test used for sale

Heraeus Vötsch Here we offer you a climate test chamber. Water-cooled Housing dimensions: width 2215 x depth 1280 x height 1985 (mm) Rated voltage: 400V, +-10%, 3/N.50Hz Rated power: 12.5 kW Rated current: 19 A Temperature testing Temperature range -70°C to + 180°C Temperature deviation: +- 0.5 K temporally, +- 2 K spatially Cooling speed on average: 2 K/min Heating speed on average: 3 K/min Climatic test Temperature range +10°C to + 90°C Humidity range: 10% to 98% RH Humidity deviation: +- 1% to +- 2% RH (temporal) Temperature deviation: +- 0.3 K temporally, +- 1.0 K spatially Test room volume: 1200 liters Qualified usable space: 695 x 1190 x 750 mm, approx. 620 liters Refrigerant ND R404A Refrigerant HD R23 Water consumption: < 3 litres / 24 hours (at 40 °C and 92 % RH) Type: HC 7120/S For you as a buyer for security the following information! The fol ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2X lateral implementation 9cm Refrigerant VK R 452 A Weight approx. 300 kg Type: HT 7020 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature deviation over time ± 1 K Temperature deviation spatially ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x lateral implementation 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to  ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Tester Water Cooled Designation VTS 7150-5-S Performance data: With temperature change rate of 5 K/min Test room dimensions Height 950 mm Width 1100 mm Depth 1475 mm External dimensions Height 2000 mm Width 1415 mm Depth 2566 mm Temperature range -70°C to + 180°C Temperature deviation in time ± 0.1 to ± 0.5 Temperature homogeneity spatially ± 0.5 to ± 2.0 Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.0 K/min Heat compensation 5000 W Test volume: 1540 liters 2x lateral ∅ 125 cm 1x lateral ∅ 50 cm Cabinet is water-cooled Electrical connector: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 30 KW Rated current: 55.0 A Refrigerant: R 404A and R 23 Weight: approx. 1300 kg net Type: VTS 7150-5-S  ...

CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water-cooled Type series: CTS T-30/920/S Test room volume: 920 liters Test room dimensions: D x W x H 820 x 850 x 1340 mm Overall dimensions: D x W x H 1870 x 1200 x 2400 mm Temperature working range: Temperature range -30(Tested to -35) to +180°C Heating speed: 2.5 K/min Cooling speed: 2.8 K/min Electrical connection 400 V 3/N, 50 Hz Rated power: approx. 7.3kW Rated current: approx. 12.5 A Refrigerant: R404A Weight: 770 Kg Type: T-30/920/S For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful verification, the chambers are subjected to a test run, which is monitored with cal ...

Weiss climatic test chamber with humidity -72°C to +180°C approx. 335 liters WK3-340/70 Already upgraded to the new R452A refrigerant Here we offer a Weiss climate test chamber. Air-cooled Temperature Testing Volume 335 liters Test Chamber Dimensions: Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Minimum temperature –72°C Maximum temperature +180°C Temperature change speed, cooling 3 K/min Temperature change speed, heating 3 K/min Temperature deviation, timed ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ±1.5 K Climatic test: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time ± 0.1 to ± 0.3 K Temperature homogeneity spatially ± 0.5 to ±1 K Moisture deviation over t ...

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...

GABO EPLEXOR® Bench Test Machine Here we offer you a GABO EPLEXOR® bench test machine. GABO EPLEXOR® 500 N Spectroscope 500 N / 1500 N static Dynamic Mechanical Analysis (DMA) EPLEXOR® Measurement of viscoelastic material properties in Dependence of temperature, frequency and mechanical stress EPLEXOR Series Test Systems® enable the mechanical characterization of a wide range of different materials: from elastomers and polymers, to Composites, metals, glasses, ceramic materials, Biomaterials and food, up to adhesives, plastic Masses and liquids. Areas of application are: DMTS/DMTA/DMA Analysis of viscoelastic material properties dynamic material testing dynamic fatigue testing Dynamic component testing Rheology The Method of Dynamic Mechanical Spectroscopy (DMTS/ DMTA or DMA) uses forced, mechanical vibrations for the deformation of the test specimens. The samp ...

Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

Available in stock 1 x Used Injector Nozzle Test Stand. Use the injector nozzle test stand to verify the shape and atomization of the injected test fluid and to leak test the needle seating. The equipment is used but in good working conditions.

IV Bag in line test system is used for automatic container closure integrity test. The IV bag test measurement method is based on mass extraction technology. At deeper vacuum liquid will boil off the surface and become gas vapor. The intelligent molecular flow sensor will measure the amount of gas extracted from the IV bag while the IV bag is placed inside the sealed vacuum chamber. the leak flow rate is then compared to the maximum allowed leakage which is the flow rate generated from a known defect size at similar test conditions and a pass fail decision is made.

