136,802 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Tea Bag Machine Teepack Constanta You are welcome to visit.
Stainless steel couplings, pipe coupling, pipe sleeve, pipe connection -Manufacturer: TEEKAY, pipe coupling AXILOCK-S Type IV -Inside: Ø 57 mm / 2.2 inch -Pressure: 16 bar -Number: 1x clutch available -Dimensions: 95/85/H90 mm -Weight: 0.9 kg
Croissant moth Teknostamap For wrapping croissants With inlet and outlet conveyor Capacity: 1500 pcs/hr Repaired with new belts and drive roller
Sprockets, duplex sprocket, sprocket -Number of teeth: 23 teeth -Diameter: 345 mm -Total width: 120 mm -Tooth width: 30 mm -Socket: O 90 mm -Number: 3x sprockets available -Price per piece -Weight: 50 kg -other sprockets: in stock
Sprockets, duplex sprocket, sprocket -Sprocket pitch duplex: 1 x 17.02 mm -Number of teeth: 57 teeth -Diameter: 471 mm -Total width: 90 mm -Tooth width: 17 mm -Hole: Ø 90 mm Quantity: 1 piece available Price: per piece -other sprockets also in stock
Milling teeth, milling tooth, wear tooth -Milling teeth: 43 pieces -Hole: Ø 17 mm/Ø 19 mm -various: lengths -Sale/Price: complete -Weight: 11.6 kg
Sprockets, duplex sprocket, sprocket -Sprocket pitch: Duplex 1 1/2 x 1 -Number of teeth: 25 teeth -Diameter: 318 mm -Total width: 100 mm -Tooth width: 24.1 mm -Inside diameter: 80/130 mm -Number: 25x sprockets available -Price: per piece -Weight: 33.5 kg -other sprockets: in stock
Sprockets, duplex sprocket, sprocket -Sprocket: is used -Sprockets duplex: 2 1/2 x 1 1/2 -Number of teeth: 25 teeth -Diameter: 533 mm -Total width: 150 mm -Tooth width: 34 mm -Take: Ø 120 mm -Number: 1x sprockets available -Price: per piece -Weight: 152 kg -other sprockets in stock
Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.
60 cm working width, with teeth
Sprocket, sprockets, single sprocket for roller chain, drive chain -Gear: 76 teeth -Sprocket pitch: 1 x 17.02 mm 16B-1 -Shaft mounting: Inner Ø 50 mm -Dimensions: see drawing in the photos -Number: 4x gears available -Price: per piece -Overall dimensions: Ø 628 x 58 mm -Weight: 38 kg
Pinion shaft, robot 7th axis, AD138mm, 23 teeth, MG1-02634, ABB, new Attention: This is an original product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, - We will be happy to measure the pinion shaft for you 12 months warranty We give you a 12-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and conditions apply, see our website. Austrian law ...
Crocodile Bit 1600mm Kramer, T01-02 Auction-ID: A1-50849-250
Zwick / Roell temperature chamber for AllroundLine Type: TEE160/LN2 40S The TEE160/LN2 40S RS Simulators model is a specialized temperature control chamber that was developed primarily for material testing in combination with ZwickRoell testing machines (especially the AllroundLine) Flexible in use ZwickRoell's innovative temperature control chamber guarantees a flexible testing system tailored to customer needs without compromise. This guarantees reliable test results in the future. The safety door function guarantees the protection of the operator in accordance with European safety regulations. The chamber door serves as a protective door with a tumbler. Accurate temperature control The temperature chamber creates extremely homogeneous and precise conditions for the test specimens in the entire chamber volume. The test results are therefore accurate and repeatab ...
