roland 705 used for sale

Inv. Num. : 7059 Type: MT 40/1500 Producer: MAS Created: 1996 Parameters: Control system: FAGOR Max. turning length: 1500 mm Maximum turning diameter over bed: 540 mm Maximum turning diameter over support: 305 mm Spindle speeds: 3000 1/min Spindle bore: 85 mm Weight: 2970 kg Equipment: Rotating cutter head Additional dovetails behind the cutter head for additional equipment

sheet width: 3050 mm plate thickness: 6,00 mm distance between columns: mm cutting angle: 0,5 - 3,0 ° drive motor: 11 kW down holder: 18 Stück total power requirement: kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: m • Automatic cutting angle adjustment • Automatic cutting gap adjustment • Cutting line lighting • Support arms • Knife with 4 cutting edges • Cutting length limitation • CNC back gauge 705mm adjustment range 705 mm • Angle stop • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Installation and dimensions: According to the plan «Cave 3» Consists of: 34Tanks with 4800 - 9200 liters 28 tanks with 7050 - 11500 liters 22Tanks with 11000 - 21000 liters 5 tanks with 12500 – 20900 liters - Material: Steel, lined (good condition) - Rectangular, standing on support base - Depth: 1600 / 1650 / 2950 / 3250mm - Width: 1100 - 2600 mm - Tank height: 3100 mm - Total height: 3600 mm (with tank terminal) - Ground clearance: 400 mm - Rectangular manhole 320 x 420 mm - Residual drain tank gate NW 50 - Clear drain tank gate valve DN 50 - Level indicator - Kosthahn - Dome DN 200 - Connection for nitrogen gas superposition - Crane eyelets - The whole tank farm is in good condition

Inv. Num. : 6193 Type: CO 3030 L20 Producer: TRUMPF Created: 2010 Parameters: Control system: Siemens Laser ON: 70501 Beam ON: 27564 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminum): 25 mm Equipment: ROTOLAS According to GO. Availability 2Q/2023.

General SKU422U1338 LocationBarneveld MakeAzo TypeE650 A22 No.371017 Year of construction11-2001 Main Features MaterialStainless steel Motor1.5 KW Length650 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesDia. 200x650 mm Inlet225 x 225 mm Outlet600 x 300 mm With inspection hatchcheck Motor1,5 kW, 400 volt, 705 rpm Speed705 rpm Air purged glandscheck With sieve cagecheck Sieve perforation3 x 3 mm MaterialStainless steel 1.4301 (304) Information Total height1,05 m Weight300 kg CEcheck Floor space1,85 x 1,00 m Extra SpecificationsWith feeding screw conveyor. screw Dia. 200 mm, length 1060 mm, motor: 0,75 kW, 81 rpm, New arrivalsRotating sievesAZONew arrivalsSieves > Rotating sievesBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

General SKU422U1435 LocationBarneveld MakeSiebtechnik Typeperflux 501 No.70557 Year of construction2006 Main Features MaterialStainless steel Surface0.75 m2 Sizes diameter500 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,75m² Number of sieve decks:1 Sieve sizesDia. 500 mm InletDia. 500 mm OutletDia. 500 mm Drive vibro motorcheck Motor0,16 kW, 400Volt. Sieve perforation3,15 mm With extra sieve decks1x 3,15 mm MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Total height0,6 m Weight100 kg Floor space1x0,6 mVibro sievesSiebtechnikSieves > Vibro sievesBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

We offer 4 system rooms with L-shaped ceiling Basic dimensions: 
 Room 1: 2,750 m x 5,015 m; H = 2,880 mm, left H = 2,705 mm, Room 2: 9,300 m x 4,910 m; H = 2,880 mm, left H = 2,705 mm, 
 Room 3: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm, Room 4: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm. The walls are made of double-skinned, powder-coated sheet steel filled with mineral wool, equipped with 6 mm float glass. They offer a sound insulation of approx. 25 dB at 1,000 Hz and are also partly equipped with air slots for an air passage of 300 cubic meters/hour. The surface is powder-coated. The ceiling is a sheet steel cassette ceiling (distance DTR = approx. 1,018 mm) made of perforated cassettes, surface powder-coated, grid 625 x 625 mm, cassettes clamped, profile rails not visible. Thermal and acoustic insulation by 35 mm mineral wool, highly compacted, alu ...

Machine : Cutter Heads Make : Coromant, Walter,.. The cutter heads are used and partly as good as new. φ 400 , Coromant, T-Max , 26 teeth, No. 705420, cassettes 265.2-828, as good as new, none Signs of wear, € 300,- A- Ø 100 2 pcs. Sandvik, €150,- C- Ø 500 1 pc. WALTER OO F244 , as good as new € 200,- D- Ø 400 1 pc. WALTER RH F244 gebr. good € 200,- 1 pc. WALTER OP F244 € 200,- slide. 100mm Sandvik Price : VHB or against bid ! Maybe it can also be used as decoration. Entrance area outdoor area !

travel -x axis: 705 mm travel -y axis: 425 mm travel -z axis: 610 mm control: Heidenhain - iTNC 530 turning speed range: 50 - 20.000 U/min numbers of positions in the tool changer: 32 tool taper: SK30 Universal Milling Machine | FEHLMANN - Picomax 90-M Scope of delivery: - extensive package of tools - swivel rotary table (4th + 5th axis) The machine is in a well-maintained condition. Please refer to the offer for further technical details. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Grenier - Charvet Model: E 15 Year: 1973 ( Compliance file 2001) Type : High viscosity paste mixer   Motor power : 15 CV - 11 KW Speed variation : mechanical Previous use : Paint 220 L tank Mixing tool: ? 705 mm butterfly / cloverleaf type Tank clamping: pneumatic   Vertical movement: hydraulic power unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm

Manufacturer: Grenier ? Charvet Model: E 15 Year: 1973 ( Compliance file 2001) Type : High viscosity paste mixer   Motor power : 15 CV ? 11 KW Speed variation : mechanical Previous use : Paint 220 L tank Mixing tool: ? 705 mm butterfly / cloverleaf type Tank clamping: pneumatic   Vertical movement: hydraulic power unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm

Description: • Dovetailer, dovetailing machine • Max. Workpiece width approx. 480 mm • Workpiece length from 200 mm up to 1500 mm • Drawer front thickness from 7 mm up to 60 mm • Drawer side thickness from 10 mm up to 30 mm • Milling template with 20 notches • Distance between notches approx. 25 mm • Milling motor working vertically from bellow • Motor power 1.10 KW-2820 rpm • 2 horizontal pneumatic clamps and 2 vertical ones weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 780 x 1,390 mm

Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  , serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, pro ...

CNC assembly line Brand: Alberti Type: BMF new machine Equipment for automatic insertion of fittings, plinth parts, drawer runners and many more. Can be equipped with automatic screwing devices, gluing indications and press-in tools. Plant expandable with many possible hardware feeding stations. This Alberti line can be customized according to your specifications. Machine bed made of welded steel tube structure, the upper part is made of aluminum frame. Components of the line: - Feeding - Processing zone with transport rollers - destacking Work table: - Driven PVC rollers at the inlet. Usable length: 2500mm, usable width: 840mm - Reference table with PVC rollers Usable length: 2500mm, working height: 840mm, adjustable +/- 30mm - Driven PVC rollers at the outlet Usable length: 2500mm, usable width: 840mm - Vertical workpiece clamps, autom. adjusted to wor ...

CONTROLS   PLC SIEMENS S5 PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 400 to   nominal work capacity: 32 kNm PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 990 mm   thickness of bolster plate: 200 mm   height above floor level: 800 mm   opening in bed (left-right): 2250 mm   opening in bed (front-back): 280 mm SLIDE   slide force: 400 to   table surface (left-right): 2600 mm   table surface (front-bac ...

82 MW Rolls Royce Trent 60 - NATURAL GAS COMBINED CYCLE POWER PLANT -Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; Manufactured in 2016, delivered in August 2017 65.9 MW(e) ISO 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas Cold start to full power in under 10minutes 50Hz, but easily convertible to 60Hz Engine still preserved in original shipping container An aero derivative gas turbine -Siemens Steam Turbine Generator SST-300 C2S/C160; Manufactured in 2016 Output 15.75MW ISO Speed 7059 RPM Admission Steam Temperature 400 Degrees C Admission Steam Pressure 30 bara Exhaust Pressure 0.07 bara Rotation- Right

Complete reconditioned Caterpillar C9 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa. com, überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 4ZF: 1660270 1660273 1687966-7967 1693788-1693791 1716598 1747515-7516 1747518-7519 1747521-7522 1765509 1769269 1771414-1771420 1794952 1794954 1794956 1794958 1870470-0471 1910127 1944160-4161 2037058 2051484 2083027 2090527-0528 2115020 2155528 2164798 2164800-2164804 2336935 2342917 2354129 2370283 2420067-1676 2421677 2429110 2538366-8367 2545748-2545753 2555205 2641329-1330 2671315-1316 2856123 2901143-2901145, 7AZ: 1693791 1716598 1870470 2083027 2115020 2342917 2354129 2370283 2545750 2545752, CLJ: 1968493 2010333 ...

Description: APACHE - Flooding / Impregnation / Coating System Model APACHE 5 are especially suitable for coating boards, glulam, window components, glue-laminated beams and timber construction elements with larger cross-sections such as glue-laminated beams, structural timber.  , ,  , Flood coating machine with (5) brushes  , , , , , , , Machining width: 300 mm  , , , , , , , Machining height: 200 mm  , , , , , , , Workpiece length min 1000 mm  , , , , , , , Feed speed, FU, frequency controlled  , , , , , , , Number of driven transport rollers  , , , , , , , Ø of the transport rollers  , , , , , , , Brush arrangement: 1. top, 2. bottom, 3. right, 4. left 5.bottom  , ...

:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mm turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm control:Siemens/Fanuc/Fagor center height over bed:705|805|905 mm width of cross cariage:600 mm bed width:1370 mm spindle bore:200 mm spindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mm tailstock quill diameter:300 mm tailstock quill adjustment:250 mm taper in tailstock:7 MK tailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mm travel - z:= Spitzenweite mm servo motor X-axis:4 kw servo motor Z-axis:7 kw rapid power traverse in X-and Z direction:5 m/min hydraulic motor:1,4 (ab 9m: 3,6) kW coolant pump drive:15 bar weight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20 ...

bore capacity in steel (diameter):5 - 30 mm x-travel:450 mm y-travel:380 mm total power requirement:1,4 / 2,2 kW weight of the machine ca.:1.100 kg dimensions of the machine ca.:1.000 x 1.400 x 2.900 mm gear box:85 - 2.000 U/min spindle diameter:72 mm bore depth:700 mm throat:300 mm spindle taper MT:3 T-slots:3 x 16/25 mm table-size:700 x 300 mm spindle turning speed range:85/170/250/355/475/710/1000/2000 U/min motor speeds::705/1425 Year:ca. 1975