subcategories
(3rd category level)
Manufacturer:
(Category: 703)
MHS ICC 28S with camera system for accurate portioning, The ICC 28 is MHS’s high performance slicing machine. The main absolute benefit lies in the continuous production flow, which is additionally supported by a gripper. This allows a portioning of the products. With the continuous loading, an hourly rate of up to 4 tons is possible. Among the standard products, MHS’s innovative continuous slicers redefine economic efficiency and productivity., The ICC 28 slices: Meat, chops, necks, pork belly, roulades, roasts, sausage products, cold cuts, cheese., More information, photos and a video soon
Cold room/ cold room/ cold store/ cold store Models Used cooling chambers/cold rooms for connection to an external unit in various designs (L 220 - 625cm, W 150cm, H 200-260cm) can be sold at a reasonable price. The following versions are currently available: L 300 cm | W 150 cm | H 260 cm Cold room, used goods • External dimensions (L x W x H): approx. 300 x 150 x 260 cm • Cold room area: approx. 4.5 m² • For connection to an external refrigeration unit, not included. L 625 cm | W 150 cm | H 260 cm Cold room, used goods • External dimensions (L x W x H): approx. 625 x 150 x 260 cm • Cold room area: approx. 9.3 m² • For connection to an external refrigeration unit, not included. L 220 cm | W 150 cm | H 200 cm Cold room, used goods • External dimensions (L x W x H): approx. 220 x 150 x 200 cm • Cold room area: approx. 3.3 m² • For connectio ...
Tumbler with cooling system Manufacturer: Gunther Model: GPA 500K Made of stainless steel Dimensions: 2200 x 1650 x 2550mm Volume: 500 liters Electric power: 3.5kW
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 3700 liters Machine dimensions in cm: Length: 226 Width: 395 Height: 260 Electric power: 15kW
Type: ScrewLoader I 400 Serial number: 1026 Year of construction: 2013 Diameter screw: 400 mm Length screw: 4500 mm Pitch: 300 mm Infeed height: 820 mm Outfeed height: 2500 mm Power: 3 x 380V, 50Hz, 8.25 kW Dimensions: 5000 x 1700 x 1900 mm (transport) Weight: 1200 kg
Type: ProMix 1000 Serial number: E011140705022 Year of construction: 2020 Mixer: 1000 litres Capacity: max 650 kg Infeed height: 1900 mm Cooling: Nitrogen, LN2, 48 kg/min Nozzles: 4 pcs. Exhaust: 3600 m³/h Compressed air: 7 -12 Bar, 20 Nl/min. Power: 3 x 400V, 50Hz, 10kW Dimensions: 2850 x 2100 x 2450 mm Weight: 2150 kg With double exit for 200L tote bins Including inspection platform GEA / Kittner ColumnLoader Type: 300S Serial number: E011270605550 Year of construction: 2020 Capacity: max 300 kg Lifting speed: 5 m/min Tilting height: 1650 - 2250 mm Power: 3 x 400V, 50Hz, 0.75kW Dimensions: 1000 x 1320 x 3100 mm Weight: 350 kg
Type: AutoGrind 200 Serial number: 1140 Year of construction: 2013 Hole plate diameter: 200 mm Hopper: 250 litres Infeed height: 1900 mm Power: 3 x 400V, 50Hz, 74kW Dimensions: 2250 x 1450 x 2700 mm Weight: 2620 kg With level sensor, trip wire and hopper guide for blocks Including tool trolley
Type: TSO 600/96/4 EL Serial number: 1044642 Year of construction: 2015 Model: counter-clock-rotated, left hand execution Belt width: 600 mm Tiers: 2 x 4 pc. Poruct gap: 135 mm Heating: electric, 4 x 100 kW Steam: 7.5 - 8 Bar, max 1500 kg/h Power: 3 x 400V, 50Hz, 440kW Dimensions: 11040 x 3994 x 3287 mm Weight: 20000 kg With Novatech hygrophil, CIP
We are selling here a frozen meat slicer from the manufacturer FMS GmbH in a very good used and functional condition. The machine runs on 400 volts, completely stainless steel, rollable, passage 38 cm wide, for chopping frozen meat, workshop tested, dimensions W/D/H 70/95/90 cm, others on request.
We are selling here a vacuum sealer from the manufacturer Vama, type VP 900 in a very good used and functional condition. The device was built in 2012, runs on 400 volts, 5 kW, 160 pump, with gassing, welding bar right/left, chamber size 53/53/17 cm, rollable, workshop tested, immediately ready for use, dimensions W/D/H 85/75/95 cm, others on request.
We are selling here a belt descaler from the manufacturer Maja, type ESB 441 in a good used and functional condition. Runs on 400 volts, bandwidth 37 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 65/90/115 cm, others on request.
Manufacturer: Handtmann Intestinal Holding Device Type 60-6 ( for long filling tube ) for filling machine HANDTMANN VF 50, 80, 100, 200, 300 i all VF 600 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
REF-2049 BIZERBA A 404 FB AUTOMATIC SLICER Automatic slicer manufactured by Bizerba Machine number: 10597824 Model: A 404 FB Year: 2009 30-55 strokes/min Slice thickness: 0.5-12 mm Cutting carriage: 400 mm Overall dimensions: 1,560 mm length, 1,000 mm width, 1,540 mm height
REF-2368 HOBART CNA-L CONVEYOR RACK-TYPE DISHWASHER Conveyorized rack-type dishwasher. Manufacturer: HOBART. Model: CNA-L. Serial no.: 86463655. Year: 2007. 26.30 kW/50.30 A. 380-415 V/50 Hz/3-phase. Throughput: 180 racks/3,240 plates per hour (120 racks according to DIN 10510). Complete with HOBART heat pump. Pump model: CHP 18. Serial no.: 692. Year: 2007. Refrigerant type: R134a (capacity 3.2 kg). Maximum pressure: high side 28 bar; low side 8 bar. Compressor: maximum flow rate 17 m3/h; 2,900 rpm. Inside dimensions: width 510 mm, height 460 mm. Overall dimensions: length 3,200 mm, width 800 mm, height 2,150 mm. With large” high-performance pre-wash zone, as well as washing, rinsing and drying zones. Made of high-grade stainless steel. SMARTRONIC electronic control. Including 2 speeds, emergency stop and main switch. Efficient dual-rinse system. In-buil ...
Used Alpina clipping machine type DKF 18.15. Technical data: Voltage 380 V Number of phases 3 Frequency 50 Hz Pressure 8 bar
Risco RS1040 MAS Vacuum stuffer Serial: A003004 Stainless, 50L agitated hopper, variable speed, portions from 5 to 10000g, 2.3KW, with manual, 3Ph
REF-2574 FAC PR-2 RECTANGULAR 2D SHAPING PRESS FOR BONELESS CURED HAM Two-dimensional press for shaping boneless cured hams into rectangular blocks. Manufacturer: FAC Model: PR-2 Serial no.: 28120-011 Year: 2007 Voltage/Frequence: 400 V/50 Hz Power: 4 kW Air pressure: 4-6 bar Hydraulic pressure: 160 bar Output: 60-240 pcs/hour Overall dimensions: width 1,660 mm, length 1,600 mm, height 2,060 mm Weight: approx. 2,400 kg All AISI 304 stainless steel. Rectangular moulds also made of stainless steel. Counter-moulds made of technical plastic. Hydraulic operation. 2D cyclical massaging and pressing system by means of a vertical and a horizontal cylinder. Adjustable massaging and pressing time. The cylinders compress the ham against the mould in sequential cycles of pressing and pause, thus obtaining a uniform product suitable for the subsequent slicing.
REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm
Bacon Cutter Treif Felix 100 CE Stainless Steel, 400 V, 3 A, 1.0 kW, 173.5 kg, shelf PE, feed chute 30x10x10 cm, phase turner, rotating field detection, 1 gate set, 1 spare knife, total dimensions 95x75x105 cm, bacon, ham, sausage and other types of meat can be cut just as easily as cheese, fish, fruit and vegetables, capacity approx. 800 kg / h, year of construction 2009
Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph
Weber ASE 553 skinning machine, with compressed air connection, some bearings and seals replaced, Connection 400V, dimensions LxWxH approx. 60x57x102cm, weight approx. 175kg, very good used condition, fully functional
Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph
Kaj Olesen TWP54 Pin Bone remover Serial: 10810 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph
Type: IQ3 Serial number: MD301-12330D Year of construction: 2010 Belt width: 295 mm Passage: 350 x 110 mm Compressed air: 6 Bar Power: 3 x 415V, 50Hz, 1.2A Dimensions: 1850 x 1050 x 1200 mm With pneumatic reject
Type: IQ3+ Serial number: DMC080228-07625D Year of construction: 2008 Belt width: 600 mm Passage: 640 x 100 mm Power: 3 x 380V, 50Hz, 1.2A Dimensions: 1800 x 1200 x 1300 mm
Type: TGR103 Serial number: 700292 Year of construction: 2020, never used! Hole plate diameter: Unger, H82 3-piece Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 500 x 500 x 500 mm Weight: 61 kg With built-in compressor to cool hopper Machine is never used, new out of the box
1. Forming machine: ALCO / JBT AFM 400 PC The ALCO / JBT AFM 400 PC Forming Machine is a high-performance machine designed to form food products of various shapes and sizes. Thanks to a precise pressure system, the machine can mold raw meat, fish, vegetable and other food masses into molds of attractive 2D and 3D shapes. Tank capacity: 270 liters, which allows for long production cycles without the need for frequent filling. Die width: 400 mm, with the ability to custom design die shapes. Maximum volume per stroke: ± 1.47 kg, enabling production of large portions in a short time. Maximum number of strokes: 50 per minute, which translates into high productivity. Materials: made entirely of stainless steel for durability and easy cleaning. Dimensions: ± 2800 x 900 x 2100 mm, making the machine compact and easy to integrate with other components of the production line. Weight: 1 ...
Type: TBS19KT Serial number: 700045 Year of construction: 2019, never used Cutting height: max 230 mm Cutting width: max 190 mm Saw blade: 1750 x 16 x 0.45 mm Saw speed: 17 m/sec Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 490 x 620 x 1000 mm Weight: 87 kg Machine never used, new out of the box
Type: TG105 Serial number: 603429 Year of construction: 2018, never used Hole plate diameter: Enterprise E32 Hopper: 42 litres Power: 3 x 220V, 50Hz, 2.2kW Dimensions: 700 x 580 x 490 mm Weight: 62 kg Never used, new out of the box
STC Food Solutions