DIGGING BUCKET 1,500 mm attachment tool, excavator bucket bucket with teeth
Resolution: 2400 dpi Manual plate feed line Speed 21 pl/hr. Max. plate size max. 838 x 990 mm mm plate size min. 267 x 215 mm mm
Clamping claws, clamping claws, clamping means, clamping element, clamping iron, clamping means, clamps, mounting brackets, clamps, clamping element, bracket, slot clamp -Clamping height: 60 - 370 mm -Clamping depth: 65 mm -Price: per piece -Number: 2 Stück -Dimensions: 290/80/H450 mm -Weight: 9.6 kg/piece
Gallus R200 (refurbished by Graficon in 2005) Label printing machine Machine definition 1 UV rotary screen + 7x UV letterpress + 1 UV flexo Rotary hot stamp unit (after 5th unit) Printing to glue / liner (2 units) 2x rotary die cutting unit Longitudial slitting Technical parameters: Max. width of material: 222 mm Max printing width: 205 mm Magnetic cylinders: 72, 78, 84, 90, 96, 132, 136 teeth Printing cylinders: 72, 78, 84, 90, 96, 103, 110, 117, 124, 132 teeth Collars for screen: 110, 117, 124, 132, 144, 156, 168 teeth Cores for hot stamp: 72, 78, 84, 96, 103, 110, 117, 124 teeth Find more here - .ucymachines/ Contact us at - sales@ucymachines
Max. Pitch circle diameter External gearing: 300 mm Max. Pitch circle diameter internal gearing: 300 mm Max. Outer diameter of workpiece (equipment): 450 mm max. module: 6 gear hobbing width -max.: 100 mm Max. Helix angle (with tool Ø 125 mm): +/- 45 ° strokes - infinitely variable: 130 - 1300 Hub/min workpiece weight: 1000 kg Minimum distance table top - tool spindle: -55 / +300 mm Maximum distance table top - tool spindle: 200 mm Maximum distance table top - tool spindle: 350 mm Manual Upright side shift: +/- 25 mm Manual swivelling angle of the tool spindle: +/- 0,5 ° Max. Tool speed: 15 UpM Max. Workpiece speed: 27 UpM Max. Tool diameter: 7 Zoll voltage: 400 V frequency: 50 Hz Max. Line power: 70 A total power requirement: 48 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4,27 x 3,11 x 2,87 m control: Siemens Sinumerik 840 C table hole: 40 mm taper in main spind ...
Code: 0311 Brand: CIT MECCANICA Model: V 25 / KS Fully automatic and very precise sharpening and setting machine for band saw blades (normal and spaced teeth) and for sharpening for circular saw blades Technical features Minimum pitch of saw teeth 2 mm Maximum pitch of saw teeth 20 mm Maximum width of bandsaw blades 50 mm Minimum diameter of circular blades 110 mm Maximum diameter of circular blades 600 mm Grinding motor 0,12 Kw Main motor 0,20/0,25 Kw Teeth sharpened per min 35 and 70 Diameter of emery wheels 175 mm Speed of grinding wheel 3000 rpm Gear-box oil SAE 30 1,5 Kg Overall dimensions mm 900 x 650 x 1400 h Weight 115 kg
Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...
max. wheel diameter: 400 mm max. number of teeth: 150 max. module: 5 total power requirement: 16 kW weight of the machine ca.: 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. 2 workspindle units, left and right, which can be set at any angle. CNC controlled: Z and W Axes for tool cr ...
max. wheel diameter: 1010 mm gear width: 0 mm max. module: min. module: total power requirement: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features Automatic roughing and finishing process via pre-settable counter and built-in feed cam. Counter for number of teeth. Counter for number of dressing cycles. 2 built-on dressing units with three dressing diamonds for radiu ...
A tedder with a working width of 3 metres, suitable for haymaking work and designed to turn over and aerate grass or hay to promote homogeneous drying. The machine is equipped with several working teeth. Some teeth on the left and right can be removed, reducing the size of the machine to facilitate movement and circulation on public roads. Features: Type: tedder Width: approx. 3 m Removable side teeth Suitable for agricultural and haymaking work Designed for tractor use Auction-ID: A3-46141-39354
Gear hobbing machine MIKRON 102 Max. workpiece diameter 120 mm Max. Modul 2 Max. lenght of teeth 130 mm Min./max.nr of teeth 6 – 325 Angle on helical gears 0 – 90 °
30T Heat Size EAF Meltshop with Billet Caster Year of Mfg. 2004-2014, installed but never been used. The Equipment was purchased over a 10-year period, starting in 2004. But recently management not get involved in steelmaking. The Buyer needs to invest in completing the Installation. A detailed plant assessment report (prepared by DANIELI) outlines the required works / investment to put it into operation. According to the report, the Steel Making Plant can reach more than 230.000 TPY billets production after adjustments to existing equipment and installation of a LF. The line consists of: • 30 Ton EAF (Electric Arc Furnace) 'CONCAST' Shell: Spout type; Diam. 4.0 M; Shell height 1.3 Int. Panels diam. 3.8 M; Hot heat 5 Ton; Bucket volume 23.0 M³; El. Pitch diam. 900 mm; Electrode diam. 16” 3x buckets charge; Tap-to Tap Time 90 min.; Power on 73 min. Transformer 17/20 M ...