Test pressure gauge with test valve MESSGERÄTEWERK BEIERFELD 1/FM20/2 0 - 1,6 kp/cm² (0 - 1.6 bar) TGL16374 Accuracy class: 0.6 Housing diameter: Ø 160 mm Test valve with test connection M20 x 1.5 TGL16401 im Holzkoffer New ! Dimensions: 330 x 195 x 145 mm

Test pressure gauge with test valve MESSGERÄTEWERK BEIERFELD 1/FM20/2 0 - 2,5 kp/cm² (0 - 2.5 bar) TGL16374 Accuracy class: 0.6 Housing diameter: Ø 160 mm Test valve with test connection M20 x 1.5 TGL16401 im Holzkoffer New Dimensions: 330 x 195 x 145 mm

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...

The quasar 2,5 kN is a product with the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typical obtained from static universal testing machines tensile, pressure and bending - cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configu ...

The FALCON 500 series is a new generation of micro Vickers / macro Vickers / micro Brinell hardness testing machines with integrated load cell and test loads of Vickers / Knoop (depending on type): 1 g 62.5 kg (also in one device) The device improves the conventional hardness testing and is aimed at the reduction of operator influence on the test results. The unique system to the test load application includes an electronically controlled application of force and excellent force sensor technology for absolute accuracy. Continue to the FALCON hardness testing machine offers a superior quality of mechanical and optical components and makes it to the reference instrument of this class. The innovative hardness testing software IMPRESSIONS with "Workflow control" allows the storing of results, creation, storing programs Quality at a fair price - approximately 30% cheaper compared to  ...

Thermotron Environmental Test Chamber Here we offer you a Thermotron environmental test chamber. Thermotron Environmental Test Chamber Water-cooled Working range volume: 227 litres Temperature uniformity: All models 0.7°C Temperature range: -70°C to + 180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: width 610 mm x depth 610 mm x height 610 mm External dimensions width 890 mm x depth 1240 mm x height 1850 mm Humidity Range: All models 10% to 98% RH Humidity Control: All models 2.5% RH Heating capacity in minutes -65º to 71ºC: 17 Heating capacity in minutes -65º to 180ºC: 43 Heating capacity in minutes -40º to 85ºC: 16 Electrical requirements in full load amplifiers 230/3/60: 19 Electrical requirements in full load amplifiers 230/1/60: 25 Electrical requirements in full-load amp ...

Roell Amsler 50 DSM 6100-F Creep Testing Machine 50 kN Roell Amsler 50 DSM 6100-F Endurance Testing Machine Principle: A creep test is the strength test under static stress and constant temperature. The plastic deformation of the sample is measured. In addition to tests on solid test rods, the cracking behavior under compressive stress can also be determined on foams (e.g. core materials for laminated composites). Application: Long-term behavior under load of plastics and metals at constant elevated temperature. Measuring range: Force range: 0.5kN - 50kN Strain transducer measuring range: 10 mm Temperature range: up to 500 degrees Sample Requirement: Round specimen: 14.7 x 180 mm Flat sample or cuboid: max. 50 x 50 x50 mm More items - new and used - can be found in our shop! International shipping costs on request!

Test pump, pressure device, measuring device, pressure pump, pressure test pump -Manufacturer: Ridgid, mobile pressure test pump -Type: 1425 pump -Max.Press: 50bar/725psi -Dimensions: 720/170/H300 mm -Weight: 10 kg

Test pump, pressure device, measuring device, pressure pump, pressure test pump -Test pump: mobile pressure device -Pressure gauge: 16 bar -Container: volume 95 liters -Dimensions: 1270/490/H1060 mm -Weight: 89 kg

Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg

Vötsch VT 7012 S2 Thermal shock test chamber Thermal shock test chamber Two-chamber design The temperature control of the hot chamber ranges from +50 °C to +220 °C (optionally up to +250 °C), that of the cold chamber from -80 °C to +70 °C. Test chamber volume 125 l Temperature range hot chamber +50 °C to +220 °C Temperature range cold chamber -80 °C to +70 ° Regulation and control: Controller board with detachable color panel Type: VT 7012 S2 More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VT 7012 S2 Simcon-Net Farbtouch Schocktestkammer Vötsch VT 7012 S2 Simcon-Net color touch Shock test chamber Shock test test chamber More items - new and used - can be found in our shop! International shipping costs on request!

Weiss WK-1000/70 Climatic test chamber -70 to +180 °C White WK-1000/70 Climatic test chamber 990 litres Climatic chamber -70 to +180 °C with humidity 10 to 98 % Test chamber dimensions: Height 950 mm Width 1100 mm Depth 950 mm More items - new and used - can be found in our shop! International shipping costs on request!

