british flag
Resale Logo

test used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Karner & Dechow Industrie-Auktionen Ges.m.b.H.   http://www.karner-dechow.at 
banner logo
start page > keywords test > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125852305 841  

JAGENBERG Jagfeed for sale
Folding carton gluer equipment


Before depositors for folding carton gluing machines, size range: 100 900 mm, standard, "Stand Alone" version, non-contact level proximity switch. Overhaul 2018: cleaned, tested, painted, new belts and straps.
used machine
 
Before depositors for folding carton gluing machines, size range: 100 900 mm, standard, "Stand Alone" version, non-contact level proximity switch. Overhaul 2018: cleaned, tested, painted, new belts and straps.
1993
Price  
    request
125848476 1009

BOMAG BC 601 RB for sale
Crawler excavators


27t, 3800 mm blade, machine is in workind condition and can be tested on site; Engine: Deutz BF6L513RC; Rear tyres remaining: 60; Front tyres remaining: 60
used machine
 
27t, 3800 mm blade, machine is in workind condition and can be tested on site; Engine: Deutz BF6L513RC; Rear tyres remaining: 60; Front tyres remaining: 60
1991
Price  
  AT   request
125837660 1101

ORGANIC RANKINE CYCLE 750 KW Power Plant for sale
Generators


750 KW Pure Cycle ORC, Organic Rankine Cycle System, Zero Fuel Input Costs Complete plant, zero fuel input costs, hot fluid, Low temp resource 91 to 149, Three Pure Cycle 280 ORC Turbine Generators Module Design, can be ...

 
750 KW Pure Cycle ORC, Organic Rankine Cycle System, Zero Fuel Input Costs
Complete plant, zero fuel input costs, hot fluid, Low temp resource 91 to 149, Three Pure Cycle 280 ORC Turbine Generators Module Design, can be increased in size, 50 HZ, Only 200 hours of operation. Hot water flow of 220 mth at 101 geothermal brine. The plant was tested on low temperature geothermal resource but can also be used for any kind of waste heat source around 100 degrees temperature. This Special Plant is being sold below the cost of new. Great Opportunity with quick investment return.
 
Price  
  NA   request
125847656 107

HÄMMERLE TRM 30/750 for sale
Roller leveller


material width: 0750 mmmaterial thickness: 7,00 mmno. of straightening rolls: 19 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 30 mmsheet length min.: 60 mmspeed ca.: 2 - 20 m/min.total power requirement: kWwei ...
used machine
 
material width: 0750 mm
material thickness: 7,00 mm
no. of straightening rolls: 19
sheet thickness - min.: 0,50 mm
diam. of the rolls ca.: 30 mm
sheet length min.: 60 mm
speed ca.: 2 - 20 m/min.
total power requirement: kW
weight of the machine ca.: 10 t
dimensions of the machine ca.: m
hydraulic leveller

The leveller is completly checked and revised.
We invite you to make a test with your material on the leveller.

Dimensions:
leveller - 2,30 x 1,80 x 1,80 m
hydraulic - 1,60 x 0,90 x 1,80 m
control - 0,60 x 0,40 x 1,90 m



This ad was created with MODUL MWS - the software solution of LogoTech.
1994
Price  
    request
125837601 1300

MAHR MarForm MFK 500 for sale
Form Tester


X-travel: 120mm, TX-travel: 800mm, TY-travel: 400mm, table surface dimensions: 800x400mm, table load: 4t, length: 3200mm, width: 2350mm, height: 1620mm, machine weight with base: 12.6t.
used machine
 
X-travel: 120mm, TX-travel: 800mm, TY-travel: 400mm, table surface dimensions: 800x400mm, table load: 4t, length: 3200mm, width: 2350mm, height: 1620mm, machine weight with base: 12.6t.
2007
Price  
  DE   request
125832721 101

DECKEL MAHO DMU 80 monoBLOCK for sale
Machining Center - Universal


x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 15 / 10 kWmax. Torque: 130 Nmtool taper: C ...
used machine
 
x-travel: 880 mm
y-travel: 630 mm
z-travel: 630 mm
control: iTNC 530 Heidenhain
Main spindle::
turning speed range - main spindle: max. 12.000 min/-1
power capacity - main spindel: 15 / 10 kW
max. Torque: 130 Nm
tool taper: CAT 40 / SK 40
swivellable: B: +30° / -120 °
NC-Rotary table::
table surface area: Ø 700 / 1.250 x 700 mm
max. table load: 800 kg
rotatable: C: 360 °
max. workpiecediameter: 850 mm
max. workpiece height: 550 mm
tool magazin::
number of toolpositions: 32 pos.
tool taper: CAT 40 / SK 40
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 160 mm
max. tool weight: 8,0 kg
change-time chip to chip: ca. 4,9 sec
feeds::
feed speeds: max. 30.000 mm/min
rapid traverse: 30 m/min
Accelaration: 5 m/s²
total power requirement: 48 kVA
weight of the machine ca.: 14,0 t
dimensions of the machine ca.: 4,5 x 4,0 x 2,5 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 20/40 bar
through spindle coolant:
paper band filter:
elektr. hand wheel:
Rotary screen:
test probe: Heidenhain TS 649
tool setting: Laser
oil mist extraction:
3D quickSET: Tool Kit
Signal lamp - 4 colour:
5 Axis CNC - MachiningCenter Universal
DECKEL MAHO - DMU 80 monoBLOCK

- NC-Rotary Table (C-Achse) integrated in rigid-table
- Swivel-Milling-Head (B-Achse)





This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
125837554 112

TEAMTECHNIK 3x3m for sale
Gear Testing Machines


Full-Automatic functional Transmission-Test-Bensch for manual GearBoxes with CNC , YoM 2014; All sales are made subject to the seller's consent. Deadline: approx. 3-4 days
used machine
 
Full-Automatic functional Transmission-Test-Bensch for manual GearBoxes with CNC , YoM 2014; All sales are made subject to the seller's consent. Deadline: approx. 3-4 days
2014
25,300 €  
  AT   request
125832723 101

DECKEL MAHO DMU 100 monoBLOCK for sale
Machining Center - Universal


x-travel: 1.150 mmy-travel: 710 mmz-travel: 710 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 10.000 min/-1power capacity - main spindel: 30 / 20 kWmax. Torque: 285 Nmtool taper: ...
used machine
 
x-travel: 1.150 mm
y-travel: 710 mm
z-travel: 710 mm
control: iTNC 530 Heidenhain
Main spindle::
turning speed range - main spindle: max. 10.000 min/-1
power capacity - main spindel: 30 / 20 kW
max. Torque: 285 Nm
tool taper: HSK A63
swivellable: B: +30° / -120 °
NC-Rotary table::
table surface area: Ø 800 / 1.500 x 800 mm
max. table load: 800 kg
rotatable: C: 360 x 0,001 °
max. workpiecediameter: ca. 950 mm
max. workpiece height: ca. 650 mm
T-slots: 11x 14 x 63 mm
tool magazin::
number of toolpositions: 60 pos.
tool taper: HSK A63
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 160 mm
max. tool weight: 10,0 kg
change-time chip to chip: ca. 4,9 sec
feeds::
feed speeds: max. 30.000 mm/min
rapid traverse: 30 m/min
total power requirement: 58 kVA
weight of the machine ca.: 18,0 t
dimensions of the machine ca.: 8,5 x 6,0 x 3,2 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 20/40 bar
through spindle coolant:
paper band filter:
Rotary screen:
test probe: Heidenhain TS 649
elektr. hand wheel:
tool setting: Laser
Signal-Light:
oil mist extraction:
3D quickSET: Tool Kit
5 Axis CNC - MachiningCenter Universal
DECKEL MAHO - DMU 100 monoBLOCK

- NC-Rotary Table (C-Achse) integrated in rigid-table
- Swivel-Milling-Head (B-Achse)





This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
125837526 802  

HEIDELBERG MOZP E for sale


Heidelberg MOZP S Plus version Conventional 80 million Can be tested in the camp

 
Heidelberg MOZP S
Plus version
Conventional
80 million
Can be tested in the camp
 
Price  
    request
125832623 832

HEIDELBERG Stahlfolder KD 78/4 KTL-RD-T for sale
Folding machine


Heidelberg Stahlfolder KD 78/4 KTL-RD-T Year 1999 - Serial-No. 125203/99-274037 Round pile feeder 1. Folding unit 4 buckles 2. Folding unit knive - buckles - knive Delivery SBP 46 Counter Digital Instruction - S ...
used machine
 
Heidelberg Stahlfolder KD 78/4 KTL-RD-T

Year 1999 - Serial-No. 125203/99-274037
Round pile feeder
1. Folding unit 4 buckles
2. Folding unit knive - buckles - knive
Delivery SBP 46
Counter Digital
Instruction - Sparepart - Electric manuals
anti noise hoods
include compressor/pump

-Available Immediately -
-can be inspect-
-on stock - can be test-
1999
Price  
    request
125837401 2500

VOLKSWAGEN PKW (M1G) VW Touareg TDI for sale
CAR


last off Code: BH-64849 Matriculation year: 17.12.2007 National code: 155647 elapsed. Mileage: Power: 128 kW Displacement: 2.461 cc Test badge: no § 57a inspection plate available. Authorities need to be ...

 
last off Code: BH-64849
Matriculation year: 17.12.2007
National code: 155647
elapsed. Mileage: Power: 128 kW
Displacement: 2.461 cc
Test badge: no § 57a inspection plate available. Authorities need to be taken over by the buyer.
Drive type: Diesel
Maximum speed: 188 km/h
Motornr.: BPE
Type, variant, version: 7L/ACBPEX11/AM6AM68D017161BAN7GG
FIN: WVGZZZ7LZ8D041312
Equity / total weight: 2,247/2,850 kg
Color: Green metallice
Body: hatchback
Number of seats: 5
Features: 4 doors, 1 rear door, seats fabric covered dark grey, 6 speed, air conditioning, radio, CD player, tires: 235/70 R16 steel rims, 5-hole
Documentation: types of licence available
Key: 2
Comments to the State: seatbelt covers front small rockfall damage, div to repair leaks in the bottom of the engine, intercooler, transmission, differential, explicitly pointed out is that no full Conducted inventory and check the functionality of the auction object. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number:
 
Price  
    request
125828736 109

AGIECHARMILLES +GF+ DRILL 11 for sale
E2460


Machine cleaned and tested X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max ...
used machine
 
Machine cleaned and tested

X-Axis Travel (mm):
X-Axis Travel (mm):
X-Axis Travel (mm):
Worktank length:
Worktank width:
Worktank height:
Max. workpiece length:
Max. workpiece width:
Max. workpiece height:
Max. workpiece weight:
Taper angle/height:
Automatic Wire Feeding:
Length x width x height:
Weight (kg):
Worked power hours:

The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.
2009
Price  
  FR   request
125837399 2417

FORD Transit PRIT.DO 350M/115 for sale


last off Code: BH-66208 Matriculation year: 29.10.2004 elapsed. Mileage: not readable Power: 85 kW Displacement: 2.402 cc Test badge: no § 57a inspection plate available. Authorities need to be taken ove ...

