roland 705 used for sale

Number of working hours: 7050 h output: 123 kw power fuel: Diesel diameter of tires: 540/65R30 F size of tire: 650/65R42 : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Edelmann Model: Roland Practica 00, no plus version Year: 1997 Status: very good, well-kept condition -super register, rollers in order, 2nd used roller set available, application rollers with lateral friction -Powder device -new cylinder gripper pad made by the mechanic -Alcohol film dampening unit with circulation cooling Prints: approx. 5 million prints (no total counter available) -Register punch and mounting film in addition, all manuals and setting instructions available -Small format device - at ground level -Superblue delivery drum Delivery from December 21st, 2020, collection by January 15th, 21st at the latest Price: on request

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Ordering no: RE002 TECHNICAL DATA main saw diameter 300-550mm Height of the main saw adjustment vertically for a saw 0300 0-75mm for a saw ⌀350 15-100mm for a saw ⌀400 40-125mm for a saw ⌀450 73-150mm for a saw ⌀500 90-175mm for ⌀550 saw 120-200mm The height of the main saw adjustment at an angle of 45 ° for a saw ⌀300 0-50mm for a saw ⌀350 10-70mm for a saw ⌀400 28-85mm for a saw ⌀450 50-105mm for a saw ⌀500 63-122mm for ⌀550 saw 85-140mm Saw blade tilt 0-45° / (optional) 0-46 ° Length of sawing with an auxiliary table with the strip at the back of the table for a movable table 250 = 2500mm with a strip at the back of the table for a movable table 300 = 3000mm with the strip at the back of the table for a movable table 320 = 3200mm with the strip at the back of the table for a movable table 390 = 3700mm Sawing width using a bumper on an au ...

pressure:100 t table length:1280 mm table width:900 mm stroke max.:1100 mm dimensions:2100 x 3800 x 3900 mm Approx. weight (w/o operational materials):11 t Engine Output:9,5 kW pre-running speed:48 mm/sec Return speed:44 mm/sec Oil Tank Capacity:140 l distance between columns:1150 mm distance table/ram:1035 mm Table height above ground level:630 mm ram surface:1000 x 1200 mm column travel -side:705 mm workpiece weight:max. 7 t Plum:max. 3,5 t Press speed:8 mm/sec

Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm

CNC milling machine DECKEL type FP 3 A Fabr. No. 2206 - 0325 Year of construction 1980 CNC line control GRUNDIG CNC 2101 Travel X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle holder SK 40 Pinol stroke 100 mm Spindle speed 25 - 2500 rpm. 21 steps Feed speed 5 - 500 mm/min. infinitely variable rapid traverse speed 1200 mm /min. Motor power Spindle drive 2 / 4 kW pole switchable Mains connection 380 Volt, 50 Hz - CNC line control GRUNDIG CNC 2101 - mechanical handwheels for all three axes - Universal swivel-tilt-turntable - Hydro-mechanical tool clamping - Coolant device in the machine foot - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement L x W x H 1800 x 1700 x 1950 mm Weight approx. 2000 kg good condition; used

ADVANTAGES The price applies to the model - 6 axes - programmable tilt and lifting of the main saw, height and left / right position of the scoring unit, longitudinal ruler, transverse ruler - 7 inch touch panel - new machine - CE certificate - warranty from the manufacturer - REMA - professional - Polish production - 6kW main engine TECHNICAL DATA - main saw diameter 300-550mm - Height of the main saw vertical adjustment - for a saw ⌀300 0-75mm - for a saw ⌀350 15-100mm - for a saw ⌀400 40-125mm - for a saw ⌀450 73-150mm - for a saw ⌀500 90-175mm - for a saw ⌀550 120-200mm - The height of the main saw adjustment at an angle of 45 ° - for a saw ⌀300 0-50mm - for a saw ⌀350 10-70mm - for a saw ⌀400 28-85mm - for a saw ⌀450 50-105mm - for a saw ⌀500 63-122mm - for a saw ⌀550 85-140mm - Saw blade tilt 0-45 ° / (optional) 0-46 ° - L ...

Injection Pump Diesel Pump Stanadyne A3 DB4429-6101 JCB 320/0674 Condition: unused, there may be traces of storage Voltage: 14V Current: 95A Manufacturer: Mahle Part Number: 11 204 215 JCB Number: 320 08719 Reference: 11.204.467 , IA1484, AAK5840 , MG23, 11.204.893, AAK5881, 11.204.215, AAK5820, 11204467, 11204893, 11204215, 320/08648, 320/08649, 320/08719, 12786, 32008648, 32008649, 32008719, 705516095, 4400cc JCB 444TA1 Engine JCB Agrar Agri Tractor, 524-50, 526-56, 527-55, 531-70, 535-95-AGRI 536-60, 2CX 3CX/PLUS/CLL 4CN 4CX 225T 444, G66 QX 526-56 527-58 926 2WD/4WD 930 940 TCA74, 225 226 T 260 EcoMAX TCAE-55; T4F; 55kW, Tier 3 4 320T 325 T 330 TN 220 Agri TM 180, VM 535-95 540-140 540-200 VM115PD/HD/HPD, VM137 VTM860 527-55-WM Excavator Loader Tractor, 416HT 416S-AGRI PL1105 448 PL185 PL195 PT1120 PT18,

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: / mm Steady rest 70 kg Underside approx. 440 mm Approx. 260 mm Center height approx. 350 mm Height approx. 705 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stand 2250x1000mm/ trusses 2705mm/ shelf load 3,30 to Technical data for the pallet racking system: Shelving system: Duwic | Cornix Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 25,345 mm Number of fields / row of shelves: 09 pcs á 2,705 mm Number of levels plus floor level: 02 pcs. The scope of delivery includes: 10x pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,250 mm high 1,000 mm deep 36x pallet rack traverse, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Agraffe: 3 HK (hook) Clear width: 2,705 mm max. load per pair of trusses 3,300 kg at the same time. distributed load 72x locking pins, used Version: complete. galvanized To secure ...

windshield, windshield -Manufacturer: Scania, windshield windshield -Order No.: 02581 99-003 -Dimension: 1660/705/ thickness 7 mm -Weight: 16kg -Transport dimension: 1660/785/H390 mm

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Table length: 5300 mm Table width: 1000 mm Longitudinal X: 4000 mm Cross Y: 1000 mm Vertical Z: 1700 mm Positions ATC: 0   CNC Brand: Fidia CNC Model: Fidia M2 Block bed 5300 x 1000 mm Automatic head Sk-50 with 30 kW and 4000 Rpm Extra spindel (E28)  HSK63 with 15 kW and 10.000 Rpm Electro spindel Jaeger Sk40 with1.8 kW and 50.000 Rpm Package with tools ( 25 pieces) Optional MECOF Box tables and MECOF Angle plates incl. chip conveyor incl. coolant system X-Axis:               4000mm Y-Axis:               1000mm Z-Axis:               1700mm Table load:           8000 Power on spindle:     30kW Spindle speeds:       4000Rpm Millinghead auto-index:2.5 x 2.5° Working hours:  ...

CTP-Mitsubishi - DPX 460 – Plate platesetter with Rip-Mate PC Year of construction: ca. 2007 incl. software and accessories incl. originally packaged role films For the production of ready-to-print stamped polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x stock rolls 1x integrated register punch for PM52 autoplate

Cooling capacity: 787 kW Year of manufacture: 2005 Refrigerant circuit: 2 pcs. Type of refrigerant: R134A Compressors: 2 pcs. York (screw) Number of fans: 10 pcs. Dimensions: 6.50 x 2.26 x 2.50+0.06 m Weight: 7056 kg Condition: excellent Product quantity: 1 pc.

Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.

Drilling capacity: 10000 mm Drilling depth: 10000 mm Spindle taper: 290   Number of heads: 1   CNC Brand: Siemens CNC Model: Siemens Simatic panel Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Max. drill Ø steel:290mm Drilling depth:    10.000mm X - Travel:        10.000mm Length:            25000mm Width:             2000mm Height:            2000mm Weight:            30000kg

Bitzer compressor unit Type: 3 x HSK 8571-140-40P Volume: 3 x 410 m3 Cooling capacity for R404A: 860 kW at -5°C/40°C, 705 kW at -10°C/40°C Cooling capacity for R134A: 540 kW at -5°C/40°C, 440 kW at -10°C/40°C Dimensions: 4100 x 1400 x 2500 mm Reference number: Z25 Pieces in stock: 1 Condition: Used

