schlatter cnc used for sale

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

Straight & Cut Schlatter Syrocut 2 - refurbished with new PLC 2020 Diameter: 2 - 8 mm (Equipped for 3 - 6 mm) Length: 3500 mm

Amperage range maximum: 0 A Amperage range minimum: 0 A Technical data Connection output: up to: 225 kVA Range: up to: 200 mm Working stroke: 0 - 80 mm Power of electrodes: up to: 3000 kp Working table surface: Length: 250 mm Width: 250 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 700 mm Width: 1900 mm Height: 2400 mm Various accessories: Watercooled Déclanchement à deux mains

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS 2. AWAILIBLE Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm

working area: 1 - max. 6 mm rated capacity: 10 kVA quality: auf Fahrgestell quality: mit Nachglüheinrichtung grinding stone: . shears: . : 380 V, 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MG 900 Schlatter Width: 1250 mm Length: 2000 mm Diameter 2-8 mm Pull in Pull out Cross Wire Magazine Stacker

Schlatter coordinate Orion Flex Range: 1350 x 600 mm MY: 2003

One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack

Spot welder, spot welder, spot welder, spot welder -Stationary -Operation by hand switch -Arm length welding machine: 350 mm -Welding gun type: -Control -Dimensions machine: 1500/1000/H1670 mm -Weight machine: 774 kg -Dimensions control cabinet: 1550/420/H1960 mm -Weight control cabinet: 330 kg

One used SCHLATTER MG330 high performance mesh welding line for standard mesh in sheets Actual production output: 100t/shift Very complete with line wire pay offs, automatic tying system and many extras

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

CNC control NUMERIK Karl-Marx-Stadt, VEM CNC 600-3 CNC 666311291622216 B.: 1985 Operating voltage: 220 V AC 50 / 60 Hz Power consumption: 1.0 kW used, tested ! Dimensions: 700 x 600 x 2000 mm

Description: Mach. No. 210425108 Operating hours 81886 High-speed spindle HSK E40 6.5 kW, with 90 degree milling head and high-speed tool change milling spindle, 2,000 to 36,000 rot/min Table dimensions 1700 x 6170 mm (2 x) Travel path X 4250 mm Travel distance Y 4350 mm Travel distance Z 1050 mm Pressure consumption approx. 800 liters per hour Pneumatic pressure 6 bar Nominal voltage 400 V, 50 Hz Control voltage 24 V Nominal power 23.5 kW Fuse 63 A Circuit diagram no. 210424 Control system SINUMERIK 840 Installation dimensions approx. (LxWxH) 5300x2600x2300 Installation dimensions approx. (LxWxH) 5300x2350x2300 Weight approx. 9000 Installation dimensions approx. (LxWxH) 1200x800x1000 Weight approx. vacuum pump/cooling unit 300 Installation dimensions approx. (LxWxH) 1600x2300x2200 Control cabinet 1200 kg Weight approx. 10,500 ATTENTION - Tools, drills etc. are N ...

Description: Mach. No. 210425408 Operating hours 78805 High-speed spindle HSK E40 6.5 kW, with 90 degree milling head and high-speed tool change milling spindle, 2,000 to 36,000 rot/min Table dimensions 1700 x 6170 mm (2 x) Travel path X 4250 mm Travel distance Y 4350 mm Travel distance Z 1050 mm Pressure consumption approx. 800 liters per hour Pneumatic pressure 6 bar Nominal voltage 400 V, 50 Hz Control voltage 24 V Nominal power 23.5 kW Fuse 63 A Circuit diagram no. 210424 Control system SINUMERIK 840 Installation dimensions approx. (LxWxH) 5300x2600x2300 Installation dimensions approx. (LxWxH) 5300x2350x2300 Weight approx. 9000 Installation dimensions approx. (LxWxH) 1200x800x1000 Weight approx. vacuum pump/cooling unit 300 Installation dimensions approx. (LxWxH) 1600x2300x2200 Control cabinet 1200 kg Weight approx. 10,500 Dimensions approx. 1600 x 2300 x 2200  ...