Weiss Temperature Test Chamber KWP 64/75 Cooling-heating mode : -70°C ... +130°C Cooling: 2.5 approx. k/min Heating: 3.0 approx. K/min Temperature stability: +-0.5...+-1.0K Insertion dimensions: height 1360 mm, width 880 mm, depth 1000, mm External dimensions: height 1215 mm, width 800 mm, depth 960 mm Test chamber dimensions height 400mm, width 500mm, depth 325mm The connection voltage is: 230V/1Ph+N+PE/ 50 Hz (+6%/-10%) Gplvqvbz Connected load: 1.4 kVA Plug: Schuko 16A Weight : 180 kg Type: KWP 64/75 The Weiss temperature chamber has been monitored with calibrated and calibrated test equipment!

Attention: Don't buy a used universal tester / tractor-proof ingenuators: they need (all?) new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – a dead end that costs a lot of money later! A used machine, pick-up, test software update (?), commissioning, modernization is more expensive than a new machine from GALDABINI Quasar 200 kN latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 for tests on plastics, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Quality Components + Assemblies ergonomic design, ...

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

RS Simulators Here we offer a temperature test chamber. Water cooling Temperature range: -45°C to +180°C External dimensions: width 1300 mm x height 2100 mm x depth 2250 mm Test area dimensions: width 840 mm x height 840 mm x depth 840 mm Aggregate part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating speed: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.

The RF303 Electrosurgical Analyzer tests electrosurgical units (ESU) for generator output and high frequency (HF) leakage. It is compatible with both isolated and earth/ground-referenced types of electrosurgical units. You can test both the high-level monopolar and the low-level bipolar ESU outputs using this versatile Analyzer. RF303 Electrosurgical Analyzer Tests Electrosurgical Devices (ESR) Generator power and radio frequency (RF) leakage. It is compatible with both insulated and earth/ground types of electrosurgical equipment. You can test both the high-level monopolar and the bipolar Low-level ESU outputs using this versatile analyzer. Device can be shipped worldwide. The tester can be shipped worldwide.

RS Simulators Here we offer a test cabinet. Water-cooled Temperature range: -40°C to +180°C Test room dimensions: 850mm x 850mm x 800 mm (WxHxD) External dimensions: 1100mm x 1850mm x 1500mm (WxHxD) Current consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 800 kg Type: TS 600/45 Explosion-proof operation not tested but Max 160°C in this Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

RS Simulators Here we offer a temperature test chamber. Air-cooled Temperature range: -50°C to +100°C Test room dimensions: 530 mm x 630 mm x 530 mm (WxHxD) External dimensions: 820 mm x 1750 mm x 1300 mm (WxHxD) Current consumption: 13.5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Tuschier- and test injection press make REIS type TUS 60 A 10 HMachine -No: 177/66, built in 1966Table surface: 590 x 600 mmMax. Shaped area: 600 x 1200 mmMax. Mold height: 680 mmMax. Mold weight: 2.5 tStroke of the table: 500 mmEjector stroke: 200 mmEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 0 - 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Stroke speed stepless: 0 - 80 mm / sLoad capacity of the upper swivel plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Test sprayer- Heater- ejector- swivel top plate m. hydr. locklittle usedPrice on request.Delivery: ex warehouse or location free loading tru ...

Spotting- and test injection press make REIS type TUS 60 AMachine -No: 791, built in 1974Max. Mold area: 600 x 1000 mmMax. Mold height: 727 mmMax. Mold weight: 2500 kgEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Load capacity of the upper swing-out plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmColumn diameter: 80 mmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H approx.: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Control panel- Test sprayer- Heater- ejectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We ...

Spotting and test spray press make REIS type TUS 60 / 0K 20Machine -No: 19137/79 Year 1979Technical specifications:Press force: 20 tRetraction force: 10 tgr. stroke: 775 mmEjector force: 3.0 tEjector travel: 200 mmOperating pressure: 175 barTable mounting surface: 570 x 670 mmDistance between columns: 620/470 mmInstallation height: 740 mmPiston diameter: 120 mmDrive power: 7.5 kWtotal installed power: 9.5 kWDimensions L x W x H: 1900 x 1200 x 3100 mmWeight approx: 2300 kgWith- Test spray device- 2 hydr. sockets- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Test chamber volume: 900 l, Temperature range: -40°C - +100°C, humidity range: 10 - 98, Test chamber weight: 750kg, refrigeration system weight: 480kg. Refrigerant, refrigerant quantity and operating pressure: R134a/0.8kg/18bar, R507/4.0kg/27bar, R23/1.0kg/27bar

