up 500 used for sale

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5  ...

GEARBOX INFO Listing ID 20103 Make REINTJES Model WAV 500 B Serial No. 46816 Power 588 KW RPM 1900 RPM REDUCTION 5.158:1 General Info Condition Runner Application Marine Weight (kg) 1355 KG

Type: Robot 500 Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Double screw Standard double screw housing Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Lenght: 80 Height: 155 Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Key data: 500 , 130 , 35

Manufacturer: Battenfeld Type: BA 500/210 TM Built: 2000 Control: Unilog B2 Closing force: 500 kN Closing type: Knee lever Tie bar distance: 320 mm x 320 mm Plate size: 490 mm x 490 mm Tool installation height: min 150 mm max 350 mm Opening distance: 250 mm Plate spacing max.: 600 mm Screw: 35 mm Lifting volume: 144 cc Spray weight PS: 130 gram PS Spray pressure: 1500 bar General Engine: 11 kW Heating: 10.4 kW Dimensions: 3.3 m x 1.1 m x 1.7 m Weight: 2500 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted

Pressure air compressor, make CompAir / Geveke, type: VMHD 500, for 735 rpm, 21.5 bar, built 1985.

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Robust, high-quality heavy beading and flanging machine with electric motor drive, electromotor bending roller delivery and electromotor displacement of the stop plate Largest sheet thickness that can be reshaped – 6 mm steel sheet/ST40, maximum extension 500 mm, maximum distance between the top and lower roller 48 mm, two working speeds 3 and 27 rpm – available at an additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 3 kW + 0.75 kW, weight 1.150 kg

Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C

DATA ON THE MACHINE Machine type: Roller curve conveyor / 90 degrees Manufacturer: Transnorm Model: 816-500 Built: 2007 Condition: very good (used) Price 1,200 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221 Description We offer you a used roller conveyor from the manufacturer Transnorm, incl. feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

Gluing machine Hunkeler LAM 500; good condition; cleaned and tested; Working width 500mm; Cold glue; Hot glue is prepared, can be retrofitted. Gluing machine Hunkeler LAM 500; good condition; cleaned and checked; working width 500mm; used for cold glue; option for hot glue installed.

RUIAN QUEENSENSE MACHINE DHB-500 film glove production line manufactured in 2020 by Chinese company RUIAN QUEENSENSE MACHINE CO.LTD. is used to produce double-layer foil gloves. The produced gloves, used for example in grocery shops or in production, guarantee effective protection against viruses and bacteria. The QUEENSENSE DHB-500 automatic disposable gloves production line consists of two identical machines, both of which feature a central drive to control all glove-forming mechanisms. The dual unwinding station is equipped with a clutch, which allows infinite adjustment of the film tension and dual inverters for unwinding control. High-precision feeding of HDPE or LDPE material to the sealing position and the final product sorting point is ensured by the installed servo drives controlling the entire process. After changing the heat sealing dies, the RUIAN QUEENSENSE MACHINE DHB ...

Used cryogenic mill model PCJ-500. Machine for grinding the product cooled with liquid nitrogen, made of 304 stainless steel, 16 mm thick, externally dimensioned: - length: 6844 mm - width: 2132 mm - height: 3588 mm. Focused on grinding the product based on liquid nitrogen, which allows achieving a temperature of -196 ° C. Liquid nitrogen does not come into contact with the product, it is the source of this low temperature. The cryogenic mill requires a nominal power consumption of 40.45 kW, at 380V, 50Hz.

Rip-off saw for cutting waste material (SLABS). Suitable for processing waste after an angle circular saw. Combined woodworking machine for processing waste material. It offers a two-in-one solution. In one pass, the machine cuts a board from a semicircle (slab), which cuts the spreading unit to the desired, quickly adjustable size. The machine can be used for cutting/deburring prismatic materials, but also for waste processing with one machine. The configuration of the machine and its parameters is carried out by arrangement. Technical parameters of the horizontal unit: Main engine power: 2 x 11 kW Feed motor power: 1.1 kW Minimum height of the starting material: 15 mm Minimum material length: 2000 mm Maximum material length: unlimited Maximum height of the starting material: 100 mm Technical parameters of the vertical unit: Main engine power: 2 x 7.5 kW Minimu ...

Mobile ring trough mixer with 2 exchangeable mixing blades and 1 exchangeable side scraper for mixing smaller quantities of concrete.

RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

Manufacturer: Arburg Type: 320 C 500 - 170 Year of construction: 11/2006 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Lifting volume: 115 ccm / 105 gram PS Injection pressure: 1470 bar general Engine: 11 kW Heating: 9.4 kW Dimensions: 3.4 m x 1.4 m x 1.9 m Weight: 2430 kg Screen text: German Additional equipment Core train x1

CARRAGARM RACK NEW Data: H : approx. 416 cm D : approx. 137 cm L : approx. 402 cm Cantilever : approx. 120 cm Axial distance : 131 cm NEW GOODS immediately from stock. 500 kg load per arm 2250 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: 04 x stand, incl. stand approx. 416 cm made of IPE160. 12 x cantilever arms approx. 120 cm made of IPE 80 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pain ...

Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm

High-quality airpad machine from a reputable manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Usually, four air cushions are created per work cycle. Different formats can be produced. For this purpose, 10 programs are available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling levels can be produced. The resulting air cushion membranes are wound into rolls by means of a motorized device. When the roll is full, the machine automatically shuts down. Then the finished roll can be removed manually and then used as packaging material. The machine can be pushed over rollers and fixed by brakes. The machine can be demonstrated under electricity.

saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 715 mm table load: 500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-110 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 675 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum Press Rieter SP 560/500

Material conveyor belt LT-500 | Inclined conveyor belt for material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 500 mm Working length: 4000 mm Working speed: 15 m/min. Maximum head: 2200 mm Gearbox: Bonfiglioli 0,75 kWt Weight: 320 kg

arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GILDEMEISTER NEF Plus 500 CNC lathe was manufactured in 1997. The machine, designed for precision machining of workpieces with a maximum diameter of 500 mm, has two spindles (main spindle and sub-spindle) of high speed and power, which will improve even the most intensive machining. The installed GRUNDING CNC controller with colour screen and control panel also allows for cycles to control. The total weight of the machine is approximately 3000 kg. Technical specifications of the GILDEMEISTER NEF Plus 500 lathe - CNC control: GRUNDIG - maximum turning diameter (over bed): 500 mm - maximum turning diameter (over saddle): 290 mm - maximum turning length: 1500 mm - main spindle rotational speed range: 80-2800 rpm - main spindle passage: 70 mm - main spindle drive power: 11 kW - maximum sub-spindle rotational speed: 5000 rpm - sub-spindle drive power: 7.5 kW - total power require ...

Numer katalogowy 7309 DANE TECHNICZNE - max wysokość cięcia 170mm - max szerokość cięcia 510mm - max średnica piły 450mm - otwór tarczy 70mm - średnica wału 70mm z góry: - zapadki - 2 wały gładkie, poślizgowe z dołu: - 5 rolek wprowadzających, gładkich, poślizgowych - zapadki - wał ciągnący zębaty - wał z piłami - wał ciągnący zębaty - 5 rolek wyprowadzających, gładkich, poślizgowych - płynna regulacja prędkości posuwu - silnik posuwu około 3kW - silnik główny 22kW - średnica króćca odciągu 150mm - wymiary całkowite dł/szer/wys 4300x1600x1520mm - waga 1310kg – produkcji polskiej – dokumentacja DTR – wielopiła używana, stan bardzo dobry Net Price: 29900 PLN Net price: 6950 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

Cooling capacity: 3000 kcal/h coolant: dest. Wasser tank: 7,7 l volume capacity: 3 l/min operating pressure: 3,25 bar connected load: 0,5 kVA connected load frequency: 380 V • water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 480 mm : 610 x 450 saw band length: 5320 x 34 x 1,1 mm band speed: 15 - 100 m/min table height: 820 mm total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,8 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Height: 142 Delivery time: after advanced payment, one working day

Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...

MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND  ...

Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel

Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Key data: 4000 mm, 5000 mm

Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the  ...