Description: Mach. No. 210425108 Operating hours 80368 High-speed spindle HSK E40 6.5 kW, with 90 degree milling head and high-speed tool change milling spindle, 2,000 to 36,000 rot/min Table dimensions 1700 x 6170 mm (2 x) Travel path X 4250 mm Travel distance Y 4350 mm Travel distance Z 1050 mm Pressure consumption approx. 800 liters per hour Pneumatic pressure 6 bar Nominal voltage 400 V, 50 Hz Control voltage 24 V Nominal power 23.5 kW Fuse 63 A Circuit diagram no. 210424 Control system SINUMERIK 840 Installation dimensions approx. (LxWxH) 5300x2600x2300 Installation dimensions approx. (LxWxH) 5300x2350x2300 Weight approx. 9000 Installation dimensions approx. (LxWxH) 1200x800x1000 Weight approx. vacuum pump/cooling unit 300 Installation dimensions approx. (LxWxH) 1600x2300x2200 Control cabinet 1200 kg Weight approx. 10,500 ATTENTION - Tools, drills etc. are N ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

SHODA-CNC Router (6) main heads-(6) piggy back heads- model NC 516-1326, (2) 51x102 vacuum tables- 15M FANUC Controller, (2) vacuum pumps 7-1/2 hp. each- 1995 very low hours, ……….…………..Price-$15,000 reduced

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

more tech. Details on request

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

Year of construction: 1998 Control: NUM with cellar software -4-way steel holder machine Dre diameter over bed: 1000 mm Dre Ø over carriage: 620 mm intake: CL 11 motor spindle: 37 kW speed 1500 rpm. Spindle bore: 105 mm Reitstock-Ø 125 mm Weight: approx. 8500 kg

; very good condition, ready for operation

Technische Daten: - Schnittlänge 3200 mm - Schnittbreite 1250 mm - Schnitthöhe 90C 130 mm - Schnitthöhe 45C 90 mm - Sägeblatt 45C schwenkbar - max. Sägeblattdurchmesser 400 mm - Durchmesser Ritzsägeblatt 120 x 20 mm - Drehzahl Hauptsägeblatt 3000 / 4000 / 5000 Upm. - Drehzahl Ritzsägeblatt 8000 Upm. - Motor 7,5 kW / 400 V - Motor Vorritzer 0,75 PS - Schiebetischprofil Breite 420 mm - Gusstisch 1020 x 690 mm - Absaugstutzen 90 mm und 100 mm - Platzbedarf L=6700, B=3350, H=1500 mm - Transportabmessungen L=2300, B=1200, H=910 mm                                                L=3600, B=505, H=280 mm -Gewicht 1000 kg Inklusive: - Sägewagen mit wartungsarmer Rundstangenführung - bedienfreundliche CNC Steuerung von 3-Achsen - motorische Höhenverstellung mit digitaler Anzeige im Monitor - motorische Schwenkverstellung mit digitaler Anzeige Monitor - motorische  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS 840 D Technical data Number of axis total: 7 Number of spindles: 2 Number of revolvers: 2 Spindle nose: DIN 55026 A4 Spindle hole: 32 mm Travels: X1: 180 mm X2: 195 mm Z1: 340 mm Z2: 440 mm Y1: +40/-40 mm Y2: +40/-25 mm Y axis: 70 (-30/+40) mm Turret slide: number: 2 Number of positions turret 1: 16 Number of positions turret 2: 12 Driven tools turret 1: 16 Driven tools turret 2: 12 Spindle speeds: 6000 rpm Power of driven tools: 6 kW Spindle nose: VDI: 25 DIN 69880 Main spindle: C axis Spindle speeds: stepless up to: 8000 rpm Back spindle mobile: max. speed: 8000 rpm Power of back spindle: 12 kW Spindle motor: 7 - 9 kW Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Total power required: 25 kVA Total power required: 20 kW Machine ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 210i-T Technical data Distance between centres: 2000 mm Turning diameter over cross-slide: 370 mm Swing over bed: 554 mm Spindle nose: D1-11 Spindle hole: 104 mm Maximum turning length: 2000 mm Cross slide: Longitudinal travel (Z-axis): 1920 mm Transversal strocke (X axis): 290 mm Main spindle: Taper in spindle: Camlock: D1-6 CAMLOCK Spindle speeds: number (steps): 3 from: 16 rpm up to: 1800 rpm Taper in tailstock: Morse taper: 6 MT Spindle stroke: 178 mm Spindle diameter: 95 mm Rapid traverse:: 10 m/min Spindle motor: 11 / 7.5 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 1800 mm Height: 1700 mm Various accessories: 3-jaw chuck diameter: 400 mm 4-jaw chuck diamet ...

Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels

DATA ON THE MACHINE Machine type: Handwheel Manufacturer: MAHO Model: CNC Condition: ready for use (used) Price 400 â?¬ FP net plus VAT Location Warstein , Germany Reference M-MAH-1119-6 Description We offer you a used handwheel from the manufacturer MAHO Nterv suitable for e.g. MAHO MH700 Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Operating hours: 2330 Technical data Number of spindles: 2 Number of revolvers: 2 Distance spindle nose: 250 - 870 mm Maximum turning length: 160 mm Max. turning diameter: 130 mm Turret carriage: Carriage 1: Longitudinal travel (Z-axis): 200 mm Longitudinal travel (X-axis): 180 mm Transversal travel (y-axis): +/-30 mm Carriage 2: Longitudinal travel (X-axis): 180 mm Cross travel (z-axis): 620 mm Y axis: +/-30 mm Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 6 Driven tools turret 2: 6 Spindle speeds: 3600 rpm Power of driven tools: 3.7 / 2.2 kW Main spindle: Internal spindle diameter: 42 mm Spindle speeds: stepless up to: 5500 rpm Spindle power: 7.5 kW Back spindle: Spindle hole: 40 mm max. sp ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 11069 Technical data Number of spindles: 2 Number of revolvers: 2 Distance spindle nose: 560 mm Turret slide: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 6 Driven tools turret 2: 6 Spindle speeds: 100 - 3000 rpm Tool shank cross section: 20 mm Power of driven tools: 1.5 / 3.7 kW Max. drill capacity: 25 mm Indexing time: 0.4 sec Upper turret head: X axis: 175 mm Z axis: 305 mm Lower turret head: X axis: 132 mm Y axis: 340 mm Z axis: 155 mm Main spindle: Spindle nose: ASA 5" Spindle hole: 52 mm Inner taper type: DIN 6343 Max. bar diameter: 41 mm Max. turning diameter: 200 mm Maximum turning length: 300 mm C axis (spindle,resolution): 0.001 ° Spindle speed ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...