Machine Details Warehouse number 1105-03698 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 15 K S 5 AXIS Year of construction 2001 Control type CNC Control HEIDENHAIN TMC 530 Storage location FRANCE Country of origin france Delivery time ready for shipment Freight base EX WORK Price Technical details x-travel 550 mm y-travel 400 mm z-travel 425 mm Control HEIDENHAIN TMC 530 Table clamping surface 600 X 350 mm Tool holder ISO SK 40 Spindle speeds - infinitely variable 20 - 12,000 rpm Feed infinitely variable 0 - 60,000 mm/min Rapid traverse 60 m/min Feed force X/Y axis 5,000 N Feed force Z-axis 10,000 N Tool magazine: 20 Tool diameter max. 65 mm Tool diameter with 2 free spaces 150 mm Tool length - max. 220 mm Spindle diameter in the vord. Bearing 70 mm Torque at the spindle max. 180 Nm Distance spindle/table 280 - 705 mm Distance spindle/ ...

Technical data for the mezzanine support: Manufacturer: Stow Included in delivery: 01x mezzanine support double-sided, used Surface: Ral 7001 silver-grey Cross-section: 150x150x6.0 mm S235 Base plates: 400x400x40 mm Length square tube: approx. 4,665 mm Length of square tube incl. base plate: approx. 4,705 mm Total height: approx. 4,750 mm Weight: approx. 180 kg | Pcs.

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

Salvagnini P4-1812 + HTP 2015 + R51 CNC Plate Bending Machine/CNC Folding Machine  Technical Data: Maximum Edge Length: 1850mm Maximum Edge Height: 127mm Maximum blank thickness at 400N/mm²: 2.0 mm (standard version) Maximum angle : +/- 135° (depending on tool) Maximum diagonal of the board and panel: 2150 mm Maximum length of the board : 1995 mm Maximum width of the board and panel; 1500 mm Minimum notching distance on the long side: 265 mm Working height: 1090 mm Compressed air consumption at 6 bar: approx. 2 l/min Cooling water requirement: approx. 2 m³/h Cooling water inlet temperature: max. 20 °C Mains voltage 400V 30 KW Mass without oil filling: approx. 16,000 kg Hydraulic oil filling : approx. 600 l Sound pressure level at Bediernerplatz: 80 dB(A) Area requirement LxWxH: 7055 x 6845 x 2500 mm More items in other sizes - new and used - can be found in ou ...

Bosch DM 4K 9301-D 1070083676-111 Specifications: Version: V0.00.4 670V-705V DC Original price: 6850,-€ Item condition: Used, in perfect condition There may be slight deviations in appearance and revision status, as several articles are available.

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

As good as new, unused Contact grill SILEX Type S-021 In very good condition. Stored for years as a back-up in a restaurant - therefore unused New price approx. 4.500,- Function flawlessly Technically tested on request with new UVV Execution: Plate Type: Smooth Material: Stainless Steel Grill plate made of: aluminium-stainless steel Product code: S-021 Manufacturer serial number: 70579 Weight: 35 kg Device connection: Connected load: 3000 Watt Mains voltage: 230 volts Metrics: Grill surface dimensions: 360 x 360 mm Length (width): 400 mm Depth: 670 mm Height: 320 mm The device can be viewed at any time. Shipping within Germany 39,95€ Price net plus VAT 19% If you have any questions, just write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Phone: 016096679844 All information is subject to change, errors excepted.

Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape, optional with hanging hole, without zipper. 3 side sealing or 4 side sealing adjustable. Suitable for small bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Four bags are handled per machine cycle (quadroplex filling), whereby a high output will be achieved per minute. 4 dosing units are needed. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(70-180)xW(50-90)mm | filling capacity: max. 100ml | max. speed of the machine in neutral: 78 cycles/Minute (corresponds to max. 310 bags/min) | 14kW | 24m?/h | machine dimensions: ...

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

Pressure total: 280 ton Stroke: 800 mm Daylight: 1.600 mm Table surface area : 2.000 x 1.200 mm Slide area: 2.000 x 1.200 mm Die cushion capacity in table: 65 ton Die cushion stroke: 350 mm Die cushion pad area: 1.705 x 920 mm Approach speed: 15 m / min Working speed: 0,8 - 2,4 m / min Return speed: 8,5 m / min Required power: 2 x 37 kW Height over floor approx.: 4.850 mm Weight of machine approx.: 26 ton

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 13,705 mm Number of fields per row of shelves: 05 pcs. á 2,645 mm Number of levels plus ground level: 03 pcs. The scope of delivery includes: 06x pallet rack stand, used Material color: blue Stand profile: 80 x 70 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 6,000 mm high 1,000 mm deep 30x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Truss type: 2T 120 clear width: 2,645 mm load per pair of trusses 1,500 kg, at the same time. distributed load 60x locking pins, used Execution: compl. galvanized For securing the longitudinal members Against unintentional lifting 24x heavy-duty  ...

Table height: 850mm, cutting width/ height: 1200/ 850mm, saw band length: 7050mm, saw band thickness: 0.5mm, weight: 500kg.

With 2x self-adhesive aggregate AVERY, 1x wet glue aggregate, 1x format set, spare parts, format parts and documentation, machine was maintained regularly.

Machine printed only 46000 meters: this is the work, they mornally print in ONE DAY ONLY! So the machine is as good as new: it was jused for printing somples only ! 6-colour HP-Indigo, half- rotative-flexo-unit, UV, 1 flatpunch, 1 lenth-cut- ter, 1 up-ro

Machine Details Stock number 1105-03839 Machine type machining center - vertical Brand CHIRON Type FZ 15 W Year of construction 2004 Control type CNC SIEM 840D controller Storage location FRANCE Country of origin france Delivery time ready for shipment Freight Base EX WORK Technical details x-travel 550 mm y-travel 400 mm z-travel 425 mm SIEM 840D controller Table clamping surface 2x 660 x 400 mm Tool holder ISO SK 40 Spindle speeds - infinitely variable 20 - 12,000 rpm Feed infinitely variable 0 - 60,000 mm/min Rapid traverse 60 m/min Feed force X/Y-axis 5,000 N Feed force Z-axis 10,000 N Tool magazine: 20 Tool diameter max. 65 mm Tool diameter with 2 free spaces 150 mm Tool length - max. 220 mm Spindle diameter in the front. Bearing 70 mm Torque at the spindle max. 180 Nm Distance spindle/table 280 - 705 mm Spindle/stand distance 480 mm Milling capacit ...

Bosch DMA 140D 301-D, 1070077623-216 Technical data: 670V-705V140A max. Version: V.0.019 Original price: 13554,-€ Item condition: Used, in perfect condition More products of this category can be found in our extensive EBAY assortment. More plug-in cards - new and used - can be found in our shop! International shipping costs on request! Plug-in cards and other products buy cheap - Here you buy goods from the professional for the professional - In our SHOP you will find more attractive offers

Bosch DMA 140D 3301-D, 1070077623-208, 670V-705V, 140A NP:13554,-€ Item condition: Used, in perfect condition R10B2_EK (BOR) Further operating devices - new and used - can be found in our shop! International shipping costs on request!

Machine Details Stock-No. 1105-03853 Type of machine CNC Lathe Make MORI SEIKI Type NLX 2500/700 Year of manufacture 2016 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter 356 mm turning length 705 mm control MORI SLIM LIN X-AXIS 260 mm Z-AXIS 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm Turret change time 0.25 sec. tailstock 734 mm slide. of quill 80 mm rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine app ...

Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each

For sale: Multi-axis CNC lathe from Hyundai-Wia type LM 1600TTSY + LNS 3-meter bar magazine type Alpha 552. Beautiful versatile CNC lathe with lower and upper turret with 12 positions and intermediate positions each. The upper turret is additionally equipped with a Y-axis with a displacement of 100 mm (+50, - 50 mm). The machine is equipped with two identical spindles with a bar passage of 51 mm and a maximum speed of 6,000 rpm. The maximum turning diameter is 230 mm and the maximum turning length is 705 mm. Driven tool holders can be stored in all positions! The maximum speed on the driven tool is 5,000 rpm. The main motor power on both spindles is 15/11 kW and they are built-in spindle motors! The machine is also equipped with an automatic tool presetting device, a workpiece collecting device, a workpiece extractor for the right spindle, a workpiece discharge conveyor for the finished  ...

No. 5282: 1 Gebr. Spotting press 400 kN Fabr. RICE Type TUS 90 OK 40 Passage 930 x 705 mm Table top 900 x 1280 mm Plunger plate 900 x 1200 mm Installation height 1035 Space requirement approx. 3 x 2 x 3.6 m Transport dimension approx. 4 loading meters, Width 2.20 / height approx. 2.80 Weight approx. 8 tons Still ex works Cologne

Used ConceptLaser Mlab Cusing R for sale. All firmware and software updates are updated by GE technicians. Annual maintenance and service by GE. Titanium was used almost exclusively on the machine. - The machine comes with onboard parameters for the following materials: SS 316L, 17-4, Aluminum AlSi10Mg, Titanium CPTi Grade 2, Titanium Ti6Al4V ELI Grade 23, remanium star® CL (CoCrW), rematitan® CL (Ti6Al4V ELI). Cobalt Chrome, Bronze CuSn - Software CL WRX Control 2.0 (current status) is available on the machine and electronically - Original documentation is included, Layer thickness: 15 - 30 my, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 705x1848x1220, Weight in kg: about 600

Stand 2250x1000mm/ trusses 2705mm/ shelf load 3,30 to Technical data for the pallet racking system: Shelving system: Duwic | Cornix Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 8,515 mm Number of fields / row of shelves: 03 pcs á 2,705 mm Number of levels plus floor level: 02 pcs. The scope of delivery includes: 04x Pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,250 mm high 1,000 mm deep 12x pallet rack traverse, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Agraffe: 3 HK (hook) Clear width: 2,705 mm max. load per pair of trusses 3,300 kg at the same time. distributed load 24x locking pins, used Version: complete. galvanized To secure  ...

Stand 2250x1000mm/ trusses 2705mm/ shelf load 3,30 to Technical data for the pallet racking system: Shelving system: Duwic | Cornix Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,125 mm Number of fields / row of shelves: 05 pcs á 2,705 mm Number of levels plus floor level: 02 pcs. The scope of delivery includes: 06x Pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,250 mm high 1,000 mm deep 20x pallet racking beam, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Agraffe: 3 HK (hook) Clear width: 2,705 mm max. load per pair of trusses 3,300 kg at the same time. distributed load 40x locking pins, used Version: complete. galvanized To secure  ...

Overview The KHS Innoket Roland 16/4 H labeling machine was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in very good condition. Both wet glue and self-adhesive labels can be processed on the machine. The bottle plates are driven by servo motors. Tech Specs: Output: max. 18,000 bph Labels: self-adhesive labels and wet glue labels Bottle formats: 0.5l NRW Special: Other formats are available, as jam jars and spirits bottles were also labeled in the past. Formats can be set as desired, since the bottle plates are aligned via servos and not via a control cam Additional Equipment: Spare parts like servo motor, infeed screw with gearbox

LED street, path, square lighting ELSPRO SCOOPLED 56 Model: ESL56G Rated Power: 56 W rated cable: 70 W input voltage: 85 - 264 V AC 47 - 63 Hz bulbs: 2x LED modules with 28 LED pieces à 1 Watt Mast tube diameter: Ø 40 - 60 mm suitable mast attachments - see EL3255 and EL3256 ! New ! with documents ! Dimensions ( LED light ): 610 x 315 x 120 mm Dimensions ( packaging ): 705 x 400 x 220 mm

Machine vice WMW SX200 200 mm Jaw width: 200 mm jaw height: 63 mm wingspan: 0 - 300 mm used, tested ! Dimensions: 705 x 200 x 150 mm

Gear motor VEM ZG4 KMRa 90 L 6 ( ZG4KMRa90L6 ) 1,1,5 kW 20 rpm 220 / 380 V 3AC IP44 Shaft diameter: Ø 60 mm Wavelength: 140 mm Groove width: 18 mm Flange diameter: Ø 230 / 300 mm bolt circle diameter: Ø 265 mm 4x bore: Ø 14 mm New ! Dimensions: 705 x 300 x 340 mm