 
last off Code: BH-66208
Matriculation year: 29.10.2004
elapsed. Mileage: not readable
Power: 85 kW
Displacement: 2.402 cc
Test badge: no § 57a inspection plate available. Authorities need to be taken over by the buyer.
Drive type: Diesel
Maximum speed: 135 km/h
Motornr.: FXFA
Type, variant, version: FNBY/FXFAL/P6DDA
FIN: WFOCXXTTFC4Y53336
Equity / total weight: 2.057/3,500 kg
Color: Green
Design: open, flatbed with tarpaulin and canvas
Number of seats: 6
Dimensions: approx. 2,550 x 2,200 mm
Facilities: 4 doors, fabric gray with patterns, radio, air conditioning, 5 course dinner, div. MotorTEIle: hose, compressor in the vehicle front in stock
Tyres: 175/75 R16C, twin-wheels
Documentation: types of licence available
Key: 2
Comments to the State: battery probably defective or deep empty div. rockfall damage on front page, color paint differences through fixes, rust spots on wheel arches and thresholds, turbocharger damage â share in the vehicle front right, expressly for the pointed out that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number:
 
Price  
    request
125822816 402

TS INTERNATIONAL-ITALY Entrance for sale
Line packing and inserting Entrance Syspac


The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found  ...
used machine
 
The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found the completeness of the device.
2009
66,600 EU?  
  PL   request
125837397 2486

MERCEDES-BENZ Sprinter 313 CDI for sale


last off Code: BH-66500 matriculation year: 17.02.2003 elapsed. Mileage: not readable : KW 95 Displacement: 2.148 cc Test badge: no § 57a inspection plate available. Authorities need to be taken over by t ...

 
last off Code: BH-66500 matriculation year: 17.02.2003
elapsed. Mileage: not readable
: KW 95
Displacement: 2.148 cc
Test badge: no § 57a inspection plate available. Authorities need to be taken over by the buyer.
Drive type: Diesel
Maximum speed: 150 km/h
Motornr.: OM611. 981
Type, variant, version: SPRINTER313CDI
FIN: WDB9036621R477895
Equity / total weight: 2.155/3,500 kg
Color: Blue
Construction: closed box/case
Number of seats: 3 features: fits fabric light grey pattern, 2 doors with hinges, 1 sliding door, 4 x 4 drive, radio, air conditioning
Tyres: 225/70 R15C steel rims 5 hole
Documentation: types of licence available
Key: 2 comments to the State: battery probably defective or deep emptied, differences in colour paint repairs, small stone chip damage to front page, div. Rust damage all around and wheel arches, brake system repair outdated, moisture at the bottom - front passenger seat,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number:
 
Price  
    request
125804367 201

HOLZMA HPP 11/43 for sale
Panel Saw with Lift Table


Weight approx.: 11800 kgcutting length: 4300 mmDimensions (l x w x h) approx.: 20000 x 2400 x 2200 mmmain motor: 13,5 kWscoring saw: 2,2 kWcutting depth: 4300 mmsoftware: CADmatic 4.1 saw blade protection: 125 mmmax ...
used machine
 
Weight approx.: 11800 kg
cutting length: 4300 mm
Dimensions (l x w x h) approx.: 20000 x 2400 x 2200 mm
main motor: 13,5 kW
scoring saw: 2,2 kW
cutting depth: 4300 mm
software: CADmatic 4.1
saw blade protection: 125 mm
max. opening of clamps: 130 mm
clamps piece: 7 (75/275/475/1050/1850/2650/3450mm) piece
main saw blade: 450 mm
scoring saw blade: 180 mm
air table: 2 x 2160mm x 650mm 2 x 2810mm x 650mm
lift table: 4.300 x 2.200 mm
saw carriage speed forward: 5 - 100 m/min
saw carriage speed reverse: 100 m/min
program fence speed forward: 80 m/min
program fence speed reverse: 80 m/min
Description: HOLZMA HPP 11 Panel Saw with Lift Table ECONO-LIFT TYPE HEE 43/22 <,/ b>, <,/ h3>,

Specifications <,/ h3>,
»Main saw motor 13,5 kW
»Scoring saw motor 2.2 kW
»Collet opening max. 130 mm »Saw blade diameter 450 mm
»Saw blade overhang 125 mm
»Saw carriage advance 5 - 100 m / min
»Return constant 100 m / min »Program slider speed
»Flow / return, max. 80 m / min »Compressed air 6 bar
»Operating voltage 400 V / 50 Hz
»CE approved
»GS checked
»FPH dust tested
»Minimum suction speed at
»Extraction pipe approx. 28 m / sec »Suction connection swarf channel 1 piece 200 mm
»Suction connection pressure bar 1 piece 160 mm


Lifting table ECONO-LIFT TYPE HEE 43/22 <,/ h3>,

»Year: 2013
»4300 x 2200 mm Max »Load capacity 7 to
»Roll spacing 396 mm (measured from center of roll to Roll center)
»Roll diameter 108 mm


Roller conveyor not driven <,/ h3>,
»Plate thickness min. 6 mm »Max. Pile height (ground level)
»Series 350/380 590 mm
»Max. Pile height (pit) 840 mm
»Impact feet 2 pieces
»Air cushion table (2160 x 650 mm) 2 pieces
»Air cushion table (2810 x 650 mm) 2 pieces per piece »Ope