Five - Axes CNC - controlled machining center with combined sawing and milling unit for machining sheet material made of marble, granite, ceramics and other hard materials by sawing, drilling and milling - brand new. Largest workpiece dimensions 3,500 x 1,900 mm Travel Z - axis (vertical) 350 mm Largest workpiece height 150 mm Combined sawand and milling unit with two axes - C - Axis 360° A - Axis (tilting range) 90° Saw blade diameter from 300 to 500 mm Largest cutter diameter 50 mm (crown drills and grinding tools larger) Saw and milling spindle drive power 11 kW Spindle speeds 600 to 6,000 rpm Hydraulically swivelling work table with pneumatically extendable rollers Dimensions (without safety enclosure according to CE) 5.18 x 2.85 m x H 2.5 m Weight 2,700 kg Facilities: - CNC control with TOUCH SCREEN and color graphics - Hot-dip galvanized base frame and t ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MONFORTS CONTROL SYSTEM MTC Technical data Centre height: 250 mm Distance between centres: 1500 mm Swing over cross-slide: 290 mm Swing over bed: 500 mm Taper in spindle: DIN 55027 Carriage: Transversal strocke (X axis): 265 mm Spindle speeds: number (steps): 3 from: 3 rpm up to: 2800 rpm Taper in tailstock: Morse taper: 5 MT Spindle stroke: 160 mm Spindle diameter: 80 mm Rapid traverse X: 5 m/min Rapid traverse Z: 10 m/min Spindle motor: 16.5 kW Voltage 50 Hz 3x: 400 Volt Total power required: 16 kVA Machine´s weight about: 3000 kg Various accessories: 3-jaw chuck diameter: ROTA-S 250 mm 4-jaw chuck diameter: 250 mm Set of jaws Set of jaws hard Travelling steady Lamp Tailstock Coolant system Interface serial port RS 232 Chip conveyor  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MAZATROL PC Fusion 640M Operating hours: 77200 Technical data Number of axis total: 9 Number of spindles: 2 Spindle hole: 88 mm Turning diameter: 610 mm Turning length: 1105 mm Carriage: Longitudinal travel (X-axis): 1137 mm Transversal strocke (X axis): 580 mm Transversal travel (y-axis): 210 mm Tool magazine stationary, number of tools: 80 KM 63 C axis (spindle,resolution): 0 - 360 ° / 0.001 ° Spindle speeds: stepless from: 35 rpm up to: 3500 rpm Milling cutter speeds: 10000 rpm Rapid traverse X: 30 m/min Rapid traverse Z: 20 m/min Rapid traverse Y: 15 m/min Total power required: 26 kW Machine´s weight about: 12000 kg Overall dimensions machine: Length: 5300 mm Width: 3000 mm Height: 2800 mm Various accessories: 3-jaw chuck diameter: 2 ...

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: NUM Technical data Spindle hole: 43 mm Carriage 1: Longitudinal travel (Z-axis): 240 mm Transversal strocke (X axis): 150 mm Transversal travel (y-axis): 100 mm Carriage 2: Longitudinal travel (X-axis): 340 mm Cross travel (z-axis): 340 mm Y axis: 100 mm Turret slide: Number of positions: 16 Number of positions turret back side: 8 Driven tools turret 1: 16 Back spindle: Voltage 50 Hz 3x: 400 Volt Total power required: 17 kW Various accessories: High pression colant device Paper filter facility Oil mist extractor Bar feeder: LNS Interface serial port RS 232 Chip conveyor Toolholders Set of toolholders Driven tool holder radial (nbr.): 5 Driven tool holder axial (nbr.): 9 Tool holder fix (nbr.): 6 Tool holder (number): 6

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 21i-TB Operating hours: 3692 Technical data Taper in spindle: A2-5 Spindle hole: 51 mm Turning diameter: 300 mm Bar diameter with collet: 24 / 36 mm Carriage: Longitudinal travel (Z-axis): 370 mm Cross travel (x-axis): 210 mm Turret slide: number: 1 Driven tools turret 1: 12 Spindle speeds: 30 - 6000 rpm Power of driven tools: 2.2 / 3.7 kW C axis (spindle,resolution): 0.001 ° Spindle speeds: stepless from: 50 rpm up to: 5000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 10000 mm/min transversal from: 1 mm/min up to: 10000 mm/min Rapid traverse:: 10 m/min Machine´s weight about: 3000 kg Overall dimensions machine: Length: 2530 mm Width: 1400 mm Height: 1840 mm Various accessories: Lamp Coolant system Foot pedal

- spindle bore: 26 mm - max. spindle speed: 5.000 1/min - turret with 6 stations (not driven) - 2x cross slides - 2x vertical slides - only worked with plastic accessories - barfeeder FMB turbo 3-26 dimensions LxWxH: - machine 1600 x 1220 x 1740 mm - barfeeder 3300 x 700 x 1300 mm weight overall: 1.700 kg