roland 705 used for sale

Butterfly valve ERIKS 705x DN200 PN16 110°C

Throttle valve, hydraulic valve FLUTEC, HYDAC DV-10-01.1/0 705026 Qmax.: 60 l/min Pmax.: 350 bar G3/8 ( inch ) New ! Dimensions ( valve ): 60 x 30 x 84 mm Dimensions ( packaging ): 85 x 70 x 32 mm  

welding table, straightening table, straightening flap, work table, clamping table small measuring table, measuring table MITUTOYO code No. 7052 measuring range: 30 mm projection: 45 mm working surface: Ø 40 mm used, tested ! with dial gauge ! Dimensions: 110 x 62 x 180 mm

turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal pump, In-line pump, Vertical high-pressure centrifugal pump WILO Multivert MVI805-1/16/E/3-400-50-2/EC 4024730 / 0403 / 02111 7 p: max. 16 bar t: max. 120 °C installation length: 200 mm Connections: Ø 48 mm Motor: QS FC 90S2A-42 H 1,85 kW 2810 rpm 230 / 400 V 3AC 50 Hz used, checked, overhauled ! Dimensions: 255 x 250 x 705 mm

Submersible pump, chemical pump, water pump, centrifugal pump SONDERMANN PUMPEN + FILTER GmbH & Co. KG RT-PP-10/110-500 Qmax.: 110 l/min Hmax.: 10,,0 m Immersion depth: 510 mm pump flange: Ø 210 mm Material: PP Motor: 0.25 kW 230 / 400 V 3AC 50 Hz used, tested ! Dimensions: 705 x 210 x 210 mm

Rotary vane pump, rotary vane compressor, rotary vane vacuum pump BECKER KDT 3.60 pumping speed: 54 m3/h final compression pressure: +1000 mbar engine: MAL28A250-4 2,2,0 KW 1440 rpm 230 / 400 V 3AC IP55 Including air filter and two filter cartridges 84040107000 New, with documents ! Dimensions: 705 x 355 x 320 mm

: 6 St. : 100 kg range L-W-H: 705 x 736 x 1019 mm weight: 126 kg Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet racking system: Shelving system: Cornix/Duwic Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,125 mm Number of fields per row of shelves: 05 pcs á 2,705 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 7,500 mm high 1,000 mm deep 40x pallet rack beams, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Clear width: 2,705 mm max. load per pair of trusses 3,300 kg, at the same time. distributed load 80x locking pins, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting 24x bolt anchor ...

Code: 0138 Brand: SOCOMEC Model: LN 260 - CE Standard Belt sanding machine with double goose neck for wood, furniture, steel, aluminium, metals, plastics etc. - CE Standard Technical data: Table length mm 2600 Table width mm 800 Vertical table stroke mm 570 Gooseneck height mm 700 Pulley diameter mm 250 Main motor Hp 4 Speed rpm 1400 Belt width mm 120/150 Belt length mm 7050 Belt rotation reversal Suction mouth diameter mm 120 Overall dimensions mm 3600 x 900 x 1400 h Weight kg 460

Technical data for the pallet racking system: Shelving system: Cornix/Duwic Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 67,420 mm Number of fields per row of shelves: 24 pcs á 2,705 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 25x pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 7,500 mm high 1,000 mm deep 192x Pallet rack beams, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Clear width: 2,705 mm max. load per pair of trusses 3,300 kg, at the same time. distributed load 384x locking pins, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting 100x bo ...

Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm Features: condition: good (used) Construction year: 2012 angle: 45° nominal voltage: 24V Conveying length in mm: 705 Nominal / outside width in mm: 570 Roll width in mm: 50 Roll division in mm: 75 Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you ...

Machine Details Stock-No. 1105-03929 Type of machine Bed Type Milling Machine - Universal Make KIHEUNG Type KNC U 650 Year of manufacture 1999 Type of control CNC Storage location FRANCE Country of origin Spain Delivery time on inquiry Freight basis ex location Technical details x-travel 1400 mm Y-Travel 650 mm Z-Travel 705 mm table-size 1700 X 650 mm T-slots 4 T-slot - width 18 mm taper ISO 50 turning speeds 20-3000 rpm Spindle motor 20 kW Feed 2- 5000 mm/min Rapid traverse: 11 mm/min table load 2500 Kg control HEIDENHAIN TNC-430 weight of the machine approx. 10 t dimensions of the machine approx. 4389 x 2.7 x 2.4 m Additional information manual milling head hydraulic tool clamping CNC CONTROL HEIDENHAIN TNC 430 VERY NICE LIKE NEW Technical details and information subject to amendments and errors. 2023 Created with ModulMWS by LogoTech oHG

Manufacturer: MAF, Control: yes, Inlet conveyor: 1.705 mm, Outlet conveyor: 1.750 mm, Through running hight mm: 860, Working width mm: 320, Foil wrapping machine mm: 460, Foil stations: 2, Through running hight mm: 860, Working width mm: 320,

General: Year of construction 2019 Control Siemens 840D SL ShopTurn Travel X1/X2 180 mm Z1/Z2 705/620 mm Y1 +50/-40 mm Switch-on hours approx. 4,000 h Software Option: Tool monitoring via current consumption Force-Control Driving on Fixed Stop Counting the processing 3D simulation of the finished part Spindle: Max. speed type 1 0 – 5,000 rpm Max. speed type 2 0 – 7,000 rpm Revolver: Number of stations 12 (BMT45) Dimensions and weight: Dimensions: 2,880 mm x 2,130 mm x 1,990 mm Weight approx. 7,500 kg Other equipment and accessories: Conveyor High-pressure coolant system 25 bar and tank 230 l Parts catcher with parts chute Hornbeam chuck on main spindle and counter spindle Tool package Preparation for external extraction device Bar feeder FMB turbo 5-65 / 3200 A

Sumbel Roland 350 banding machine; good condition; cleaned and tested; Working width 350mm; Proofing section; suitable for cold glue. Gluing machine Sumbel Roland 350; good condition; cleaned and checked; working width 350mm; pressing down unit; used for cold glue.

Grindstone, grinding pencil -Take: M12 -Outer diameter: 50 mm -Length: 65 mm -Number: 74 pieces -Sale: only complete -Weight: 28 kg

Inv. Num. : 7055 Type: MULTIPLEX 6100 Producer: MAZAK Created: 2006 Parameters: Control system: MAZATROL 640 T Duty cycle: 99006 h Maximum turning length: 700 mm Max. turning diameter: 230 mm Maximum spindle speed: 6000 1/min Spindle power: 7.5 kW Clamping diameter: 6 mm Rod diameter: 51 mm Travel X: 200 mm Travel Z: 365/420 mm Length: 3000 mm Width: 1650 mm Height: 2090 mm Weight: 6400 kg Equipment: Owner

Multi-purpose hoist, grab hoist, hoist, assembly hoist, cable hoist, universal cable hoist -Manufacturer: Greifzug -Load capacity: 3200 kg -Robust aluminum housing -Incl. Rope: 16mm/17m length with safety hook -with telescopic manual lifting rod -Scope of delivery according to pictures -Weight cable: 23 kg -transport box -Weight including accessories: 90 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Socket: Ø 40 mm -Outer diameter: 180/220 mm -indexable plates -Wgener no.: 021-7051703/01 1333797 -Wgener no.: 121212-059339 020 Y22 -Wgener no.: 056101 -Number: 13 cutters -Price: complete -Weight: 150 kg

Linear Bearing, Linear Rail, Linear Guide, Roller Guide Rail, Guide Rail, Cross Roller Guide -Manufacturer: Schneeberger, cross roller guide type 9700 -Hole spacing: 100mm M8 -Quantity: 4 pieces -Price per piece -Dimension: 705/22/H45 mm -Weight: 4.5 kg/pc.

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg

Linear drive, linear gear, screw jack, spindle drive -Pneumatic linear drive -Festo type: DGO -. -Stroke: 490 mm -Shaft: Ø 22 mm -Dimensions: 42/42/705 mm -Weight: 1.05 kg

Radial drilling machine, drilling machine, boom drilling machine, universal drilling machine, milling machine -Projection: 645 mm -Taper mount: MK3 -Speeds: 95 - 1050 rpm -Columns: Ø 190 mm -Spindle stroke: 195 mm -automatic feed: 0.05/0.10/0.20 mm/rev -Clamping table: 735 x 520 mm -Dimensions: 1350/705/H2170 mm -Weight: 1100 kg

Key data: 356 mm, 705 mm

Machine Details Stock-No. 1105-03951 Type of machine CNC Lathe Make MORI SEIKI Type NL 2500 /700 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Technical details turning diameter 356 mm turning length 705 mm control MSX-850 II MAPPS X-Axis 260 mm Z-Axis 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm turret change time 0,25 sec. rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine approx. 3.1 x 2 x 2.2 m Accessories Documents  ...

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven, 3 sections -Roll width: 625 mm -Rollers: Ø 60 mm -Roller spacing/axle distance: approx. 80 mm, 5 rollers are missing, see photos -Total length: 5.91 m -Dimensions: 3x 1970/705/H110 mm -Price/tax: complete -Transport dimensions: 1970/705/H330 mm -Weight: 235 kg

Used chocolate tank made by Faspoma, capacity of 3500 L. New 1993. Tank with agitator, heating jacket, has 2.2 kW motor, 705 rpm, CPA 43 pump, control cabinet. Piping within the tanks and platform to the tanks. Very good condition. 3 pieces available.

DMG Mori NLX2500SY/700 CNC Lathe CNC controller: CELOS ERGOline Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Swing diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross-slide mm: ø742 Bar work capacity mm: 80 Upper turret Number of tool slots St .: 10 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5/3,7 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18,5/15 Spindle bore mm: ø111 Spindle nose: JIS A2-8 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7,5 Spindle bore mm: ø73 Spindle nose: JIS A2-5 Counter spindle travel mm: 734 Equipment Chip conveyor Signal lamp Tool measuring arm part catcher various jaws various tools Working time hours Under power:35850(July 2022) Rated power kVA: 40,27

Automatic wheel balancer, coolant filter, ruler and grinding and grinding wheel | automatical wheel balacer, coolant filter, blade and blade support grinding wheel, Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min / max to grinding: 2/150 mm, Regulating wheel width: 355 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 20/460 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x355 mm, Grinding wheel width: 355 mm, Maximum infeed grinding length: 355 mm, Coolant system motor power: 0.70 Kw., Motor power grinding wheelhead: 37 Kw., Total power: 45 Kw., Voltage: 220/380 Kw., Long: 1.165 mm, Width: 3.3 ...

bore capacity in steel (diameter): 25 mm bore stroke: 150 mm Short spindle: MK 3 T-Slots Amount - Width - Distance: 2x14x180 mm base plate: 380x390 mm turning speeds: 60-1400 U/min voltage: 380 V Year: 1977 0 no. of spindles available: 1 table surface - upper: 705 mm clamping surface (upper): 400 x 315 mm base plate: 135 mm bore spindle - and spindle ram diameter: 39,6 mm weight of the machine ca.: 320 kg dimensions of the machine ca.: 550x870x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 70 Hour(s), Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 506 , Generator Volts: 415 , Generator Amps: 705 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/218740, , = More information =, , Type: Engine, Type number: 12QTK GENERATOR 506 KVA

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 350 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/7054, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 90U-6N4995; Transport weight [kg]: 1870

Gebr. roller conveyor with built-in QFA Bearing No.: ame896 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2101 QFA M2103 Drawing number: ROGA 24200621 QFA 14800266 Specifications Roll width: 1200 (mm) Length: 4,705 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 4.0 (kW) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor heavy Wheelbase: 1.56 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-86-M.D Year 2001 - Serial-No. 705468/01-304050 Arbeitsbreite max. 860mm / Working width max. 860mm Markiereinrichtung / Marking Device -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

BOBST SP 103 – E Type: AUTOPLATINE SP 103-E Year: 1995 Sheet size max: 1030 x 720 mm Sheet size min: 400 x 350 mm Max. Punching with gripper edge drop 1030 x 705 mm Max. Cutting without gripper edge drop 1030 x 720 mm Coinage 1030 x 690 mm Gripper edge 9 – 17 mm Platen pressure max 2,5 (250) MN(t) Production speed 8000 B/Std. Min. Paper 80 – 90 g/m2 Max. Carton 2000 g/m2 Corrugated E B - max 4 mm The machine is in very good working condition / Like new Push lay opposite operator side Pull lay operator side Centerline

NEW, 120 cm wide, with Lehnhoff MS01 Symlock mount, 73 kg net weight, suitable for 1.9 - 2.7 t excavators

General SKU020B071 LocationBarneveld MakePannevis Utrecht TypeRT 0,96x5,2 M No.1336 Year of construction1986 Main Features MaterialStainless steel Motor0.75 KW Surface5.3 m2 Specified Features - Vacuum belt filter Vacuum belt filter(1x) Filter surface5,3 M2 Filter width960mm Filter length5200mm Number of sections:4 With motor0,75 KW, 220/380 Volt With vacuum pumpmake SIHI, type LPHA-70530 BN Motor30,0 KW, 380/660 Volt MaterialStainless steel Information Floorspace10,5x2,6 M Total height2,4 MVacuum belt filtersPannevisFilters > Vacuum belt filtersBrand > Pannevis What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU252T444 LocationBarneveld MakeAerzen TypeDelta Hybrid D 62 S/DN 200 No.61-359839-00 Year of construction2012 Pressure Pressure buildup0.6 Bar Main Features Capacity51.06 m3/Min Motor75 KW Pressure0.6 Bar Specified Features - Blower Blowercheck Capacity51,06 m³/min Motor75 kW InletDN 200 OutletDN 200 Material Information CEcheck Floorspace1,7x2,1 m Total height2,1 m Extra SpecificationsIntake temperature: 20 °C Final temperature: 82 °C Compressor speed: 7054 rpm Motor speed: 2980 rpm Pressure difference: 0,600 bar Oil quantity: 8,70 Ltr. BlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more m ...

SANDRETTO Serie nove T injection molding machine 300T E1300 Screw D63 / 863 cm3 / 1523 bar Between columns: 665 x 665 Aperture: 660 Mold thickness: min 230 / max 730 Dim trays: 980 x 980 Installed power: 55.5 kW Dimensions: 7055 x 2547 x 2160 Weight: 12900 kg Euromap 12 robot interface Auxiliary cores (PF and PM) Top dosage 2 socket boards 10-way stainless steel water box APEX robot

Technical data for the pallet racking system: Shelving system: Cornix/Duwic Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 137,545 mm Number of shelves per row of shelves: 49 Number of levels plus floor level: 02 pcs. The scope of delivery includes: 50x Pallet rack racks, used Material color: blue Profile dimensions: 100 x 80 x 1.5 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled (bolted truss) 2,000 mm high 1,000 mm deep 196x Pallet rack trusses, used Material color: orange Box profile: 140 x 50 mm Truss Type: L517 Clear width: 2,705 mm max. load per pair of trusses 3,300 kg, with the same weight Distributed Load 392x Locking pins, used Material colour: sendzimir galvanized To secure the longitudinal members against unintentional lifting out 200x Bolt Anchor, new Ma ...

General SKU245P309 LocationBarneveld MakeBuss AG Basel TypeM-1000 Easy Clean No.7050 Year of construction1988 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket8 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor10 KW Specified Features - Paddle dryer Paddle dryercheck Capacitynett.700 Ltr (1375 ltr) Outletdia.400mm External heating spiral(30 Ltr) Shaft can be heated(33 ltr) Max. temperature160 degr C With mechanical sealcheck Motor10 kW, 220/380 Volt (EEx-e-II-T3) With variable speed drivecheck Speed mixing shaft5-30 rpm With vacuum pumpApovav PMH 136 D2 X3 Motor2,5 KW, 380 Volt MaterialStainless steel 1.4435 (316L) Information Mounted on frameEasy Clean With switchgearcheck Floorspace5,5x2,0 M Total height+/- 4,0 M Weight6000 KG Extra SpecificationsComplete system including :(2x) Vapor condensor U-type, surface ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70500 € : 1417.05 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66T - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

Demag Extra 150-430 Clamping/injection matrix Clamping force [kN] 1650 Mounting plate dimensions (hxv) [mm] 705 x 700 Clearance between columns (hxv) [mm] 475 x 475 Min./max. mold height [mm] 250-480 Maximum opening width [mm] 930 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 231 Shot weight [g] 205 Injection pressure [bar] 2020 Electro-hydraulic equipment Power rating of the pump motor [kW] 18,5 Power rating of barrel heating [kW] 11,1 Dimensions and weight (approximately) Net weight with control cabinet [t] 5,3 Dimensions (L x W x H) [m] 4,9 x 1,5 x 2,0

Key data: 500 mm, 2800 mm, 4 St.

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

Pressure Basket, Pressure Basket, Screen Filter, Screen Insert EATON HAYFLOW BKT-AS-02-HAYFLOW F671224A Inner Basket: Diameter( Inside / Outside ): Ø 110 / 113 mm, Length: 630 mm Outer basket: Diameter( Inside / Outside ): Ø 170 / 173 mm, Length: 705 mm bore diameter: Ø 3.5 mm pitch: 5 mm Material: stainless steel ( 1.4571 ) used, tested ! dimensions ( pressure basket ): 705 x 173 x 173 mm dimensions ( packaging ): 750 x 200 x 200 mm

Brand: KOHMANN Year: 2000 Model: GIANT 1440 Length of cutouts min. 100 mm – max. 1240 mm Width of cutouts min. 80 mm – max. 705 mm Film length min 55 mm – max 800 mm Film width min 30 mm – max 460 mm Film thickness min 0.03 mm – max 0.3 mm Accuracy of depositing the film on the cardboard max. +/- 1 mm Maximum PVC coil diameter 550 mm Internal diameter approx. 75mm Cardboard weight 200 gr/m2 to 2,000 gr/m2. Corrugated cardboard up to 6 mm thick.

cutting diameter: 500 mm capacity 90 degrees: flat: 800 x 500 mm capacity 90 degrees: square: 500 x 500 mm capacity 45 degrees: round: 500 mm capacity 45 degrees: flat: 530 x 500 mm capacity 45 degrees: square: 500 x 500 mm capacity 60 degrees: round: 350 mm capacity 60 degrees: flat: 350 x 500 mm capacity 60 degrees: square: 350 x 350 mm saw band length: 7050 x 54 x 1,3 mm vice: 500 x 800 mm cutting speed: 15 - 100 m/min coolant tank: 30.0 Liter Control: JAESPA NC height of material-table: 700 mm total power requirement: 9.5 kW weight: 3000 kg range L-W-H: 3200 x 3500 x 2360 mm maintained condition () current new price approx. 90.000 euros Special price on request Fully automatic, NC controlled 2-column band saw machine, for one-sided Miter cuts up to 60 degrees, for industrial use For sawing off solid material, pipes and profiles made of steel and cast iron as well as light and non- ...

Key data: 710 mm, 510 mm, 510 mm

Inv. Num. : 7053 Type: FH-580/40 Producer: MAZAK Created: 1998 Parameters: Control system: MAZATROL M PLUS Work table length: 500 mm Work table width: 500 mm Minimum spindle speed: 12000 1/min X-axis travel: 710 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: ISO 40 Max. tool diameter: 150 mm Max. tool length: 350 mm Max. tool weight: 12 kg Fast feed: 30000 mm/min Number of stacking positions: 60 Machine height: 2760 mm Machine length: 4700 mm Machine width: 2550 mm Machine weight: 10490 kg Equipment: Conveyor Cooler