saws used for sale

Graule ZS 170NF Cutting and miter circular saws Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 430 mm (at 90°) Cutting height 170 mm (at 90°) Miter range: horizontal 45°-90°-25° Miter range: vertical 90°-45° (left) Saw blade s. 420 mm Suction nozzle 100 mm Weight 120 kg

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

Hand cabinets for gate saws Tsa

CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 59900 Net price: 12882EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with large ...

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz

Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...

Saw units: 2 Cutting length max mm: 2200 Cutting height mm: 70 Saw blades tiltable: Yes Diameter saw blade mm: 250 Cutting length min mm: 240 Main motor kW: 1.1 Pneumatic tensioner: Yes Saw feed: pneumatic

Automatic optimization crosscut saw: Technical data: Follow later!

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...

Weibert Z-400-EL Format circular saw Sliding table 420x3200 mm anodized, cutting length 3500 mm Motorized height adjustment and inclined position saw blade 3 Cutting speeds: 3000/4000/5000 rpm Car. Star/Triangle Switch 7KW 400V 50HZ Vorritz engine 1.3 kW 3 Cutting speeds: 3000/4000/5000 rpm Cutting height at 90° 125 mm, at 45° 90 mm Cutting width between saw blade and parallel stop 1350 mm Laying table (1420 x 650 mm) with miter stop with 2 folding stops G&RO-Z-400-EL

Cutting speeds: 40/80/min Mitre range: left up to 45° / right up to 60° The saw frame is brought to the starting position by hand. The lowering speed is controlled by a throttle valve (on the countersink cylinder) and as soon as the saw frame has reached the end position, the belt run switches off. You don't have to stand by the machine when sawing. The saw has an electric cooling water pump and a service has been carried out on the saw. The vice has a quick-release device Options: 1x saw blade 2720x27x0.9mm Number of teeth of your choice - from 5 saw blades 5% - from 10 saw blades 10% 5kg coolant concentrate 10kg coolant concentrate

Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Engine power of the saw blade 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balancing and durability. Shock-absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. Carbide circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system by means of new ball bearings with double dust protection and automatic lubrication system. CE-comp ...

Type MJ900-X3 Spindle diameter 74 mm Diameter of sawblades 205 mm Cutting width 900 mm Cutting thickness 5-25 mm Speed 2600 rpm Motor power 15 kW Feed speed 0-12 m/min. Feeding motor 1,5 kW Transport dimensions 2100x1400x1350 mm Weight 1700 kg Delivery term: ~ 3 months.

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

CATALOG NO. 6887 TECHNICAL SPECIFICATIONS - track width 340mm - shaft width 350mm - max disc diameter 400mm - blade bore diameter 70mm - max cutting height 130mm in advance: - 2 rows of ratchets - 2 smooth pressure shafts, slip shafts -Pressure - shaft with saws - 2 smooth pressure shafts, slip shafts from below: -Guide -Triggers -caterpillar - smooth regulation of feed speed - electric body lifting - main engine 37kW - feed motor 1,5kW - central lubrication - table top dimension 1930x840mm - dimensions length / width / height 2250x1650x1600mm - weight 2900kg – Italian production – used multi-saw – very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

TECHNICAL DATA: Max working length mm: 3100 Min workable length mm: 500 Tilting blade: 0-45 ° Blade diameter max mm: 300 02 Saw aggregates Ø 300 + 02 Scoring aggregates - Ø 120 Central Saw Aggregate Automatic destacking 4-axis numerical control Total electric power KW: 10 Weight Kg: 2200

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

AUTOMATIC CUT-OFF SAW model STROMAB TR 600 second hand machine in excellent working conditions CE regulation : YES machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table mm.3000 on right side from saw blade with idle rollers diam.mm.90 working table mm.2000 on left side of saw blade with idle rollers diam.mm.90 n.1 saw blade diam. mm. 600 n.3 side stopper on fence right side of the saw blade technical data: motor power saw blade Hp 12 / Kw 9 motor power hydraulic unit Hp 1,5 / Kw 1,1 saw blade diam. mm.600 speed saw spindle rpm 3000 working hight over ground floor 850 mm working pressure 8 bar weight 450 kg

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...

Saegebaender Roentgen, new

Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg

HBS 533 band saw new Engine: 1.5 KW/ 400 V Cutting height: 270mm Cutting width: 514mm Roll diameter 530mm Precision roller guide Band length: 3865mm Table inclination -10°-+45° Weight: 163kg

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

ORDER NO. 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max disc diameter 400mm - disc bore diameter 80mm - max cutting height 140mm - table top width with clearance 730mm - tabletop length 2130mm in advance: -Triggers - pressure shaft, sliding roller -Triggers - pressure roller, smooth - shaft with saws - smooth pressure shaft 4 pcs From below: - Slip shaft, smooth -Triggers -caterpillar Feeding table + guide rail - roll width 460mm - feeder dimensions length/width 1660x630mm - total dimensions length/width/height 2010x630x900mm Take-up table - pulling rollers 8 pcs - roll width 800mm - total dimensions length/width/height 4400x980x880mm - Central lubrication - electric lifting of the body up/down 0.55kW - electric shaft adjustment with 0.55kW saws - smooth adjustment of the feed speed 1-39m/min - feed motor 1.1k ...

ORDER NUMBER 7213 TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm C9znbyq - max disc diameter 300mm - disc bore diameter 80mm - min element length 630mm - max element width 600mm in advance: - pneumatic clamp -Triggers - pressure shaft, metal 2 pcs -Triggers - shaft with saws - pressure roller, smooth -Triggers - pressure roller, smooth From below: - metal shaft, pulling, toothed 2 pcs -Triggers -caterpillar - shaft with saws -caterpillar - infinitely variable feed speed control on the inverter - main engines 2x55kW - 4kW feed motor - hydraulic lifting of the body up/down - hydraulic adjustment of shafts with saws - pump motor 0.37kW - Central lubrication - diameter of the extraction spigot 1x300mm, 1x380mm - dimensions length/width/height 3200x2350x2000mm - weight about 5500kg ADVANTAGES � ...

Weibert BS 610 Wooden band saw Work table: 650 x 800mm Cutting height 360mm Swivel -15° +45° Engine power 4 KW Bandwidth: 6 to 40mm Band length 4900mm Suction nozzle 2x 100mm WJ-X00610 mel k options: Table swivel with handwheel adjustment Miter attack 5 KW motor Driving equipment Circular cutting device

Weibert WJ-K315 Format circular saw Format sliding table: 2550mm Engine power: 4 KW (5.5 hp), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° WJ-800100

Cutting length mm: 4500. Cutting depth mm: 4500 Number of pliers: 7 Installed power KW: 15 Diameter saw blade mm: 300 Vorritzer: Yes Discharge tables pneumatic: 3 Weight Kg: 3100 CE marking

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 450x320 saw band length: 4250x34x1,1 mm band speed: 40 + 80 m/min table height: 845 mm saw band width: 34 mm total power requirement: 2,2 kW weight of the machine ca.: 0,985 t dimensions of the machine ca.: 1,4 x 2,0 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

see pdf attached

SPECIFICATIONS: 45° glass strip saw Machining area mm: 2,700 x 1,000

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

I sell a vertical panel saw standing with vorritzer GMC KGS400E, built in 2007, as good as new. Cutting surface 4500x2100mm Engine 3kW. Sawing unit swivel 0-90° Main saw blade diameter 240-250mm / 5200rpm. With vorritzer 104-110 x 20mm / 7000rpm. Manual cutting. Weight 665kg. Condition as new. Available the same.

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides