subcategories
(3rd category level)
Manufacturer:
(Category: 703)
Used Alpina clipping machine type DKF 18.15. Technical data: Voltage 380 V Number of phases 3 Frequency 50 Hz Pressure 8 bar
Risco RS1040 MAS Vacuum stuffer Serial: A003004 Stainless, 50L agitated hopper, variable speed, portions from 5 to 10000g, 2.3KW, with manual, 3Ph
REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm
Bacon Cutter Treif Felix 100 CE Stainless Steel, 400 V, 3 A, 1.0 kW, 173.5 kg, shelf PE, feed chute 30x10x10 cm, phase turner, rotating field detection, 1 gate set, 1 spare knife, total dimensions 95x75x105 cm, bacon, ham, sausage and other types of meat can be cut just as easily as cheese, fish, fruit and vegetables, capacity approx. 800 kg / h, year of construction 2009
Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph
Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph
Kaj Olesen TWP54 Pin Bone remover Serial: 10810 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph
Type: TGR103 Serial number: 700292 Year of construction: 2020, never used! Hole plate diameter: Unger, H82 3-piece Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 500 x 500 x 500 mm Weight: 61 kg With built-in compressor to cool hopper Machine is never used, new out of the box
Type: TBS19KT Serial number: 700045 Year of construction: 2019, never used Cutting height: max 230 mm Cutting width: max 190 mm Saw blade: 1750 x 16 x 0.45 mm Saw speed: 17 m/sec Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 490 x 620 x 1000 mm Weight: 87 kg Machine never used, new out of the box
Type: TG105 Serial number: 603429 Year of construction: 2018, never used Hole plate diameter: Enterprise E32 Hopper: 42 litres Power: 3 x 220V, 50Hz, 2.2kW Dimensions: 700 x 580 x 490 mm Weight: 62 kg Never used, new out of the box
Type: TG101 Serial number: 700261 Year of construction: 2020, never used! Hole plate diameter: Enterprise E22 Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 370 x 350 x 430 mm Weight: 39 kg Machine never used, new out of the box
Type: EFR2000/450 Serial number: 1713 Year of construction: 2008 Belt width: 450 mm Frying length: 2000 mm Frying time: 25 - 250 sec Heating: electric, 95 kW Power: 3 x 400V, 50Hz, 102kW Dimensions: 4950 x 2100 x 3600 mm Weight: 1900 kg Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level control Prepared for CO² fire extinguisher Separate infeed conveyor
Laska mobile micro cutter -Model: FZ 225 -Power: 132 kW -Dimensions: 2220 x 1170 x 1280 mm -Set diameter: 225 mm -Hopper capacity: 200 L -Weight: 1500 kg -Power supply: 400 V 50 Hz 3N -Cutting set and additional parts included -Stock quantity: 1 -Condition: used
Karpowicz injector -Type: NK-27 -Power: 7.5 kW -Capacity: up to 1500 kg/h -Power supply: 400V 50Hz 3N -Belt width: 400 mm -Needle diameter: 2 mm -Number of needles: 27 -Dimensions: 1800 x 880 x 2100 mm -Weight: 300 kg -Made of acid-resistant steel -Quantity in stock: 1 -Condition: used/overhauled
Vacuum filler Vemag -Model: Robot DP10C -Power: 15 kW -Capacity: 6000 kg/h -Portion range: from 5 to 60,000 g -Hopper capacity: 250 L -Power supply: 380V, 50Hz -Vacuum pump: 20 m3/h -Made of stainless steel -Dimensions: 2450 x 1350 x 2200 -Weight: 1300 kg -Quantity in stock: 1 -Condition: used
Cutting line WEBER SLC 602 with Slicer CCS 602 with CCW scale (up to 1,000 g) with CCR seesaw (sorting belt) with inlay line CCA with CFS thermoforming vacuum packaging line TIROMAT POWERPACK type 660 with Metal Detector LOMA IQ3 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60
120 liter K+G WETTER Cutter Mixer / Cutter Type: CUTMIX 120 STL / CM 120 Model: 420 Machine number: 420 / 1389 Year of Make: 2020 only 148 operating hours Infinitely programmable knife speeds Infinitely programmable mixing speeds (forward + backward) Infinitely programmable dish speeds electric knife lid lift Removable dam wall Intervention protection and flap Hydraulic loading for 200 litre cutter wagons hydraulic product ejector Touch control Preparation for K+G WETTER Cut-Control 6 mm cutter head Rated power: 43 kW Fuse: 100 amps used, very good condition - very little used
MADO Selekta 2 MKB651 Bone Band Saw completely made of stainless steel with motor brake Safety shutdown of the door without function a rubber foot is missing otherwise in good condition, must be cleaned thoroughly before use Video about test run available
High-performance double-sided contact cooking. The Formcook Contact Cooker is excellent for cooking boneless products such as chicken fillets, meat patties, steak, bacon, pancakes, fish fillets, shrimp and vegetables. This cooker has been used to fry vegan products like buns and steaks. The machine was last used in February 2025. Fat-free contact cooking with non-stick belts seals the natural juices and fats in the product for the highest eating quality and minimum cooking losses. The cooking time is adjustable. The Formcook Contact Cooker is manufactured by JBT Corporation in Sweden. More information is available at JBT’s homepage. A conveyor machine manufactured by Ilpra is included. The contact cooker and the conveyor are complete and ready for use.
Type: DCC2500/650 Serial number: 186 Year of construction: 2001 Belt width: 650 mm Infeed height: 2050 mm Outfeed height: 950 mm Pitch: 250 mm Belt speed: 1 - 10 m/min Power: 3 x 415V, 50Hz, 0.18kW Dimensions: 2850 x 1250 x 2150 mm Weight: 220 kg
Type: Qbo120-3-316-SGPV Serial number: 2304023123006 Year of construction: 2012 Bowl: 120 litres Speed: 0 - 2000 RPM Infeed height: 1450 mm Heating: steam, 160 kg/h Compressed air: 6-8 Bar, 20 l/min Power: 3 x 400V, 50Hz, 22kW Dimensions: 1800 x 1750 x 1800 mm Weight: 900 kg With automatic mixing, vacuum, double jacket and steam injection Automatic lid and tilting
Type: FGM 48 SW Serial number: 9518-2004 Year of construction: 2004 Belt width: 420 mm Needles: 2 x 48 needles of 4 mm Stroke height: 150 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 8.7kW Dimensions: 2250 x 800 x 2450 mm Weight: 700 kg With FM80 protein filter For bone-in and boneless meat Fomaco filter Type: PFS 5/225 CS Serial number: 9520-2004 Year of construction: 2004 Dimensions: 1750 x 650 x 1100 mm Weight: 100 kg
Type: FGM 64 SW Serial number: 9103-2003 Year of construction: 2003 Needles: 2 x 64 needles of 4 mm Belt width: 550 mm, walking beam Stroke height: 150 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 22A Dimensions: 2350 x 950 x 2450 mm Weight: 900 kg With FM80 protein filter For bone-in and boneless products Fomaco rotating filter Type: PFS 5/225 RCS Serial number: 8955-2002 Year of construction: 2002 Dimensions: 1900 x 700 x 1000 mm Weight: 100 kg
Type: FGM 48 SC Serial number: 8464-2001 Year of construction: 2001 Belt width: 400 mm Needles: 2 x 48 needles of 3 mm Speed: 20 - 70 strokes/min Stroke: 60 mm Stroke height: 150 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 8.6kW Dimensions: 2300 x 800 x 2300 mm Weight: 700 kg With FM80 protein filter Fomaco filter Type: PFS 5/225 CS Serial number: 8466 2001 Year of construction: 2001 Dimensions: 1850 x 700 x 800 mm Weight: 100 kg
Product number: 3092B Type: VVM 300.D Serial number: 235/08 Year of construction: 2008 Content: 300 litres Heating: steam, 40 kg/h Kettle inside size: 900 x 790 x 480 mm Basket size: 830 x 700 x 430 mm Infeed height: 950 mm Outfeed height: 300 mm Outfeed valve: DN40 Power: 3 x 400V, 50Hz, 0.5kW Dimensions: 1400 x 1100 x 1050 mm Weight: 360 kg
Cyclone for Gutting Machines This cyclone is designed for collecting intestines from Baader 142 Fish Gutting Machine (from several machines simultaneously) or similar machines where waste collection is required using a vacuum. Diameter: 1500 mm, Cylinder height: 1880 mm, Cone height: 530 mm, Total height (with legs): 3440 mm +/- 100 mm (legs are adjustable). Bottom flange: 275 mm outer diameter, 150 mm inner diameter. Connection flanges: 340 mm outer diameter, 215 mm inner diameter.
Traust Salt Spreading System with 2 stations. Automatic salt spreaders and re-salting equipment significantly reduce labor and simplify the process. The Traust Salting System is now employed by the largest salt fish producers worldwide. This method for salt fish production offers easier control, proper salting techniques, and improved ergonomics. This dependable Traust Salt Spreading System includes an Automated Salt Spreader that evenly distributes salt over the fish, Salt Feeding Equipment for the spreaders, and Re-salting Equipment. The system is compatible with all standard fish tubs. Features: Higher capacity Higher yield Shorter curing time Reduced operation cost Easier work Higher product quality No shoveling of salt Whiter fish Better use of available space
Hobart mincer Stainless mincer, 150mm mincing plate diameter, with spare plate and blade, 3Ph
Used autoclave ASCA, type: 250 E -renewed- - Boiler capacity: 250 litres - Electrically heated - Boiler, core temperature and F-value adjustable - New temperature sensor - New drain hose - Electrics completely checked - Digital control - Auto-signaling - Device on wheels, mobile - Condition: Very good, ready to use The device is in pristine condition and is ready to use right out of the box. Visits and test runs are possible by arrangement.
Baader 427 V-Cut Heading Machine This high-quality fish heading machine is designed for being used with BAADER filleting machines and tuned to their throughput rate. It heads various types of fish such as haddock sea trout, cod, saithe, and salmon, both bled or unbled, in a particular meat-saving manner. The V-cut is performed directly behind the collarbone. Spikes holding the head, control flaps, and a knife head controlled by the thickness of the fish always make for an optimal head cut. The machine processes a size range from abt. 45 to 95 cm in total length. Fitted with an additional tail cutter, the version BAADER 427 is used for the processing of tuna. Throughput rate as a function of the fish size tuned to the filleting machine Operator requirements: 1 person Power Consumption 2 kW Max. water consumption 10 l/min Dimensions approx. 1,75×1,00×1,95 m Created for shipp ...