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 132 teeth -Number: 19x saw blades available -Price: per piece -Weight: 10,1 kg/piece
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 88 teeth -Weight: 9,5 kg
SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 176 teeth -Number: 20x saw blades available -Price: per piece -Weight: 10 kg/piece
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 7x saw blades available -Price: per piece -Weight: 6,1 kg/piece
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs
3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...
Spine cutter HORIZON BQ 270 / 440 / 460 Art.: PS2821 Ersatzteil Nr. / parts No. 63643 (9822849) (M011440-03) Quality : Tungsten carbide Made in Germany Dimensions: 178 x 76.1 x 5/4 mm. Number of teeth: 40 (there is a variant for 52 teeth)
Quick Snap brush segment, brush, plastic brush -Outer diameter: Ø 105 mm -Outer segment: Ø 86 mm -Reach: 60 mm -Number of teeth: 20 teeth -Width: approx. 105 mm Price: per piece -Number: 44 available -Weight: 0.35 kg/piece
max. wheel diameter: 120 mm gear width: 130 mm max. module: 2 no. of teeth to be hobbed: 6-325 Z min/max. spiral pitch: 20-5000 mm hobbing length: 130 mm weight of the machine ca.: 860 kg Universal hobbing machine MIKRON 102.05 MPS > External surface gearing Technical Data Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030/800/1520 mm Weight of the machine: 880 kg Colour of the machine: black The data for this ad was created with ModulMWS - the softwa ...
CNC gear grinding machine/tooth flank grinding machine Höfler H4000 Built in 1990 CNC control is old + defective / needs to be replaced (needs retrofit) Wheel diameter - max. 4000 mm Wheel width 1560 mm Module - max. 32 Module - min. 3 Machine weight approx. 120 t Space requirements approx. m Year of Make: 1990 Wheel Ø max. 4,000 mm Module 3 - 32 Bevel angle max. 35 ° Wheel width with straight gearing 1,560 mm Stroke length approx. 1,600 mm Stroke rate 12 - 120 strokes/min. max. workpiece weight approx. 35,000 kg Max. number of teeth 12 - 768 Table size Ø x Bohrg. 1,900 x 750 mm Grinding wheel Ø approx. 500 mm Accessories / Special equipment: Hydrostatic guides in the grinding carriage, table and in all other Guideways Complete sanding chamber encapsulation with sliding doors automatic grinding sequence in several cycles as well as settings for ...
Key data: 360 mm
Reishauer Model RZ362A CNC Gear Grinder Maximum Wheel Diameter: 14.17” Maximum Module: 0.275” Minimum Module: 0.0039” Slide Stroke: 6.88” Maximum Helix Angle: ± 45° Maximum Number of Teeth: 600 Minimum Number of Teeth: 6 Maximum Workpiece Weight: 132 lbs. Grinding Wheel Width: 4.09” Grinding Wheel Diameter: 11.02” – 13.77” Speed of Grinding Worm when Grinding: 1100 – 2330 U/min Speed of Grinding Worm when Profiling: 50 – 95 U/min Feed per Revolution of Workpiece: 0 – 0.133” Grinding Worm Infeed Speed: Up to 99.9mm/min / 3.93 IPM Approximate Weight: 14,553 lbs. EQUIPPED WITH: Reishauer CNC Controls. Dittel MBA2000 Balancing Controller. Elbaron R12D Mist Collector. Kato Motor Generator. Freestanding Hydraulic Unit. Hydraulic Oil Pump-Sump System. Free Standing Electrical Control Cabinet. Tailstock. (2) Wheel Hubs. Manuals and Drawin ...
maximum number of results exceeded
please refine your search
50 € 
