sawing used for sale

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Cut range: round 90° full: 50 mm Execution: Automatic Saw blade diameter: 250 mm Max. saw blade diameter: 250 mm Min. saw blade diameter: 175 mm Cut range: Square max.: 36 mm Cut length: up to: 300 mm Saw blade size: central bore: 32 mm Speeds: number (steps): 2 from: 27 rpm up to: 54 rpm Voltage 50 Hz 3x: 380 Volt Power: 2 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1400 mm Width: 750 mm Height: 1300 mm Various accessories: Automatic forward feed Coolant system

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Execution: semi-automatic Swivelling range: +/- 90 ° Saw blade diameter: 300 mm Max. saw blade diameter: 315 mm Cut range: round max. tube: 100 mm Max. automatic advance length: 500 mm Voltage 50 Hz 3x: 380 Volt Power: 4.33 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1500 mm Width: 800 mm Height: 1700 mm Various accessories: Automatic forward feed Coolant system Material bearing lenght: 3200 m Machine base

Capacity round maximum diameter: 125 mm Angle degrees maximum: 120 Feeding length automatic feeder: 0 mm Diameter sawing blade: 400 mm MACH-id     5471 MAKE          Kaltenbach TYPE            KKS 400 E YOP              SPECIFICATIONS        Cutting 90°      125 Ø Cutting flat    90°120 x 120 mm Saw band size        400 mm Power        2.7 kW DIMENSIONS Length          1000 mm Width           5000 mm Height           1800 mm Weight            2000 kg incl. PEHU Backstop system

Capacity round maximum diameter: 130 mm Angle degrees maximum: 90 Feeding length automatic feeder: 0 mm Diameter sawing blade: 370 mm MACH-id    5176 MAKE        IMET Italia TYPE          SIRIO 370 SH-E / ESC YOP            2016 SPECIFICATIONS Bandsaw / Circelblade / Automat       Disc Saw Angle L / R Degrees      - 45 / 90 / + 30 Cutting capacity 90 ˚ Ø    130 mm Cuttting capacity 90 ˚ Flatt       180 x 100 mm blade dimensions     370 mm roller conveyor / push up / measuring     6000 Cutting speed M/min    70 M/min DIMENSIONS Length       14.000 mm Width          2.000 mm Height        2.000 mm

Capacity round maximum diameter: 100 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm MACH-id  3527 MAKE  Huvema Holland TYPE  HU 315 CKL YEAR  2005 SPECIFICATIONS Bandsaw / Circelblade / Automat   Circel blade Angle L / R Degrees  L & R Cutitng 45 Gr Cutting capacity 90 ˚ Ø100 mm Cuttting capacity 90 ˚ Flatt  100 x 100 mm Cutting capacity 45˚ Ø  100 mm Cuttting capacity 45 ˚ Flatt   90 x 90 mm blade dimensions  315 x 2.5 x 40 mm Cutting speed M/min18 / 36 M/min DIMENSIONS Length   780 mm Width  820 mm Height  1480 mm

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Execution: manual Table: Length: 330 mm Width: 200 mm Saw blade diameter: 200 mm Saw blade thickness: 6.5 mm Rotation speed: 2700 rpm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 200 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1300 mm Various accessories: Set of blades Single stopping device

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Execution: semi-automatic Swivelling range: 0 - 90 ° Max. saw blade diameter: 370 mm Saw blade size: central bore: 40 mm driving hole: 10 mm hole circle: 63 mm Speeds: number (steps): 4 from: 16 rpm up to: 92 rpm Voltage 50 Hz 3x: 380 Volt Power: 2.6 / 3 kW Overall dimensions machine: Length: 3600 mm Width: 1200 mm Height: 2000 mm

Key data: 145 , 320

Capacity round maximum diameter: 145 mm Angle degrees maximum: 320 Feeding length automatic feeder: 0 mm Diameter sawing blade: 470 mm Cutting 90°:     145Ø Cutting flat 90°:320 x 30 mm Circle blade size:470mm Power:           2,8 kW Length:          5.000 mm  Width:           1.600 mm  Height:          1.800 mm  Weight:          1.500 kg 

Capacity round maximum diameter: 125 mm Angle degrees maximum: 90 Feeding length automatic feeder: 0 mm Diameter sawing blade: 380 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Double circel blade Angle L / R Degrees  L + R Cutting capacity 90 ˚ Ø  125 mm blade dimensions  380 mm roller conveyor / push up / measuring 3000  Cutting speed M/min   2800 / 3800 M/min DIMENSIONS Length  4100 mm Width  1400 mm Height 1800 mm  

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drill ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

sawing cap rectangular: 400 x 200 mm sawing cap square: 280 x 280 mm sawing cap round: dia 300 mm Depth of throat: 400 mm Max height of workpiece: 280 mm Length of band saw: 3010 x 27 x 0,9 mm Weight: 530 kg

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Qty. 1 Second-hand sawing machine Sawing machine Mfc.: Kaltenbach Type: HDM 1431 Built: 2005 General description of HDM 1431 Can cut all types of profiles (quite thick profiles as well) with a straight or angled cut. Generally, angles are not cut with this saw, except for large sections by positioning the V against the bottom. Technical details: Profiles: Height: 50-400 mm Width: 50-1000 mm Cut at 90° min. length: 50 mm Cut at 90° max. length: 24200 mm Cut at 55° min. length: 3900 mm Cut at 45° min. length: 2900 mm Hard blade: Dia.: 1430 mm Thickness: 9.5 mm

Five - Axes CNC - controlled machining center with combined sawing and milling unit for machining sheet material made of marble, granite, ceramics and other hard materials by sawing, drilling and milling - brand new. Largest workpiece dimensions 3,500 x 1,900 mm Travel Z - axis (vertical) 350 mm Largest workpiece height 150 mm Combined sawand and milling unit with two axes - C - Axis 360° A - Axis (tilting range) 90° Saw blade diameter from 300 to 500 mm Largest cutter diameter 50 mm (crown drills and grinding tools larger) Saw and milling spindle drive power 11 kW Spindle speeds 600 to 6,000 rpm Hydraulically swivelling work table with pneumatically extendable rollers Dimensions (without safety enclosure according to CE) 5.18 x 2.85 m x H 2.5 m Weight 2,700 kg Facilities: - CNC control with TOUCH SCREEN and color graphics - Hot-dip galvanized base frame and t ...

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

Key data: 600 mm, 230 mm

Stock number: 3831 ALUMINUM SHORTCUT SAW Manufacturer: TRONZADORAS MG, Type: TL 600-90 Machine NO.: 220309, Year of manufacture: 2022 Specifications: Large sawing capacity 230 mm Ø Large sawing capacity 210 x 210 mm 4-ct. Large blade diameter 600 mm Blade speeds 3000 rpm Accessories: Automatic feed. Pusher Autopos 6 Pinon 6000 mm max. 40kg/m Chip suction MG 570 4Kw Length: 1300 mm + 6700 mm, height: 1660 mm, width: 813 mm, weight: 450 kg

Lifting, filing and sawing machine, filing trestle, planing machine, planer, stand filing trestle, filing machine -Manufacturer: VEB Ruhla, lifting, filing and sawing machine type SgHFe 230 -Table surface: Ø 400 mm, 4 sides swiveling approx. 15° -Projection: 230 mm -Stroke rate: infinitely variable: approx. 75 - 355 DH/min -Operating voltage: 380 volts -Dimensions: 720/650/H1570 mm -Weight: approx. 338 kg

Description: BENZ Single sided angle head MONO R Sawing and Snipping Unit Type of aggregate: Single sided angle head with reduced RPM type MONO R Product Line: Classic Line (grease lubrication) Tool outlet: 1x saw blade alignment Ø30 mm (fixation with flange by 2 pins Ø6 mm on pitch diameter 42 mm or by four M5-screws on pitch diameter 45/52 mm without using the flange) Weight 5.5 kg max. drive torque M2 25 Nm max. drive speed n2 8000 1/min Transmission ratio (n1:n2) 1:0.8 The price is only valid for aggregates with standard interface with HSK-F63 interface and the torque supports for the following machines: Biesse, Busellato, Felder, Hiteco, HOMAG, IMA, Masterwood, Reichenbacher, SCM 1 point, SCM 3 point, Weinig. Further torque supports on request. The unit can be delivered with different machine connections. After the purchase please let us know which machine connection / torque  ...

WEIBERT WJ-K315R Circular sawing machines Formatschiebetisch: 2700mm Engine power: 4 KW (5.5 HP), 400V, n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° Before scoring unit: With motor WJ-S315R-4KW 2.7 SPECIAL PRICE

Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. The machine  ...

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg

PLC – controlled high-performance precision cold-circuit sawing machine with loading magazine and unloading magazine of very high quality - equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of rod material – tubes and hollow profiles made of steel and stainless steel Saw blade dimensions up to a maximum of 315 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 12 mm to 80 mm tubes and hollow profiles - 12 mm to 40 mm solid material - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits material loss, saw blade speeds 20 to 130 rpm - optionally available with different saw blade speeds, controlled unloading unit for four different unloading positions - largest automatically unloadable sectio ...

specifications: - Roll diameter 420 mm - Projection 410 mm - maximum passage height 265 mm - Table size 600 x 600 mm - Table li. + re. swivel each 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Sawing bandwidth 3 - 16 mm - 8 Cutting speeds approx. 18 - 562 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space required approx. W 900 x H 1900 x D 1000 mm - E. foot button

This Elumatec SBZ 616/02 Sawing machine was manufactured in the year 2018 in Germany. It is equipped with a Elumatec control unit. The machine has a maximum cutting length of 6800 mm.

This KASTO SSB 260 VA Sawing machine was manufactured in the year 1998 in Germany. The machine disposes of an automatic feeding and a conveyor belt for saw blades. It has a saw blade length of 4115mm, a saw band width of 34 mm and a maximum diameter of 260 mm. It is in good conditions.

This OMP EURO 400 CMCNPRL Sawing Machine was built in the year 2015 in Italy. The machine has a blade diameter of 400 mm and a clamp max. span of 140 mm, and a lamp jaw height of 70 mm.

This ELUMATEC DG 104/02 E255 Sawing Machine was manufactured in 1996 in Germany. It has a max. saw blade of 2800 rpm, a max. power of 4000 W (each motor) and can operate with an inner tilt of 90-45 degrees. See photo gallery for more details. Contact us anytime for further questions!

This KASTO cut DU 4 Sawing machine was manufactured in the year 2010 in Germany. The machine has a Cutting speed of 20 to 110 m/min.

This MEP TIGER 370 CNC - LR Sawing machine was made in 2009 in Italy. It is equipped with a MEP CNC Evolution.

This Wagner WPB 340 A Sawing machine was manufactured in the year 1993.

This BEHRINGER EISELE HCS-90E Sawing machines machine was manufactured in 2014 in Germany. The machine has a cutting speed of 25 - 215 rpm. It is equipped with a material magazine of 6 meters.

This KASTO speed C 14 Sawing machine was manufactured in the year 2004 in Germany. It is equipped with a chip removal. Disposes of a signal lamp and a Hydraulic lift roller.

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

This KASTO tec A3 Sawing machine was manufactured in the year 2000 in Germany. It is a fully automatic band saw machine. It is equipped with a feed roller conveyor (non-driven) which has 3 side feed rollers.

plunge sawing machine

MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning

MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning

Code: 0030 Brand: MARIOTTINI Model: 800 - CE Standard Fret sawing machine - It can cut (of thickness) hard and ply wood , plastics and light allows ( copper, aluminium, brass, zinc, etc.) It is particularly suitable for carpentry works, not to mention handicraft inlay work, modelling and bricolage - CE Standard Lenght of working space covered by arm mm 800 Working surface mm 800 x 600 Working speed 1125 1230 rpm Stroke of the blade 40 mm Motor Hp 1 Max thickness mm 40 MOverall dimensions: mm 1350 x 600 x 1600 h

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...