british flag
Resale Logo

Category 407: thermoforming machines

back back back
 banner advertisement information every type of foil wrapping system  BluePack Machines GmbH  http://www.amtec-machines.com 
banner logo
start page > packaging machines > all thermoforming machines > results
 
77 offers order by
post used machinery: registration     
No. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
page 1 > 2 3 4
115930654  
GEA Powerpak

Rebuilt PowerPAK 665 af 430 mm media width New film chain 2015 / 2016 hub overhaul / Syed 2017 Total length 8.90 m Thermoforming station with Vorhezung Welding station with radiant heating and nozzle bar for fumigati ...
used machine
 
Rebuilt PowerPAK 665 af 430 mm media width
New film chain 2015 / 2016 hub overhaul / Syed 2017
Total length 8.90 m
Thermoforming station with Vorhezung
Welding station with radiant heating and nozzle bar for fumigation
Photo cell control with upper slide brake
Preferential motor stepless
Format record 143-2.3 with Peelecken and 223-2.2 (newly made)
2 cross-cutters and 2 cross cutting
Separate conveyor belt
Edge trim suction
Knees loading
1996
Price  
  DE   request
112265629
GEA FINNAH 21.500 E/H asep. Typ 2300
Deep drawing machines

D 122 a. One aseptic working deep drawing and filling machine Manufacturer is GEA Finnah,Type 2300 capacity is 21.600 units per hour Manufacturer year is: 1998 size of the cups: 90 mm x 75 mm deep drawing foil ...
used machine
 
D 122

a. One aseptic working deep drawing and filling machine
Manufacturer is GEA Finnah,Type 2300
capacity is 21.600 units per hour
Manufacturer year is: 1998
size of the cups: 90 mm x 75 mm
deep drawing foil material is PS

The dosing system of the filler can fill
75 g to 300 g, all deep drawing tools without 75 g
are available
The machine was still standing since June 2017
The dosing system of the FFV filler can fill per stroke
4 different colours

The GEA FFV filling machine has in the operator electronic
installed a Siemens S 5 equipment.


After filling procedure the lid foil, which was sterilized
with H2O2 was laying on the filled cups and the GEA machine
drag this under the sealing station.
After sealing was done, the closed cup quit the sterile tunnel
and going under the press.
The press of the GEA machine cut single cups and the single
cups arrive after this procedure the 4 lane Polycetting transport
conveyor.

The electronic system of the GEA Finnah filling machine and of
the sterile module is installed in 3 double door electronic cabinets.
The complete electronic system is active and sure available.
The machine is standing since Hune 2017-08-14

The sterile module is standing on the left side of the GEA filling
machine (running direction)
Configuration normal with 2 pipe heat exchanger and with sterile
module filter technique.

Replacement stamping press is available
It was be pressed in the past only single cups.

Further handling with the filled cups
b. Transport out of the GEA filling machine was well done
with a Polycetting transport conveyor, start with a 4-lane
plastic chain conveyor,
then reduction to 2 lanes and in the end (after 15 m) and
then with a 180 degree installed 1 lane conveyor curve
into the inlet of the Labeling machine

c. The inlet to the crones labeling machine is a 1-lane conveyor
2 label magazines are available
The both label spending unit spend on the wall of the rectangular
single cup in the same high 2 labels.
It seems like a cup body labelling, round about.

d. 1 fourfold fruit container connection plant and a
white soft cheese mixing station.
Configurated with vertical installed dynamic working
Burdose mixer.





e. Out of the Krones labeling machine the single qurk cups
with 4 fruit products will be transported with a 4-lane
plastic chain conveyor into the inlet of the tray packaging
machine.
4 different cup, 20 cups per tray was packed.
Manufacturer of the packaging machine is Schäfer&Flottmann.
The packaging produce from a carton flat a tray with 4 pile corners,
without cup grids, measurements are: 200 x 300 mm
The machine is working with Nordson glue technique.

f. The tray transport will be done with a plastic
chain conveyor from 1,20 m to 2,40 m high.
The tray are transport in a high of 2,40 m to the inlet
of the tray elevator.
The tray elevator lift the single tary one after one down
into the basement floor.
manufacturer transport conveyors is Polycetting,
manufacturer of the tray elevator is A&F.

g. In the basement floor is standing the tray layer palletizer machine
Manufacturer is A&F
with empty Euro and chep Pallete magazine
the filled pallet is transport over a small roller conveyor
outside of the palletizer machine,
over an roller conveyor corner seat to approx.
6 m roller conveyors.

