We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,919 used machines on RESALE, but how to find them? Machine Search
used
x-travel: 850 mm y-travel: 600 mm z-travel: 500 mm table surface area: 1200 x 550 mm spindle taper: SK 40 control: HEIDENHAIN, TNC 121 spindle turning speed range: 36 - 1800 U/min quill stroke: 120 mm feeds: 5 - 2000 mm/min rapid traverse longitudinal: 4 m/min rapid traverse vertical: 2 m/min milling head -swivable +/-: 90 ° table rotating: 360 ° total power requirement: 12 kW weight of the machine ca.: 5 t dimensions of machine L x W x H: 2,80 x 2,0 x 2,61 m Accessories: vertical head with hydr. tool clamping and quill retraction, univ. table, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table surface area: 170 x 170 mm base plate surface area: 170 x 170 mm throat: 185 mm quill stroke: 65 mm spindle turning speed range: 500 / 896 / 1473 / 2428 U/min column diameter: 65 mm total power requirement: 0,37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: 36 mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800x400 mm quill stroke: ca. 100 mm turning speed - milling spindle: 40-2000 U/min feed range: X, Y: 8-400 mm/min feed range: Z: 4-200 mm/min rapid travel - x-direction: 2000 mm/min rapid travel in y-direction: 2000 mm/min rapid traverse cross: 1000 mm/min vertical head swivelling: +/- 90 Grad weight of the machine ca.: 2 t dimensions of the machine ca.: 2,1x1,7x1,7 m Universal milling machine with DRO for 3 axis, sviweable vertical milling head and horizontal milling spindle. -incl. knee and milling 3 arbors for milling discs -incl. 9 tool holder ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine with only 1000 operating hours Romi C 420 V 5.4 Cycle Lathe, Year of construction 2017, Control Siemens 828 D, Center distance 1,000 mm, Center height 215 mm, Spindle bore Ø 53 mm, Spindle speed up to 4,000 rpm, Direct drive spindle, Feed rate 10 m/min, Tailstock Quill stroke 120 mm, Bracket round Ø 25 mm, Bracket square 25 x 25 mm, Machine dimensions L/W 3100/1240 mm,
used
turning length: 1250 mm turning diameter over bed: 400 mm turning diameter over slide rest: 246 mm turning speed range: 15 - 2500 U/min spindle bore: 54,0 mm quill stroke: 140 mm morse taper: 4 MK feed range: 0,036 - 1,2 mm/U bed width: 318 mm work height max.: 1050 mm travel -x axis: Plan 250 mm travel -z axis: Ober 130 mm spindle nose: D1-6 Camlock total power requirement: 7,5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2500 x 1100 x 1300 mm from a training workshop good condition (!) The Colchester Triumph VS is the all-rounder”. From the heavy cutting This precision machine corresponds to the fine precision finish Requirements from modern tool construction, form construction or training company. Furnishing: - 3 -cheezing - diameter 200 mm, with replacement cheeks - Multifix steel holder, with use - Continuous speed adjustment via electric potentiometer - ...
used
turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg range L-W-H: 2320 x 1400 x 1600 mm Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front ...
used
DOOSAN LYNX 2100 LMA CNC turning center was manufactured in 2021 in South Korea. The machine offers best-in-class turning performance and precision, thanks to a wide design, a highly stable bed, a low-vibration spindle and a full guide guard that protects against coolant leaks and chips from entering into the machine. All this makes the DOOSAN LYNX 2100LMA CNC lathe ideal for any industrial facility where quality and precision are top priorities. The used spindle is driven by a reliable electric motor with high power, which is used for the versatile use of tools taken from the 12-position headstock. The turret, on the other hand, is controlled by a powerful servomotor which guarantees fast and accurate tool selection. All machining parameters are programmed in the intuitive DOOSAN FANUC i Series CNC control with many useful features, whose excellent optimisation allows maximising mach ...
new
turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Specifications: longitudinal X-axis: 500 mm Vertical Y-axis: 350 mm transverse Z-axis: 380 mm Speed range: 63 - 3700 1/min Gears: 2 Tool holder: SK 40 Quill stroke vertical: 50 mm Feed in X, Y, Z axis: 0.2 - 3.8 / 0.1 - 1.9 / 0.1 - 1.9 - 1.9 mm/rev Equipment: -Digital - Rigid table - Large Chip Tray - Machine lamp - Coolant device
used
Key data: 280 mm
Year of construction 2015 Center height: 165 mm Center width: 650 mm Turning diameter over bed: 280 mm Face slide: 180 mm Spindle speed: 30 - 4000 rpm (infinitely variable) Spindle bore: 43 mm Feeds: 0.025 - 0.9 mm/rev Thread pitch: 0.2 - 7 mm Spindle head DIN 55027: Size 5 Bed sledge travel: 610 mm Sledge travel: 165 mm Upper slide travel: 115 mm Inner cone tailstock quill DIN 228: MK3 Quill stroke: 82 mm Dimensions: 1600 x 860 x 1450 mm Weight: 1000 kg Total power requirement: 18kVA Accessories: 3-jaw chuck, Multifix quick-change steel bracket with cassettes, bezel, coolant device, lighting, chip protection
used
x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTec ...
used
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 quill stroke: 100 mm spindle turning speed range: 40 - 2000 U/min voltage: 380 V Table dimensions: 800 x 400 mm weight: 1,9 t total power requirement: 3,0 kW dimensions of the machine ca.: 1,90 x 1,80 x 1,90 m digital readout, 3-axis: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 600 mm, 400 mm, 400 mm
Specifications: Philips Control CNC 432 Working area X 600 mm Working range Y 400 mm Working range Z 400 mm Angle table 1000 x 400 mm Tool holder SK40 Quill stroke 80 mm Speed range 80 - 4000 rpm. Feed range X,Y,Z 1 - 2000 mm/min. Rapid traverse X/Y/Z 4/3/5 m/min. Rapid traverse Y 3 m/min Rapid traverse Z 5 m/min Resolution 0.001 mm Weight approx. 2.3tt Good technical condition. An electrified tour is possible.
used
Control Heidenhain TNC 620 Travel X 400 mm Travel Y 315 mm Travel Z 350 mm Table clamping surface 710 x 315 mm Recording ISO 40 Distance from spindle nose to table 100 / 450 mm Max. horizontal spindle speed 3000 rpm Max. vertical spindle speed 3000 rpm Drill quill: 80 mm Rapid traverses X,Y,Z 5,5,3 (m/min) Power KW 10.5 (13.7) Dimensions LxWxH 1'520×2'2130×2'1950 Weight approx. 1700 kg
used
Center width 340 mm Center height 100 mm Headstock speeds 50 – 500 rpm. Table rotation 360° Table tilt +/- 11° Table speed 0 – 5 m/min. Grinding wheel diameter 350 mm Spindle cone MK 5 Tailstock quill holder MK 3 Grinding wheels width 50 mm Grinding wheel bore 127 mm Hydraulic transverse stroke 38 mm Total power requirement 4.5 kW Dimensions L x W x H 2020 x 1200 x 1450 mm Weight 1700 kg
used
Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik SL 1 cycle control Year of construction: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation O above bed : 435 mm Circulation O over face slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 4-fold PARAT tool holder 20 PARAT tool holders 3 jaw chucks RÖHM Duro T 200 1 pc Rotating Lynette 0 160 mm Tailstock with extendable drill quill Coolant device Chip drip tray Operating instructions
used
turning length: 1500 mm turning diameter over bed: 460 mm turning diameter over slide rest: 240 mm turning dia. in gap: 650 mm number of spindle speeds: 32 - 2000 U/min. turning speeds: 12 Stk. spindle bore: Ø 58.0 mm quill stroke: 130 mm bed width: 300 mm tailstock quill taper MT: DIN 228 / MK 4 spindle taper: DIN 55027 / D 1-6 feeds - longitudinal: 0,031 - 1.7 mm/U feeds - cross: 0,014 - 0,784 mm/U voltage: 380 V total power requirement: 5.5 kW weight of the machine ca.: 1977 kg range L-W-H: 2750 x 1080 x 1370 mm Machine from a maintenance workshop current new price ~ 17.500 euros Special price on request Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RÖHM 3-jaw chuck, including replacement jaws & chuck key - foldable lathe chuck protection - MULTIF ...
new
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
digital readout: make: SONY type: LG10 centre height: 175 mm centre distance: 650 mm grinding wheel size: 400x80x127 mm turning speeds: 1670/2110 U/min cross travel: 300 mm rapid- return speed for machining unit: 60 mm workpiece spindle head:: speeds:: 30-1000 U/min rotation movement: 0-90 Grad spindle taper MT: 5 taper in tailstock MT: 3 tailstock quill adjustment: 35 mm weight of the machine ca.: 3400 kg dimensions of the machine ca.: 2035x1970x1780 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
HAMLET - E35 Control - CNC Center height: approx. 200mm Center width: approx. 950mm Max. circulation over bed: approx. 410mm Max. circulation over face cuts: approx. 200mm Max. circulation offset approx. 440mm Max. workpiece weight: approx. 900kg Speed range from approx. 1-3000 rpm Two speed gears Spindle head according to DIN: 55027 Spindle diameter: 90mm Spindle bore: 54mm Schunk/Rota lining: approx. 200mm Flat stroke: approx. 230mm Longitudinal stroke: approx. 950mm Multifix with inserts Chisel cross-section 25x25mm Tailstock quill taper: MK 4 D33lx09vs Coolant system Sliding door/feed guard Dimensions: LxWxH 2.3x1.4x1.7m Machine weight 2100 kg
used
turning diameter: 500 mm turning length: 1250 mm swing diameter over bed slide: 285 mm turning speeds: 11,2 - 2240 U/min spindle bore: 62 mm quill stroke: 190 mm tailstock quill taper MT: 5 total power requirement: 13,0 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 3350 x 1500 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 500 mm, 250 mm, 260 mm
quill stroke 480 mm , table 800x320 , max. 300 kg , SF 32 , 100-9.000 rpm , 5kW , 60 Nm , Heidenhain TNC 124 ,
new
turning diameter: 660 mm turning length: 1500 mm swing diameter over bed slide: 420 mm Swingdiameter in the bed bridge: 850 mm centre height: 330 mm reus: 15 (9 - 1320) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 103 mm feed: längs 0,039 - 18 m/min feed: quer 0,02 - 9 m/min total power requirement: 11 kW weight of the machine ca.: 4170 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Column drilling machine CORDIA type HS 30 VG Masch. No. 303.081.118 Year of manufacture approx. 1980 Drilling capacity 30 mm Spindle holder MK 3 - short quill projection 300 mm Pinol stroke 160 mm Table size 500 x 450 mm Column diameter 125 mm Spindle speed 38-1450 rpm. 12 stages Feed 0.1 - 0.2 - 0.25 mm/rev Motor power 1.5 / 1.7 / 2.3 kW Mains connection 380 volts, 50 Hz - pole-switchable main motor with 3 speeds - 4 gear stages • Tapping device • Table height adjustment via hand crank • Clamping surface at the machine base Space required: L x W x H: 700 x 550 x 2100 mm , weight: 390 kg , good condition; used
used
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...
used
x-travel: 14.000 mm y-travel: 4.480 mm z-travel: 3.000 mm w-travel: 300 mm table:: table load: 145 t table width: 3.100 mm table length: 14.770 mm Passage height: 3.800 mm max. passage: 3.200 mm diameter of quill: 305 mm spindle turning speed range: max. 600 U/min rapid travel x/y/z: 6 / 6 / 12 m/min output: 100 kW control: SIEMENS 840 D Powerline quill:: ISO 60 electrics - voltage/frequency: 380/50 V/Hz weight of the machine ca.: t dimensions of the machine ca.: m table guiding: hydrostatic redesigned hydrostatics calculated to a maximum load of 450 tons orthogonal milling head ISO 60 angular milling head ISO 60 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22605 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AG 60 L Year of construction: 2012 Travel: 600 x 420 x 370 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm max. workpiece weight: 1500 kg Electrode changer: 6-fold Control: LN2 Quill clamping fixture: EROWA ITS Working container: 950 x 740 x 450 mm
used
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22603 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AQ 55 L Year of construction: 2007 Travel: 500 x 400 x 350 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm Electrode changer: 32-fold Working basin: 950 x 725 x 410 mm Quill clamping fixture: EROWA
used
x-travel: 13.000 mm y-travel: 2.500 mm z-travel: 2.250 mm w-travel: 360 mm table:: double table: 12.500 mm table load: 50 t table width: 2.400 mm bed length: ca 26.000 mm Passage height: 2.250 mm milling height: 2.000 mm max. passage: 2.750 mm diameter of quill: 130 mm spindle turning speed range: U/min transmission ratio: drive capacity - spindle motor: kW spindle taper: dia. of quill: 280 mm quill:: ISO 50 rapid travel x/y/z: 8 / 1,5 / 3 m/min electrics - voltage/frequency: 380/50 V/Hz weight of the machine ca.: t dimensions of the machine ca.: m table guidance: hydrostatic universal angular head 37 kW angular milling head 37 kW angular milling head 56 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 110 mm x-travel: 900 mm y-travel: 600 mm cross rail adjustment - vertical: 635 mm quill travel: 200 mm column daylight: 950 mm max. distance between table and spindle-nose: 15 - 850 mm table surface area: 1020 x 860 mm table load: 800 kg speeds: 10 - 2500 U/min adjustment speed: 5 - 2500 mm/min tool taper: ISO 40 electrics - voltage/frequency: 380/50 V/Hz total power requirement: 8 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4,9 x 2,9 x 3 m - 2 axis digital-readout ELESTA - with misc. tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 11.700 mm y-travel: 6.400 mm z-travel: 975 mm w-travel: 3.500 mm table:: table load: 200 t table width: 3.200 mm table length: 2 x 5.500 mm Passage height: 3.900 mm max. passage: 3.600 mm diameter of quill: mm spindle turning speed range: max. 650 U/min rapid travel x/y/z: 10 / 2,5 / 2,5 m/min output: 100 kW control: SIEMENS 840D Solutionline quill:: ISO 60 + ISO 50 spindle drive: 75 kW electrics - voltage/frequency: 380/50 V/Hz weight of the machine ca.: t dimensions of the machine ca.: m IKZ (not for heads) attachment head: clamping automactically high-speed spindle 35 kW, nmax. 2.400 rpm spindle extension 650 mm angular milling head 4 x 90°- short L = 475 mm angular milling head 4 x 90°- long L:= 1.400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
In its current state, the machine can be used as a cycle machine in insertion mode. Clamp tension and quill are pneumatically controlled. Max diameter 25 mm.
used
Table mm. 1250 x 920 Spindle diameter mm. 80 Tool holder ISO 40 Travel X mm. 1430 Travel Y mm. 985 Stroke Z mm. 850 Spindle speed 1500 rpm Quill stroke mm. 530 ECS CNC accessories
used
Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special equipment: Software update Turn-Plus rapid traverse X/Z: 10m/15m Spindle speed: 25-5000 rpm Turret: Sauter 12-position turret, no driven tools Chuck: Power chuck SMW Autoblock Spindle passage: 0 Turning diameter: approx. 200 mm Turning length: max. 635 mm Tailstock/quill: available and mounted Chip conveyor: Yes, mounted Maschinenmaße: 4527x1940x1730mm Total weight: 5140 kg (incl. chip conveyor)
used
Wagner WDC 660x2000 lathe with Siemens 828 Shopturn CDC control: - 3 range changes - automatic gearbox - constant cutting speed - bench guides induction hardened, ground and covered with turcite - Hardened and ground precision ball screws - electrically ensured self-centering protection - manual tailstock, MK6 sleeve - centralized automatic lubrication of the guides - RS232 interface - complete refrigeration system - machine lamp - integral fairing with 2 sliding doors and safety glass window - 1 set of machine leveling pads - service tool - 8-position hydraulic revolver 25x25 - Fixed steady rest with rollers from 50 to 225mm - Self-centering with tangential control ra - Transport of shavings with wagon Complete with user manuals and control instructions Year of production: 2017 Working hours: 650 Technical detials: Maximum rotating diameter above the bed 660 mm ...
used
- Travel: 400 x 350 x 350 mm - Table: 575 x 500 mm - Workpiece weight: 700 kg - Generator genius - 80 amps generator power - Rotation spindle - Controlled C-axis - Internal controlled heat exchanger - Fire extinguishing system Kraft & Bauer - Exhaust system - Air connection for table chuck - EROWA quill chuck ITS - 24-fold electrode changer
used
Rotary table size: 2000x2000 mm Max. load on table: 20 tons Spindle diameter: 160 mm Inner cone of spindle: 100 metrical Max. spindle torque: 250000 kgcm Bed height: 550 mm Width of bed guides: 2000 mm Max. drilling depth with boring spindle: 1600 mm Max. move-out of quill: 1250 mm Normal travel of spindle headstock on the column: 2500 mm X-axis: 3000 mm Min. height of spindle axis over bed surface: 1400 mm Range of steplessly adjustable spindle speeds: 2-800 rpm Range of steplessly adjustable drilling feeds (spindle and quill): 0,5-1600 mm/min Range of steplessly adjustable milling feeds (spindle headstock and column): 1-3200 mm/min Speed of rapid travel at drilling (spindle, quill): 1600 mm/min Speed of rapid travel at milling (spindle headstock in vertical direction, column): 3200 mm/min Power of adjustable electric motor of direct current of spindle drive: 6-55 kW R ...
used
Main technical characteristics: Processing control digital indication; Spindle diameter mm, 200; Cone mm, 60; Quill size mm, 5205200; Maximum spindle torque: Cutter diameter 160mm. – 8600 Kn. Maximum depth of boring by spindle in mm., 2000; The maximum extension depth of the quill in mm., 1600; Movement of the headstock on the rack in mm., 3000/4000; Moving the rack along the frame in mm., 4000/20000; Dimensions and weight: -Height of a bed in mm., 500; Width of bed guides in mm., 2000; Width of rack guides in mm., 1700; Total machine power 180kVA Power of the main drive in kW, 77. The machine is equipped with a rotary table weighing 49000 kg. Machine weight 102000 kg. We are ready to discuss the price and all terms, please contact us for further discussion.
used
Distance between centers: 6000 mm Height centers: 800 mm Max swing over bed: 1600 mm Max swing over slide: 1225 mm Main spindle hole diam: 150 mm Speed range: 4 Speed range I: 0-90 rpm Speed range II: 0-180 rpm Speed range III: 0-355 rpm Speed range IV: 0-710 rpm Cross slide travel: 830 mm Quill diameter: 320 mm Quill travel: 250 mm Equipped with: Control: Siemens Sinumerik 840 D Shop Turn 4 independent jaw chuck: Ø 1400 mm 4 independent jaw chuck: Ø 560 mm Square Auto Turret: SAUTER 4 pos - Ø 320x320 mm Tailstock and quill: motorized Chip conveyor: Yes 1 steady rest: Ø 100-500 mm 1 steady rest: Ø 500-900 mm
used
TRAUB TND 400 CNC Lathe, used - machine no.: 192 - operating voltage: 380 V - frequency: 50 Hz - control voltage: 22 V - valve voltage: 24 V - coupling voltage: 24 V - total nominal current: 102 A - total connected load: 48 kW - read off operating hours: 48739 - control system: TRAUB SYSTEM TX 8F - spindle passage: 65 mm - clamping chuck diameter: 200/250 mm - turning diameter over cross slide: 240 mm - turning diameter over bed: 480/170 - turning length: 800 mm - tool holders in turret: 12 pieces for cylinder shaft 40 x 63 mm - slide travel cross: 220 mm - slide travel length: 850 mm - rapid traverse cross: 10000 mm/min - rapid traverse longitudinal: 20000 mm/min - speed at drive wheel: 4000 rpm - ttailstock quill diameter: 85 mm - quill stroke: 140 mm - holder MK5 - press force of quill at 20/60 bar: 3300 N/10000 N - the machine is equipped with one tailstock, ...
used
Capacity Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 50″ Spindle Spindle nose D1 – 6 Camlock D1 – 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm 14 – 300 rpm Medium 36 – 830 rpm 36 – 830 rpm High 109 – 2500 rpm 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI Number of Diametral Pitches 20 20 Range of Diametral Pitches 8 – 56 DP 8 – 56 DP Number of Metric Pitches 51 51 Range of Metric Pitches 0.2 – 14mm Pitch 0.2 – 14mm Pitch Number of Module Pitches 20 ...
used
XYZ EMX EMILL 2000 Year 2008 Proto TRAK EMX 2 -axis control Table 1,270 x 254mm Table travel 750 x 380mm Quill travel 127mm Spindle taper R8 Spindle speeds 60-4,200rpm Spindle drive motor 2.2 kW (3 HP). Manual operation/CNC cycles Interlocked table guards Automatic lubrication Low volt light, Coolant Swarf tray Excellent condition
used
bore capacity in steel (diameter): 35.0 mm bore capacity in cast iron: 40.0 mm arm length: max. 1230 mm turning speeds: 50 - 2250 U/min spindle taper MT: 4 MK base plate: 2030 x 200 mm quill stroke: 220 mm quill feed: 0.04 - 0.40 mm/U total power requirement: 3.62 kW weight of the machine ca.: 1500 kg range L-W-H: 2100 x 1000 x 2570 mm Description - Good gliding ability of the boom thanks to the ground . surface of the outer column - Mechanical locking of the swing movement of the boom - and the headstock displacement - Easy to adjust to the fixed workpiece - Simple, central operation at the front of the machine - Optimum cutting speed thanks to a wide speed range - Quiet running thanks to stable construction - Pole-changing drive motor - automatic spindle feed (0.04/0.07/0.11/0.17/0.28/0.40 mm/rev) - 1x MEUSER clamping cube with T-slots .. 615 x 500 x 510 mm - machined base plate - orig ...
used
x-travel: 850 mm y-travel: 630 mm z-travel: 550 mm table surface area: 1200 x 550 mm spindle taper: SK 40 spindle turning speed range: 20 - 4200 U/min spindle drive: 11,5 kW quill stroke: 95 mm feeds longditudinal/cross/vertical: 1 - 10.000 mm/min rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min control: HEIDENHAIN, TNC 426 total power requirement: 21 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 4,95 x 2,30 x 2,30 m Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160, vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
with live tools: c-axis: with CNC control: make: FANUC type: 18T-C turning diameter: 380 mm swing diameter: 520 mm turning length: 490 mm Workpiece head (C-axis): spindle taper:: ASA A2-8 (10) bar capacity: 75 mm spindle turning speed - stepless: 3500 U/min Power: 30 KW Top turret tool hodler:: tool taper: VDI 40 no. of working stations: 12 Stück with live tools: 6 Tools speed: 3000 U/min movement longitudinal: 490 mm Cross travel: 235 mm tailstock quill taper MT: 5 rapid traverse:: 20/24 voltage: 400 V dimensions of the machine ca.: 3.5 x 2.3 x 2.0 m weight of the machine ca.: 5.6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
useable stroke: 30 mm rivet shank max: max. Ø 6 mm throat: 130 mm spindle turning speed range: 1400 U/min quill stroke: 45 mm table surface area: 284 x 235 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Roll riveting machine with safety device for low-noise rolling riveting of all types of rivet heads. The rivet stopper is mounted at an angle in the roll rivet head on roller bearings so that it can tumble freely regardless of the rotation of the head. Fast and powerful movement of the roller rivet head thanks to a directly pressurized compressed air cylinder. Force requirements can be adjusted steplessly. Manual availbale The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Incl. 8-fold Sauter revolver - type: 0.5.480.12 -Incl. Three-jaw chuck Turning diameter 400 mm Turning length 1500 mm FAGOR 800 T CNC control Turning diameter over support 230 mm Spindle passage 50.8 mm Gear stages 3 Speed range 20 - 3500 rpm Tailstock quill diameter 60 mm Tailstock quill stroke 150 mm Tailstock mount MK 4 Spindle drive motor 7.5 kW Total power requirement, connection value 13.0 kW Approx. Onsite Dimension. (l x w x h): 2,900 x 1,300 x 1,800 mm, weight approx.: 2,200 kg
used
Table: 5500x2000 mm Maximum weight on table: 25000 Kgs X-axis traverse: 5000 mm Y-axis traverse: 3300 mm Z-axis traverse: 1500 mm Distance between columns: 2700 mm Heads: HURON manual Direct output (5000 rpm) Spindle taper: ISO 50 Speed range: 125-2000 rpm Spindle power: 42 kw Feedrate: 2-6000 mm/min Rapid feedrates /quill: 7200 / 5000 mm/min Approx machine weight: 60.000 kgs Machine dimensions: 12700x5420x4700 mm Year: 1993 (Retrofit 2015) Equipped with: Control: FAGOR 8065 double control Electronic doble handwheel: FAGOR Electrospindle head: FAEMAT (24000 rpm)
used
Key data: 227 mm, 410 mm
large circumferential diameter 270 mm gr. turning diameter over carriage 150 mm X - Axis 136 mm Z - axis 410 mm Spindle nose D 1-3" CAMLOCK Collets B 32 Spindle passage 28 mm Spindle passage w/collet 24 mm Speed range 50 - 5000 rpm Trustock quill diameter 35 mm Cone in the quill 2 MK Tailstock - quill stroke 100 mm Machine weight approx. 1200 kg Machine dimensions 1.7 x 1.2 x 1.6 m Configuration Title CNC FANUC QT2 teach-in MULTIFIX A steel bracket system Previous use in laboratory.