sawing used for sale

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

Automatische nachschnittsaege,saummeranlage Mohringer 3 bewegischesaege steuerung microtec baujahr 2009 komplete anlage

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles

SECOND-HAND CIRCULAR SAW SCM MOD. SI450 N - carriage mm. 3800 - Cutting width 1270 mm on parallel fence - motor 7.5kw - year 2006 (CE)

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Pneumatically adjustable angle between 45° and 90° Pneumatic material tensioners Suction Max. saw blade diameter: 500 mm

FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

MEP Condor 90 CNC HR BJ Säge 2002 BJ Barrenmagazin 2013 Find more here - / Contact us at -

Key data: 350 mm, 100 mm

Automatic with power gearbox also for high-alloy materials.

SPECIFICATIONS: Installed power: 2.2 kW Automatic saw blade return Automatic lubrication

Brand: Meniconi Putsch Type: CA-75-BR Kind: Sawing machine Assets: 18A Length mm: 4,500 Depth mm: 1,200 (1,900 incl. bridge) Height mm: 3,400 ex. bridge Electrical diagram: Present Other: Has some defects, will be resolved before delivery.

Optimum Opti S 275 G Max height of workpiece: 225 mm Sawspeed: 45 > 90 m/min Length of band saw: 2480 x 27 x 0,9 mm Power needed: 1,1 kW Length : 1360 mm Depth : 510 mm Height: 1690 mm Weight: 200 kg

Semi automatic bandsaw Depth of throat: 500 Max height of workpiece: 335 mm Sawspeed: 15 - 150 m/min Length of band saw: 4400 x 34 x 1,1 mm Power needed: 3 kW Length : 1250 mm Depth : 2200 mm Height: 1900 mm Weight: 1 ton

saw blade diameter: 130 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm capacity 90 degrees: flat: 180 x 100 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: flat: 120 x 100 mm engine: 3,3 / 4,4 KW 0: 1400 / 2800 U/min weight of the machine ca.: 1060 kg dimensions: 2,5 x 1,8 x 1,85 m TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Elumatec circular saw

Afkortmachine met één kop en oplopend mes voor het zagen van grote secties, ontworpen voor 90° snijden. Een opvallend kenmerk van dit product is de optimale kwaliteit van het snijvlak, gecombineerd met herhaalbaarheid en nauwkeurigheid. De mesaanvoer is pneumatisch. 2 verticale pneumatische klemmen 2 horizontale pneumatische klemmen max. vlak werkstuk: 600 x 50 mm max. rechthoekig werkstuk: 150 x 340 mm / 200 x 280 mm Dia saw / abrasive - disk : 650 mm Power needed / motorpower: 5,5 kW

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

Band Sawing Machine MEP SHARK 281, Information about technical data are not binding., Machine available subject to prior sale., Max cutting capacity Ø: 250 mm, Max cutting capacity: 280x200 mm, Blade dimension: 2950x27x0,9 mm, Band speed range: 36 - 72 m/1, Blade motor power: 1,5 - 1,8 Kw, Working plane height: 950 mm, Weight: 370 Kg

met 13 meter invoerrollenbaan met digitale uitlezing Dia saw / abrasive - disk : 400 mm Turningspeeds: 10/20 m/min Weight: 1250 kg

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

Full automatic bandsaw with bundle clamp and autofeed CNC controlled angle positioning workpiece width in bundle clamping: 0-300 mm workpiece height in bundle clamping: 5-300 mm single material feed length: 0-600 mm repeated material feed length: 0-9999 mm maximum cutting capacity (90°, round): 325 mm maximum cutting capacity (90°, rectangle): 500 x 300 mm right mitre cut (45°, round): 300 mm right mitre cut (45°, rectangle): 300 x 300 mm right mitre cut (30°, round): 200 mm right mitre cut (30°, rectangle): 200 x 200 mm left mitre cut (45°, round): 300 mm left mitre cut (45°, rectangle): 300 x 300 mm Depth of throat: 500 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4400 x 34 x 1.1 mm Length : 2680 mm Depth : 2350 mm Height: 1350 mm Weight: 1800 kg

Serie: 2070 Zaagbladdiameter: 500 mm Maximale snelheid: 2800 tpm Gewicht: 320 kg

Max. diameter of the cut material ... 200mm Main engine power... 2.2kW Machine weight ... 170kg

Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1.5 / 2.2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 / 110 mm capacity 45 degrees: square: 100x100 / 95x95 mm capacity 45 degrees: flat: 135 x 60 mm turning speeds: 1700 / 3400 U/min Control: MEP CNC total power requirement: 2.6 / 3.5 kW weight of the machine ca.: 605 kg range L-W-H: 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw For cuts from 45° right to 45° left In aluminum and light metal alloys - MEP microprocessor control Simple user interface with display and mechanical buttons Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Pneumatic clamping system allow ...

The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power  ...

Key data: 400 mm

Saw blade diameter 400 mm Cutting diameter 130 mm Cutting area at 90 degrees: square 120 x 120 mm Cutting area at 90 degrees: flat 220 x 80 mm Feed length 600 mm Feed length multiple 1800 mm Cutting speed 10/13/15/20/26/30 m/min Miter cuts -/+ grade 60 Total power requirement 5.5 kW Machine weight approx. 2,600 kg - with mitre adjustment +/- 60 ° with digital display - Accessories: roller track, documentation, various circular saw blades

Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW

Opus 550 TF Table dimensions: 600 x 760 mm Depth of throat: 550 mm Max height of workpiece: 430 mm Sawspeed: 120x1200 m/min Length of band saw: 4700 x 27 mm Power needed: 4.2 kW Weight: 900 kg

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x2900x850 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x2900x850 mm Weight: 1280 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2540x2900x850 mm Weight: 1200 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.