Rubber processing machines used for sale (14)

Berstorff Rotocure AUMA 20-S Drum dia: 2000mm Drum width: 2600mm Sandvic Steelbelt Description attached!

machine measurements: ca. 1030 x 1110 x 1950 mmmachine weight: 800 kgpower capacity: ca. 2,8 kWCondition: usedSpecification: SiloStar 924 dosing system - used- For dosing liquid silicone LSR- LSR dosing with servo-hydraulic unit, servo motor 2.8 kW- Dosing with piston pumps- Uniform emptying of components A + B via proportional compensation cylinders- Variable mixing ratio- Touchscreen with visualised user interface- Containers: 200 litre drums- Operation via 10 inch touch display- Automatic mixing material pressure control with sensor directly on the mixing block- Pressure sensor for A + B- Circulation device A + B- Power connection: 380-480 VAC, 50/60 Hz (3P + PE), 16 A- Mixing head machine connection- Hose package 2x nylon DN 16 x 2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mesh belt for AUMA / Rotocure new and unused Length: 14100mm Width: 2250mm

machine measurements: 2.100 x 2.200 x 2.100 mmmachine weight: 2.000 kgpower capacity: 36 kWCondition: usedSpecification: cleaning and degreasing system FIRBIMATIC LOGICA 200V closed cleaning system for the cleaning of of metallic components with highly stabilised perchloroethylene - second-hand- Closed cleaning system for the cleaning of metallic components components with highly stabilised perchloroethylene.- PER-based cleaning and degreasing system Possible cleaning cycles: 1. pre-cleaning (spraying) 2. main cleaning (spray and flood cleaning) 3. rinsing (hosing down) 4. vapour degreasing 5. vacuum drying- All cleaning cycles are freely programmable.- Filling volumes: Tank 1: 170 litres Tank 2: 80 litres- Type of solvent: Perchloroethylene- Total connected load of motors: 9.65 kW- Installed e ...

Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!

Press force max.:: 3000 kNheating plates:: 600 x 630 mmelectrically heated:: °Cheating power:: kWpiston stroke:: 420 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: Press 600 x 630 mm, second-hand- clamping force: 300 tonnes (3,000 kN)- closing: from bottom to top- Heating platens: 2 electric platens, with new heating rods- Heating platen dimensions approx.: 600 x 630 mm- Distance between the heating platens approx.: 420 mm- New electric valves- AC machine output oil pump: 5.5 kW- New control cabinet with Siemens 7’ touch panel- PLC control system make Siemens S7-1200- New cabling- Frequency inverter made by Schneider- Light barriers in the front area,Overhauled in accordance with CE standard safety regulationsOperating instructions and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the sof ...

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

Press force max.:: 1600 kNheating plates:: 400 x 400 mmelectrically heated:: -- °Cheating power:: 9,92 kWpiston stroke:: 400 mmno. of stages:: 1 Condition: Used,Specification: Press 400 x 400 mm, second-hand steel frame construction- Clamping force: 160 tonnes- pressure force: 1600 kN- Operating pressure: 300 bar- Closing: from bottom to top- Heating platens: 2 electric platens- Heating power: 4.96 kW/platen- Heating platen dimensions: 400 x 400 mm- Specific pressing pressure: 1000 N/cm²- Distance between the heating platens: 500 mm- Piston stroke: 400 mm- Piston diameter: 260 mm- AC motor power: 7.5 kW- Pneumatic protective cover in the front area,- lifting device- Sliding table- Approx. dimensions: 1,760 x 1,150 mm- System height approx.: 2,470 mm- Weight appro ...

Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10

Press force max.:: 1.000 kNheating plates:: 480 x 520 mmelectrically heated:: °Cpiston stroke:: ca. 500 mmno. of stages:: 1 Condition: Used, overhauledSpecification: 4-column vulcanising press 480 x 520 mm, used- closing force: 100 t- closing: from top to bottom- heating plates: 2 electric plates- New heating platens- Dimensions of heating plates: 480 x 520 mm- Distance between heating platens approx.: 500 mm- AC motor: 5,5 kW- New electric valves- New control cabinet with Siemens 7 touch panel- SPS system Siemens S7-1200- Frequency converter make Schneider- New cabling- Light curtains in the front operating areaOverhauled according to CE standard safety regulationsOperating and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the  ...

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

machine measurements: 2.200 x 1.200 x 2.260 mmmachine weight: 1.000 kgpower capacity: -- kWCondition: usedSpecification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations- year of construction approx.: 2011 - pick-up stations: 16- measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm)- Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day- Technical application: surface defect and crack detection on O-rings- Sorting function: Good, Bad, Undefined- Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm-  ...

machine measurements: 1500 x 2400 x 1150 mmmachine weight: -- kgpower capacity: 12 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 3.000 mmmachine weight: -- kgpower capacity: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.