The pallet doest need a special pallet safety shrinking foil,
the piling corner of the trays bring enough stability.

White soft cheese processing.

h. The white soft cheese, germfree produced, would filled in
2 equal constructed sterile tanks
This sterile tank equaipment is standing o a stable
stainless steel frame
The germfree white soft cheese was sucked out of the
2 sterile tanks with big capsule pumps.
The 2 sterile tanks have a content of 1.500 kg and they have
both in the top a stirrer drive with a stirrer in Z” form.
The outlet of the sterile tanks will be done with a outlet
pipe with automatic working vales in DN 120

1 small rectangular balance tank with a man hole in the top,
with a Alfa Laval centrifugal pump for CIP back ways.

i. One foaming machine with 1 mixing head
Foaming will be done with Nitrogen gas.
with necessary valves and dosing systems

1 small high balance tank with a centrifugal pump before.


Price up standing point: 244.000,00 Euro






1998
244,000 €  
  DE   request
111759034
GEA Powerpak 430

Thermoforming machine for fresh meat packaging Print length 700 mm Depth of draw: variable up to 190 mm for soft foil Film: 430 mm + 2 mm, - 0 mm Top film: 420 mm Formats: 1.1 364 x 673 mm 2.1 168 x 673 ...
used machine
 
Thermoforming machine for fresh meat packaging
Print length 700 mm
Depth of draw: variable up to 190 mm for soft foil
Film: 430 mm + 2 mm, - 0 mm
Top film: 420 mm
Formats: 1.1 364 x 673 mm
2.1 168 x 673 mm
3.1 104 x 673 mm
1.2 364 x 323 mm
2.2 169, 5 x 323 mm
4.2 71 x 323 mm factory-refurbished 2007 (at the time little run - very good condition
Control: Siemens S 7 - FM 3
adjustable preference with servo driving motor
Sterile carbon filter unit for purified compressed air to the deformation of base film
Foil heating vacuum with pre-heating by down and forming about 100 vacuum pump
Evacuation of the package about transverse bar of nozzles
Connection for external vacuum pump and built-in high-performance pump 500 m²/h
Vacuum control via pressure sensor
Entire machine through and roller set to heaviest products Pack support
Guillotine sheeters 2 piece
Longitudinal cutting with round knife shaft per Division
Pack off conveyor with conveyor belt 750 mm
Protective hoods with electronic safety lock
Edge trim disposal with trim suction
electronic Temparaturüberwachung of form and seal heating
Total length of the machine 9.785 mm

Optional: water cooling circuit with enhanced pump
Electric rotary table electric transfer belts from the machine to the round table
2007
Price  
  DE   request
110448410  
GEA Powerpak

used machine
 
 
Price  
  DE   request
110448408  
GEA Powerpak

used machine
 
 
Price  
  DE   request
108496973
MULTIVAC R 530 MC
Deep drawing packaging machines

Machine is in Switzterland and all parts shown by hand not come with machine.
used machine
 
Machine is in Switzterland and all parts shown by hand not come with machine.
1993
Price  
  CH   request
108496972
MULTIVAC R 530
Deep drawing packaging machines

Machine is in Switzterland and all parts shown by hand not come with machine.
used machine
 
Machine is in Switzterland and all parts shown by hand not come with machine.
1994
Price  
  CH   request
108496971
MULTIVAC R 530

Machine is in Switzterland and all parts shown by hand not come with machine.
used machine
 
Machine is in Switzterland and all parts shown by hand not come with machine.
1997
Price  
  CH   request
108496970
MULTIVAC R 330
Deep drawing packaging machines

Machine is in Switzterland and all parts shown by hand not come with machine.
used machine
 
Machine is in Switzterland and all parts shown by hand not come with machine.
1999
Price  
  CH   request
108496969
MULTIVAC R 230
Deep drawing packaging machines

Machine is in Switzterland and all parts shown by hand not come with machine.
used machine
 
Machine is in Switzterland and all parts shown by hand not come with machine.
1998
Price  
  CH   request
108496966
MULTIVAC R 530
Deep drawing packaging machines

Machine is in Switzterland and all parts shown by hand not come with machine.
used machine
 
Machine is in Switzterland and all parts shown by hand not come with machine.
2001
Price  
  CH   request
107366767
MULTIVAC R230

Web widt 355 mm Advance cut off 250 mm Semi rigid and flexible packing
used machine
 
Web widt 355 mm
Advance cut off 250 mm
Semi rigid and flexible packing
2001
Price  
  TR   request
106077220
MULTIVAC R530
Vacuum deep drawing machines

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft ...
used machine
 
Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping
2000
Price  
  DE   request
105286658
SEALPAC RE 20
Deep drawing packaging machines

Sealpac thermoforming the thermoforming machine 150 mm flue length Cutting length outdoor: 380 mm Formatmasse: 2 x 190 x 150 mm We can offer also a labeling system with (top label) offer. The machine is in very g ...
used machine
 
Sealpac thermoforming the thermoforming machine 150 mm flue length
Cutting length outdoor: 380 mm
Formatmasse: 2 x 190 x 150 mm


We can offer also a labeling system with (top label) offer.
The machine is in very good condition.

Machine is from feedwater
2006
Price  
  DE   request
100004476
BUSH VACUUM PUMPS r5 ra063d ra100d ra160d ra300d

New vacuumpumps for sale TYPES R5 RA063D R5 RA100D R5 RA160D R5 RA305D Never used
new machine
 
New vacuumpumps for sale
TYPES
R5 RA063D R5 RA100D R5 RA160D R5 RA305D

Never used

new
Price  
  NL   request
98066290
TIROMAT VA 430 L Tiromat

used not working machine Tiromat VA 430 L for spare parts Delivery without guarantee

 
used not working machine Tiromat VA 430 L
for spare parts
Delivery without guarantee
 
1,200 €  
  DE   request
92426361
ADOLF ILLIG UA 200 EDB. OST. G.
Thermoforming Machine

Sheet size: 20001000mm max., 310270mm min., forming area: 1950950mm max., 260220mm min., sheet thickness manual loading: 12mm max., clamping edge: 25mm max., height of tool package: 802mm max., weight of tool: 6000N max. ...
used machine
 
Sheet size: 20001000mm max., 310270mm min., forming area: 1950950mm max., 260220mm min., sheet thickness manual loading: 12mm max., clamping edge: 25mm max., height of tool package: 802mm max., weight of tool: 6000N max.
1979
Price  
  DE   request
86544352
BETA PACK BPT 26/37
THERMOFORMING MACHINE

BETA PACK THERMOFORMING MACHINE PRODUCE: BETA PACK MODEL: BPT 26/37 YEAR: 2006 This machine forms, fills, seals and cuts. This machinery is not used, it was bought new, it is in perfect condition except the filler wh ...
used machine
 
BETA PACK THERMOFORMING MACHINE
PRODUCE: BETA PACK
MODEL: BPT 26/37
YEAR: 2006
This machine forms, fills, seals and cuts. This machinery is not used, it was bought new, it is in perfect condition except the filler which is blocked. This machinery fills viscous products (forms, fills, seals and cuts) casseroles from base film PP+PET, lid film AL+OPP, AL. It has a capacity of 14-16 cycle/min, 1 cycle = 6 casseroles.
2006
Price  
  RO   request
86544099
HASSIA VAII
Cup form, fill and sealing machine

With tool for 6 cups. Cup sizes: round 45 mm, height variable depending on weight requirements. Die size: round 53 mm, with pull tab. Dosage: volumetric, 6-cups, 10 to 20 g, weight adjustable. Product hopper approx.  ...
used machine
 
With tool for 6 cups.
Cup sizes: round 45 mm, height variable depending on weight requirements.
Die size: round 53 mm, with pull tab.
Dosage: volumetric, 6-cups, 10 to 20 g, weight adjustable.
Product hopper approx. 50 litres.
Capacity: 9,000 cups per hour depending on the consistency of the product.
1984
Price  
  DE   request
86539414
HASSIA THL 23-20
Form- fill and seal machine

With cup forming station for 15 cups Cup format: 33 mm x 51 mm, height variable depending on the weight Cutting dimension 41 x 59 mm with pull tab Volumetric dosing unit with 15 measuring points for 10 to 30 grams, w ...
used machine
 
With cup forming station for 15 cups
Cup format: 33 mm x 51 mm, height variable depending on the weight
Cutting dimension 41 x 59 mm with pull tab
Volumetric dosing unit with 15 measuring points for 10 to 30 grams, weight adjustable.
Product hopper approx. 50 litres
Performance: max. 30000 cups/h depending on the product consistency
is suitable for the filling of honey, butter, jam, etc.
With carton packer Hassia.
Used, complete overhauled.
1987
Price  
  DE   request
page 1 >
You didn't find your wanted machine? to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter