roland 705 used for sale

Three-phase electric motor VEM KMR 100 S8-4 ( KMR100S8-4 ) 0.9 / 1.5 kW 705 / 1415 rpm 380 V IP44 shaft diameter: Ø 28 mm two speeds ! used, checked ! Dimensions: 370 x 195 x 230 mm

Three-phase electric motor with brake VEM BPRE 100 S8-4 ( BPRE100S8-4 ) 0.9 / 1.5 kW 705 / 1415 rpm 380 V IP44 shaft diameter: Ø 28 mm two speeds ! New ! Dimensions: 410 x 195 x 240 mm

Three-phase electric motor prepared for mounting an electric brake VEM K210 112 M 8 U DSD FNS-K/WDS/8540 DIN EN 60034-1 1,5 kW 705 rpm 230 / 400 V 3AC IP 54 shaft diameter: Ø 28 mm shaft diameter(for brake): Ø 10 / 20 mm Flange diameter (for brake): Ø 152 mm New ! Dimensions: 380 x 225 x 270 mm

Sliding door cabinet, steel cabinet, tool cabinet PAGUS 1425 x 705 x 1365 mm ( width x depth x height ) Internal dimensions: 1420 x 630 x 1230 mm ( width x depth x height ) 2 Sliding doors: 720 x 1225 mm ( width x height ) 5 x Shelf: 1420 x 630 mm (width x depth, height adjustable, 45 mm increments) lockable, without lock ! used, tested ! Dimensions ( cabinet ): 1200 x 415 x 1090 mm

Three-phase motor, electric motor -Power: 7.3/10.5 kW -Speed: 705/1425 rpm -Shaft: Ø 45 mm -Construction: B3 -Protection class: tropical insulation -Dimensions: 650/480/H430 mm -Weight: 180 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 705 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 460/257/H310 mm -Weight: 50 kg

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 705 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 440/225/H290 mm -Weight: 44 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft: Ø 14 mm -Flange: Ø 200 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 265/200/H220 mm -Weight: 16 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available -Dimensions: 290/170/H205 mm -Weight: 13 kg

Electric motor, three-phase motor with 2 speeds -Handover in the current condition as seen -Foot damaged, see photo -Power: 3.5/6.0 kW -Speed: 705/1410 rpm - Shaft: Ø 38 mm -Construction: B35 -pole-changing -Protection class: IP 55 -Number: 1 piece available -Dimensions: 480/330/H300 mm -Weight: 50kg

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Engel injection moulding machine Type: 7050/1500 duo, with Angel ERC 84 2 CL robot control: CC100 year: 2000 Clamping unit Clamping force t: 1500 opening stroke mm: 2350 Holm dimension mm: 1530 x 1275 min/max height mm: 700/1465 Plate size: 2340 x 2040 injection unit Screw diameter mm: Gr 90 injection weight: 2900 Injection volume cm 3: 573 spray pressure bar: 2300 Dimensions and weights Dimensions Lxwxh m: 12 x 3.7 x 2.9 machine weight kg: 63,000/30,000 Miscellaneous 5 core moves 5 specialist cascade tire. Valve gate Angel ERC 84 2 CL robot

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 003 H750 -Voltage: 24V/335Hz -Dimensions: 120/90/H75 mm -Weight: 0.3 kg

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 012 H750 -Voltage: 24V/335Hz -Dimensions: 115/90/H60 mm -Weight: 0.3 kg

Clamping angle, clamping aid -Clamping angle for: workpiece clamping -Dimensions: 705/605/H710 mm -Wall thickness: 45 mm -Weight: 303 kg

Description Wrapping machine

Knife for slicing machine WEBER CCS 304,305,402,404,405,602,604 diameter 460 mm 4 holes with a diameter of 20 mm center hole 48 mm weight 5,24 kg Catalog number : 70505008 10094 Clamping disc waga 0,46 kg Catalog number : 70504837 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.3 m -Roll width: 705 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Dimensions: 3300/760/H295 mm -Weight: 180 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 705 x 490 mm, height 695 mm -Wall thickness: 25 mm -Clamping grooves: 70 x 20 mm -Dimensions: 705/490/H695 mm -Weight: 187 kg

Clamping plate, welding table, welding table, straightening plate -Steel table -Length: 2200 mm -Width: 1255 mm -Height: 705 mm -Panel thickness: 69 mm -Weight: 1396 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 705 mm -Thickness: 25mm -Recess: 270 mm -Short cone diameter: 192/217 mm -Hole circle: Ø mm -Weight: 71 kg

Automatic system for packaging with heat-shrinkable plastic film. the aforementioned system consists of: 1) feeding belt complete with photocell and work surface 2) n.2 manual feeding modules with work surfaces 3) automatic wrapping machine with biconical wrapping machine 4) printed film group with central branding 5) hole fixture(European) 6) longitudinal perforator for facilitated opening 7) longitudinal welder with tilting wire 8) ionizing welder 9) shrinkage tunnel 10) belt with by-pass 11) collection belt 12) rotatable stacker Working hours 293 as per the attached photo.

thickness of jaw: 160 mm : 50 mm clamping width: 180 mm weight: 37 kg dimensions of the machine ca.: 450 x 240 x 130 mm mechanical vice in great condition - with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm : 50 mm clamping width: 180 mm weight: 37 kg dimensions of the machine ca.: 450 x 240 x 130 mm mechanical vice in great condition - with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Load capacity: 1300kg Approx. Onsite Dimension. (l x w x h): 700 x 1,100 x 300 mm, weight approx.: 50 kg

Diesel engine, type OM 402, vehicle ID no. IMO402900 00 130180,.

UniMaster STS, die Platz sparende Lösung mit stehendem Behälter! Serienmäßig mit allen Armaturen, wie Elektromagnetventil oder Druckschalter mit Entlastungsventil für vollautomatischen Betrieb, Motorschutz, Sicherheitsventil, Manometer, Rückschlagventil, Kondenswasser-Ablasshahn und Absperrhahn Keilriemengetriebenes 2-Zylinder-Aggregat mit zweistufiger Verdichtung für 10 bar Druck erhöht die Leistung und sichert einen hohen Wirkungsgrad. Zwischen- und Nachkühler sorgen für eine rasche Abkühlung der erzeugten Druckluft Großes Ventilatorschwungrad für optimale Kühlung Technische Daten: - Druck 10 bar - Ansaugleistung 660 l/min - eff. Liefermenge 520 l/min - Antriebsleistung 4,0 kW - Drehzahl 1025 Upm. - Behältervolumen 270 l - Geräusch 78 db(A) - Abmessungen L=750, B=705, H=1800 mm - Gewicht 170 kg

UniMaster STS, the space-saving solution with a standing container! Standard with all fittings, such as an electromagnetic valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensation tap and shut-off valve V-cylinder driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency. Intermediate and aftercoolers ensure a rapid cooling of the generated compressed air Large fan flywheel for optimal cooling With refrigeration dryer and bypass line With complete module Öwadry, consisting of: refrigeration dryer, pre-filter and oil-water separator (only for DKS version) Safety tub optionally available Technical data: - Pressure 10 bar - intake capacity 660 l/min - eff. Delivery quantity 520 l/min - drive power 4.0 kW - speed 1025 rpm. - Container vol ...

Arburg Injection Moulding Machine Type: 520 C 2000-675 Control: Selogica Built: 1999 Closing unit Clamping force t: 220 Opening path mm: 900 Holm size mm: 520 x 520 Installation height min/max mm: 250 Plate size: 715 x 715 Spraying unit Screw diameter mm: 60 Spray weight gr: 427 Spray volume cm3: 508 Spray pressure bar: 1400 Dimensions and weights Dimensions LxWxH m: 5.6 x 1.7 x 2.2 Machine Weight Kg: 7050 Other - Clamping force increased to 220 KN - resistant plastification unit - 2x core pull - Robotinterface Euromap12

Description Brand Bomag Fayat Model 1300/30 ID 7051 Colour galben Fuel Diesel Power 275 CP Working hours 2000 ore Location Oradea Cold milling machine Bomag, 1300/30 Model, YOM 2011, only 960 Hours, 1.300mm milling width, 320mm milling depth, 23.800kg operating weight, CE marked, 275hp engine, weather-protection roof, high pressure cleaner, water filling system, Chassis 821836320011, Very good technical condition Price : 110.000 Euro+ VAT ex works Oradea Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul ...

Krauss Maffei injection moulding machine Type: KM 800 / 4350 BM, with Neureder robot control: MC 3 year: 1993 Clamping unit Clamping force t 800 Gap mm: 1245 Holm dimension mm: 1000 x 900 min/max height mm: 705 /. Plate size: 990 x 1380 injection unit Screw diameter mm: 85 Injection weight gr: 1965 Injection volume cm m³: 1820 Spray pressure bar: 2185 Dimensions and weights Machine weight kg: 38,000/12,000 Other 2 core pull, Neureder robot system

FRIGOSCANDIA GYROCOMPACT GC42-08-30-06-NS-CCR Product number:M19-5013 Cooling capacity:100 kW Number of fans:1 Fin spacing:25mm - 6mm mm Defrost:Hot gas Refrigerant:NH3 Refrigerant Content:390 kg Voltage:400 Volt Power consumption:25 kW Motor power:30 kW Dimensions:7050 x 2620 x 3900 mm Weight:6500 kg Year:1996 Number in stock:1 piece(s) Price:Quotation request A nice compact Frigoscandia spiral freezer. Model GC 42-08-30-06-NS-NHT-CCR with a product capacity of maximum 1.000 kg/h (based on green peas). In/outfeed configuration is North/South. Infeed height = 560mm, outfeed height = 2540mm. Belt rotation is Counter Clock Wise, belt width gross = 420mm, belt width net = 375mm, max product height = 65mm, numbers of tiers = 30 tiers. Belt mesh width = 6mm. This Frigoscandia spiral freezer has been well maintained and is in top condition. The freezer is executed with a S. ...

- agregat card ARB 425 - analog output card ARB ARB 390 - output card ARB 409 - base board card SN. 193170 + SN 143537 ARB 729 + SN 173858 - panel card ARB 256, ARB 414 - control card ARB 692 - CPU card ARB 726, ARB 251 - diagnose card ARB 389 - disk controller card ARB 500 - input card ARB 254, ARB 705 - injection control card ARB 460, ARB 328, - elektronic card ARB 252, ARB 255, ARB 380 - inside press card ARB 259 - base board card ARB 372, ARB 523 - motor control card ARB 307, ARB 440 - 24V card ARB 381 - proporcional valve card 0 811 405 047, ARB 330 - memo card ARB 339, ARB 508, ARB 526 - heating control card ARB 365, ARB 404, ARB 530 ARB 640, ARB 730, yPIII - distributor card ARB 511, ARB 534, ARB 538, ARB 539 - video card ARB 258, ARB 535 - amplifier card, modul card - rectifier - transducer card ARB 302, ARB 399, ARB 733 - power supply Deutronic ED-60 -  ...

Internal gear pump Manufacturer Truninger Type QT52-050/42-025/R BIZ HPN 705984 Series 257848 Used

Creo Lotem 800 II Quantum 830 nm, Thermal Manufacturer: Creo Model: Lotem 800 Year: 2006 8 page format Plate size min.: 381 x 318 mm Plate size max.: 1050 x 705 mm V speed: 22-25 plates/hour Resolution: up to 3556 dpi Approximate number of plates produced: 109950 Bacher Control 2000 Punch Installed on IBM Server Excellent condition Koadak Mercury 125 PlateProcessor/Stacker

This electrically driven sinusoidal table has an incremental angle measuring device (Heidenhain RON 705). -Sinusoidal table for workpiece clamping -Swivel range 0 - 110° -Clamping surface 800 x 600 mm -Groove width 22 mm -Groove spacing 100 mm -Number of grooves:6 pieces -Dimensions: Length: 840 mm Width: 760 mm Height: 220 mm Clamping angle, clamping angle, clamping tower, clamping device, About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Rounds: 105 mm Squares: 390 mm Flats: 120 mm Flats on edge: 15 mm Angles: 10 mm (1) horizontal / (2) vertical: 1   Shaft Ø:          105mm Number of rolls:  3 Stroke X-Axis:    390mm Resistance moment:3000 NmCM³ Capacity flat:    120 x 15 x R-1200mm Capacity Tube:    114 x 6,3 x R-1200Ø x mm Capacity bar:     80 x 80 x R-1400mm Capacity T-Profile:100 x 100 x 10 x R-1600mm Working speed:    1 -16.000mm/min. Length:           2100mm Width:            1860mm Height:           1420mm Weight:           2300kg

XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Te Koop: Vlinderklep van FLX. Butterfly valve. Type: wafer DN125, PN 16 EPDM

Te Koop: vlinderklep handbediend. Wouter Witzel butterfly valve; Type: EVFS DN150 PN16 EPDM.

Te Koop: JLX vlinderkleppen handbediend. Butterfly valve. Wafer. Type DN 250 Pn16 EPDM

Capacity: 200 t Stroke: 900 mm Distance column/center (Throat): 680 mm Table length: 1450 mm Table width: 850 mm Eccentric press SANGIACOMO - T 200 FPR 7055 = Mach4metal Capacity Kg:  200000 Table Length: 1450mm Table Width:  850mm Hole in table:240mm Working height:960mm Ram size:     900 x 680mm Throat:       435mm Stroke:       19 - 230mm Ram adjustment:110mm Strokes:      45Min. Length:       2360mm Width:        1780mm Height:       3865mm Weight:       19000kg

Te Koop: Stainless steel butterfly valve Handbediend. 6 "las las karambir zonder."

Flat waffle machine Haas SWAK 72 including arch cooler Manufacturer: HAAS Model: SWAK 72 Machine No.: 11351 Dimensions baking plate: 460 mm x 290 mm Number of baking plates: 72 Weight Net: 17,000 kg Length: 11,705 mm Height machine head: 2,030 mm Height machine body: 1,600 mm Machine is currently still in production and is sold together with an archcooler. Hebenstreit/Haas/Danger

Following Separator available for sale. Make: ALFA LAVAL Type: LOPX 705 SFD 30 Serial Number: 4086702, 4087320 Year: 1996 Bowl Speed: 7540rpm Motor Power: 1800rpm No. of Phase: 3 KW: 4 HZ: 60 Made in Spain