british flag
Resale Logo

quil used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords quil > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125452253 101

ELHA FBM 2700 for sale
Drilling And Boring Machines


FLANGES - drill ELHA FBM 2700 - 02-99-002 delivery time: immediate number: 02-99-002 manufacturer: ELHA type: FBM 2700 MACHINE data year: approx. 1984 L x W x H: CA. 3500 x 1500 x 2600 mm weight: approx. 5500 kg GO ...
used machine
 
FLANGES - drill ELHA FBM 2700 - 02-99-002 delivery time: immediate number: 02-99-002 manufacturer: ELHA type: FBM 2700

MACHINE data year: approx. 1984 L x W x H: CA. 3500 x 1500 x 2600 mm weight: approx. 5500 kg

GOOD GENERAL CONDITION

TECHNICAL DATA FLANGE BORHMASCHINE
Maximum drilling diameter steel: approx. Ã? 52 mm max drilling diameter in cast: approx. Ã? 60 mm tool holder: MK 5 Max swing: approx. Ã? 2700 mm speed range: approx. 20-1400 RPM projection: approx. 500-1200 mm traverse path Y - axis (manual): approx. 700 mm max. Height: approx. 600 mm Quill stroke: approx. 300 mm Tischaufspannï¬?äche: approx. Ã? 1250 mm power: 15 kW automatic drill bit feed: approx. 0.1 - 0.35 mm / U thread cutting performance: M 36 accessories â?¢ motor part Setup (hole number 2 - 48 holes / core (g) manually / feed & express gear â?¢ 3 - bake - chuck Ã? 500 mm â?¢ incl. 1 set of JAWS

â?¢ Manual / automatic - operation â?¢ right / left rotation â?¢ central lubrication â?¢ thread cutting device â?¢ emergency â?¢ coolant system â?¢ work lamps â?¢ drill depth stop â?¢ hand crank Y - adjustment

Accessories on request price and other specifications on request
1984
Price  
    request
125460803 102

HARRISON M 450 for sale
Center Lathe


turning diameter over bed: 450 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning speeds: 40 - 2000 U/mincentre height: 225 mmspindle bore: 67 mmtailstock quill taper MT: 4 MKtotal power requirement ...

 
turning diameter over bed: 450 mm
turning diameter over slide rest: 280 mm
turning length: 1000 mm
turning speeds: 40 - 2000 U/min
centre height: 225 mm
spindle bore: 67 mm
tailstock quill taper MT: 4 MK
total power requirement: 7,5 kW
weight of the machine ca.: 1,7 t
Dimensions (LxWxH): 2,3 x 1,2 x 1,7 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125452251 101

HÜLLER & HILLE UG 24 for sale


TAPPING machine HÃ?LLER & HILLE UG 24 - 02-08-003-shipping time: immediately number: 02-08-003 manufacturer: Hüller Hille & type: UG 24 MACHINE data built: approx. 1991 L x W x H: approx. 600 x 800 x 1 ...
used machine
 
TAPPING machine HÃ?LLER & HILLE UG 24 - 02-08-003-shipping time: immediately number: 02-08-003 manufacturer: Hüller Hille & type: UG 24

MACHINE data built: approx. 1991 L x W x H: approx. 600 x 800 x 1800 mm weight: approximately 400 kg of very good general condition specifications maximum thread area in steel: approx. M 3 - M 24 max range of threaded in cast: M 3 - M 30 head swiveling: 360 degrees of Werkzeugspannsys TEM: Bilz - clamping system speed range: approx. 250-500 rpm projection: approx. 260 mm Tischaufspannï¬?äche: approx. 390 x 300 mm Quill stroke: approx. 100 mm distance table - spindle: approx. 50-500 mm working height: 880 mm accessories â?¢ various change gears â?¢ various Bilz -. Clamping recordings â?¢ various compensation chucks â?¢ foot switch â?¢ emergency - off â?¢ electrical cam - limit switch â?¢ left / right - run

Accessories on request price and other specifications on request
1991
Price  
    request
125460805 102

GEMA LZ 185 for sale
Center Lathe


turning diameter over bed: 370 mmturning diameter over slide rest: 230 mmturning length: 700 mmturning speeds: 25 - 2000 U/mincentre height: 185 mmspindle bore: 40 mmtailstock quill taper MT: 3 MKtotal power requirement: ...

 
turning diameter over bed: 370 mm
turning diameter over slide rest: 230 mm
turning length: 700 mm
turning speeds: 25 - 2000 U/min
centre height: 185 mm
spindle bore: 40 mm
tailstock quill taper MT: 3 MK
total power requirement: 3,2 kW
weight of the machine ca.: 1,2 t
Dimensions (LxWxH): 1,85 x 0,8 x 1,5 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125452247 101

COLLET BU 1600 for sale
Drilling And Boring Machines


BOILER RADIAL drilling machine COLLET BU 1600 - 02-06-011 delivery time: immediate number: 02-06-011 manufacturer: Collet type: BU 1600 MACHINE data built: approx 1980 L x W x H: CA. 3500 x 1200 x 3000 mm weight: app ...
used machine
 
BOILER RADIAL drilling machine COLLET BU 1600 - 02-06-011 delivery time: immediate number: 02-06-011 manufacturer: Collet type: BU 1600

MACHINE data built: approx 1980 L x W x H: CA. 3500 x 1200 x 3000 mm weight: approx. 5000 kg

Very good condition specifications boiler - RADIAL - drill diameter drilling in steel: approx. Ã? 52 mm max drilling diameter in cast: approx. Ã? 60 mm tool holder: MK 5 speed range: approx. 20-1000 rpm projection: approx. 1600 mm column diameter: approx. Ã? 300 mm Quill stroke: approx. 300 mm Tischaufspannï¬?äche: approx. 800 x 600 mm Z - adjustment (motorized): approx. 1400 mm slide adjustment (motorized): approx. 1000 mm distance spindle - table: approx. 400-1800 mm of automatic drill bit feed: approx. 0.06 - 0.5 mm / Rev swivel & Turning areas: Jib turning range: 360 degrees boom Swivel range: +/-30 degrees head rotation range: 360-degree head Swivel range: +/-90 degrees accessories â?¢ 4 support elements (roll to roll) â?¢ crane suspension system â?¢ central lubrication â?¢ links & Rechtsla UF accessories on request price and other specifications on request
1980
Price  
    request
125460811 102

GEMA LZ 185 for sale
Center Lathe


turning diameter over bed: 370 mmturning diameter over slide rest: 230 mmturning length: 700 mmturning speeds: 25 - 2000 U/mincentre height: 185 mmspindle bore: 40 mmtailstock quill taper MT: 3 MKtotal power requirement: ...

 
turning diameter over bed: 370 mm
turning diameter over slide rest: 230 mm
turning length: 700 mm
turning speeds: 25 - 2000 U/min
centre height: 185 mm
spindle bore: 40 mm
tailstock quill taper MT: 3 MK
total power requirement: 3,2 kW
weight of the machine ca.: 1,2 t
Dimensions (LxWxH): 1,85 x 0,8 x 1,5 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125452243 101

SORALUCE TR 1 - 1250 for sale
Drilling And Boring Machines


BOOM drill SORALUCE TR 1-1250 - 02-06-008 delivery time: immediate number: 02-06-008 manufacturer: Soraluce type: TR 1-1250 MACHINE data built: approx 1980 L x W x H: approx. 2000 x 1000 x 3000 mm weight: approx. 3500 ...
used machine
 
BOOM drill SORALUCE TR 1-1250 - 02-06-008 delivery time: immediate number: 02-06-008 manufacturer: Soraluce type: TR 1-1250

MACHINE data built: approx 1980 L x W x H: approx. 2000 x 1000 x 3000 mm weight: approx. 3500 kg

Good general condition specifications diameter drilling in steel: dia. 55 mm maximum drilling diameter in cast: approx. Ã? 60 mm tool holder: MK 5 speed range: approx. 29-1480 U/min projection: approx. 1250 mm column diameter: approx. Ã? 300 mm Quill stroke: ca . 340 mm Tischaufspannï¬?äche: approx. 1300 x 800 mm Z - adjustment: approx. 800 mm distance spindle - table: approx. 600-1400 mm

Distance from spindle - ground: approx. 800-1600 mm of automatic drill bit feed: approx. 0.05 - 0.50 mm / U boom rotation range: 360 degree electrical boom brake drill head travel range: approx. 850 mm electric drill head brake power: approx. 4,0 kW accessories â?¢ Kühlmitt eleinrichtung â?¢ right / left rotation â?¢ ammeter accessories on request price and other specifications on request
1980
Price  
    request
125460746 103

RECKERMANN FW 900 for sale
Universal Milling Machine


x-travel: 700 mmy-travel: 340 mmz-travel: 350 mmturning speeds: 32 - 2.800 U/minspindle taper: 40 SKspindle horizontal adjustable: 0 - 450 mmtable:: 1.000 x 400 mmquill stroke: 120 mmtotal power requirement: 4,7 / 6,0 kW ...
used machine
 
x-travel: 700 mm
y-travel: 340 mm
z-travel: 350 mm
turning speeds: 32 - 2.800 U/min
spindle taper: 40 SK
spindle horizontal adjustable: 0 - 450 mm
table:: 1.000 x 400 mm
quill stroke: 120 mm
total power requirement: 4,7 / 6,0 kW



This ad was created with MODUL MWS - the software solution of LogoTech.
1980
Price  
    request
125452240 101

COLLET BU 1600 for sale
Drilling And Boring Machines


BOILER RADIAL drilling machine COLLET BU 1600 - 02-06-006-shipping time: immediately number: 02-06-006 manufacturer: Collet type: BU 1600 MACHINE data year: ca. 1980 L x W x H: ca. 3500 x 1200 x 3000 mm weight: approx ...
used machine
 
BOILER RADIAL drilling machine COLLET BU 1600 - 02-06-006-shipping time: immediately number: 02-06-006 manufacturer: Collet type: BU 1600

MACHINE data year: ca. 1980 L x W x H: ca. 3500 x 1200 x 3000 mm weight: approx. 5000 kg

