz, and vertical dust filter-cyclone, with bottom discharge through rotary valve. Machine has electric control cabinet an ...

Shredder mill with cutting chamber blades: 1430 x 600. Open rotor: 5 rows on the inclined cutting rotor. Motor: 132kw. Electrical panel with electronic starter. Vacuum cleaner: 15 kw (20 hp) at 3000 rpm. Cyclone and double support for 2 big-bags. 3 sets of spare blades, 2 spare grills: 10 mm each.

Ripper 1 shaft With hydraulic pusher, brand: Laiotz, model: R-820/1000, cutting chamber: 800x800 mm, motor: 100 hp, rotor: 800x600 mm, blades: 40x40. Electrical panel. At Gester we know that rip mills are indispensable machines in the plastic market, designed to reduce the size of different types of parts, by crushing them. Machine oriented to the rough crumbling of a wide range of dimensions of raw material such as films, obtaining final granulometries less than 50mm. The feeding system will be adapted to the type of plastic to be crushed (hardness, size, shape) to obtain the maximum performance of the mill.

Shredder mill with blades Brand: Maquiplast. Cutting chamber: 1000x800 mm with 5 rows of blades on the rotor. Motor: 125 hp and electrical panel.

Cutting mill - Martiplast Year of construction: Description: Slow-raining granulator with gearbox Power: 2.2 kW 2 stator knives, 2 x joints, rotor with the milling cutters Hopper inlet: 230x300 mm Grinding chamber opening: 230x230 mm Cutting mill without sieve, regulation of the grinding thickness by means of the hole adjustment between milling machine and stator knife Granulate mill is used to grind the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor Price: On request

Shredder mill with blades brand: Mateu i sole, model: B-10, with cutting chamber: 450X280 mm. open rotor, 2 rows of blades in the rotor, soundproof hopper. Motor: 15 hp (11 kw) and electrical panel.

Shredder mill with blades Brand: Mateu I Solé, model: B-10, cutting chamber: 450x280 mm, motor: 15 hp. With three-angle star electrical panel.

Shredder mill with blades Brand: Mateu & Solé, model: B-25, cutting chamber: 680x380 mm, motor: 25 hp. Stepped rotor and electrical panel.

Shredder mill with blades Brand: Mateu I Solé, model: B-40, cutting chamber: 710x520 mm, motor: 40 hp. Step rotor, flywheel, vacuum cleaner: 4 Kw (5.5 hp). With electrical panel.

Shredder mill with blades brand: Mateu and sole, type: B-40, with cutting chamber: 700 x 530 with stepped rotor with motor: 40 hp and electrical panel.

Shredder mill with blades Brand: Mateu I Solé, model: B-40, cutting chamber: 700x530 mm, motor: 30 Kw (40 hp), year: 1998. Step rotor, vacuum cleaner: 1.5 Kw (2 hp) and silo: 2,000 L. With electrical panel.

Shredder mill with blades Brand: Mateu I solé, model: CB-M20-BR, cutting chamber: 450x250 mm, motor: 15 kw (20 hp), soundproofed, open rotor, inclined and stepped cut. Vacuum cleaner: 1.5 kw (2 hp)

Shredder mill with blades Brand: Mecanofil (Mateu I Solé), model: 28/45M, cutting chamber: 450x280 mm, motor: 10 hp, stepped rotor. With electrical panel.

Cutting mill - Moditec G2ACPS Year of construction: Description: Slow-raining granulator with gearbox 6 stator knives, 2 x joints, rotor with the milling cutters Cutting mill without sieve, regulation of the grinding thickness by means of the hole adjustment between milling machine and stator knife Granulate mill is used to grind the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor Price: On request

For sale is the following article: Cutting mill Profile mill Möser 30 KW, Throughput: up to 250kg/h (depending on plastic and parts) Manufacturer: Möser Accessories: silo/cyclone, 1 suction blower, 3-4 perforated screens (8-10mm grain size), 2 sets of knives, control cabinet for switching on and off. Complete pipe system More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Mill is still built and connected to electricity. You are welcome to look at them and try them out. Pick-up by arrangement and dismantling possible promptly.

Inlet opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

Shredder mill with blades Brand: Navarro, motor: 30 hp, cutting chamber: 450x400 mm, electrical panel. With opening and closing, hydraulic hopper and soundproof hopper.

Shredder mill with blades Brand: Navarro, cutting chamber: 500x450 mm, motor: 30 hp. Extraction of side grille, water-cooled bearings and electrical panel.

Shredder mill with blades Brand: Navarro, model: Forxa-600, cutting chamber: 650x600 mm, motor: 55 Kw (75 hp). Water-cooled rotor with mechanical hopper opening. With electrical panel.

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

cutting mill, heavy duty with hydraulic tilting hopper for feeding pipes / profiles (up to 6 m) Drive 90 kW

Cutting mill with compact sound insulation Drive 30 kW Working width: 600 mm Rotor diameter: 450 mm with electric control with manual feed funnel Housing opening: lifting spindle (manually operated) with fan 7.5 kW Screen insert: 8 mm

Cutting mill with compact sound insulation Drive 30 kW with electric control with manual feed funnel Housing opening: lifting spindle (manually operated) with fan 7.5 kW Screen insert: 8 mm