- Spiralmixer with 2 bowls
- For 100 Kg flour or 160 kg dough
- Flour-cover with safty ring
- Head goes automatic heigh
- Hand lock for bowl-trolley
- Bolwl & spiral in stainlees steel and polished
- Electric is complete new with Cables, switches, and buttons.
- New painted in original Diosna RAL color
- Reconditioned: New bearings, new belts, new clutch, etc.
- additional performance from bak-tec including:
You receive our machine already DGUV V3-tested
(Electro-check for professional association, for ...
Newman 2CRT all stainless steel construction semi automatic in line
cap tightener. Two sets of tightening wheels. Variable speed drive.
Maximum speed up to 80 bottles per minute depending on bottles and
application. Fully adjustable torque control. Can cap both round and
rectangular bottles. Cap size range: 16mm to 55mm diameter, including
trigger spray caps. Fully adjustable, no change parts required. Fitted
to a stainless stand complete with guards. Can be mounted over an
existing conveyor. 240v single phase supp ...
bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke:
120 mm morse taper: 3 MK table:: 360 x 515 mm turning speeds: 125 -
2.250 U/min total power requirement: 1,5 / 1,9 kW weight: 270 kg
height of the machine: 1,84 m This ad was created with MODUL MWS -
the software solution of LogoTech.
ampere: 120 A Stromquelle cutting range for steel to: 0,3 - 30,0 mm St
cutting medium: 5 - 8 bar Druckluft cutting range: 3.000 x 1.500 mm
repeating accuracy: 0,2 mm connected load: 400 V 50 Hz traversing
speed: 0 - 20.000 mm/min. weight of the machine ca.: 550 kg. Overall
size: 1.900 x 3.500 mm This ad was created with MODUL MWS - the
software solution of LogoTech.
Mettler-Toledo Garvens XS2 high speed checkweigher for continuous
weighing and sorting. Capacity 0–400g. Operation from left to right
with maximum through-put up to 65 weighings/minute for bottled liquids
up to 120mm diameter. The electro-magnetic force weighing system is
digital, temperature stable and is maintenance-free. The air reject
station on the operator side operates at 4.8bar typically with air
consumption at approx. 50 Ltrs/hour. All stainless steel construction
with anodised aluminium conveyor parts a ...
pressure: 60 t punching cross-cut in cmm: 30 in 15 oder 24 in 20 mm
stroke: 50 mm round bar steel: 35,0 mm square edge steel: 32,0 mm
L-beam: 100 x 10 mm punching pressure: 600 kN throat: 220 mm flat
steel: 240 x 13 mm rectangle notching till: 10 x 70 mm total power
requirement: 4,0 kW weight of the machine ca.: 1.200 kg. dimensions of
the machine ca.: 540 x 920 x 1.800 mm This ad was created with MODUL
MWS - the software solution of LogoTech.
Industrial universal smoke and cooking plant built in 2006 cooling fan
coil control: TITAN 2 with weight loss detection control panel: 12
"touch screen monitor air cleaning system (catalyst)
electrically operated cpl. Stainless steel mint condition, used
More extensive details and pics on request.
Weight approx.: 11000 kg Dimensions (l x w x h) approx.: 10000 x 2000
x 2000 mm Description: Machine number 98.04.092, max. passage height
of workpieces 80 mm, feed speed steplessly adjustable 5 to 30 m/min,
pressure rollers diameter 60 mm, computer control SMA Terminal PC
1140, fence in machine infeed, for grinding of the surfaces and radii
6 x M 4 aggregates and 1 x K 4 aggregate are mounted, manual axis
adjustment of the M 4 and K 4 aggregates, grinding belt length M 4
aggregate 2300 mm, grinding widths 80, 100, ...
Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 2540 x 1500 x
3570 mm Description: HöCKER PLOYTECHNIK MultiStar VT Extraction
System MultiStar filter VT in modular design, with vibration device,
for adjustment outside explosion hazardous areas. - galvanized,
self-supporting sheet steel construction - Pressureshock resistance
22000Pa - Housing negative pressure resistance up to max. 5000Pa -
EU-type tested bursting discs, negative pressure resistant up to
5000Pa - BG-tested needle felt filter material, f ...
Grinding length: 630 mm
Grinding diameter: 250 mm
Workpiece height: 250 mm
Maximum spindle speed: 6300 RPM
Grinding wheel diameter: 200 mm
Vertically adjustable sanding spindle head: 220 mm
Table clamping surface: 140 x 900 mm
Table adjustment: angled 7° ° re/li
Table path length: 450 mm
Cross table way: 260 mm
Total power: 1.14 kW
Machine weight approx.: approx. 1.0 t
Space requirement approx.: 2 X 1.8 X 1.6 m
Device of part of
motor driven round Sharpener
one used cooking cold rolling line for the automatic production of
reducing and profiling meshwire for 5 ton spulen wire range: inlet
slide 5.5-13.0 mm, finished wire 4.5-12.0 mm max production speed: 8
Weight approx.: 100 kg Dimensions (l x w x h) approx.: 1200 x 1200 x
1650 mm Description: Motor 0.37 kW, tool holder max. 16 mm, speed
stages 455, 655, 1145, 1720 and 2630 rpm, work table 950 x 600 mm,
drill stroke approx. 100 mm, mounted on steel frame with 2 drawers,
cleaning machine for eco-friendly cleaning and degreasing of metall,
plastics, glases etc.
- loading basket 8-squared: 1.400mmx1.400mm
- loading height max.: 800mm
- loading weight max.: 1.000kg
- combined using of spray jet and heated cleaning liqour for highly
- front charging
- stainless steel pump
- stainless steel tank, stained and passivated
- stainless steel heater
- isolated cabinet and door
- isolated tank
- dry run protection for pump and heater
- el ...
Weight approx.: 1800 kg Dimensions (l x w x h) approx.: 6000 x 1500 x
1500 mm Description: Machine number 173/9-904, workpiece thickness 6
to 50 mm, workpiece width min. 60 mm, workpiece length min. 180 mm,
edge thickness max. 5 mm, glue system cartridge 1906, milling unit
1823, printing unit 1913, with one driven and two travelling rollers,
2 cross-cut saw motors 1918, diagonally guided on round steel guides,
flush radius milling unit 1942, scraper unit 1929, form milling unit
1983, motorised corner copying unit, ...
hydraulic concrete steel Benders Krupp Futura B 703 steel bending
with accessories and complete instructions
Tech. Data performance table - steel 50-55 kp/mm2
Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,.
50 mm 2 speed 4-12 / min
Operation - with control or manual, operating dial - HAND - machine
with possibility of 3 bending angle set - every page - 3 links + 3
complete documentation, operating instructions
much accessories more info upon request
You can edit, flat, round ...