Very good general condition specifications boiler - RADIAL - drill diameter drilling in steel: approx. Ã? 52 mm max drill diameter in cast: approx. Ã? 60 mm tool holder: MK 5 speed range: approx. 14-710 RPM projection: approx. 1600 mm column diameter : approx. Ã? 300 mm Quill stroke: approx. 300 mm Tischaufspannï¬?äche: approx. 800 x 600 mm Z - adjustment (motorized): approx. 1400 mm slide adjustment (motorized): approx. 1000 mm distance spindle - table: approx. 400-1800 mm of automatic drill bit feed: approx. 0.06 - 0.5 mm / Rev Sweden NK & turning areas: Jib turning range: 360 degrees boom Swivel range: +/-30 degrees head rotation range: 360-degree head Swivel range: +/-90 degrees accessories â?¢ 4 support elements (roll to roll) â?¢ crane suspension system â?¢ central lubrication â?¢ winding - V orrichtung for cable accessories on request price and other specifications on request
1980
Price  
    request
125460575 109

DECKEL DE 25-C for sale
Die Sinking EDM Machine


Weight approx.: 4000 kgx-travel: 500 mmy-travel: 350 mmcontrol: Multiform 2 Dimensions (l x w x h) approx.: 0x0x0 mmz-travel: 350 mmDescription: DECKEL DE 25-C Die Sinking EDM Machine - S/N: 0481-0203 - working hours:  ...
used machine
 
Weight approx.: 4000 kg
x-travel: 500 mm
y-travel: 350 mm
control: Multiform 2
Dimensions (l x w x h) approx.: 0x0x0 mm
z-travel: 350 mm
Description: DECKEL DE 25-C Die Sinking EDM Machine
- S/N: 0481-0203
- working hours: 57095 h
- control-type: G45-25
- control: Multiform 2 (1997 upgraded to Multiform 4
- working tank retractable - dielectric demand: ca.200 l
- max. workpiece dimensions: ca. 650x450 mm
- max. workpice weight: 500 kg
- dielectric over table: 0-300 mm
- max. workpiece height: 260 mm
- colour RAL 6011
- Distance table- quill without collet chuck min./max.: 250 ? 600 mm
- electrode changer for 16 electrodes
- C-axis
- quill chuck: 3R Ø20 - fire-extinguishing installation type Kraft &, Bauer(no CE-declaration of conformity for the extinguishing system available), next system-check 04/2018)

- operational wearing
- no CE-declaration of conformity for the machine available) vor

transport dimensions
- machine incl. electric cabinet on palett L/W/H: 2,7m x 2,25m x2,85m The maschine has to be loaded on truck sideways by forklift on a pallet
- 1 dielectric tank: 1,4m x 1,3m x 1,16m
1986
used machinery auction RESALE 600 €  
  DE   request
125452234 101

HIMMEL TB 16 for sale
Drilling And Boring Machines


BENCH drilling machine sky TB 16 02-05-006 delivery time: immediate number: 02-05-006 manufacturer: Sky type: TB 16 MACHINE data year: ca. 1980 L x W x h: approx. 400 x 250 x 500 mm weight: approx. 40 kg Very good  ...
used machine
 
BENCH drilling machine sky TB 16 02-05-006 delivery time: immediate number: 02-05-006 manufacturer: Sky type: TB 16

MACHINE data year: ca. 1980 L x W x h: approx. 400 x 250 x 500 mm weight: approx. 40 kg

Very good condition specifications diameter drilling in steel: dia. 16 mm max drilling diameter in cast: approx. Ã? 20 mm tool holder: MK 2 speed range: approx. 800-4000 RPM projection: approx. 200 mm column diameter: approx. Ã? 80 mm Quill stroke : approx. 80 mm Tischaufspannï¬?äche: approx. 240 x 210 mm Z - adjustment (manually via hand crank): approx. 300 mm distance spindle - table: approx. 50-350 mm power supply: 380 volts accessories â?¢ chuck Ã? 1-13 mm â?¢ hand crank for table adjustment â?¢ mechanical Säulenkle mmung other accessories on request price and other specifications on request
1980
Price  
    request
125443091 2500

MATRAMATIC for sale
Matramatic - frame quilting machine


 
7,000 EU?  
  PL   request
125451847 101

SCHARMANN Ecocut 1.3 for sale
Horizontal Machining Center


X-travel: 2200mm, y-travel: 1600mm, z-travel: 1400mm, max. table load: 5t, quill diameter: 125mm, clamping surface: 4x 1000x1200mm, 2x 1250x1600mm, drive power: 30kW, with pallet changer.
used machine
 
X-travel: 2200mm, y-travel: 1600mm, z-travel: 1400mm, max. table load: 5t, quill diameter: 125mm, clamping surface: 4x 1000x1200mm, 2x 1250x1600mm, drive power: 30kW, with pallet changer.
1985
Price  
  DE   request
125401655 102

MAZAK INTEGREX E 410 H for sale
CNC Lathe


turning diameter: 610 mmturning length: 3.060 mmcontrol: Mazatrol Fusion CNC 640M main spindle: max. torque: 637 NmMain drive: 26/22 kWturning speeds: 0 - 4.000 U/minchucking diameter: 254 mmspindle bore diameter: 88 mm ...
used machine
 
turning diameter: 610 mm
turning length: 3.060 mm
control: Mazatrol Fusion CNC 640M
main spindle:
max. torque: 637 Nm
Main drive: 26/22 kW
turning speeds: 0 - 4.000 U/min
chucking diameter: 254 mm
spindle bore diameter: 88 mm
tool turret:
max. torque: 236 Nm
turning speeds: 0 - 12.000 U/min
tool taper: CAT40
tools in tool magazin: 40
x-travel: 740 mm
z-travel: 3.060 mm
y-travel: +/- 205 mm
rapid traverse y/x/z axis: 50 m/min.
feed speeds x/y/z axis: 0 - 8.000 mm/min
tail stock:
quill stroke: 130 mm
tool adaptor: MK5
total power requirement: 83 kW
weight of the machine ca.: 20,9 t
dimensions of the machine ca.: 6,75 x 3,35 x 2,952 m
new head in 01/2018

Accessories / equipment:
- C axis, Y axis, B axis
- power chuck KITAGAWA B 15 (381 mm)
- NC programmable travel stick
- Chip conveyor with coolant device
- Cabinet with 58 Capto 6 tool holders and tools
- Many jaws
- Documentation



This ad was created with MODUL MWS - the software solution of LogoTech.
2006
Price  
    request
125451834 101

GILLARDON GB 30 for sale
Boring Mills


COLUMN drilling machine GILLARDON GB 30 - 02-04-046-lead time: immediately number: 02-04-046 manufacturer: Gillardon type: 30 GB MACHINE data year: approx. 1985 L x W x H: approx. 600 x 600 x 1800 mm weight: approxima ...

 
COLUMN drilling machine GILLARDON GB 30 - 02-04-046-lead time: immediately number: 02-04-046 manufacturer: Gillardon type: 30 GB

MACHINE data year: approx. 1985 L x W x H: approx. 600 x 600 x 1800 mm weight: approximately 300 kg

TECHNICAL data maximum drilling diameter steel: dia. 32 mm maximum drilling diameter in cast: approx. Ã? 42 mm tool holder: MK 4 speed range: approx. 80-1500 rpm projection: approx. 320 mm column diameter: approx. Ã? 130 mm Quill stroke: approx. 175 mm Tischaufspannï¬?äc Hey: approx. 570 x 475 mm power: approx. 1,8 kW accessories â?¢ Chuck â?¢ work light â?¢ complete machine documentation â?¢ analogue RPM indicator â?¢ hand crank for table adjustment

Accessories on request price and other specifications on request
 
Price  
    request
125401260 103

WMW HECKERT FSS400 for sale
Milling Machine - Vertical


x-travel: 1120 mm y-travel: 400 mm z-travel: 430 mm feed:: x+y=16 - 800 / 18 step mm/min feed:: z= 5 - 250 / 18 step mm/min table load: 1,5 t clamping surface area: L:1600 x B:400 mm distance spindle center to column: 45 ...
used machine
 
x-travel: 1120 mm
y-travel: 400 mm
z-travel: 430 mm
feed:: x+y=16 - 800 / 18 step mm/min
feed:: z= 5 - 250 / 18 step mm/min
table load: 1,5 t
clamping surface area: L:1600 x B:400 mm
distance spindle center to column: 450 mm
distance spindle nose and table: min/max: 70/500 mm
revolutions per minute: 28 - 1400 / 18 step U/min.
quill stroke: 100 mm
milling head -swivable +/-: re/li=45° °
tool taper: SK 50
total power requirement: 14,5 kW
weight of the machine ca.: 4,0 t
dimension machine [...]: 2,0 x 1,7 x 2,7 m
dimensions electric cabinet LxWxH: 0,8 x 0,45 x 1,6 m
Machine is operated via operating panel. Beam 1800mm
including coolant system
Without pictured props!
1976
Price  
    request
125451768 104

TSCHUDIN HTG 430 for sale
Cylindrical Grinding Machine


Center distance: 480mm, center height: 100mm, grinding wheel diameter: 500mm, max. grinding wheel width: 80mm, grinding wheel bore: 203.2mm, motor power: 5.5kW, spindle cone: MK 4, spindle nose: 3x M48, swivelling range: ...
used machine
 
Center distance: 480mm, center height: 100mm, grinding wheel diameter: 500mm, max. grinding wheel width: 80mm, grinding wheel bore: 203.2mm, motor power: 5.5kW, spindle cone: MK 4, spindle nose: 3x M48, swivelling range: 360°, rotational speed: 65-500/min, quill cone: MK 3, quill stroke: 20mm, length: 2200mm, width: 1700mm, weight: 2.6t.
 
Price  
  DE   request
125401262 103

WMW HECKERT FSS 315 2/PS for sale
Milling Machine - Vertical


x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm distance spindle center to column: 360 mm distance spindle nose and table: min./max.: 95 / 450 mm revolutions per minute: 28 - 1400 / 18 step U/min. quill stroke: 90 mm  ...

 
x-travel: 850 mm
y-travel: 280 mm
z-travel: 355 mm
distance spindle center to column: 360 mm
distance spindle nose and table: min./max.: 95 / 450 mm
revolutions per minute: 28 - 1400 / 18 step U/min.
quill stroke: 90 mm
milling head -swivable +/-: re/li 45 ° °
tool taper: SK 50
table load: 1,0 t
feed:: x+y= 16 - 800 / 18 step mm/min
feed:: z = 5 - 250 / 18 step mm/min
clamping surface area: L: 1250 x B: 315 mm
total power requirement: 8,0 kW
weight of the machine ca.: 4,0 t
dimension machine [...]: 1,75 x 1,5 x 2,6 m
dimensions electric cabinet LxWxH: 0,85 x 0,45 x 1,6 m
Machine is operated via control panel - Control Panel Arm 1400mm
Without pictured props!
 
Price  
    request
125437017 109

CHARMILLES Roboform 400 for sale
EDM Machines


Current generator status - may 2018: 51.688 h Well maintained and preserved, said there's always under power. Total weight of 3,750 kg Erowa - Quill with 5-fold changer High-performance generator: 128A for great remo ...
used machine
 
Current generator status - may 2018: 51.688 h
Well maintained and preserved, said there's always under power.
Total weight of 3,750 kg
Erowa - Quill with 5-fold changer
High-performance generator: 128A for great removal volume
Table: 800x560mm
Workpieces up to: 1. 100x780mm
Traverse paths: x = 450 mm, 320 mm = y, Z = 410 mm
Complete documentation and software diskettes for prolonged power outage there.
New price of the machine of 1991 was approx. 180,000 EUR.
The range magnet apparent in the photo and the lamp are not included, as the dielectric filling.
1991
Price  
    request
125386352 102

RAVENSBURG KBZ 100/55 for sale
Heavy-Duty Lathe


Weight approx.: 23000 kgfaceplate diameter: 1500 mmturning diameter over bed: 2500 mmturning length: 4400 mmDimensions (l x w x h) approx.: 8900 x 2600 x 6000 mmturning speed range: 4 - 180 rpmspindle bore: 80 mmDescript ...
used machine
 
Weight approx.: 23000 kg
faceplate diameter: 1500 mm
turning diameter over bed: 2500 mm
turning length: 4400 mm
Dimensions (l x w x h) approx.: 8900 x 2600 x 6000 mm
turning speed range: 4 - 180 rpm
spindle bore: 80 mm
Description: RAVENSBURG KBZ 100/55 Heavy Duty Lathe. Depth below hallway approx. 800 mm. BZ version for heavy profile cuts with 2-strip bed. The machine is equipped with rapid traverse in 3 axes, top feed feed, faceplate 1500 mm diameter, jogging mode for main spindle, adjustable chuck protection (for separate wall mounting), motorized tailstock adjustment, 2 fixed steady rests, insert quill to extend the tailstock quill, 2 steel holders Submersions, HEIDENHAIN digital display for 3-axes, replacement sprocket for main spindle drive, coolant system, documentation (incomplete) with foundation and switch plan, floor space above floor, without sliding feed protection approx. 8900 x 2600 x 2300 mm. For more details see our attached machine video.
1955
used machinery auction RESALE 23,000 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Cylindrical Grinding Machine TSCHUDIN HTG 430


Center distance: 480mm, center height: 100mm, grinding wheel diameter: 500mm, max. grinding wheel width: 80mm, grinding wheel bore: 203.2mm, motor power: 5.5kW, spindle cone: MK 4, spindle nose: 3x M48, swivelling range: 360°, rotational speed: 65-500/min, quill cone: MK 3, quill stroke: 20mm, length: 2200mm, width: 1700mm, weight: 2.6t.

Lathe GRAZIANO SAG 210


Center height: 225mm, center distance: 1000mm, swing over bed: 268mm, rotational speed: 45-2400/min, bore: 57mm, cross slide travel: 240mm, top slide travel: 130mm, feed rate: 0.019-0.3mm/U, quill stroke: 200mm, quill diameter: 68mm, length: 2700mm, width: 1400mm, height: 1400mm, weight: 2.3t, when overheated the machine shuts itself down.

Lathe VDF BOEHRINGER V 800NC-II


Max. spindle torque: 10000Nm, rotational speed: 5.6-1120/min, feed rate: 0.001-8000mm/min, rapid traverse: 8000mm/min, boring force: 20kN, quill diameter: 125mm, quill stroke: 280mm, chuck diameter: 630mm, control: B32T, including accessories.

CNC Lathe GILDEMEISTER NEF CT40


Turning diameter: 400mm, turning length: 600mm, swing over sledge: 225mm, center height: 260mm, spindle bore: 68mm, max. chuck diameter: 200mm, rotational speed: 20-4000/min, quill stroke: 100mm, length: 3500mm, width: 1700mm, height: 1700mm, weight: 3.5t.

LATHE HORIZONTAL DAEWO0 PUMA 240 LC


CNC: FANUC Oi- TB YEAR: 2006 CORSE X 242 mm - 680 mm Z Ø Swing over bed mm 420 rotating diameter 400 mm on the wagon rotating over bed mm 570 turnable chuck Length 648 mm spindle speed 3500 aSA A2-8 hydraulic turntable 3 jaws std 254 mm 18.5 to 22 kW motor power STRUCTURE BANCALE INCLINED AT 45 ° CAST IRON ABOUT WEIGHT KG 5740 TOWER TWO-WAY AUTOMATIC 10 tool stations TAILSTOCK tailstock quill in attack cycle vices 4 diameter tube mm diam 75/80 boost pressure 40 bar 660 kg PRESETTING TOOLS DESCENT / ASCENT AUTO (WITH BUTTON AND CODE M) AUTOMATIC LUBRICATION SYSTEM COOLING SYSTEM HIGH PRESSURE 6 BAR COLLECTION TANK COOLANT 240 LITER TRANSPORTER shavings BELT WITH EXIT ON THE RIGHT CABINET ON UNIT WITH COOLER HALOGEN LIGHTING ZONE WORK LAMP YELLOW ALERT AND END OF CYCLE "CE" in the rules.

CNC Boring Mills WMW UNION BFK 150


Type: CNC SIEMENS 840 D STROKE: 3000 mm. LONGITUDINAL STROKE: 1000 mm. Vertical stroke: 2000 mm. QUILL STROKE: 900 mm. Taper: ISO 50 SEATPOST DIAMETER: Ø 150 mm. Bed sizes: 1600 x 2000 mm.

Milling Machines quick jet QJM-GB-VS


Spindle speed- 60-3600 RPM Head swivel: Right and left 45° Quill travel: 140mm Ram travel: 450mm Distance from spindle table: NST30 & NST40 0-500mm R8 0-485mm Distance from spindle to column 165-615mm Quill feed per revolution of spindle 0.035/0.07/ ...

CNC Universal Milling and Drilling Machine DECKEL FP3A


X-travel: 400mm, y-travel: 400mm, z-travel: 400mm, quill stroke: 80mm, tool mount: SK 40, rotational speed: 40-4000/min, feed rate: 2-3600mm/min, rapid traverse: 4000mm/min, control: Contour 3, number of available machines: 2, year of construction: 1983,  ...

STANKO 165 x 5000


Used Stanko lathe 165 x 5000 Swing over bed: 1000 mm Turning length: 5000 mm Main engine: 22 kW 3 x 380 volts Quill: MK 6 Weight: 14500 kg Accessories: 4 jaws chuck Quill Rapid traverse to all movements

TOS SN 55 x 3000


Quill height: 275 mm Swing over bed: 650 mm Swing over support: 310 mm Turning lenght: 2000 mm Max. weight between quill and chuck: 1500 kg Spindle bore: 82 mm Spindle speed: 10 - 1000 ump/min Feeds longitudinal: 0.05 – 0.8 mm/U Feeds longitudinal ...

Lathe ALEX-TECH VIPER VT 40A/3000


Swing: 980mm, turning diameter: 740mm, turning length: 3000mm, max. spindle diameter: 1100/min, hollow spindle diameter: 235mm, chuck diameter: 457mm, motor power: 55kW, x-travel: 450mm, z-travel: 3000mm, number of revolver tool slots: 12, quill stock tra ...

Machining Center MIKRON WF 74 CH


X-travel: 900mm, y-travel: 630mm, z-travel: 500mm, clamping surface: 600x1200mm, rotational speed: 20-6300/min, table load: 700kg, tool mount: SK 40, quill stroke: 100mm, swivelling range: ±45°, feed rate: 2-4000m/min, rapid traverse x and y-travel: 10m/m ...

CNC Lathe MORI SEIKI MT 250/ 1500


X-travel: 635mm, y-travel: 110mm, z-travel: 1595mm, turning diameter: 570mm, turning length: 1530mm, swing over bed: 910mm, swing over sledge: 390-850mm, B-travel: 120°, spindle bore: 86mm, rotational speed: 3500/min, quill diameter: 150mm.

Turning and Milling Center MAX MÜLLER MDW 20M


Y-travel: 250mm, turning length: 2960mm, swing over bed: 850mm, turning diameter: 690mm, center width: 3050mm, rotational speed: 1800/min, drive power: 71kW, torque: 6370-7500Nm, quill diameter: 160mm, quill stroke: 160mm, max. workpiece weight: 4t, B-tra ...

Milling and Drilling Machine COLGAR FV 101 TIRT 120


X-travel: 3000mm, y-travel: 2000mm, z-travel: 2500mm, W-travel: 700mm, B-travel: 360°, table dimensions: 1600x1600mm, T-groove dimensions: 28mm, T-groove width: 180mm, table load: 15t, quill stock diameter: 445x445mm, drilling spindle diameter: 130mm, spi ...

Radial drilling machine POLAMCO H. CEGIELSKI GRV-553


Drilling capacity in steel 60 mm Spindle overhang 1600 mm Throat 1700 mm Working area at base 1600x820 mm. Spindle speed 14-1600 rpm. Spindle taper MT5. Quill stroke 350 mm. Quill feed 0,05-2,5 mm/r.

Zyklen-Drehmaschine VOEST-ALPINE STEINEL W 570 E


Max. swing: 570mm, max. turning diameter: 340mm, max. workpiece length: 1000mm, max. workpiece weight: 1t, rotational speed: 1-2500/min, center height: 280mm, center width: 2000mm, quill stroke: 160mm, quill diamter: 70mm, spindle opening: 63mm, length: 2 ...

CNC Universal Lathe MONFORTS KNC 5 1000


Swing over sledge: 290mm, centre width: 1000mm, swing: 550mm, sledge travel: 235mm, soindle diameter: 100mm, max. opening: 70mm, clamping chuck diameter: 200-250mm, rotational speed: 3-2800/min, external quill diameter: 80mm, max. quill stroke: 160mm, int ...

Cylindrical Grinding Machine WMW SA 6UX2000


Grinding diameter: 10-355mm, center height: 180mm, max. grinding length: 2000mm, max. workpiece length: 500kg, workpiece spindle: 11.2-355/min, quill stroke: 40mm, table speed: 0.05-5m/min, longitudinal table travel: 4-2180mm, external grinding diameter:  ...

Cycle Lathe DMT KERN CD 480


Swing over bed/ sledge: 475/ 260mm, flat sledge travel: 260mm, motor power: 25kW, spindle diameter: 115mm, spindle bore: 82mm, rotational speed: 1-3000/min, feed rate: 0.001-1000mm/U, flat/ longitudinal rapid traverse: 5/10m/min, quill diameter: 70mm, qui ...

CNC Lathe GILDEMEISTER CTX 400


X-travel: 210mm, z-travel: 640mm, spindle opening: 62mm, spindle head: 100mm, swing over bed/ sledge: 500/ 290mm, chuck diameter: 200mm, tool chander with 12 slots, quill cone: MK4, turning length: 600mm, spindle bore: 72mm, feed rate: 5000mm/min max., ra ...

Cylindrical Grinding Machine TSCHUDIN HTG 432


Centre height: 100mm, centre distance: 480mm, cross slide travel: 420mm, grinding wheel diameter: 500mm, rotational speed: 65-500/min, swivelling range: 360°, quill stroke: 20mm, grinding spindle power: 5.5kW, workpiece spindle power: 0.55kW, length: 1700 ...

Milling Machine TOS KURIM FGS 63 NCP


X-travel: 1400mm, y-travel: 630mm, z-travel: 600mm, clamping surface: 1800x630mm, spindle cone in the milling head: ISO 50, rotational speed: 2800/min, angular head with quill stroke: 90mm, drive power: 15kW, control: HEIDENHAIN TNC 124, weight: 5.8t.

Milling Machine IMATEC FU-100R


Spindle rotational speed: 35-1500/min, spindle taper: SK 40, feed rate x-/ y-/ z-travel: 750/ 225/ 400mm/min, rapid traverse: 0.8m/min, quill stroke: 133mm, connected load: 4kW, length: 1400mmm, width: 1500mm, height: 1700mm, weight: 1,5t, including tools ...

PLANTS - ROTARY VACUUM-DR 40m


- N°3 Silos Selip in fiberglass Capacity: 40 m³ Storage for BaCl2 solution - N°1 Sedimenter in fiberglass Capacity: 40 m³ - Pump, valves and control panel of the tanks For sale exclusively on the 22-03-2018, 11-00 o’clock at Valleggia di Quilia ...

Vertical Eroding Machine ZIMMER ZK 850


X-travel: 565mm, y-travel: 400mm, z-travel: 415mm, table dimensions: 840x600mm, dielectric over table: 360mm, workpiece weight: 1t, T-slots: 4x10mm, table quill distance: 180-595mm, quill chuck: 3R-Macro, dielectric tank capacity: 400l, filtration system: ...

Horizontal lathe ANGELINI AVM Snupy


1996 Control Fanuc 0T / C Serrapinza X barrefino mm. 60 additional hydraulic chuck diam. 180 8-position turret Tailstock with quill in cycle chip conveyor CAPACITY Swing Ø 200 mm SPINDLE Capacity bar 42 mm Motor power 15 Kw TOWER tool stations  ...

Horizontal lathe Benelli TF 100 CN


1997 Siemens Control Chuck diam. 165 Turret motorizzataVDI 40 to 12 positions C axis Tailstock with quill in cycle chip conveyor Vaulting mm. 500 Turning diameter mm. 250 Turning length mm. 500 Bar capacity mm. 45

Injection molding machines LAGUN FTV4 S-P


Seen: 3 ACEs Table dimensions: 1370X280 mm Z axis stroke: 420 mm X axis travel: 850 mm Y axis travel: 370mm Quill stroke: 120 mm Installed power: 3.6 kW Maximum weight of workpiece: 250 Kg Morse taper: iso 40 Advances: moving lights on all axes  ...

Drilling and Milling Machine LAGUN FTV-2S


X-travel: 768mm, y-travel: 410mm, table dimensions: 1280x256mm, stroke: 560mm, quill stroke: 130mm, rotational speed: 55-4200/min, weight: 1.7t, table feed and hand .

CNC Lathe SAEILO CONTUR Dialog T-52


X-travel: 270mm, z-travel: 1450mm, turning diameter: 520mm max., turning length: 1500mm, swing over sledge: 290mm, chuck opening diameter: 55mm, quill diameter: 80mm, quill stroke: 160mm, rapid traverse x/ z-travel: 3/ 5m/min, feed rate x/ z-travel: 1-300 ...

Scharmann HBM50/95 Horizontal Borer


Make: Scharman Model: HBM50/95 Condition: Used Machine type: Other Location of machine: India Weight: 140000kg Machine is fully functional? Yes Machine Details SCHARMANN HBM50/95 QUILL TYPE HEAVY DUTY HORIZONTAL BORING MACHINE WITH ROTARY TAB ...

Universal Milling and Drilling Machine DECKEL FP3CC


X-travel: 400mm, y-travel: 400mm, z-travel: 500mm, rotational speed: 18-6000/min, tool mount: Sk40, table load: 750kg, feed rate: 2-10000mm/min, rapid traverse: 10000mm/min, quill diameter: 80mm, tool diameter: 100-160mm, tool weight: 10kg max., control:  ...

Drilling and Milling Machine KNUTH BFM 30T


X-travel: 500mm, y-travel: 230mm, rotational speed: 80-2150/min, spindle mount: SK30, table dimensions: 730x210mm, drilling capacity: 32mm max., spindle table distance: 460mm, quill stroke: 130mm, column diameter: 115mm, swing: 202mm, T-slot size: 16mm, l ...

Milling Machine TOS KURIM FGS 63 NCP


X-travel: 1400mm, y-travel: 630mm, z-travel: 600mm, clamping surface: 1800x630mm, spindle cone in the milling head: ISO 50, rotational speed: 2800/min, angular head with quill stroke: 90mm, drive power: 15kW, control: HEIDENHAIN TNC 124, weight: 5.8t.

Milling Machine DECKEL FP4M


X-travel: 500mm, y-travel: 400mm, z-travel: 400mm, quill stroke: 80mm, clamping surface: 274x842mm, feed rate: 6.3-630mm/min, rapid traverse: 1300mm/min, rotational speed: 50-2500/min, tool mount: SK 40, number of T-slots: 4, T-slot distance: 63mm, T-slot ...

Milling Machine DECKEL FP4M


X-travel: 500mm, y-travel: 400mm, z-travel: 400mm, quill stroke: 80mm, clamping surface: 274x842mm, feed rate: 6.3-630mm/min, rapid traverse: 1300mm/min, rotational speed: 50-2500/min, tool mount: SK 40, number of T-slots: 4, T-slot distance: 63mm, T-slot ...

Horizontal Turning Machines (Lathes) MERLI CLOVIS 28-5000


H.Centers:mm.410 D.Centers:mm.5000 Ø Swing on guideways:mm.820 Ø Swing on carriage:mm.595 Ø Swing in gap:mm.1100 Ø Spindle bore:mm.105 Spindle speed: RPM 14-1010 Width of bedways:mm.450 Travel of quill tailsto ...

CNC Horizontal Bed Lathe WIAP DMC4-C


X-travel: 850mm, z-travel: 2000mm, turning diameter: 1600mm, bed length: 4300mm, centre distance: 2000mm, centre height: 650mm, spindle bore: 202mm, swing diameter: 1300mm, quill diameter: 160mm, chuck diameter: 1600mm max., connected load: 63kW, number o ...

CNC Lathe MORI SEIKI SL-15M


X-travel: 220mm, z-travel: 560mm, rotational speed: 5000/min max., number of tool slots: 12, pindle passage: 42mm, chuck diameter: 160mm, quill stock diameter: 75mm, spindle bore: 52mm, length: 2500mm, width: 1400mm, height: 1900mm, weight: 3.3t.

CNC Lathe GILDEMEISTER CTX 400


X-travel: 210mm, z-travel: 640mm, spindle opening: 62mm, spindle head: 100mm, swing over bed/ sledge: 500/ 290mm, chuck diameter: 200mm, tool chander with 12 slots, quill cone: MK4, turning length: 600mm, spindle bore: 72mm, feed rate: 5000mm/min max., ra ...

Lathe MONFORTS RNC 600AC


Spindle head: A8, inner tow bar diameter: 86mm, x-travel feed force: 6,5kN, z-travel feed force: 10.4kN, repid traverse: 18m/min, shaft diameter: 40mm, number of tools: 12, quill diameter: 90mm, quil stroke: 105mm max., quill force: 12.7kN, taper sleeve:  ...

CNC Universal Milling Machine MAHO MH 700 C


X-travel: 700mm, y-travel: 450mm, z-travel: 500mm, table diameter: 630mm, feed rate: 1-3000 mm/min, rapid traverse: 6m/min, quill stroke: 100mm, rotational speed: 20-3150/min, tool mount: ISO 40, table load: 400kg max., spindle power: 8kW, control: CNC 43 ...

Fisher Determinazione HGI


Coal analysis laboratory equipments Hardgrove mill brand: Fisher Model: Coal Grindability test Determination HGI on coal For sale exclusively on next 6 December at 11 to Valleggia of Quiliano For more information contact us at 0307751645.

LECO TGA 701


Coal analysis laboratory equipments Brand name: LECO Termograviometrico scanner model: TGA 701 accuracy: +/-0.02% (ASH) year: 2008 moisture, ash and volatile Analyzer in coal and ash For sale exclusively on next 6 December at 11 to Valleggia of Quiliano ...

LECO AC600


Coal analysis laboratory equipments Calorimeter LECO AC 600 Brand: LECO model: AC600 year: 2011 Calorimeter for the determination of calorific value of coal and OCD For sale exclusively on next 6 December at 11 to Valleggia of Quiliano For more inf ...

LECO AF700


Coal analysis laboratory equipments Brand name: LECO coal ash melting point analysis model: AF700 year: 2009 coal ash melting point Determination. For sale exclusively on next 6 December at 11 to Valleggia of Quiliano For more information contact us at ...

LECO Truespec CHN – S


Coal analysis laboratory equipments Automatic analyser for solid fuels Make: model: LECO CHN Truespec – S year: 2010 total sulfur in ash from coal, filler CHNS elemental analysis For sale exclusively on next 6 December at 11 to Valleggia of Quiliano  ...

ICP - MS autocampionatore Agilent 7700


Laboratory oil analysis equipment – air – water ICP-MS with autosampler Agilent 7700 x Determining metals in wastewater, waste mineralized matrix analysis For sale exclusively on next 6 December at 11 to Valleggia of Quiliano For more information conta ...

Lathe DECKEL FP1


X-travel: 300mm, y-travel: 150mm, z-travel: 340mm, quill stroke: 60mm, feed rate: 5-500mm/min, rapid traverse: 1200mm/min, table load: 300kg max., motor power: 0.59kW, rotational speed: 40-2000/min, spindle power: 1.5-1.9kW, clamping surface: 195x600mm, c ...
Find used machinery dealers in your country