2000
Price  
  DE   request
125837395 2500

AUDI PKW (M1) Audi A6 for sale
CAR


last off Code: BH-60002 First registration: 19.04.1999 elapsed. Mileage: 312.759 km : KW 891 Displacement: 1.896 cc Test badge: 04/2017 Drive type: Diesel Top speed: 194 km/h Type, variant, version: 4B/LAFNF1/FM5 ...

 
last off Code: BH-60002
First registration: 19.04.1999
elapsed. Mileage: 312.759 km
: KW 891
Displacement: 1.896 cc
Test badge: 04/2017
Drive type: Diesel
Top speed: 194 km/h
Type, variant, version: 4B/LAFNF1/FM52DAR920
FIN: WAUZZZ4BZXN102830
Equity / total weight: 1,453 / 1995 kg
Color: dark blue
Body: Sedan
Number of seats: 5
Facilities: 4 PCs. doors, seats fabric grey, 5 speed, radio with CD player, air conditioning
Tyres: 195/65 R15 on steel rims
Documentation: types of licence available
Key: 3
Comments to the State: div. rockfalls on hood, partially repaired, driver door is missing the outer handle, small scratches on body right rear, various minor rust damage to body all around, oil spill at the bottom of the motor, expressly for the pointed out that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number:
 
Price  
    request
125789920 104

SAACKE UW I A for sale
Tool Grinder - Universal


max. grinding diameter: 250 mmgrinding length: 230 mmworkpiece length: 450 mmcentre height: 125 mmgrinding table stroke: 355 mmtable - swivable: + / - 90 Gradengine output: 0,75 re/li kWweight of the machine ca.: 0,5 tMe ...
used machine
 
max. grinding diameter: 250 mm
grinding length: 230 mm
workpiece length: 450 mm
centre height: 125 mm
grinding table stroke: 355 mm
table - swivable: + / - 90 Grad
engine output: 0,75 re/li kW
weight of the machine ca.: 0,5 t
Mechanic: good:
Optical condition: good:
The machine can be viewed under current.:
operating key and instruction:
653/78
380 V, with CEE plug u. Electric wire
Color beige

Equipment:
Universal dividing head Mk 5 with dividing disc 24 R
1 dividing disk 15 R + 18 R each
Tailstock firm
Tailstock springy
4 grain tips
12 collets
2 forceps sleeves
2 suit pipes
Support finger device
2 grinding wheel recordings
2 protective hoods with holder
Cold light lamp

Operating instructions and keys

Machine is function tested and comes with an electrical test record
delivered!




This ad was created with MODUL MWS - the software solution of LogoTech.
1979
Price  
    request
125837391 2484

MERCEDES-BENZ Sprinter 313 CDI/4x4 Pritschen for sale


last off Code: BH-66560 Matriculation year: 09.05.2003 elapsed. Mileage: not readable : KW 95 Displacement: 2.148 cc Test badge: no § 57a inspection plate available. Authorities need to be taken over by  ...

 
last off Code: BH-66560
Matriculation year: 09.05.2003
elapsed. Mileage: not readable
: KW 95
Displacement: 2.148 cc
Test badge: no § 57a inspection plate available. Authorities need to be taken over by the buyer.
Drive type: Diesel
Maximum speed: 140 km/h
Motornr.: 611981
Type, variant, version: SPRINTERS C-91/CN3A / 22C6II26
FIN: WDB9036221R492261
Equity / total weight: 2.255/3,500 kg
Color: gray green
Construction: Flatbed with tarpaulin tarpaulin
Number of seats: 5
Dimensions: approx. 2,700 x 2,000 mm
Facilities: Fabric seats dark grey, 5 speed, air conditioning, 3 doors
Tyres: 225/70 R15C steel rims 5 hole
Documentation: types of licence available
Key: 2
Comments to the State: battery probably defective or low drained, various small rust flaws all around, repairs on wheel arches left, right and front, small paint repairs to full body,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number:
 
Price  
    request
125789922 104

SAACKE UW II for sale
Tool Grinder - Universal


max. grinding diameter: 250 mmgrinding length: 380 mmworkpiece length: mmlongitudinal travel: 680 mmtable-size: 980 x 145 mmcentre height: 125 mmpower capacity - grinding motor: 0,75 kWturning speed range - power take  ...
used machine
 
max. grinding diameter: 250 mm
grinding length: 380 mm
workpiece length: mm
longitudinal travel: 680 mm
table-size: 980 x 145 mm
centre height: 125 mm
power capacity - grinding motor: 0,75 kW
turning speed range - power take off spindle: 3300/5000 li/re U/min
max. dia. of grinding wheel: mm
weight of the machine ca.: 0,7 t
Optical condition: very good:
Mechanic: very good:
The machine can be viewed under current.:
operting key:
operating instruction:
20011 - 87 HS
380 V, 50 Hz, with CEE plug u. Cable, color: gray

Equipment:
Height adjustment electric
Dividing head Mk5 with radial adjustment and dividing disc 24 R
each 1 dividing disc 18/21/22 R
Universal clamping head Mk 5
Radius grinder without gauge
eccentric grinding head
Dressinghorse
Dental support
10 collets 4 - 25 mm
2 suit pipes
Pliers sleeve
5 grinding arbors
5 cone reducing sleeves
4 grain tips
Cone wiper
7 grinding wheel chuck
2 protective covers
Tailstock rigid
Tailstock springy
Eccentric plate
Reducing sleeve Mk 5 x Sk 40
various small parts
Tool cabinet
Operating instructions and keys
Machine is workshop tested and with electrical test report! Top condition !



This ad was created with MODUL MWS - the software solution of LogoTech.
1987
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(3)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Form Tester MAHR MarForm MFK 500


X-travel: 120mm, TX-travel: 800mm, TY-travel: 400mm, table surface dimensions: 800x400mm, table load: 4t, length: 3200mm, width: 2350mm, height: 1620mm, machine weight with base: 12.6t.

Hammer mills WEEE shredder Electric 37 Kw


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Hammer mills Jeffrey (refurbished) Model 50x30 USA


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Wheeled excavators Fuchs MHL 340


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Shredders MOCO 4-rotor shredder AZ 17 (shear shredder)


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Double shaft shredders MOCO Shredder AZ 15 (good condition)


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Shredders Shredding truck Volvo Hydraulic shear shredder


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Hammer mills Pallmann stainless steel Model 4-5


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Magnetic separators Steinert Electro drum (trommel) magnet


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Shinohara 52-4


-Four colours Straight machine max size 37x52 cms. -Year 2008, Only 11 mil. impressions -Semi automatic plate change SPC -Shinohara Alcool continuous dampening with Baldwin cooling unit -Console with CIP 3 software installed, all automatic ink and plate registers PCC -Automatic blankets and rollers washers ABW -In production, any print test possible

Shredders Screw shredder Refurbished


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Shredders Hammel 850 type EUREC EUREC Z85


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Granulators Pallmann 200 Kw (12-12)


Online auction closes 28 of june 2018 (28/06/2018). abcs://abc.troostwijkauctions.com/uk/recycling-machines/01-25192/ Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Hammer mills Scrap shredder Diesel 500Hp


Online auction closes 28 of june 2018 (28/06/2018). abcs://abc.troostwijkauctions.com/uk/recycling-machines/01-25192/ Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Cable granulating systems GUIDETTI Sincro 750 (big system)


Online auction closes 28 of june 2018 (28/06/2018). abcs://abc.troostwijkauctions.com/uk/recycling-machines/01-25192/ Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Sheet Metal Shears ZAMECH NG 13


Guillotine ZAMECH NG 13. Technical data: -the greatest thickness of cut metal plate: 13 mm -the maximum length of cut metal plate: 3080 mm -length: 3250 mm -set up the side walls: 3200 mm -power requirements: 21.5 kW -the number of knife strokes per minute: 12 -flywheel diameter: 1100 mm -number of turns of the handwheel on the minute: 500 -outreach: 600 mm -outreach racks: 600 mm -overall dimensions of the machine (w x l x h): 3300 x 4300 x 3050 mm -the weight of the margin squeeze: 15500 kg -DTR-technical-functional

HEIDELBERG GTO52-1


D116 HEIDELBERG GTO52 (year 1992) Format 360 x 520mm / Alcolor dampening with Technotrans / Version plus without N+P / Quick Action Plate Clamps / App. 7 mio. Impressions. Very good working condition, totally free of damages. Available: Immediately (Test is possible) Location: Belgium

HEIDELBERG SM102-2


D291 HEIDELBERG SM102-2 (Year 2000) CP2000 / Alcolor dampening Technotrans / Conventional Plate Clamps / Automatic wash-up equipment / Automatic size setting from feeder / Steel plate in feeder and delivery / App. 68 mio impressions. Available: Immediately (test in production is possible) Location: Belgium Our price proposal: 145000 EUR. (FCA) Machine in very good working condition, always maintained by Heidelberg BNL (Full Service Contract). Machine is totally free of damages.

Blister machines Uhlmann UPS5ET


Uhlmann UPS5ET blister machine for alu/alu blisters, including Uhlmann 149 buffer system. Maximum blister size 272 x 284mm (draw x width), maximum depth 40mm. SyPro feeding system for syringes etc with flexible robotic arm and vacuum grip head. Seidenader camera product presence checking system, VISIOtec VisoScan blister integrity tester, gas flushing with Dansensor MAP Check Combi for measuring the gas content within the pack. Domino D550+ laser printer with Seidenader print control camera. Output up to 400 blisters per minute. As new, with only 350 production hours.

Caspary GmbH Pub Brewery 10 hl


Pub Brewery Caspary 10 HL, Copper Cladded, 2017 Never Installed This pub brewery equipment was made by German Caspary GmbH in year 2017 and it has never been installed and thus new like condition. Factory made brew house block consist of Mash & Wort Kettle, Mash & Lauter Tun and Whirlpool. Whirlpool is located just under Mash & Lautertun. This block has been tested at Caspay factory with all accessories and instruments before shipping. The wort kettle, lauter tun and related pipes and ducts are cladded with highly polished copper which gives this pub brewery a very special high quality atmosphere. Also two-wing trapdoors of both vessels are hand made from copper and polished. This is a complete pub brewery with malt mill, yeast tanks, fermentation tanks, storage tanks, CIP with three tanks, refrigeration system, steam and pressurized air supply equipment. The brewery has semi-automatic control where all valves are controlled pneumatically, while the mashing and boiling process runs automatically. All the steps in this sub-process can be operated via the control panel and programmed freely. Lautering is effected via a continuously adjustable valve. Whereby the Caspary lauter tun ensures smooth and even lautering, a dedicated lauter pump prevents interruptions during lautering. Main characteristics of this brewery - Cast out wort quantity 10 hl at 12 % gravity - Malt though 175 kg/ brew / brew - Max malt milling capacity 500 kg/h - Mash & wort kettle; wort heating in two steps, first heating with double walled bottom and actual wort boiling with internal steam heater - All tanks, vessels, pipes and supports are made of stainless steel 1.4301 / ANSI 304

IMA Celik, Turkey Vertical, outdoor


Bright Beer Tank BBT 2 x 1800 hl IMA These vertical outdoor BBT’s were made by IMA Celik in 2001. Manufacturer: IMA Celik, Turkey Type: Vertical, outdoor Year: 2001 Capacity: 1.800 hl (total), 1.750 hl (useful) Number of tanks: 2 Pressure: 2.0 bar (working), 2.6 bar (test) Dimensions: 16.208 mm (height), 4.200 mm (inside diameter) Weight: 8.100 kg without insulation Insulation: HR Polyurethane foam, thickness 150 mm (cyl), 120 mm (cone) Cooling: 1 zone, glycol Support: Ring-supported from the bottom

Krones AG PET Hot Fill 330 and 500 ml


Filling Line Krones PET 25 000 bpf, hot filling, semi aseptic The line was delivered by Krones in 2009 and some machinery was added in 2014, operating hours from 1000 to 11 000 hours / machine. Main equipment is upgraded with latest modernization of Krones and it is in excellent condition. Line is still installed and fully operational. It has been filling 0.33 and 0.5 liter PET bottles with various non-carbonated, fruit juice based drinks at filling temperatures of 85-90 C. The line has sleeve labeling and two Variopac Pro secondary packing machines which will allow versatile packaging possibilities in tray-shrink, pad-shrink and only shrink combinations. Palletizing line with pallet wrapper is not a part of the delivery. The line has Siemens Simatic S 7 control PLCs with operator Krones Touch Screens as operating interfaces and all latest programs has a digital backups. Original documentation is available in English language in paper copies as well as CD roms Line main characteristics Made by Krones AG Machines made in year 2009 – 2014 Suitable for Ice tea, juices, still water, milk with fruit flavour, etc. System of filling: Over pressure hot filling, semi aseptic Capacity 25 000 bph Container sizes 330 ml and 500 mm Neck finish Standard 38 mm Secondary packaging pad – shrink / tray – shrink / shrink 6 x 4, 3 x 4, 2 x 4, 2 x 2 Operating hours From 1100 to 11 000 hours/machine PLC Controls Siemens Simatic S7 with Krones Ipanels

Injection molding machines Engel VC 330/80 (Low Run Hours)


Only 28k run hours. At our works in Wellingborough awaiting refurbishment. Tie-barless Engel 80T originally manufactured in 2002. Engel have become renowned for their innovative design which allows this 80T machine to mould with a wide variety of tools that other 80T machines couldn’t fit in. If you’re not familiar with this tie-barless design, feel free to make an appointment to view the machine and take a closer look. Manufacturer: Engel Model: VC 330/80 Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 25 Max Shot Weight (PS) (g): 62 Control System: Microprocessor Lead Time: August Hours: 27786 In Production: Yes Location: STV Machinery Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbished machines are delivered fault free and leak free.

Injection molding machines BOY 220 Procan


The ever popular BOY 22 with Procan controller. These machines are some of the smallest (footprint) wise in the market and have proven to be reliable and cost effective machines over the years. This machine has been extensively refurbished by us, now in tip top condition. This one has a 24mm screw and only 26078 hours on the clock. Manufacturer: BOY Model: 22M Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 22 Screw Diameter (mm): 24 Max Shot Weight (PS) (g): 32 Control System: Procan Lead Time: Immediate Hours: 26060 In Production: Yes Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Injection molding machines Arburg 420M Two Colour Machine


Awaiting refurbishment at our works is an Arburg 420M 1000-250/250 with Multronica controller. The machine is a twin-shot (two-colour) machine with one injection unit mounted horizontally and one injection unit mounted vertically on the tie-bards for injection on the split-line. Both plasticising units are the same injection unit designation and both are fitted with 30mm barrels, each delivering a shot weight of 89g in PS. The tie-bar spacing is 420mm x 420mm. We don’t tend to see many twin shot machines on the market so this a rare example from a top manufacturer. Manufacturer: Arburg Model: 420M 1000-250/250 Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 100 Screw Diameter (mm): 30 & 30 Max Shot Weight (PS) (g): 89 + 89 Control System: Multronica Lead Time: 4 weeks from order In Production: Yes Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 4 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Injection molding machines Arburg 220M Universal


This is an Arburg 220M 350-90U machine which is currently awaiting refurbishment at our works. The ‘U’ range from Arburg allows for the clamp and injection units to be pivoted vertically which is ideal for insert moulding. These machines were an expensive option when originally manufactured so we don’t tend to see them that often on the used market. Manufacturer: Arburg Model: 220M 350-90U Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 35 Control System: Multronica Lead Time: 6 weeks from order In Production: Yes Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 4 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Injection molding machines BOY 55M


55 tonne clamp BOY machine which is currently undergoing refurbishment at our works in Wellingborough. This machine only has 27600 run hours on the clock and is fitted with the popular Procan controller. BOY machines typically offer a very small footprint and this particular model has excellent access under the clamp unit for conveyors and ease of access. Manufacturer: BOY Model: 55M Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 55 Screw Diameter (mm): 38 Max Shot Weight (PS) (g): 122 Control System: Procan Lead Time: 4 weeks from order Hours: 27600 In Production: Yes Location: Wellingborough Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Temperature Test Chamber VÖTSCH VT 7018


Operational overpressure: 25bar, length: 1100mm, width: 1400mm, height: 1800mm.

Roland 605+L


-Five colours plus lack unit size 72x102 cms. -Year 1988, 95 mil. copies -RCI 2 table control for inks and plates registers -Rolandmatic dampening with new Aquapress refrigeration system -Automatic blanket washers, plate punch -Spare rollers and accessories -In production, any print test possible

BOILER & PIPING IND 7181


Tube & Shell: Manuf: "boiler and piping in" Model:7181 Year:2002, 14 sq.m, Test press: 15 bar, Des temp 100C

Heat exchanger BOILER & PIPING IND 7098


Tube & Shell: Manuf: "boiler and piping in" Model:7098 Year:2001, 18 sq.m, Test press: 15 bar, Des temp 100C

Alfa-Laval 250 hl


Flash Pasteurizer Alfa-Laval Flexiterm 250 hl This flash pasteurizer was made by Alfa Laval in 2002, and it has been used for ber pasteurization. Control PLC is Siemens Simatic S 7 -300 with Siemens OP27 control screen. It is in good condition, installed and ready for immediate delivery. Plate heat exhanger Alfa-Laval FRONT 10 FRH Manufacturing year: 2002 Volume 433,8 liters Max work pressure: 16 bar Working Temp: -10/120 C Test Pressure: 21 bar Pump No 1 Alfa Laval LKH 70/280 SSS Manufacturing year 2002 Eletric motor 30 kW Pump No 2 Alfa Laval LKH 5/120 SSS Manufacturing year 2002 Electric motor 11 kW Pump No 3 Alfa Laval LKH 10/163 SSS Manufacturing year 2002 Electric motor 40 kW Beer buffer tank ORTAMN INOX Manufacturing year 1995 Volume 12m3 Pressure 4 Bar Material INOX 304

Press Brakes MVD A 400-4100


Producer ..... MVD Year manufacture/Year overhaul ..... 2013 Bending power ..... 400 t Bending length ..... 4100 mm Number of driven axes ..... 4 Lower compensation movement Type of press drive ..... Hydraulický Main motor power ..... 30 kW Machine weight ..... 20800 kg Control system : ESA S550 Working hours : nearly 100 Can be tested under power .

CNC Milling Machines ETASIS VH 2200


5 Axes ( 3+2) Table size 2400x1400 mm X,Y,Z Travels 2200x1200x1000 mm Spindle speed 12000 rpm Spindle Taper Bt40 Control Unit Siemesn 828D Can be tested under power

HP Scitex FB750


HP Scitex FB750. Industrial large-format UV printer. Offer include: HP Scitex FB750 Printer (L1Q42A) HP Scitex FB5xx/7xx White Upgrade Kit (CQ118A) HP Scitex FB750 Roll Printing Kit (L6E81A) HP Scitex FB750 Extension Tables (L5D71A) (color modes: CMYK+Lc+Lm or CMYK+W) Information: Production date: May, 2015. Condition: excellent Location: Russian Federation Under power. Test is possible. Complete and in working condition. Available immediately. Total pages printed: 16692 (from may 27, 2018) Service and conditions: Full service from HP during all operation period (the last inspection and service - may 25, 2018). New UV lamps (from may 25, 2018) Any checks. Terms of delivery are discussing (EXW, FCA, CIP, FOB). Direct sale from the owner. Sale reason: purchase of more productive machine. Specification: Printing. Modes (m?/hr): Billboard: up to 85 Express: up to 43.6 Outdoor Signage: up to 35.3 Indoor Signage: up to 21.1 Photo: up to 10.3 White ink printing overcoat or undercoat (m?/hr): Outdoor Signage Plus: up to 10.4 Indoor Signage: up to 9.9 Photo: up to 4.7 Print resolution: up to 1200 x 600 dpi Technology: piezoelectric inkjet, UV-curable inks. Ink types: UV-curable, pigment-based ink. Ink cartridge colors: cyan, magenta, yellow, black, light cyan, light magenta, white. Ink cartridge size: 3 liter (cyan, magenta, yellow, black, light cyan, light magenta) / 2 liter (white) Media. Handling: flatbed, sheet feed, and roll feed. Vacuum belt media drive for easy loading and accurate media advance. Rigid media support: two sets of HP Scitex FB750 Extension Tables support rigid materials up to 250 x 305 cm. Maximum sheet weight: 68 kg. Roll-fed media support: HP Scitex FB750 Roll Printing Kit supports flexible media up to 250 cm wide, with a roll diameter of up to 23 cm, up to 81 kg in weight. Thickness: up to 64 mm Applications. POP/POS, Displays, Exterior signage, Exhibition and event graphics, Interior decoration, Directional rigid signage, Outdoor furniture, Short-run packaging, 3D displays. UV energy source: dual shuttered UV lamps. Independent user-selectable control of shutter aperture and of three lamp power levels. Power. Consumption: 1900 watts (printing); 2600 watts (maximum) Requirements: Input voltage - 200 to 240 VAC, single-phase, 50/60 Hz, 12 A max. If to you interestingly this offer – welcome. If you have questions or offers - let me know. Additional information: Boost your profit potential with more versatility. - Expand into high-value applications managing boards up to 120 x 98 inches (302 x 250 cm) - Print on almost any rigid/flexible media1 up to 64 mm (2.5 in); HP inks for high durability and flexibility - Get into specialties, attract new customers; do more—white ink, double-sided, matte/gloss, textured effects - Improved image quality, improved high density photo print modes and high white opacity Gain high productivity and ease of use. - Print indoor quality productively—up to 21.1 m2/hr (227 ft2/hr), and manage long runs with 3-liter HP ink supplies - Efficient workflow lets you load, print, and collect media simultaneously - Save time with multi-image, multi-size capability on up to 6 sheets at the same time and true full bleed - New tabletop roll holder design for flexible substrates enables easy, fast, and efficient short-run printing Count on a true workhorse that’s easy and compact. - Be print ready—rely on HP engineering for proven results and the backing of a partner you can trust - Gain robust performance, sturdy media advance system, and heavy-duty tables—all in a space-saving design - High uptime with automatic maintenance, printhead servicing, and HP Print Care maintenance assistance - Safe work space with fully enclosed printer; HP UV-curable inks do not require special ventilation

