We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,593 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
New OSTAS profile roller Type OPK-45 Shaft diameter 50mm Hydraulic top roller adjustment Digital readout Can be used horizontally and vertically
used
The hydraulic profile bender PBH 80 is in good technical condition, including a wide range of accessories. Can be seen by appointment.
used
Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.
new
CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg
used
Wire bender OMAS CEB 110 BV in excellent condition
new
Guide profile for slat-band conveyors per m, Versaflex, A06P-3, 65mm, MK, mint condition -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Guide profile, guide rail 65mm wide, 4 pieces 300cm long, 4 pieces 131cm long, 4 pieces 235cm long Material aluminum Incl sliding strips ASL-25-0 HDPE black As good as new! The part was installed in a new plant, which was not put into operation, has minor signs of storage or installation, but is in mint condition. We have the following individual parts for Versaflex hinge conveyors from MK Group in stock: (Please contact me) - Deflection units A06EM, 65mm wide - Guide profile A06P-3, 65mm wide incl. glide bars - Link chain, smooth chain white, A06CH ...
used
Profile bending machine Ercolina Model TOP 030 - Three-phase 6 meters. With complete sets of rollers diam.20/25/30/35/35/35/43/50,8mm and 15/20/22mm hangers.
used
Shaft diameter: 30 mm Foot pedal control Extra roll sets incl.
used
Slide Projector Fabr. LEITZ Type PRADO 500Mash. -No: 270577Outside dimensions approx: 350 x 140 x 250 mmWith- storage case- Operating manual- Guarantee certificate- Aperture for centeringin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Profile projector manufactured by MITUTOYO type PJ 250Technical specifications:rotating screen diameter: 250 mmLens: 10xResolution: 0.001 mmWith- built-in digital LED display for angle measurementused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Including various toolling. Foot control. Manually adjustable
used
Isıtan HPK 90 Hydraulic 4 Rolls Pipe and Profile Bending Machine Machine is like new Shaft Diameter 90 mm Rolls Diameter 260 mm Shaft Lenght 160 mm
used
Profile sanding unit IMA Type: 08.063
used
Radius profile scraper IMA 08.263
used
Radius profile scraper IMA Type: 08.515
used
CONTROLS CNC controls
: neu : ca. 10 Wochen ab Auftrags : Türkei : 51000 € : 933.3 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4770 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MO ...
used
Compressed air supply: 6-8bar, with documentation, without accessories, was maintained regularly, the machine is not functional, the software is defective.
used
Hydraulic machine Can work in horizontal and vertical positions 3 driven rolls Type: 3 rolls Dia rolls: 225 mm Dia of die mandrel: 75 mm Rotationspeed: 7 m/min Motorpower: 4 HP Length : 1000 mm Depth: 980 mm Height: 950 mm Weight: 1200 kg
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 16500 € : 308.55 € : 80 mm : 260 mm : 3 : 7.5 kW : 6 m/min : 80x15 mm / 800 mm, 40x10 : 125x25 mm / 600 mm, 60x8 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 600 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.400 mm, 40 : 80x80x8 mm / 800 mm, 40x4 : 80x80x8 mm / 1.000 mm, 40 : UPN 120 / 800 mm : UPN 120 / 800 mm : IPN 120 / 800 mm : 1150 mm : 1200 mm : 1300 mm : 1600 kg 3 motor driven rolls strong welded steel construction upper roll hydr. adjustable seperate control panel with digital readout horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cutting width: 3900 mm Dimensions (LxWxH): 5100 x 1700 x 3100 mm Height without legs: 2410 mm
used
Profile length: 500-7500mm, max. rotational speed: 22.000/min, the machine should be overhauled.
used
I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.
used
Petewe PFS 2u
used
Connected load: 1.6A, including documentation and some accessories.
used
X-travel: 600mm, y-travel: 475mm, z-travel: 400mm, max. table load: 600kg, connected load: 14kW, controls: UNICON-F, length: 2750mm, width: 2710mm, height: 2720mm, weight: 3.3t, with documentation, machine bed made of micro-granite, drive of the y- and z-axis via ball screw and controllable AC motors.
used
Max. working diameter round/ square/ flat: 30/ 28/ 30mm, length: 550mm, width: 1050mm, height: 1750mm, weight: 700kg.
used
With digital display for roller adjustment, pressure roller supports electro-hydraulically adjustable from the mobile control panel, including digital displays, universal bending roller set, e.g. angle leg outside 100x100x10 to min.1400mm, the machine was never used.
used
X-travel: 3850mm, y-travel: 350mm, z-travel: 280mm, working length: 3850mm, max. feed rate y and z/ x-axis: 30/ 50m/min, positioning accuracy: +/- 0,1mm, milling spindle rotational speed: 1-21.000/min, with electronic three-axis industrial PC-controls of which 2 axes as path control, with color screen and disk drive, barcode scanner and label printer.
used
With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible.
used
Working width: 1250mm, working height: 100mm, with scoring and milling aggregate, with control cabinet, without documentation, manufacturer unknown, either Homag or Bäuerle.
used
Haul-off-saw combination, used Manufacturer: BLAKE Type: 302-1100-140 Year of construction: 1993 Haul-off force: approx. 10,000 N Pad width: 120 mm Effective contact length: 1100 mm Haul-off speed: approx. 0.5 – 10.0 m/min. Caterpillar clamping: pneumatic Drive motor haul-off: approx. 3.5 kW Drive motor saw: approx. 1.5 kW Profile cross-section: approx. 140 x 60 mm
used
Manufacturer: Gietart Type: GW 1530-425 Year of construction: 1979 Location: Papenburg Operating hours: approx. 7,150 blasting hours (from 2001 onwards) Components: 1. Support crane 2x3,2 to. with Truninger profile magnet system (optional) 2. 5 transverse transports approx. 10.50 m 3. 13 m inlet roller table 4. Preheating furnace with 4x80 kW thermal power Bottom/Top 5. Gietart blasting system GW 1530-425, YOC 1979, (W:1,5mxH0,4m), 4 x 18,5kW centrifugal units 6. Gietart Lackiercenter BJ 2000 7. Drying tunnel approx. 10 m 8. Chain conveyor approx. 13 m 9. Color filter Donaldson Torit DFT 3-12 BJ 2000 incl. Precoater 10. Jet filter Donaldson Torit TD 6120 - 0 incl. afterfilter (police filter) for indoor installation 11. 13 m roller conveyor 12. 5 transverse transports approx. 6 m 13. Crane system 2x3,2 to. with Demag magnet system (optional) The complete plant was ...
used
Leitz HM Profile knife head 140x38.5x30 10000 rpm G&-4981
used
see pdf attached
used
pdf attached
used
see pdf
used
Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 2,550 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm
used
Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-4,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 4,800 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 4.00 mm
used
Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-4,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 4,000 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 4.00 mm
used
Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 4,150 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm
used
Used stand guard - (HxWxD) approx. 800 x 94 x 45 mm - for 80 mm profiles Here you will be offered a very well preserved, used stand protection - also called column protection or frame protection. The stand guard in blue design is delivered completely ready for assembly with all required screws and nuts. We also have storage racks, high racks and matching accessories in stock in both used and new condition. If you are interested, we look forward to your call. Properties: - For 80 mm profiles - Length approx. 800 mm - thickness approx. 5 mm - External dimension approx. 94 mm - Internal dimension approx. 85 mm - Thigh size approx. 45 mm - Color: blue -Used - In very good condition Dimensions (approx.): Height: 800 mm External width: 94 mm Internal width: 85 mm Depth (leg measurement): 45 mm Properties: Material thickness: 5 mm Color: blue Conditi ...
used
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 1,300 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
used
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 2,600 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
used
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 4,450 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
used
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 5,400 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
used
Used Sigma Profile S 160 Side Carrier Plins Steel Beam Length approx. 1.670 mm - 160x60x2mm Properties: - Length: 1,670 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,670 mm Information without guarantee You can pick up this item by arrangement in our warehouse in Krefeld. Of course, we also deliver the article to your home. We will be happy to make you an offer. Please understand that we cannot give you any shipping costs without stating the postal code of your delivery address. We work with several carriers, each serving different routes. Your advantage: This allows us to achieve the lowest transport price for you. Please request this before purchasing.
used
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 5,500 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm
used
Used Sigma Profile S 160 Side Carrier Plins Steel Beam Length approx. 1.270 mm - 160x60x2mm Properties: - Length: 1,270 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,270 mm Information without guarantee You can pick up this item by arrangement in our warehouse in Krefeld. Of course, we also deliver the article to your home. We will be happy to make you an offer. Please understand that we cannot give you any shipping costs without stating the postal code of your delivery address. We work with several carriers, each serving different routes. Your advantage: This allows us to achieve the lowest transport price for you. Please request this before purchasing.
used
Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 5,600 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm