quil used for sale

Universal Tool Milling Machine Make: MAHO Model: MH 1000 Technically flawless Accessories: - 3-axis digital display - Universal table 1,250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. Quill feeds 0.02/0.03/0.05/0.08/0.12/0.20 mm/rpm - Central lubrication, manually operated - Coolant device -Operating instructions The machine is open to the public. Ready for immediate use Delivery possible throughout Europe

CNC milling machine KNUTH WF 1 CNC The CNC milling machine of the renowned KNUTH brand, model WF 1 CNC, built in 1992, offers precise milling results and reliable performance. This used machine is ideal for beginners and hobbyists. Specifications: - Table clamping surface: 270 x 700 mm - Table movement longitudinal (X): 300 mm - Table movement vertical (Y): 200 mm - Table movement transverse (Z): 350 mm - Spindle mount horizontal and vertical: ISO 40 - 8 spindle speeds horizontal: 110 - 1230 rpm - 8 spindle speeds vertical: 150 - 1660 rpm - 8 feeds: 26 - 290 mm/min - Rapid traverse: 1100 mm/min - Quill travel: 60 mm - Drive power: 3.7 kW - Dimensions: approx. 1310 x 1380 x 1650 mm - Weight: approx. 1000 kg The machine is in a used condition and in need of repair. It has proven to be extremely reliable and will continue to work reliably for many years to come. With i ...

Universal Tool Milling Machine Make: MAHO Model: MH 1000 2x available! x-travel 1000 mm Tool holder SK 40 Digital. Head swivel +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1,250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. Quill feeds 0.02/0.03/0.05/0.08/0.12/0.20 mm/rpm - Central lubrication, manually operated The machine is open to the public. Ready for immediate use Free loading, transport no problem. Financing possible at favourable conditions! If you have any questions, just write or call.

turning diameter: 1400 mm turning length: 6000 mm control: Siemens 8 T turning diameter over bed slide: 1000 mm centre height: 800 mm workpiece weight flying clamped: 4500 Kg max. workpiece weight between centres: 20000 kg workpiece weight with 2 steadies: 30000 kg faceplate diameter: 1300 mm faceplate turning speed range: 1,4-400 U/min drive capacity - spindle motor: 112 kW max. torque on the faceplate: 40.000 Nm z-axis: 6500 mm x-axis: 700 mm feeds x-axis: 0,05-50 mm/min feeds z-axis: 0,05-50 mm/min rapid speed: 6000 mm/min feed power in the axis x + z: 35.000 N tailstock - quill dia: 250 mm quill stroke: 260 mm Tailstock quill travel speed: 1-500 mm/min total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 470 mm turning length: 720 mm control: FAGOR 8055 TC/B centre height: 366 mm dist. between centers: 3000 mm c-axis: 0 Drive tool: feed speeds: 8.000 mm/min main spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter in front bearing: 150 mm spindle rate: 0-1600 Spindle power: 17/20,5 max. torque on the spindle: 1590/1920 quill:: 100 mm tail stock: 200 mm taper: Morse 6 : Sauter VCI50 Ø400 mm. bed width: 430 mm total power requirement: 28 kW weight of the machine ca.: 5.700 kg dimensions of the machine ca.: 6.800 x2.385 x1.765 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum loadable weight (capacity between the tips) t 80 Machine weight t 160 Nominal turning diameter mm Ø 1,800 Maximum turning diameter mm Ø 1,900 Maximum diameter of passage on the bench mm Ø 2,600 Max turning length (distance between centers) mm 11,925 (12,025) Spindle axis height 1,300 mm Plateau diameter mm Ø 1,900 Plateau grip range mm Ø 300 ÷ Ø 1,350  Grip range 1 mm Ø 300 ÷ Ø 550  Grip range 2 mm Ø 500 ÷ Ø 950  Grip range 3 mm Ø 900 ÷ Ø 1,350 Clamping force (with max tightening torque 250 Nm) kN 200 Spindle motor power kW 160 Total installed power kW 310 Maximum spindle torque kNm 155 Spindle rotation speed range rpm 1 ÷ 150  Spindle rotation speed in 1st rpm range 1 ÷ 24  Spindle rotation speed in 2nd rpm range 20 ÷ 60  Spindle rotation speed in 3rd rpm range 50 ÷ 150 Carriage forward speed in transverse direction (X� ...

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Coolant device - Machine light - Machine feet

Offer 24009 Specifications: - Center height 200 mm - Center width 1500 mm - Maximum circulation – Ø above bed 400 mm - over face carriage 210 mm - Spindle bore 56 mm - Pick-up cone of the tailstock quill MK 5 - Tailstock quill travel 150 mm - Spindle speeds 11 - 2240 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrically pitsch thread - Drive 400 V / 7.5 kW - 3 jaw chuck - Space requirement approx. W 3300 x H 1600 x D 1200 mm - Weight approx. 2800 kg

x-travel: 400 mm y-travel: 320 mm z-travel: 400 mm Control: Heidenhain TNC 426/430 tool taper: SK 40 spindle turning speed range: 5000 U/min total power requirement: 5,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5 x 2,0 x 2,0 m 1 used Universal tool milling machine Make KUNZMANN Type WF 4 CNC Built in 2002 with Heidenhain TNC 426/430 Operating hours: Control on: 39893 h Machine on: 36335 h Program run: 5705 h Spindle running time: 8287 h Automatic tool suit, drilling quill Milling head swivels +/- 90° (without vice) A viewing is possible at any time by arrangement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 554 mm turning length: 1000 mm control: Fanuc total power requirement: 11 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,6 x 1,6 x 1,8 m HARRISON alpha 550 cycle lathe, used Controller: Fanuc Turning diameter: 554 mm Turning length: 1,000 mm Spindle passage: 90 mm Spindle: Speed (max.): 1,800 rpm Speed levels: 9 Power: 11kW Spindle passage (approx.): 90 mm Workpiece clamping: 3-jaw chuck, ø315 mm Tool carrier: Technology: quick-change holder on cross slide Travel in X: 310 mm Tailstock: Technology: Manual tailstock Quill ø: 95 mm Stroke: 145mm Taper: MK 6 Equipment/accessories: Chip management: chip tray Coolant management: KSS pump Shaft Machining: Fixed Bezel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 800 mm z-travel: 1100 mm Control: total power requirement: 60 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 7,0 X 6,0 X 4,0 m For sale is a Matec 30 HV machine number 569 built in 2003. The machine is expected to be released in August 2024 and can be used under Electricity can be visited. The machine has been serviced every year and is technical in a good condition. Manufacturer: Matec Maschinenbau Type: 30HV Machine number: 569 Year of construction: 11/2003 Control: Bosch Type 3 Osa control x-travel 3,000 mm y-travel 800 mm z-travel 1100 mm Main spindle: Type DMS 112 speed range - main spindle max. 12,000 min/-1 Drive power - main spindle 30 kW Max. Torque 190 Nm Tool holder HSK 63 A Drilling capacity steel approx. 60mm Milling capacity approx. 500 cm³ Thread cutting M30 Feeds: Rapid traverse (X / Y / Z) 30 m/min Feed speed 30,000 mm/m ...

Inv. Num. : 7399 Type: PUMA 3100 Producer: DOOSAN Created: 2015 Parameters: Control system: FANUC Max. turning length: 760 mm Max. turning diameter: 525 mm Maximum travel length in the X-axis: 293 mm Maximum feed rate in the Z-axis: 830 mm Spindle speeds: 2800 1/min Maximum main spindle power: 22 kW Number of tools: 10 pieces Length: 4095 mm Width: 1978 mm Height: 2010 mm Weight: 5850 kg Equipment: Conveyor Programmable tailstock/quill 3-jaw chuck 2022/8: Replacement of bearings in the spindle

turning length: 600 mm turning diameter over bed: 360 mm turning diameter over slide rest: 190 mm bed width: 295 mm number of spindle speeds: 45 - 2240 U/min. spindle bore: 33,0 mm tailstock quill taper MT: MK 3 feed: Längs 0,02-0,8 mm/U feed: Quer 0,0125-0,5 mm/U total power requirement: 5,5 kW weight of the machine ca.: 1900 kg range L-W-H: 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 600 mm max. turning diameter: 320 mm swing diameter above cross guideway: 365 mm control: CNC Pilot 4290 Heidenhain Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 28 / 21 kW max. Torque: 320 / 240 Nm spindle nose: 170h5 chucking diameter: 215 mm spindle diameter in front bearing: 130 mm spindle bore: 87 mm max. bar capacity: 65 mm c-axis: turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Driven Tool Stations:: Number of driven toolspositions: 12 pos. tool spindle speed range: max. 4.500 min/-1 power capacity driven tool-stations: 3,1 kW max. Torque: 10 Nm axis stroke:: x-travel: 250 mm z-travel: 635 mm Tailstock:: tailstock: 580 mm taper of center: MK 4 diameter of quill: 120 mm quill stroke: 150 mm feeds:: rapid traverse: X: 24 / Z: 30 m/min total power requirement: 44 kVA weight of the machine ca.: 5 ...

turning diameter over bed: 640 mm turning diameter over slide rest: 385 mm turning length: 3000 mm center height over bed: 315 mm centre distance: 3000 mm digital readout: 3-Achsen HEIDENHAIN bed width: 450 mm spindle taper: KK 8 DIN 55022 spindle bore: 82 mm turning speed range: 9 - 1800 U/min power requirement: 22 kW 3-jaw-chuck diameter: 400 mm quick change toolholder: MULTIFIX Typ C taper in tailstock-quill: MK 6 dia. of quill: 100 mm quill stroke: 280 mm coolant: voltage: 400 V total power requirement: 22 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,70 x 1,80 x 1,90 m coolant tank: 4,00 x 0,65 x 0,20 m - Serial-No.: 01192-01-808 - NEW Bearings on Main Spindle - Main gearbox rebuilt, all gear shaft bearings renewed - guide ways of cross slide grinded and scraped - rapid traverse for Z, Z0 and X-Axis - autom. feed in top support - 3-jaw Chuck, wedge type SMW  ...

- Table size: 400 x 300 mm - Quill stroke: 180 mm - Drilling capacity: 35 mm - Speed range: 110 - 1450 rpm - Spindle mount: MK3 - Total power: 0.8 kW - Machine weight: 350 kg - Space requirements (W x D x H): 1.2 x 0.9 x 2.0 m - Condition: very good Details runs smoothly, can be used immediately Accessories Vice, 3 chucks

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control: Kelco 80 - CNC controlled B-axis - Thermal stabilisation of the grinding head - Internal grinding device with 120 mm dia. holder - Grinding disc equipment right for discs dia. 400x50x127 mm - High-frequency internal grinding spindle MFV 1230 - Operating unit for MFV spindles - Hydraulic quill retraction - Micro-adjustment on tailstock - Sinus ruler on the workpiece headstock - Dressing device on the lower table - Dressing device on the upper table - Tool measuring system KEL-SET - Active longitudinal positioning KEL-POS, MOVOMATIC out of order - Gating sensor MOVOMATIC - Paper belt filter on the foto not included in the scope of delivery - Set of vibration-damping pads - 3-jaw chuck on the foto not inclu ...

grinding diameter: 360 mm grinding length: 650 mm centre height: 180 mm spindle taper: MK 4 speeds of grinding spindle: 1600 U/min turning speed range - workpiece spindle: 30 - 450 U/min power capacity - grinding motor: 4 kW dimensions of grinding wheel: Ø 400 x 100 x 127 mm max. width of grinding wheel: 60 mm max. workpiece weight between centers: 250 kg taper in tailstock-quill: MK 4 weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,02 x 1,57 x 1,80 m coolant tank: 1,02 x 1,02 x 0,90 m switchgear cabinet: 1,12 x 0,81 x 1,70 m - Serial No.: 8606606111 - rapid traverse - internal grinding device - dressing device - coolant equipment - Machine partly reconditioned incl. geometry check The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controls : Heidenhain Workspace Circulation diameter over bed 320 mm Circulation diameter over carriage 150 mm Center width 800 mm Working spindle Spindle holder according to DIN 55027 B6 Spindle bore 50 mm Spindle taper metric 60 Main drive Engine power at speed 1500 min-1 7 kW Spindle speed range 1st stage 0 - 1000 mm-1 Spindle speed range 2nd stage 20 - 4000 mm-1 Max. spindle torque 1.Stage 360 Nm 2nd stage 90 Nm Axis X Max. travel 190 mm Rapid traverse 5000 mm.min-1 Max. feed force 3000 N Axis Z Max. travel of the bed carriage 750 mm Rapid traverse 8000 mm.min-1 Max. feed force 5000 N Quick Release Holder Parat RD2 Max. steel diameter 25 x 25 mm Tailstock Diameter of the quill 65 mm Adjustment of the quill 120 mm Inner cone of the quill – Morse code 4 Dimensions of the machine Length 2180 mm Width 1341 mm Height 1775 mm Weight of the  ...

- Digital display Heidenhain - Accessories available Center height 200 mm Center width 1000 mm Turning diameter over carriage/bed 240/425 mm Length of crank from the plank with 4 jaws 180 mm Spindle bore 51 mm Inner cone 60 metric Recording Camlock D6" Speed 45-2240 rpm Lead screw pitch 6 mm Tailstock quill holder MK 4 Diameter of tailstock quill 70 mm Quilles: stroke 200 mm Feeds: Longitudinal 0.05-2.8 mm/rev Flat 0.05-2.8 mm/rev Rapid traverses: Longitudinal Thread pitches: Metric 0.5-14 mm English 2-56 U/1" Module 0.125-3.5 Motor 380 volts, power 12.5 hp Machine dimensions: W x D x H 2400 x 1200 x 1800 mm Weight 2100 kg

CNC lathe Manufacturer: Gildemeister Type: CTX 620 Linear V3 Year of construction: 2007 Control: Heidenhain IT Circulation diameter: 800 mm Drive power: 40%/100% ED 43/33 kW Speed range from – to: 20-2500 rpm Weight approx.: 9600 Kg Equipment: Axes: X,Z,C axis Powered Tools: Yes Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mount: MK5 Chip Conveyor: Yes Very good condition. Errors excepted

turning length: 1.000 mm swing diameter max. over bed cover: 600 mm swing diameter above cross guideway: 420 mm control: Eltropilot Heidenhain travel -x axis: 275 mm travel -z axis: 1.065 mm Main spindle:: turning speed range - main spindle: 16 - 3.200 min/-1 power capacity - main spindel: 27 kW max. Torque: 800 Nm spindle diameter in front bearing: 120 mm spindle bore: 85 mm chucking diameter: 260 mm spindle head: 220H5 turret:: number of toolpositions: 12 pos. Shank diameter: 40 mm turret change time: 0,8 sec. Tailstock:: diameter of quill: 100 mm quill stroke: 120 mm taper of center: MK 5 pressure center sleeve: max. 950 daN feeds:: rapid traverse: X: 10 / Z: 15 m/min Feed force: X: 500 / Z: 1.000 daN total power requirement: 52 kVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: 5,5 x 2,5 x 2,1 m Documents: Chip conveyor: Coolantsystem: Tailstock: hydraulic sy ...

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 4 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 -0.800 mm/rev Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Swivel steel holder protection - Rotating grain tip - Bed stop - Coolant device - Emergency stop push button - Machine light

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 63 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 5 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 - 0.800 mm/rev Weight, approx.: 1500 mm Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 3-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Bed stop - Rotating grain tip - Coolant device - Emergency stop push button - Machine light

: neu : Bulgarien : 71220 € : 1431.52 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 M : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: tu ...

- Digital display, Heidenhain 3 - axes - Fehlmann cross table: KS 321 D - Accessories: available Workspace: Quill stroke Z-axis 110 mm X-axis travel 450 mm Y-axis travel 260 mm Table spindle nose 0 – 527 mm Quick-change systems SF 32 Working spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space requirements W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 800 kg

Description: Machine number: 3201.29 Year of construction: probably 1993 Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Center distance: 1000 mm Longitudinal slide travel: 880 mm Cross slide path: 270 mm Turning length before chuck diameter: 200 mm With hard jaws: 830 mm Turning spindle: Spindle head: DIN55026 size 6 Spindle bore: 62.5 mm Spindle taper: 70 mm Main bearing diameter: 100 Tailstock: Quill stroke: 120 mm Quill diameter: 70 mm Mounting taper: MK 4 Chucks: Largest chuck diameter: 350 mm Largest turning chisel cross-section: 20 x 20 mm Feed drives: Feed force Z-axis: 10000 N Feed force X-axis: 6000 N Z-axis feed rate: 0.001 - 1000 mm/rev Rapid traverse Z-axis: 7 m/min X-axis feed: 0.001 - 1000 mm/rev Rapid traverse X-axis: 5 m/min Thread pitch lengthwise: 0.001 - 1000 mm/rev Speed range: 30 - 3000 rpm Transportation on standard truck Attention: no infor ...

Description: Center height: 260 mm Distance between centers: 1500 mm Turning diameter over bed: 530 mm Diameter over longitudinal slide: 475 mm Turning diameter over cross slide: 315 mm Bed width: 350 mm Main spindle bore STD = 80 mm Spindle holder: DIN55027 N.8 Morse taper of the main spindle: MK5 Constant cutting speed diameter 80 mm: Stage 1: 0 - 564 rpm Speed 2: 564 - 2500 rpm Feed rates: Z, X: 0 - 10000 mm/min Rapid traverse Z, X: 10 m/min Quill diameter: 82 mm Quill travel: 235 mm Morse taper in the quill: MK5 Power of the main motor: 11 kW With technical documentation as shown in the pictures Control: GE FANUC Series 0i Mate-TC Approx. Onsite Dimension. (l x w x h): 3,300 x 1,450 x 1,850 mm, weight approx.: 3,300 kg

Description: Operating voltage: 380 V Control voltage: 220 V Rated current: 6.5 A Frequency: 50 Hz Working range: Spindle diameter round: up to 15 mm Hexagonal: up to 12 mm Square: up to 10 mm Workpiece diameter: up to 15 mm Distance from collet chuck to tailstock edge: 240 mm Turning length with sliding headstock: up to 70 mm Main spindle speed (12 steps): 900 - 6500 rpm Drill tailstock stroke: up to 100 mm Clamping diameter of the quill collet: up to 13 mm Mounting in Morse quill: MK2 Tools for turning rings: 10 x 10 x 125 mm Parting steels: 12 x 3 x 120 mm Round forming steels diameter front/rear: 44/40 mm Incl. items of documentation as well as various spare parts and machine accessories for the machine Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 700 kg

Key data: 160 mm

Year of construction: 2003 Top height: 160mm Center width: 650mm Spindle bore: Ø 40mm Circulation over bed 320 mm Spindle speed: 20-2500 Tailstock mount: MK3 Quill Stroke: 85mm Quill diameter 40 mm Longitudinal carriage feed range: 0.020 - 0.630 mm/rev Feed range face slide: 0.006 - 0.200mm/rev Possible thread types: Metric, Inch, Modulus, Diametrical Pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Main motor 3.5 kW Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 710kg Accessories as shown in the pictures: 3-axis digital display, coolant device, chuck protection, 4-jaw chuck, punch pliers and other collet equipment incl. Collets, Multifix with 2 inserts, manuals.

Description: Operating voltage: 380 V Control voltage: 220 V Rated current: 6.5 A Frequency: 50 Hz Working range: Spindle diameter round: up to 15 mm Hexagonal: up to 12 mm Square: up to 10 mm Workpiece diameter: up to 15 mm Distance from collet chuck to tailstock edge: 240 mm Turning length with sliding headstock: up to 70 mm Main spindle speed (12 steps): 900 - 6500 rpm Drill tailstock stroke: up to 100 mm Clamping diameter of the quill collet: up to 13 mm Mounting in Morse quill: MK2 Tools for turning rings: 10 x 10 x 125 mm Parting steels: 12 x 3 x 120 mm Round forming steels diameter front/rear: 44/40 mm Incl. items of documentation as well as various spare parts and machine accessories for the machine Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 700 kg

Description The FPK4 universal milling cutter from Knuth has the following features: High-quality cast iron machine rod ensures a high degree of dynamic stiffness and long-lasting precision All guides are hardened and precision ground Precision ball screws on all axes Automatic advance on all axes, infinitely adjustable with rapid advance The vertical milling head can be tilted ± 90° and the quill adjusted manually SPECIFICATIONS: Table dimensions MM 320x750 Vertical table MM 220x830 Travel on axis – X, automatic / manual MM 380 / 360 Travel on axis – Y, automatic / manual MM 200 / 180 Axis stroke – Z MM 370 / 340 Rapid traverse axis – X / Y / Z mm/min 680 Engine power from main drive kW 2.2

serial number: 1868 : . quill stroke: . mm milling-head swivable +/-: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 460 mm

achine details Stock-No. 1105-03539 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type SL 150 MC Year of manufacture 1996 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex stock Price Technical details turning diameter 420 mm turning length 560 mm control fanuc 18 T Swing Dia. 455 mm rapid power traverse in X-and Z direction 18/24 m/min Travel x/z 220 / 520 mm Bar Material Dia. 45 mm Spindle Drive 11 / 7,5 kW Spindle RPM 50 - 5000 U/min Spindle Torque 143 Nm spindle nose JIS A2-5 Turret positions 12 tailstock quill taper MT 4 Tailstock Quill Stroke 80 mm tailstock quill diameter 75 mm Tailstock Travel 450 mm total power requirement 25 kW Additional information 3 AXIS MACHINE WITH LIVE TOOLS tail stock - Coolant equipment

CNC lathe Manufacturer: Gildemeister Type: CTX 410 V3 Year of construction: 2006 Control: Heidenhain IT Circumferential diameter: 505 mm Drive power: 40%/100% ED 28/21 kW Speed range from – to: 25-5000 rpm Weight approx.: 5600 Kg Equipment: Axes: X,Z,C axis Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mounting: MK4 Chip Conveyor: Yes Very good condition. Errors excepted

Table dimensions: 800 x 220 mm X-axis: 510 mm Y-axis: 450 mm Z-axis: 410 mm Spindle Adapter: ISO40 Speed range: 45 - 2000 rpm. 3-axis digital readout: Heidenhain Equipped with: - Spindle drill quill - Machine clamping - ISO recordings Country of origin: Germany Engine Power: Machine weight: 1400 kg Machine LxWxH: 230 x 230 x 170 cm

Drilling and milling machine Skoda HCW2 Machine type: HCW 2-180 5/16m Year of construction: 2009 Manufacturer: Skoda Plzen, CZ Control: CNC840D-Powerline Country of manufacture: Czech Republic Freight basis: from storage location + VAT incl. Dismatling and loading Technical data Control Siemens 840 D Powerline Travel distances X-axis 15,000 mm cross-column Y-axis 5,000 mm headstock vertical Z-axis 1,300 mm support beam (RAM) - horizontal W-axis 1,000 mm quill stroke horizontal Machine table rotary table plate field: Length 3,500mm 3,780mm Width 3,000mm 8,000mm max. table load: 60 t Travel 2500mm (V-axis) Drilling/milling spindle Tool taper: ISO 50 Quill Ø 180 mm RAM cross section 450 x 450 mm Power 100KW max torque 11,000 Nm (up to 85 rpm) max. speed 2500 rpm Rapid traverses: X; Y axis: 15 m/min W; Z - axis: 10 m/min Attachment ...

turning diameter over bed: 260 mm turning diameter over slide rest: 140 mm turning length: 500 mm centre height: 125 mm bed width: 160 mm spindle turning speed range: 16: 110-3600 U/min spindle bore: 28 mm face slide travel: 120 mm upper slide-adjustment: 120 mm tailstock quill taper MT: 2 tailstock quill adjustment: 80 mm drive motor: 0,37 / 0,88 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,3 x 0,6 x 1,2 m Electric 380 Volt: chuck: 140 mm Collet device with collets: 24: 1-21 mm Boring chuck: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500 mm, 3000 mm

Control: CNC Weiler (based on Siemens Sinumerik 840 D) Turning length: 3,000 mm Turning diameter: 1500 mm Spindle bore: 165 mm Sledge travel: 790 mm Upper slide: 250 mm Spindle speed: 1 – 1120 /2 steps Tailstock quill mount: MK 6 Tailstock adjustment: 3,000 mm Swivelling C-axis, chip conveyor, clamping cylinder with clamping hydraulics, extraction system, machine platform

Angelini DG 13 Manufacturer: AVM Angelini Model: Torino CNC Type: DG 13 Year of construction: 06/2002 Spindle speed: 3000 rpm Control: Fanuc Digital 21i Chuck Diameter: KNCS-N-260-72 Jaw Quick Change Power Chuck Rod Passage: 67mm Head: 12-speed, VDI40 Duplomatic Equipment: controlled quill Other: The machine is under power and can be viewed by appointment

turning length: 1000 mm turning diameter: 325 mm turning diameter over slide rest: 250 mm spindle bore: 32.0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2000 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2.2 kW weight of the machine ca.: 770 kg range L-W-H: 2150 x 950 x 1350 mm Furnishing: - robust conventional lead/pull screw lathe - 3-jaw lathe chuck Ø 160 mm type 3204/ DIN6350, BISON - NEWALL digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - rotating bezel - movable tailstock - Foot/spindle brake - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears - User manual (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg

Drilling capacity steel/GG: 40/55 mm Spindle holder: 4 MK Projection: 345 mm Table size: 500 Ø mm Quill stroke: 170 mm Spindle speeds: 80 - 710 rpm Feeds: 0.09/0.16/0.28 mm Drive motor: 380 V, 2.2/2.5 kW Dimensions: 1070 x 500 x 1940 mm Weight: 620 kg

turning diameter: ca. 850 mm turning length: 6000 mm control: Heidenhain 620 centre distance: 6000 mm swing diameter over bed slide: 1250 mm swing diameter max. over cross slide: 850 mm radial face slide adjustment: 680 mm spindle bore: 130 mm main drive AC:: spindle capacity 100% / 60% ED: 37 / 52 kW max. torque: ca. 9000 Nm turning speed range: 5 - 710 U/min feed motor AC:: rapid traverse X-axis: 6 m/min rapid travel Y-axis: 3 m/min tailstock:: diameter of quill: 160 mm quill stroke: 315 mm quill holder (inner taper): MK 6 steady, closed: passage: 450 mm total power requirement: 52 kW weight of the machine ca.: 16,5 t Overall size: 9000 x 2200 x 2300 mm dimensions of the machine ca.: 12 x 4 x 2 m Equipment/accessories: - face plate diameter 1200 mm - various fixators - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Quill stroke 180 mm Speed range up to 1200 rpm Table 645 x 510 mm Right/left rotation Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,700 mm, weight approx.: 350 kg

We have for sale used RADEMAKER CRUSTO BREAD LINE WORKING WIDTH 600 MM. The line is rarely used and in good condition. Been in storage for the last 6 years waiting to go into production again but because the factory changed its mind it is now being sold. The conveyor belts have been removed, they have hardened in storage. Otherwise the line has been checked and everything is working. Product specification: Products capacity for example. Niittypitko ( A long Finnish bun ) 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku ( sweet bun ) 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system  ...

Key data: 500 mm, 400 mm, 400 mm

Very good condition, regularly maintained Control: Heidenhain track control Axles: 3 Vertical and Horizontal Spindle X-axis travel : 500 mm Y-axis travel : 400 mm Z-axis travel: 400 mm Direct displacement measuring system Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle:80 mm Spindle speed: 40-2,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 6.63 kW Weight approx.: 1900 kg Dimensions LxW approx.: 2360x2170 mm

Key data: 500 mm, 350 mm, 375 mm

Control: MAHO 132 Direct displacement measuring system Vertical and Horizontal Spindle Table dimensions: 254x354 mm X-axis travel : 500 mm Y-axis travel : 350 mm Z-axis travel: 375 mm Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle: 50 mm Spindle speed: 63-4,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 8 kVA Weight approx.: 1650 kg Machine dimensions LxWxH: 2,050x1,430x1,812 mm

Description: ELHA radial drilling machine - Distance from spindle center to column center approx. 470 - 1470 mm The machine is equipped with: - Quill feed from 0.1 to 1.12 mm/rev. - Dice table - Voltage 500 volts (can be changed to 380 volts if costs are covered) For further technical data, please see the photos with the illustrations on the machine card! boring diameter: 40 mm, spindle taper: MK 4, turning speed range: 28 - 1120 rpm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 800 x 2,900 mm

Key data: 324 mm, 600 mm

CNC lathe GILDEMEISTER CTX 420 linear V 3 With control Heidenhain ELTROPILOT 4290 Year of construction: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circulation diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations 50 tool holders VDI 40 5 driven tools VDI 40 1 pc Hydraulic Lynette Tailstock with quill Conveyor Hydraulic jaw chuck Forkardt 0 250 mm Foot switch for jaw chuck + tailstock adjustment Coolant device 210 l ( 20 l/min ) 6 bar Operating instructions