Bench Lathes For Precision Mechanics KNUTH BFM-30A


The dimensions of the table- Height: 30 mm Width: 80 mm Length: 38 mm fully functional, trouble-free, system-based, can be tested

Rubber testing devices Ares G2 Rheometer


ARES Classic Rheometer Model G2 Year of manufacture 2003 +/- Open cavity rheometer with 8, 13, 25 or 50 mm diameter geometries in parall plate in cone plate geometry Frequency range is 10^-4 Hz to 15 HZ Torque range is about 10^-7 Nm to 0,1 Nm. Temperature range is from -130 C to 300 C Well maintained

Extruding lines BREYER,GERMANY 150mm


Extrusion line BREYER CellProtect for EVA and POE solar film BREYER CellProtect: high-tech on the sunny side of life The convincing extrusion technology for the production of low shrinkage solar encapsulant film for PV-modules. BREYER offers the complete line including proofed recipe and service: Dosing system, extruder, die, process unit for forming – cooling – ­embossing, winding The BREYER CellProtect system allows much higher speed and therefore higher output compared with conventional systems. Since standard extrusion systems only provide a limited line speed/output, BREYER has developed a forward-looking system for a profitable production of low - shrinkage solar encapsulant film. Your Benefits Huge output Fast start-up lowest shrinkage rate No interlayer film No carrying paper/film No post-annealing Different embossing pattern For solar as well as other applications Production of sample films for premarketing and approval procedure Trials and material tests are possible on BREYER‘s pilot line Further features and properties about our machine components please find on the right hand navigation bar. Technical data Film thickness 0,3 – 0,8 mm Film width up to 1300 mm Performance 350, 500, 850 kg/h Material EVA, POE Versions single layer, multilayer, embossed, smooth

MACCHINARI ELETTRONICA E COLLAUDO


ELECTRONIC MACHINERY AND TESTING We are looking for expressions of interest within 03/07/2018 hours 10:30 in Bergamo (BG) For more information contact us at 0307751645 during office hours Mon. – Fri. 9-13:14-18 -axial components Bender; -component radial Bender; -# 2 card IEMME loaders/Unloaders; -Software testing system with PC HP UEE; -Automated Optical inspection ITRONIK SAK + PC; -# 2 AVI 200 year 2008 Speedprint Silkscreen/SP IEMME; -# 2 hand pallet trucks; -# 3 workbenches with wooden top, blue color; -mechanical Tables; HP Compaq NC 6120-PC; -Digital Signal Generator HP 331 20-A; -# 1 station + # 1 air station; -# 1 soldering station Weller desoldering station # 1/digital + Weller; -SMEMA Conveyor for SMD interface line;

Heidelberg SM74-4P


Machine in excellent condition no rips good electronic and electrical cylinders not repaired test possibilities

Heidelberg SM74-4P


Equipment in perfect condition, not damaged it mechanical, electronic the cylinders are great they never reconditioned machine with possibility of testing ...

Shinohara 52-4


-Four colours Straight machine max size 37x52 cms. -Year 2008, Only 11 mil. impressions -Semi automatic plate change SPC -Shinohara Alcool continuous dampening with Baldwin cooling unit -Console with CIP 3 software installed, all automatic ink and plate registers PCC -Automatic blankets and rollers washers ABW -In production, any print test possible -Top conditions Included CTP SDP-ECO 1630 III R Platesetter: Computer to plate for plates in polyester and paper ( Silver- Digiplate ) -RIP Mitsubishi SDP-RIP, Intelcore 2 Quad Q 6600, Ram 2 Gb

Mechanical Presses Schuler PSt 250-10-400


Press Schuler PSt 250-10-400 The machine is in good technical condition. Crimping force: 250t Number of Instrument Stations: 8 + 1 Band width: 630mm Band feed: 0-630mm Sheet thickness: max. 4mm Bearing weight: 4500kg External diameter max. 1200mm Internal diameter from-to: 410-480mm Engine 60kW Dimensions of the press: 6225 x 3100 x 8425 mm Including unwinding and straightening equipment and transfer. Upon agreement, possible to test.

HEIDELBERG SORM


D189 HEIDELBERG SORM (year 1991) SN 533289 / Format 520 x 740mm/ Alcohol dampening with Technotrans / Weko T6 powder spray / Suction drum in delivery / App. 51 mio. Impressions. Machine in very good working condition, free of damages. Available: Immediately. (test is possible) Location: Belgium

HEIDELBERG MO-E


D150 HEIDELBERG MO-E (year 1990) SN 609450 / Format 480 x 650mm / Conventional dampening / Weko T6 powder spray / Suction drum in delivery / App. 28 mio. Impressions. Machine in very good working condition, free of damages. Available: Immediately. (test is possible) Location: Belgium

CHP Unit Viessmann Vitobloc 200 EM-140


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage parts are reconditioned. Test run was carried out.

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.

Heidelberg SORMZ


ref. 217 Heidelberg SORMZ format 52x74 cm, year 1998, 87 mio. imp., alcohol dampening, 10 000 s/h, stock range 0,03-0,8 mm, print test possible, price: 34 000 EUR FCA

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Lasser-Saurer latest model


we are specialized in schiffili embroidery machines. Inquire for Lassers Saurers and other brands of schiffili embroidery machines
Find used machinery dealers in your country