Test device for extension cables -Socket tester -Test device for: extension cables, table sockets -Weight: 30 kg

Test holder, test holder, workpiece holder PAGUS W-442 908 dial gauge holder: Ø 8 mm jaw width: 160 mm jaw height: 55 / 63 mm wingspan: 25 ... 55 mm Plug width: 20 / 27mm Plug depth: 22 mm used, tested ! Dimensions: 150 x 130 x 95 mm

Test mandrel, control mandrel PAGUS 188354 187314 mandrel: Ø 50 x 310 mm Cantilever length ( A-dimension ): 370 mm Flange diameter ( inner ): Ø 103 / 106 x 14 mm ( conical ) Flange diameter ( outer ): Ø 175 x 50 mm bolt circle diameter: Ø 150 mm hole diameter: Ø 10.5 mm with wooden box used, tested ! Dimensions ( wooden box ): 425 x 225 x 205 mm Dimensions ( test mandrel ): 370 x 175 x 175 mm

Test arm, control arm PAGUS 189097 arm length ( without dial gauge holder, from flange center ): 257,257,5 mm arm cross-section: 20 x 20 mm dial indicator: Ø 8 mm Flange diameter ( inside ): Ø 79 / 82 x 14 mm ( conical ) Flange diameter ( outside ): Ø 130 x 77 mm bolt circle diameter: Ø 112.5 mm hole diameter: Ø 8.5 mm with wooden box used, tested ! Dimensions ( wooden box ): 420 x 185 x 135 mm Dimensions ( test arm ): 345 x 175 x 77 mm

Description: The almost new 8 MW transmission test station is operated from a central control station. Some of the test energy input can be fed back into the power network. Inventory number: 9000945 , Year of construction: 2018 Data on the three-phase asynchronous machines Nominal output: 7.7MW Maximum output: 8.47MW Nominal speed: 1150/min Maximum speed: 2200/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm Main shaft data Nominal speed: 8.99 rpm Nominal torque: 6000kNm Maximum torque: 8800kNm Cooling system Cooling capacity of the cooling tower: 900kW Coolant volume flow: 160m³/h at 4 bar and 30°C Nominal pressure hydraulics Hydraulic system main shaft: 250 bar at 100 l/min Hydraulic system quick coupling: 300 bar at 1 l/min Hydraulic system generator (lifting/lowering) 150 bar at 8 l/min Oil system: 8 bar at 120 l/min General data Operati ...

Welding table, straightening table, straightening flap, work table, clamping table test plate, spotting plate, test ruler, spotting ruler PAGUS Working surface: 1500 x 100 mm height: 225 mm used, tested ! Dimensions: 1500 x 100 x 225 mm

welding table, straightening table, straightening pad, work table, clamping table test plate, spotting plate, test ruler, spotting ruler WMW working surface: 500 x 100 mm TGL 7680 height: 120 mm used, tested ! Dimensions: 510 x 100 x 120 mm

Vötsch VC 7150-3/S climatic test chamber -70°C to +180°C Vötsch VC 7150-3/S Climatic test chamber Temperature -70°C to +180°C with humidity 10 to 98 % More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VCS 7090-5/S climatic test chamber -70 to 180°C Vötsch VCS 7090-5/S Climatic test chamber with humidity 10 to 98% -70 to 180°C More items - new and used - can be found in our shop! International shipping costs on request!

Heraeus Vötsch VT 7100 Temperature test chamber -70°C to +180°C Heraeus Vötsch Temperature test chamber VT 7100 -70°C to +180°C 1035 Litre(s) More items - new and used - can be found in our shop! International shipping costs on request!

CTS Temperature Test Chamber CTS T-40/200 EX/I CTS Temperature test chamber CTS T-40/200 EX/I 200L 142137 -40 to + 180°C Heating 4 K/min Cooling 4 K/min More items - new and used - can be found in our shop! International shipping costs on request!

Test pump, with tank and transport trolley REMS E-Push 2 Test and pressure range: max. 60 bar ( 6 MPa, 870 psi ) flow rate: 6.5 l/min medium: water, aqueous solutions, emulsions ( pH of liquids 7 – 10 ) temperature of liquids: max. 60°C viscosity of liquids: max. 1.5 mPa s motor: 1.3 kW 220 V 1AC 50 Hz tank: approx. 25 l drip tray: approx. 32 l used, tested ! Dimensions: 1300 x 520 x 930 mm

Paul Köster leak testing system for die-cast aluminium or cast aluminium housings in good condition. 2 city ions with workpiece carrier system for different tool holders. Connection option for compressed air and hydraulics directly on the workpiece carrier. Test container approx. 1600 x 2200 mm, depth approx. 900 mm. The system was used to test die-cast aluminium gear housings. Immediately available from stock.