quil used for sale

turning length: 940 mm turning diameter over bed: 330 mm turning diameter over slide rest: 165 mm turning dia. in gap: 450 mm length: 230 mm number of spindle speeds: 65 - 1810 U/min. spindle bore: 38.0 mm tailstock quill taper MT: MK 3 quill stroke: 100 mm spindle taper: DIN 55029, D1-4 total power requirement: 1.5 kW weight of the machine ca.: 460 kg range L-W-H: 1710 x 650 x 1320 mm New price ~ 3.500 euros Special price on request Furnishing: - very handy machine with lead and pull spindle - Ideal for the hobby sector - 3-jaw chuck 160 mm including replacement jaws + lathe chuck protection - fixed bezel - rotating bezel - Quadruple steel holder - chip tray - Splash wall - Bed made of gray cast iron, solid design - Bed guide inductively hardened and ground - Main spindle with Camlock D1-4 mount - Tailstock can be moved +/- 5 mm for taper turning - Spindle bearing with 2 adjustable pre ...

Key data: 900 mm, 500 mm

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamp, control bult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 400,-.

Specifications: Center height: 220 mm Center width: 1000 mm Spindle bore: 55 mm Bed width: 430 mm Speeds, 2 stages: 18 - 1800 1/min Tailstock mount: MK 4 Quill stroke: 190 mm Feed rate: 0.30 - 3.26 mm/rev Dimensions (WxDxH), approx.: 2650 x 1100 x 1550 mm Equipment: - Quick-change holder System Multifix - Bed stop - Coolant device -Mudguard - Turning chuck protection with restart protection

Article number: 07-07-171 Manufacturer: Mikron Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1700x1800x1800mm Weight: approx. 1500kg Digital display: 3-axis active digital display Heidenhain Travel: X-axis: approx. 500mm Y-axis: approx. 500mm Z-axis: approx. 380mm Table clamping surface: approx. 700x500mm Spindle: Speed range: approx. 50-2240 rpm Tool holder: ISO 40 Drive power: approx. 3.5kW Feeds & rapid traverses: in all 3 axes Feed range: approx. 1-630mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Angle milling head with drill quill  Coolant device  Complete documentation  Various tension wrenches  Work light  Various tool holders Other accessories on request Price and other technical data on re ...

Description: Drilling capacity: 40 mm Face milling cutter: 100 mm End mill: 32 mm Projection: 275 mm Max. distance, spindle head to table: 445 mm Mounting cone of the spindle: MK 3 Spindle stroke: 130 mm Diameter, quill: 75 mm Spindle head rotation range: 2 x 90° Diameter of column dovetail guide Total height without base: 1150 mm Total length of the machine: 750 mm Total width of the machine: 1185 mm Machine base: 710 mm Spindle speeds 2-stage motor: 12 Spindle speed range: 50 - 2500 rpm Adjustment travel across the table: 240 mm Adjustment travel along the table: 510 mm Clamping surface of the table: 820 x 240 mm T-slot stone size: 16 mm With accessories as shown in the pictures, including a dividing head (diameter: approx. 300 mm), a shaping angle and various other tools for the milling machine With operating instructions as shown in the pictures Approx. Onsite Dimension. (l x w x h) ...

Weight: 4 T Year: x-travel: 1200 mm quill stroke: mm : digital: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial number: 11166 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 23 A Total power: 16 kVA Control: HEIDENHAIN TNC 426 Tool holder: SK 40 Table dimensions: 900 x 460 mm Table weight: 275 kg Table load: max. 500 kg Number of T-sLot: 7 Distance between the T-sLot: 63 mm Width of the T-Slot: 14 H7 Travel distances: X: 600 mm Y: 450 mm Z: 500 mm Feed rate X-, Y- and Z-axis: 2000 - 10000 mm/min Feed force in all axes: 6000 N Rapid traverse in all axes: 10 m/min Spindle diameter in the front bearing: 75 mm Vertical quill stroke: 75 mm Measuring system: direct measurement X-, Y- and Z-axis Resolution: 0.1 m Angle table dimensions: 900 x 458 mm Number of tools: 34 pieces Magazine spaces: max. 90 mm With free adjacent spaces: max. 125 mm Tool length from spindle nose magazine: max. 250 mm Max. tool weight: 8 kg The machine is equipped with a 30-posit ...

Description: Longitudinal travel of upright X 10,000 ,mm Spindle head vertical travel Y 3,300 mm RAM transverse travel Z 1,100 mm Spindle quill travel W (boring bar) 800 mm Translating travel C 2,000 mm Turntable plate positions B 360,000 n Turntable size 2,700 x 2,700 mm Drilling unit vertical travel V 2,700 mm Drilling unit transversal travel U 500 mm SELCA S4045PD control Serial number 02-021.021 Dig depth 2000 mm z-motion: 1,200 mm, table surface area l x w : 2700 x 2700 mm, control: SELCA 4045PD, power capacity - spindle: 50 kW, weight approx.: 160,000 kg, Approx. Onsite Dimension. (l x w x h): 19,000 x 10,000 x 6,000 mm

Description: serial number: 53183 control: PHILIPS ,432 working hours: approx. 54064 hrs.  , travels: X-axis: 500 mm Y-axis: 400 mm Z-axis: 350 mm quill stroke: 50 mm feed ,rate: 1 - 4000 mm/min. turning speed range rpm: 20 – 5000 rpm rapid traverse: X-axis: 6m/min. Y-axis: 5 m/min. Z-axis: 6 m/min table dimensions: 350 x 660 mm tool taper: ISO40/DIN 69871 total power requirement: 10 kW milling table swivable: table rotation on B axis - table tilt by -30° to +30°  , attention: main drive non functional! z-motion: 350 mm, Read off operating hours: 54,064 h, x-motion: 500 mm, y-motion: 400 mm, control: PHILIPS 432, table surface area l x w : 350 x 660 mm, tool taper: ISO40/DIN 69871, turning speed range: 20 – 5000 rpm, feed range: 1 - 4000 mm/min, rapid motion: 5 - 6 m/min, weight approx.: 2,100 kg, Approx. Onsite Dimension. (l x w x h ...

grinding diameter:250 mm grinding length:630 mm centre height:125 mm control:Siemens S7 swing diameter:280 mm centre distance:630 mm grinding head swivelling:90 ° table swivelabel +/-:+10/-7 ° grinding wheel dia. x width x bore:400 x 40 x 127 mm grinding wheel dia. according abrasion:250 mm max. grinding wheel width:63 mm swing in open rest:70 mm swing in closed rest:70 mm taper bore of workpiece spindle:4 Morse taper of tailstock quill:4 Morse stroke tailstock centers:30 mm clamping force tailstock center:50-1500 s grinding head swivellable +/-:+15/-45 ° output of wheelhead motor:4 kW work piece motor:0,7 hydraulic motor:1,1 kW cool pump motor:0,155 kW lubrication pump motor:0,155 kW electro motor internal grinding:0,75 kW total power requirement:10 kVA weight of the machine ca.:3000 kg dimensions of the machine ca.:L3000/B2300/H1600 mm stepless spindle speed:und Werkstückantrieb M ...

grinding diameter:600 mm grinding length:4000 mm centre height:320 mm max. workpiece weight:3000 (zw. Spitzen) kg max. workpiece weight:6000 (m. Lünetten) kg grinding wheel diameter:760 mm grinding wheel width:100 mm grinding wheel speed:45 m/sec table travel:4400 mm table speed -stepless-:10~6000 mm/min Rotation speed of workhead :8~80 1/min tailstock quill stroke:100 mm taper in tailstock-quill:6 MK spindle drive:22,5 kW Weight approx.:14,1 t dimensions:13000x2900x1800 mm CNC controller:Siemens 828D mit Schleifzyklen open steady:2 Stk./pc live center:2 Stk./pc warranty: None payment: 100% before loading

turning diameter:620 mm turning length:2000 mm control:FAGOR 8055 max. swing over slide:410 mm bed width:350 mm spindle drive:17 kW spindle taper:A2-8 ASA spindle speeds:0-2500 1/min. spindle bore:105 mm tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm rapid traverse x/z:15/12,5 m/min weight of the machine ca.:3,5 t dimensions of the machine ca.:3940 x1350x1810 mm automatic tool changer:PRAGATI; aut. Revolver mit angetr. Stationen DTT80 12 POS. fach tools:1 Satz servo spindle motor:von FAGOR sowie Achsmotoren von FAGOR fixed steady rests:1 Stk. live center:1 Stk. follower rest:1 Stk. 3 jaw chuck Ø:315 (hydr.) mm New CNC lathe KRAFT KT 285/2000 with Fagor 8055. Made in Europe, Picture similiar. For more information please see the attached documents

turning diameter:1010 mm turning length:3000 mm control:Fanuc 0ITF max. swing over slide:718 mm bed width:500 mm spindle taper:A2-11 spindle speeds:0-1400 1/min. spindle bore:130 mm transmission ratio:2 tailstock quill diameter:120 mm tailstock quill stroke:300 mm taper of tailstock quill:6 MK max. length of work piece:5000 mm rapid traverse x/z:10/10 m/min power requirement:22 kW weight of the machine ca.:10.000 kg dimensions of the machine ca.:5325x1800x2230 mm automatic tool changer:12-fach Y-axis:über Werkzeugrevolver Y TBYR250-12 BMT75 mm 3-jaw hydraulic chuck:500 mm CNC controller:Fanuc 0ITF tools:1 Satz fixed steady:Option mm New CNC lathe KRAFT ST 500/5000 with Fanuc Oi TD Made in Europe For more information please see the attached documents

turning diameter:360 mm turning length:1000 mm control:Fanuc Oi-TF turning diameter over bed slide:300 mm max. swing over slide:190 mm bed width:250 mm spindle taper:A2-5 spindle speeds:0-4000 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:15/12 m/min power requirement:7,5 kW weight of the machine ca.:1200 kg dimensions of the machine ca.:2250x1115x1630 mm automatic tool changer:8-fach CNC controller:Fanuc Oi-TF tools:1 Satz foundation bolts:1 Satz New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents

turning diameter:1010 mm turning length:4000 mm control:FANUC OI TF max. swing over slide:718 mm bed width:500 mm spindle taper:A2-15 spindle speeds:0-1400 1/min. spindle bore:130 mm transmission ratio:2 tailstock quill diameter:120 mm tailstock quill stroke:300 mm taper of tailstock quill:6 MK max. length of work piece:4000 mm rapid traverse x/z:10/10 m/min power requirement:22 kW weight of the machine ca.:9500 kg dimensions of the machine ca.:6557x2202x2487 mm max. workpiece weight between centers:8600 kg automatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz coolant system:6 bar New CNC lathe KRAFT ST 500/3000 with FANUC OI TF Made in Europe For more information please see the attached documents

turning diameter:520 mm turning length:500 mm control:Fanuc 0i-TF turning diameter over bed slide:320 mm max. swing diameter:520 mm spindle speeds:4500 1/min. spindle passage:64 mm spindle drive:15/11 kW C-axis:0,001 ° tool turret:12-fach mit BMT-65 RADIAL, VDI40 _ feed stepless:0,001-5000 mm/U travel -x axis:200 mm travel - z:600 mm rapid power traverse in X-and Z direction:30 m/min taper in tailstock:5 MK tailstock quill stroke:100 mm tailstock adjustment:500 mm weight of the machine ca.:4000 kg Overall size:3,6x2,1x2,4 m 3-jaw hydraulic chuck:200mm mit Lufkühler CNC controller:Fanuc 0i-TF + MANUAL GUIDE I + 10.4" LCD Tool setter:manuell c-axis:0,001° tool holder:axial, 2 Stück, BMT-65 tool holder:radial, 2 Stück,BMT-65 hard jaws:1 Satz soft jaw:1 Satz Live center:5 MK bar loader:Schnittstelle vorhanden brand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD  ...

turning diameter:652 mm turning length:2000 mm control:FAGOR 8055i turning diameter over bed slide:455 mm bed width:350 mm spindle taper:A2-8 spindle speeds:30-1700 (3 Stufen) 1/min. spindle bore:80 mm feed stepless:0-5000 mm/min tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm tool post size:25x25 mm power requirement:7,5 kW coolant pump:0.37 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:3920x1605x2014 mm :8605 DIN repeating accuracy:0,01 mm positioning accuracy:0,01 mm turret:4-fach mit Schaftaufnahme (Hersteller Pragati) CNC controller:FAGOR 8055 automatic stepless gear box:3 Stk. electronic hand wheel:für X- und Z-Achse :in deutscher Sprache coolant system:151 L chip conveyor and trolley:Option steady rests:Option different chucks and faceplates:Option New CNC lathe KRAFT ST 285/1000 w ...

grinding diameter:1000 mm grinding length:6000 mm centre height:510 mm max. workpiece weight:1800 (zw. Spitzen) kg max. workpiece weight:7000 (m. Lünetten) kg grinding spindle speed:400-1200 1/min grinding wheel diameter:915 mm grinding wheel width:100 mm grinding wheel peripheral speeds::35 m/sec cross adjustment:autom. 0,001 mm cross adjustment:mit Handrad: 0,001/0,01/0,1 mm table travel:6200 mm table speed -stepless-:10~4500 mm/min Rotation speed of workhead :3~30 1/min tailstock quill stroke:150 mm taper in tailstock-quill:6 MK tailstock adjustment:über Pneumatik tailstock quill adjustment:manuell spindle drive:30 kW Weight approx.:26 t dimensions:17500x3700x1900 mm surface roughness: max. 0.3µm Ra cylindricity:0.002~0.005 mm/m roundness:0.002~0.005 mm CNC controller:Siemens 828D mit Schleifzyklen fully enclosed:Optional open steady:Optional live center:2 Stk./pc warranty: None pa ...

turning diameter:450 mm turning length:1500 mm control:Fagor 8055 oder Fanuc max. swing over slide:260 mm bed width:300 mm spindle taper:A2-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1500 mm rapid traverse x/z:12/15 m/min power requirement:9 kW weight of the machine ca.:1400 kg dimensions of the machine ca.:3300x1215x1750 mm automatic tool changer:8-fach (PRAGATI) CNC controller:Fagor 8055 tools:1 Satz Made in Europe For more information please see the attached documents

turning diameter:1300 mm turning length:5300 mm control:FAGOR 8055 max. swing over slide:900 mm spindle bore:150 mm transmission ratio:2, automatisch schaltend taper of tailstock quill:6 MK automatic tool changer:4-fach elektrisch CNC controller:FAGOR 8055, NEU control cabinet Siemens PLC:NEU New CNC lathe KRAFT ST 500/3000 with FAGOR 8055 Made in Europe For more information please see the attached documents

turning diameter:280 mm turning length:250 mm control:Fanuc 0i TF swing diameter over bed slide:280 mm Bar capacity:44 mm spindle speeds:4800 1/min x-travel:155 mm y-travel:+/-35 mm z-travel:250 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:11/15 kW Machine size (LxWxH):1.842x2.793x2.446 mm machine weight:5000 kg feeds:0.001-500 mm/U c-axis:0.001 ° turret:16-fach, BMT-55 type Y-axis:über Revolver mm hollow chuck:hydr. 200 mm :8 bar tailstock:ohne! brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. unit for chuck with air ...

turning diameter:630 mm turning length:2850 mm control:Fanuc 0i-mate MGI swing diameter over slide rest:350 mm bed width:550 mm spindle nose:D11/1:20 spindle bore:104 mm spindle speeds::17-1000 U/min transmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/min tailstock quill taper MT:5 Morse Quill travel:200 mm diameter of quill:100 mm workpiece accuracy:6-7 ITF x-travel:320 mm z travel:3000 mm chuck size:315 mm dimensions:5200 x 1900 x 1900 mm :6 t power capacity:11 kW CNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 steady rest:2 Stück frequency control main spindel engine:11 kW turret:8-fach Flat Bed CNC Lathe Flat Bed CNC Lathe, CAK63/80 Series CAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petr ...

grinding diameter:600 mm grinding length:3000 mm centre height:320 mm max. workpiece weight:3000 (zwischen Spitzen) kg max. workpiece weight:6000 (m. Lünetten) kg grinding wheel diameter:760 mm grinding wheel width:304,8 mm grinding wheel speed:45 (stufenlos) m/sec table travel:3400 mm table speed -stepless-:10~6000 mm/min Rotation speed of workhead :8~80 1/min tailstock quill stroke:100 mm taper in tailstock-quill:6 MK spindle drive:22,5 kW Weight approx.:13 t dimensions:13000x2900x1800 mm CNC controller:Siemens 840D mit Schleifzyklen Scales:in X-Achse von Heidenhain open steady:optional live center:optional Stk./pc workpiece drive:variable 4 jaw chuck:optional CE-design:verlängert die Auslieferung um ca. 3 Wochen warranty: None payment: 100% before loading

turning diameter:402 mm turning length:750 mm control:FAGOR 8037 turning dia. over face-slide:245 mm turning diameter over bed slide:380 mm bed width:250 mm spindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:750 mm power requirement:4 kW weight of the machine ca.:1050 kg dimensions of the machine ca.:2000x1115x1670 (LxBxH) mm turret:8 fach CNC controller:FAGOR 8037 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents

turning diameter:360 mm turning length:530 mm control:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mm swing diameter over bed slide:360 mm Bar capacity:64 mm spindle speeds:3500 1/min spindle speed:Gegenspindel: 5000 1/min x-travel:230 mm y-travel:±51 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:17 (Hauptspindel) kW spindle drive:5,5/7,5 (Gegenspindel) kW Machine size (LxWxH):3290x2180x2337 mm machine weight:6100 kg c-axis:0.001 ° turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mm hollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 bar hydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor)  ...

turning diameter:402 mm turning length:1000 mm control: 8055 turning dia. over face-slide:245 mm turning diameter over bed slide:380 mm bed width:250 mm spindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:750 mm power requirement:4 kW weight of the machine ca.:1050 kg dimensions of the machine ca.:2250x1115x1670 (LxBxH) mm turret:Multifix CNC controller:FAGOR 8055 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents

turning diameter over bed:650 mm turning diameter over slide:450 mm turning length:1435 mm bed width:350 mm spindle bore:155 mm spindle speed:50-800 (3 stufig, stufenlos) U/min spindle taper:A2-11 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:220 mm tailstock quill diameter:95 mm tailstock quill taper MT:5 MK tool post size:25x25 mm power requirement:7,5 kW weight of the machine ca.:2400 kg dimensions:3020x1140x1770 mm DRO:von FAGOR 3 Achsen Modell 40iTS mit konstanter Schnittgeschwindigkeit fixed steady:Option follower rest:Option tool holder:4-fach 3 jaw chuck Ø:400mm, vorne und hinten (2 Stück), mit Bohrung 155mm, und 2 Satz weiche Backen splash guard:am Schlitten mit Mikroschalter anti vibration pads:6 Stück Factory new center lathe with 2-axis digital display and variable speed and many more. CHARACTERISTICS: Powerful, flexible and productive With ...

turning diameter over bed:1630 mm turning diameter over slide rest:1190 mm turning length:5000 mm centre height:800 mm swing in gap:2100 mm bed width:1000 mm max. workpiece weight:12000 (zw. Spitzen) kg number of spindle speeds:16 4 - 242 U/min spindle bore:120 mm tailstock quill diameter:180 mm tailstock quill stroke:350 mm Weight approx.:22 t total power requirement:ca. 25 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm

turning diameter over bed:2300 mm turning diameter over slide rest:1860 mm turning length:5000 mm centre height:1150 mm swing in gap:- mm length of gap:- mm faceplate:1500 mm bed width:1000 mm max. workpiece weight:zw. Spitzen: 15000kg, m. Lünette: 20000 kg number of spindle speeds:3-300 U/min spindle bore:206 mm tailstock quill diameter:- mm tailstock quill stroke:- mm Weight approx.:26 t spindle drive:50 kW DRO:optional 4 jaw chuck:1500 mm Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm

turning diameter:570 mm turning length:2000 mm control:FANUC O i TF turning diameter over bed slide:490 max. swing over slide:360 mm bed width:350 mm spindle taper:A2-8 spindle speeds:0-2500 1/min. spindle bore:80 mm tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm chuck size:250 mm rapid traverse x/z:15/12 m/min power requirement:11 kW weight of the machine ca.:2970 kg dimensions of the machine ca.:3325x1350x1810 mm automatic tool changer:12-fach, VDI 30 3-jaw hydraulic chuck:250 mm tools:1 Satz New CNC lathe KRAFT KT 285/2000 with Fagor 8055. Made in Europe, Picture similiar. For more information please see the attached documents

turning diameter:450 mm turning length:1000 mm control:FANUC OI TF max. swing over slide:260 mm bed width:300 mm spindle taper:A2-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:12/15 m/min power requirement:9 kW weight of the machine ca.:1400 kg dimensions of the machine ca.:2800x1215x1750 mm automatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz 3 jaw chuck Ø:200 mm live center:4 MK :aus Guss New CNC lathe KRAFT ST 225/1000 with FANUC 0i mate TD Made in Europe For more information please see the attached documents

turning diameter over bed:850 mm turning diameter over slide rest:510 mm turning length:3000 mm travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min metric threading:56,1~120 mm feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0.04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min tailstock quill diameter:120 mm tailstock quill stroke:250 mm taper in tailstock:6 MK main drive motor:15 kW max. workpiece weight between centers:4000 kg Weight approx.:6800 kg machine width/height:1500x1500 mm machine length:5150 mm 4-jaw independent chuck:800 mm steady fixed:Ø40~350 (mit Rolleneinsätzen) mm fixed steady:Ø100~520 (mit Rolleneinsätzen) mm follower rest:Ø30~120 mm multifix tool holder:Größe C Factory new heavy  ...

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:750 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2800 (3 Getriebestufen) U/min longitudinal feed:0,044-0,662 mm/U cross feed:0,020-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW DRO:für 2 Achsen von FAGOR center morse:2 Stück 3 jaw chuck Ø:200 mm Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter:450 mm turning length:1000 mm control:FAGOR 8055 max. swing over slide:260 mm bed width:300 mm spindle taper:A2-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:12/15 m/min power requirement:9 kW weight of the machine ca.:1400 kg dimensions of the machine ca.:2800x1215x1750 mm automatic tool changer:8-fach CNC controller:FAGOR 8055 tools:1 Satz :aus Guss New CNC lathe KRAFT ST 225/1000 with FANUC 0i mate TD Made in Europe For more information please see the attached documents

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:1000 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2800 (3 Getriebestufen) U/min longitudinal feed:0,044-0,662 mm/U cross feed:0,020-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::10-125 mm with live steady:10-80 mm power requirement:4 kW center morse:2 Stück 3 jaw chuck Ø:diverse Größen als Option Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter over bed:502 mm turning diameter over slide rest:310 mm turning length:1500/1000 mm centre height:250 mm bed width:300 mm max. workpiece weight between centres:750 kg :225 kg spindle bore:58 mm spindle turning speed range:85-1250 (3 Getriebestufen) U/min spindle nose:A2-6 longitudinal feed:0,05-0,752 mm/U cross feed:0,022-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:69 mm sleeve conus:4 MK quill stroke:200 mm power requirement:5,5 kW Machine size (LxWxH):(Spw. 1500mm) 3130x960x1550 mm machine weight:2090 kg center morse:2 Stück Brand new Center Lathe KRAFT DLZ 250 Series More information can be found in the appendix

grinding diameter:750 mm grinding length:2000 mm centre height:375 mm grinding wheel size:750x100x305 mm :40-250 mm tailstock-quill conus:Morse 6 table swivable ca.:4° (1:8) turning speed range - workpiece spindle:(stufenlos) 1-50 U/min grinding wheel speed:20-33 m/sec grinding wheel motor:19 kW total power requirement:ca. 41 kW

turning diameter:1010 mm turning length:3000 mm control:FANUC Oi TF mit Manual guide max. swing over slide:718 mm bed width:500 mm spindle taper:A2-11 spindle speeds:0-1400 1/min. spindle bore:130 mm transmission ratio:2 Stk. tailstock quill diameter:120 mm tailstock quill stroke:300 mm taper of tailstock quill:6 MK max. length of work piece:3000 mm rapid traverse x/z:7,5/10 m/min power requirement:22 kW weight of the machine ca.:8050 kg dimensions of the machine ca.:5800x2290x2515 mm turret:Duplomatic DM TR25 with BMT75 (m. Y-Achse) c-axis:kontin. mit separatem Motor 3-jaw hydraulic chuck:500 tools:1 Satz New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TD Made in Europe For more information please see the attached documents

turning diameter:800 mm turning length:3838 mm control:Fagor 8055i max. swing over slide:490 mm bed width:550 mm turning speeds:40-1000 U/min spindle taper:C11 spindle bore:100 mm transmission ratio:4 Stk. tailstock quill diameter:100 mm tailstock quill stroke:240 mm taper of tailstock quill:6 MK :4000 mm x-travel:420 mm z travel:3835 mm chucking diameter:400 mm spindle cone:1:20 rapid traverse x/z:4/8 m/min power requirement:11 (15/30min) kW weight of the machine ca.:6600 kg dimensions of the machine ca.:6310/2000/1800 mm +SPECIAL PRICE+SPECIAL OFFER+ main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China All machines' functionalities will be checked and controlled before loading. The machines can be modified according to CE u ...

grinding diameter:500 mm grinding length:2000 mm centre height:251 mm max. workpiece weight between centers:500 kg workpiece spindle head::5 MK tailstock quill taper MT:4 MK Grinding wheel diameter / width / bore:400/100/127 mm Grinding wheel motor:4 KW Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

turning diameter:300 mm turning length:320 mm control:Fanuc 0i TD MG max. swing diameter:520 mm spindle speeds:4800 1/min. spindle passage:44 mm spindle drive:7,5/9 kW brand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 170/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 4500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 100 mm 7. Bar capacity Ø dia 51 mm) 8. Hydraulic Hollow chuck 8" x 3 jaws 9. Hyd. unit for chuck with air cooler 10. Servo driven turret system 12 stations 11. Manual tailstock stroke 500 mm + quill stroke 100 mm 12. Electrical cabinet with heat exchanger 13. Standard splash guide 14. Coolant unit 15. Transformer (power source 380V) 16. Chip conveyor H=1100 MM with trolley (chain type) 17. Machine color Tongtai white/Dark grey 18. Safety foot switch 19. Tricolor lamp 20.  ...

turning diameter:300 mm turning length:600 mm control:Fanuc 0i TD swing diameter over bed slide:320 mm swing over bed:520 mm bar material dia.:64 mm spindle speeds:4500 1/min. spindle drive:11/15 kW turret:12-fach Tool setter:manuell brand new CNC turning center with Contains: 1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY) 2 X/Z AXIS STROKE 170/600 MM 3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN 4 SPINDLE MOTOR 11/15 KW 5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE) 6 SPINDLE BEARING DIA. F 120 MM 7 BAR CAPACITY DIA. F 64 MM 8 HYD. HOLLOW CHUCK 10" X 3 JAWS 9 HYD. UNIT FOR CHUCK WITH AIR COOLER 10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS 11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM 12 ELECTRICAL CABINET WITH HEAT EXCHANGER 13 STANDARD SPLASH GUARD 14 COOLANT UNIT 15 TRANSFORMER (POWER SOURCE 380V) 16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 17 MACHINE COLOR TONGTAI WHITE/DRAK GRE ...

turning diameter:520 mm turning length:600 mm control:Fanuc 0i TF swing diameter over bed slide:320 mm max. turning diameter:280 mm Bar capacity:51 mm spindle speeds:4500 1/min. x-travel:200 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min tailstock quill stroke:100 mm tailstock adjustment:500 mm spindle drive:11/15 kW Machine size (LxWxH):3,440x1,820x2,380 mm machine weight:4100 kg live center:4 MK turret:12-fach, VDI 40 Boring bar holder:BMT 65 hollow chuck:hydr. 250 mm brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. un ...

turning diameter:520 mm turning length:500 mm control:Fanuc Oi-TF max. swing diameter:520 mm spindle speeds:4500 1/min. spindle drive:11 / 15 kW brand new CNC slant bed lathe with Contains: 1. Control system Fanuc Oi-TF (8,4" LCD monitor) 2. X/Z-axis stroke 170/400 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 KW 5. Spindle speed 4500 rpm (Belt driven type) 6. Spindle bearing dia. 100 mm 7. Bar capacity dia 51 mm) 8. Hydraulic Hollow chuck 8" x 3 jaws 9. Hyd. unit for chuck with air cooler 10. Servo driven turret system 12 stations 11. Manual tailstock stroke 275 mm + quill stroke 100 mm 12. Electrical cabinet with heat exchanger 13. Standard splash guard 14. Coolant unit 15. Transformer (power source 380V) 16. Chip conveyor H=1100 MM with trolley (chain type) 17. Machine color Tongtai white/Dark grey 18. Safety foot switch 19. Tricolor lamp 20. Fanuc warranty (wes ...

:GN-1000 | GN-1250 | GN-1500 | GN-1750 turning diameter:1000|1250|1500|1750 mm turning length:1500/2000/3000/4000/5000/6000/8000 mm control:Siemens 828D turning diameter over slide:830|1080|1330|1580 mm bed width:820 mm spindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mm spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min x-travel:750 mm z-travel:2000/3000/4000/5000/6000/8000 mm rapid power traverse in X-and Z direction:6 m/min servo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mm tailstock quill diameter:200 (295 opt.) mm taper in tailstock:6 MK tool turret:8/10/12 fach tool holder -shaft diameter:32 (40 opt.) mm main drive motor:30 (37 opt.) kW weight of the machine ca.:9/10/11/12/13 t positioning accuracy:+0.01 / 300 mm repeating accuracy:+0,005 mm machine length:5000/6000/7000/8000/900 ...

