profile drilling used for sale

Technical data Table length: 300 mm Table width: 250 mm Magnification: from: 8 x up to: 40 x

Technical data Screen diameter: 600 mm Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 220 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 2000 mm Various accessories: Obscuration device

Technical data Glass table: Length: 175 x 75 mm Various accessories: Episcopy lighting Screen:: Ø 200 mm Exchangeable objectives: 8 x

Technical data Table length: 1000 mm Table width: 300 mm Table load max.: 400 kg Execution: Longitudinal travel (X-axis): 1040 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 410 mm Automatic cross-feed: stepless from: 0.001 mm/min up to: 0.099 mm/min Table speeds: stepless from: 2 m/min up to: 35 m/min Rapid traverse:: 600 mm/min Automatic vertical feed: from: 0.005 mm up to: 5 mm from: 10 mm/min up to: 1000 mm/min Vertical rapid traverse: 1 m/min Diameter of grinding wheel: 400 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 127 mm Grinding wheel speeds: up to: 1500 rpm Voltage 50 Hz 3x: 400 Volt Total power required: 9 kVA Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 2100 mm Height: 2600 mm Various accessories: Coolant system: 140 l Electrical magnetic chuck Length: 800 mm Width: 400 mm Central lubrification

Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 200 mm Microscope stage width: 180 mm Longitudinal way: 40 mm Transversal way: 30 mm Amplifications: 50: 1 x 100: 1 x Change of objective with: Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 280 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2

Technical data Screen diameter: 600 mm Amplifications: 10 20 50 100 Change of objective with: turret Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 220 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 2000 mm Various accessories: Inclinable rotary table: 360°

Technical data Screen width: 300 mm Screen height: 300 mm Microscope stage length: 80 mm Microscope stage width: 70 mm Longitudinal way: 15 mm Transversal way: 15 mm Amplifications: 50: 1 x Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 50 kg Overall dimensions machine: Length: 750 mm Width: 500 mm Height: 700 mm

NOMAPACK® WS is the innovative transport protection for windshields and glass products. The additional inner hole reinforcement prevents sharp edges from piercing the profile and thus provides perfect protection for your product. Patented glass edge protection Unique special profiles reinforced with internal holes Efficient protection against scratches and breakage Applications: Glass edges Windshields Heavy, sharp-edged objects Shipping is paid for by the customer, otherwise we are happy to come and pick it up. If you have any further questions, please do not hesitate to contact us or give us a call. ------------------ NOMAPACK® WS is the innovative transport protection for windshields and glass products. The additional inner hole reinforcement prevents sharp edges from piercing the profile and thus provides perfect protection for your product. Patented gla ...

Technical data Screen width: 550 mm Screen height: 550 mm Microscope stage length: 200 mm Microscope stage width: 200 mm Longitudinal way: 200 mm Transversal way: 50 mm Diameter of the glass table: 240 X 80 mm Amplifications: 10: 1 x manual Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 340 kg

Technical data Screen diameter: 750 mm Microscope stage length: 650 mm Microscope stage width: 230 mm Longitudinal way: 200 mm Transversal way: 85 mm Amplifications: 10: 1 x 20: 1 x 25: 1 x 50: 1 x Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 700 kg Overall dimensions machine: Length: 2000 mm Width: 1400 mm Height: 2000 mm Various accessories: Obscuration device

Technical data Screen diameter: 750 mm Microscope stage length: 650 mm Microscope stage width: 230 mm Longitudinal way: 200 mm Transversal way: 85 mm Amplifications: 10: 1 x 20: 1 x 25: 1 x 50: 1 x Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 700 kg Overall dimensions machine: Length: 2000 mm Width: 1400 mm Height: 2000 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: Elesta Visulesta II E Obscuration device

Technical data Screen width: 560 mm Screen height: 460 mm Microscope stage length: 210 mm Microscope stage width: 150 mm Longitudinal way: 50 mm Transversal way: 30 mm Diameter of the glass table: 80 mm Amplifications: 10: 1 x 20: 1 x Change of objective with: slide Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 1100 mm Width: 700 mm Height: 1900 mm Various accessories: Obscuration device

Key data: 200 mm, 300 mm, 200 mm

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 170 mm Microscope stage width: 150 mm Longitudinal way: 40 mm Transversal way: 15 mm Diameter of the glass table: 85 mm Amplifications: 10: 1 x 20: 1 x 50: 1 x 100: 1 x Change of objective with: slide Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 1100 mm Width: 850 mm Height: 2000 mm Various accessories: Obscuration device

Technical data Screen diameter: 600 mm Amplifications: 10 20 25 50 Change of objective with: turret Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 220 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 2000 mm Various accessories: Inclinable rotary table: 360° Obscuration device Angle measuring device

Control: CNC QUICK (SIEMENS 805, PLC) 2 Achsen/axes/axis Technical data Table length: 800 mm Table width: 300 mm Max. distance from table to spindle centreline: 600 mm Grinding length: 800 mm Grinding width: 300 mm Grinding wheel: Diameter: 250 mm max. width: 70 mm Width: 50 mm Bore: 50.8 mm Table speeds: stepless from: 2 m/min up to: 35 m/min Creep feed: from: 2 m/min up to: 1000 m/min Automatic cross feed: stepless from: 1 mm/min up to: 10000 mm/min Automatic vertical feed: from: 0.001 mm/min up to: 10000 mm/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 6.6 kW Total power required: 22 kVA Machine´s weight about: 4500 kg Various accessories: Coolant system Paper filter facility Oil mist extractor Stabilisation coolant temperature Electrical magnetic chuck Length: 800 mm Width: 300 mm Wheel trueing attachment: TAG Profile wheel trueing attachment: TAD Creep feed Electroni ...

Technical data Screen diameter: 750 mm Microscope stage length: 650 mm Microscope stage width: 225 mm Longitudinal way: 200 mm Transversal way: 80 mm Amplifications: 10 20 30 50 Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 800 kg Overall dimensions machine: Length: 2000 mm Width: 1300 mm Height: 2000 mm Various accessories: Inclinable rotary table: Ø 160 mm Obscuration device

Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 230 mm Microscope stage width: 160 mm Longitudinal way: 200 mm Transversal way: 50 mm Diameter of the glass table: 80 mm Change of objective with: manual Voltage: 220 Volt Machine´s weight about: 280 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 2000 mm

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

Capacity: 0 t Diameter: 0 mm Length: 0 mm CN sections bender Manual and Automatic mode for forming discontinuous radius shapes such as Ovals Volutes Ellipses Parabolas     Horizontal and vertical:H + V  Shaft Ø:               100mm Number of rolls:       3 Horizontal:            Yes  Vertical:              Yes  Resistance moment:     33CM³ Capacity flat:         100x 20 mm Capacity Tube:         114,3 x 3,6 Ø x mm Capacity bar:          90 x 5 mm Capacity T-Profile:    100 x 100 mm Capacity HEA-Profile:  120 x 58 mm Working speed:         2,5 - 5 - 7,5 mm/min. Length:  ...

Maximum Diameter: 300 mm

Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 400 mm Microscope stage width: 130 mm Longitudinal way: 200 mm Transversal way: 40 mm Amplifications: 10 Change of objective with: manual Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 200 kg Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 2000 mm Various accessories: Obscuration device Center mounting attachment

43.5m aluminium profile at a sensational price €17/m excl., Nut 8mm, 40 x 80mm , used Special price! The current new price of a similar product would be € 38/m = total € 1,650. Take advantage of our one-off package price for 43.5m. If you have a VAT number, we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Scope of delivery: 3 x 221cm, 3 x 217cm, 9 x 200cm, 1 x 192cm, 2 x 184cm, 1 x 138cm, 1 x 129cm, 1 x 109cm, 1 x 105cm, 2 x 98cm, Attention: We also have a package of aluminium profiles 80 x 80mm and 40 x 40 mm. No warranty For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect cons ...

Capacity: 0 t Diameter: 120 mm Length: 0 mm MACH - ID 6233 Make: PULLMAX KUMLA Type: Z-60 CNC Control: PS/R - CNC V5 YOP: 1993 Horizontal and vertical    H + V Shaft Ø    120 mm Number of rolls   3 Resistance moment     56 CM³ Capacity flat    125 x 20 x 1300 mm Capacity Tube     115 x 1200 mm Capacity bar       65 x 65 x 1000 mm Capacity T-Profile     120 x 120 x 13 x 1200 mm Capacity HEA-ProfileUNP     240 x 1800 mm Working speed     6,6 / 6,5 M/Min mm Dimensions Length      1.830 mm Width       1.540 mm Height      1.600 mm Weight      4.600 kg

Capacity: 150 t Diameter: 470 mm Length: 300 mm SPECIFICATIONS Hydraulic / Mechanical HydraulicHorizontal / Vertical / or H + VH + V Shaft Diameter ø170 mm Roll diamter ø470 mm Shaft length300 mm Working speed M/Min.1/8 M/Min Capacity HEB 160 x 160 x 15 x Diam = 1600 mm Capacity Flatt 150 x 25 x Diam = 1500 mm  Power  16 DIMENSIONS Length  3400 mm Width  3390 mm Height  2800 mm Angle 150 x 150 x 16       Ø 1.500Angle 140 x 140 x 15       Ø 1.400T       120 x 120 x 14       Ø 1.200T       160 x 160 x 15       Ø 1.600Flat   150 x 25            &nbs p; Ø 1.500

Capacity: 0 t Diameter: 400 mm Length: 180 mm

Capacity: 0 t Diameter: 0 mm Length: 0 mm SPECIFICATIES Werking Hydraulisch / Servo / Mechanisch  Mechanical Horizontaal en of verticaal  Hor. As diameter Ø200 mm  Rol diameter Ø350 mm As lengte in mm    630 mm Werk snelheid in M/Min.   4.5 - 9 M/Min Buig capaciteit  IPN  120 x R 2500 mm Buig capaciteit  HEB220 x 22 x R 3500 mm Buig capaciteit  Buis  1 33 x 6,0 mm Vermogen in Kw   15 kW kW AFMETINGEN Lengte 2100 mm Breedte 2000 mm Hoogte 2100 mm  

Manufacturer Elumatec Model SBZ 122 Machine has been revised Machine is in good condition

Akyapak APK 240 Profile Pipe Bending Machine Tools are included Machine is in good working condition

Akyapak 38 3D Tube and Profile Bending Machine 16,25 and 30 mm tools are included

3D CNC Pipe and Profile Bending Machine Machine used only 1 month Machine is like new condition Up to 40 mm

Machine will be sold with all tools from 32 mm to 63 mm Mandrel lenght : 2500 mm

Capacity: 0 t Diameter: 145 mm Length: 0 mm Make Comac Galileo 4 Type Galileo 40 Year 2011 Profile bender comac galileo 40 Outside diameter max. (mm)Section modus 6 cm3 Inside diameter max. (mm)Shaft diam = 45 Max. pipe length (mm)Roll diam = 145 Max. angleSpeed = 3,7 M/min Wall Thickness (mm)Tube 70 x 2 x 2000 Flatt 60 x 10 x 600 mm Bar 35 x 35 x 600 mm Manipulator Hor & Vert  

Akyapak APK 121 Profile Bending Machine Machine is in very good condition Machine has pulling tool Max. section modulus cm3 : 120 Motor Power : 15 KW Rolls diameter : 390 mm Shaft diameter : 120 mm Bending speed : 6m/min

Capacity: 360 t Diameter: 140 mm Length: 0 mm Make Roundo R 5 S Type R 5 S Year 1989 Section modulus 50 cm3 Outside diameter max. (mm)Top shaft = 140 mm Inside diameter max. (mm)Lower shaft = 120 Max. pipe length (mm)Rolls = 360 Max. angle Power = 11 kW Wall Thickness (mm) Weight 4000 Kg Tube = 142 x 1.800 mm HEA = 140 x 900 mm Some tooling  

Akyapak APK 121 Profile and Pipe Bending Machine All tools are included Shaft diameter : 120 mm Bending speed : 6 m / min Motor power : 11 Kw

Davi Profile Bending Machine Machine is in good condition year 2015

Sahinler HPK-200 Profile Bending Machine Machine is in excellent condition Roll diameter : 200 mm Working speed : 2-5 mm Engine power : 30 KW

Model 2050 Power Hp 30 Serial number 20701 Made in Italy Central shaft 150 mm, 2 lateral shaft 120 mm

The line in good condition. The dowstream equipment made by company UNIPLAST. The line was produced PVC profiles for roller-shutter system.

infrared heater for PVC profile bending and all eqipment for bending. 220w and 3kw with this equipment you are able to bend PVC profiles, glaslists, mullions etc. set includes: Infrared heater, working table, 20 conductors for different pvc profiles.

Capacity: 0 t Diameter: 42 mm Length: 3000 mm Max.Tube Ø:        42mm Min. Tube Ø:       6mm Max. Wall thickness:2,5 mm Max. Bending radius:270mm Min. Bending radius:25mm Max. bending length:3.000mm 3e dimsion bending:360,000 mm/min. Power:             5.5kW Length:            4.700 mm  Width:             1.300 mm  Height:            1.600 mm  Weight:            3.750 kg 

Grinding area: X-axis grinding length: 1,000 mm Z-axis grinding width: 400 mm Y-axis grinding height : with smartLine Basic (grinding wheel D = 300 mm) 500 mm on the work table/with smartLine Kombi (grinding wheel D = 400 mm) 500/700/950 mm on the work table - 420/620/870 mm on magnetic plate Table load: 750 kg on the work table/525 kg on magnetic plate Drive element: ball screw Drive motor: AC servo motor, adjustable Measuring system: absolute, rotary encoder Resolution: 0.001 mm Travel path: 1,190 mm Feed: 0.01 - 30 m / min Grinding path adjustment: via setting buttons on the control panel (xpressCube / -Pro) or direct value entry (840D) Machine control: Siemens 840D sl Main machine dimensions (standard version): Width: 4,100 mm Depth: 2,250 mm Height: 2,350 mm (2,650 / 3,050 mm with Smart N Kombi) Machine weight: approx. 5,400 kg

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

Bending machine and core extractor. Guaranteed excellent condition and operation, also different types of rollers and cores. year 1994

Used SGP EGB 401 Profiles for corrugated sheet metal Profiles for corrugated sheet metal Complete with reel and unloader

Akyapak APK 61 Profile Bending Machine Machine is in good condition

Akyapak APK 101 Profile Bending Machine Machine is in good condition

Akyapak APK 81 Profile Bending Machine All maintenance has been done recently Machine is in good working condition