turning diameter:2000 mm turning length:1500/2000/3000/4000/5000/6000/8000 mm control:Siemens 828D turning diameter over slide:1640 mm bed width:820 mm spindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mm spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min x-travel:750 mm z-travel:2000/3000/4000/5000/6000/8000 mm rapid power traverse in X-and Z direction:6 m/min servo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mm tailstock quill diameter:200 (295 opt.) mm taper in tailstock:6 MK tool turret:8/10/12 fach tool holder -shaft diameter:32 (40 opt.) mm main drive motor:30 (37 opt.) kW weight of the machine ca.:9/10/11/12/13 t positioning accuracy:+0.01 / 300 mm repeating accuracy:+0,005 mm machine length:5000/6000/7000/8000/9000/10000 mm machine width/height:2500 x 2400 mm max. workpiece weight ...

:KTH 500 turning diameter:1010 mm turning length:2000/3000/4000/5000 mm control:Siemens/Fanuc/Fagor max. swing over slide:718 mm bed width:500 mm spindle taper:A2-8/A2-11/A2-15/A2-20 spindle speeds:0-1400/0-1000/0-750/0-560 1/min. spindle bore:130/155/230/310 mm transmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/min rapid traverse x/z:7,5/10 m/min tailstock quill diameter:120 mm tailstock quill stroke:300 mm taper of tailstock quill:6 MK power requirement:22 kW weight of the machine ca.:6400/7600/8800/10000 kg dimensions of the machine ca.:4600/5600/6600/7600 x 2190 x 2315 mm automatic tool changer:8-fach CNC controller:Siemens/Fanuc/Fagor tools:1 Satz CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TD Made in Europe For more information please see the attached documents

:KTH 400 | KTH 500 turning diameter:805 | 1010 mm turning length:1000/2000/3000/4000/5000 mm control:Siemens/Fanuc/Fagor max. swing over slide:515 | 718 mm bed width:425 | 500 mm spindle taper:A2-8 (opt. A2-11, A2-15 oder A2-20) spindle bore:105 (opt. 155/230) | 130 (opt. 155/230/310) mm transmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/min rapid traverse x/z:7,5/10 m/min tailstock quill diameter:106 | 120 mm tailstock quill stroke:215 | 300 mm taper of tailstock quill:6 MK power requirement:17 | 22 kW automatic tool changer:8-fach mit 4-Werkzeughaltern CNC controller:Siemens/Fanuc/Fagor tools:1 Satz :aus massiven Gusselementen CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TD Made in Europe For more information please see the attached documents

:JAP 500 turning diameter:1010 mm turning length:2000/3000/4000/5000 mm control:Siemens/Fanuc/Fagor max. swing over slide:718 mm bed width:500 mm spindle taper:A2-11 (opt. A2-11, A2-15, A2-20) ASA spindle speeds:0-1400 (opt. 0-1000, 0-750, 0-560) 1/min. spindle bore:130 (opt. 155,230,310) mm transmission ratio:2 feed range:0-8500 (Z-Achse); 0-6000 (X-Achse) mm/min rapid traverse x/z:7,5/10 m/min tailstock quill diameter:120 mm tailstock quill stroke:300 mm taper of tailstock quill:6 MK power requirement:17 kW weight of the machine ca.:6400/7600/8800/10000 kg dimensions of the machine ca.:4600/5600/6600/7600 x 2270 x 2290 mm :gem. 8605 DIN automatic tool changer:8-fach (Schaft: 32x32mm und Bohrstange:Ø50mm), Hersteller Duplomatic oder Barufaldi mit 4 Haltern CNC controller:Siemens 828D/Fanuc 0iTF/Fagor 8060T tools:1 Satz gear box:von Barufaldi, 2-stufig spindle:Hochpräzisionsspindel CN ...

turning diameter:620 mm turning length:1000/1500/2000/3000 mm control:Fanuc/Fagor/Siemens max. swing over slide:540 mm bed width:350 mm spindle taper:As-8 spindle speeds:0-2500 1/min. spindle bore:105/155 mm transmission ratio:1 tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:1000/1500/2000/3000 mm rapid traverse x/z:15/12 m/min power requirement:11 kW weight of the machine ca.:2300/2515/3010/3700 kg automatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 310 Series with Fanuc/Fagor/Siemens control Made in Europe For more information please see the attached documents