We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,558 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Surface grinding machine from Ziersch & Baltrusch in good condition Sanding area: 450 x 200 mm Weight: 1600 kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-way combined model 210 SUPER 11 -Pressure force: 40 tons -Drive power: 3/2.2 kW 2800/1400 rpm -Applications: punching, shearing, cutting, notching -Footswitch: 2 -Length stop: Electric contact stop, adjustable up to approx. 1 m -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1620/1350/H1740 mm -Weight: 1323 kg
used
Key data: 35 mm, 32 mm, 120 mm
Specifications: Weight approx. 1.2 tons Drive power 7.5 kW Projection punch 310 mm Table size 700 x 600 mm Height approx. 1.9 m Width x depth approx. 1200 x 600 mm Performance: Hole punch 550 kN , projection 0 mm , punch 30 mm in 15 mm Flat steel shears : 320 x 13 mm Notching device with rectangular tool up to 10 mm Round steel 35 mm Square 32 mm Angle steel 120 x 13 mm
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-fold combined model 210/13 on a rotating machine base -Pressure force: 70 tons -Drive power: 4/5 kW 1450/2900 rpm -Throat: 610 mm -Applications: punching, shearing, cutting, notching -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1865/1205/H1990 mm -Weight: 3580 kg
used
Profile milling machine Bäuerle - Cross section milling machine Type: PM 510 Machine No. 126/91 Year of construction: 1991 Table size 1250 x 410 mm Tool span 510 mm Tool flight circle diameter max. 250 mm Milling height max. 250 mm Milling depth 65 mm Milling spindle diameter 40 mm Table height 870 mm Motor power 18.5 kW, 380 V, 50 Hz, 35 Amp. Working cycles per minute max. 6 Operating pressure max. 6 bar Air consumption 140 l/min. Feed speed 0 – 4.5 m/min. Revolutions per minute at flight circle diameter 180 mm 6000 rpm Revolutions per minute at flight circle diameter 200 mm 4800 rpm Suction nozzle diameter 160 mm with 16 mini tine milling cutters 15 mm cutter width on 500 mm total width with instruction manual Weight: 780 kg Machine dimensions L 1250 mm x W 1270 mm x H 1600 mm
used
ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service
used
Punching force: 1000 kN (punches e.g. 40 mm in 22 mm material), with search device via foot switch for punching Projection: 340 mm Cuts 400 x 20 mm or 500 x 15 mm on flat steel shears Support table with stop on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price
used
5-axis plasma profile and tube cutting line Year of manufacture: 2005 Profile capacity: 12000x1000x500 mm - Tube: ø 508 mm Thickness: 40mm Entrance sliding bench: 12000 mm 5-axis cutting and beveling robot Exit sliding bed: 12000 mm` FAGOR-CNC Camera control system Plasma source ESAB precision plasmarc 450 400A SIDEROS ECOLINE suction system Very good state
used
Bending length 8200 mm Bending depth 1500 mm bending capacity 2 mm autom. depth stop: 8 - 1500 mm max. Opening width of the upper beam: 200 mm Adjustment range of upper beam: 6 mm Bending angle 0-140 Weight: approx.7000 kg Control: Duscher Controlling Machine outside dimensions: 9350 x 2300 x 1950 mm
used
ELB Perfect BD 10 SPS, built in 2003, grinding area 1000 x 400 x 400 mm, the machine was overhauled in 2012 and equipped with the new ELB Easy Grind control, accessories: Electric Perm magnetic clamping plate 1000 x 600 mm, Automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter, suction. The machine is functionally tested and can be viewed under power at our site, we are also happy to take over the installation and training on site.
used
Inv. Num. : 7366 Type: Hydracrop 70- SD Producer: GEKA Created: 1993 Parameters: Power consumption: 9 kW Impact neck: 500 mm Machine weight: 2400 kg Dimension: 1300 x 2100 x 1800 mm Equipment: 2 foot pedals
used
The machine is in good technical condition. Number of pulleys: 3 pcs Standard pulley diameter: 150 mm Shaft diameter: 45 mm Spacing of side shafts: 250-610 mm Base size: 883 x 625 mm Working height: 966 mm Dimensions L x W x H: 860 x 955 x 1250 mm Weight: 440 kg By prior arrangement, the possibility of a tour in progress.
used
Profile ring bending machine Make O.L.B. Machinery Type RBM 3/60 SA Year of construction 2015 Shaft ø 60 mm max. bending roller ø 215 mm Bending capacity max. - square 50 x 50 mm Bending capacity max. - flat 80 x 15 or 120 x 25 mm Bending performance max. - angle 70 x 70 x 7 mm Bending capacity max. - round ø 50 mm Bending capacity max. - round ø 100 x 2 mm Number of driven shafts 3 Total power requirement 2.6 kW Machine weight approx. 1.2 t Dimensions of the machine L x W x H 1.2 x 0.85 x 1.53 m - all 3 shafts driven - Absolutely new condition Accessories 3 sets of bending rollers
used
SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)
new
With this rotator, the workpiece can be fixed and rotated in the correct position without a crane. By using the traditional positioning can be replaced. Occupational safety and treatment are optimized and cycle times are reduced. In the best case, the time requirement can be reduced by up to 20%! Includes wired remote control and foot pedal. The device has a master-slave function, which allows several driven units to be synchronized with each other. This can be important if later the capacity should be increased. When not in use, you can simply put the device in the corner and save space. The device is easy to transport to external workstations.
used
Measuring microscope, universal workshop measuring microscope, microscope, profile projector, measuring projector -Manufacturer: Mitutoyo, profile projector measuring projector -Type: PJ-300 -Magnification: up to 100X -Accessories: see photos -Dimensions: 690/480/H1040 mm -Weight: 113kg
used
Key data: 40 mm, 300 mm, 120 mm
Punching force: 55 ton Punching capacity: Ø 40 in 10 mm steel Projection: 250 mm Scissors: 120 x 120 x 10 mm angle steel 90º 300 x 15 mm flat steel 40 mm round steel Notching LxWxD: 90 x 42 x 10 mm Equipped with: - Electric length stop 2000 mm - Various accessories - 2 stations machine Country of origin: Spain Motor power: 5 kW Machine LxWxH: 1670 x 1160 x 2090 mm Machine weight: 1400 kg
used
Description: SPECIFICATIONS Character: Hercules Type: BO 230 Year built: 1967 Pipe roll diameter: ø290 mm Outer diameter: ø130 mm With various attachments weight approx.: 2,200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,800 mm
used
Description: SPECIFICATIONS Character: Haeusler Type: HPR 10 Coker round: 89x5 mm - diameter 600 mm Solid round: 65 mm - diameter 600 mm Solid square: 50x50 mm - diameter 500 mm Solid rectangle difficult side: 90x15x10 mm - diameter 900 mm Corner iron outside: 90x90x11 mm - diameter 900 mm Angle iron inside: 70x70x10 mm - diameter 900 mm T-profile outer edge: 100x100x11 mm - diameter 1,000 mm T-profile inside edge: 70x70x10 mm - diameter 900 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,400 x 1,800 mm
used
Description: SPECIFICATIONS Character: Boldrini Horizontal: Yes Roll length: 650 mm Machine weight: 5,000 kg weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,600 x 2,100 mm
used
Approx. Onsite Dimension. (l x w x h): 800 x 800 x 1,100 mm, weight approx.: 80 kg
used
Digital display: 2 axes Grinding area: 600 x 250 mm Electro-permanent magnet: 600 x 200 P=4 mm Table load without magnet max.: 250 kg Distance between table and spindle centre: 500 mm Column elevation: 120 mm Overhead dresser dresser Dressing Amount Compensation Automatic Grinding spindle motor: 2.3 - 9.3 kW Grinding spindle speed: 1,000 - 4,000 U-1 Grinding spindle speed control Grinding wheel dimensions A-Ø max x width max x bore: 250x25x50.8 mm Table Clamp Preparation of extraction without suction device Belt filter basins Flanges Grinding wheel Documentation Actuators Voltage: 400 V / 50 Hz Total connection: 10 kVA Machine weight approx.: 2.000 kg Approx. space: 2,600x1,800x2,300 mm
used
Hydr. comb. Sectional steel shears with hole punch Specifications: - Flat steel shears: - Knife length 420 mm - Cutting capacity, flat up to 400 x 18 mm - Profile steel bar shears: - Angle steel 120 x 10 mm - Square steel / round steel 30 / 32 mm - Notching device: - Sheets up to 13 mm - Latch width / latch depth 52 / 70 mm - Hole punch: - Punching force 800 KN - Projection 250 mm - Punches in steel up to e.g. 31 mm Ø in 18 mm or 25 mm Ø in 20 mm - E. footswitch - Drive 400 V / 4.0 kW - Space requirement approx. W 600 x H 1700 x D 980 mm - Weight approx. 1200 kg -with: - E. footswitch - E. Stroke - Various punches with die - Stop support table - Separate tool cabinet
used
Specifications: Punching force: 35 t Projection: 145 mm Flat steel: 150 x 13 mm / 360 x 5 mm Angle iron: 75 x75 x 8 mm Hole punch: ø 25 x 12 mm / ø 30 x 10 mm Rated current: 6.9 A Connection: 400 V Weight, approx.: 500 kg Dimensions (WxDxH), approx.:750 x 980 x 1500 mm Equipment: - Punch / die for slotted hole - Foot control
used
Description: Machine number: 3100-175638 Operating voltage: 380 V Frequency: 50 Hz Grinding wheel diameter: up to 175 mm With optical magnification of 20x and 50x Incl. 2-axis digital readout from the manufacturer HEIDENHAIN Approx. Onsite Dimension. (l x w x h): 2,500 x 1,600 x 1,700 mm, weight approx.: 2,000 kg
used
Description: Includes: Accessories (see pictures) Approx. Onsite Dimension. (l x w x h): 1,200 x 900 x 2,000 mm, weight approx.: 500 kg
used
Inv. Num. : 7471 Type: UPFS 150/88 XYZ Producer: DOEBELI Created: 1991 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 h Equipment: Filtration Coolant tank
used
Inv. Num. : 7472 Type: UPFS 150-117 Producer: DOEBELI Created: 1995 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 mm Equipment: Filtration Coolant tank
used
Edge sanding belt KS10: Yes; Chamfer and radius milling unit: Yes; Profile Grinding Wheel Unit: Yes; Machine Length: Machine Width: Weight: 800kg;
used
Technical data approx.: -Mot. Driven Upper Roller -Manual. Infeed of the middle roller - Both lower rollers can be adjusted horizontally - Shaft diameter approx. 60 mm - Effective shaft length approx. 120 mm - Working speed in one stage - Bending capacity approx. : - - L. and T – iron outside at R 1200 mm 70 x 7 mm - - L – Iron Inner R 1200 mm 75 x 10 mm - - Flat bar flat R 450 mm 100 x 15 mm - - Flat bar upright R 700 mm 60 x 10 mm - - Square bar R 450 mm 30 x 30 mm - - Tubes with special tool R 900 mm 50 x 5 mm -with: - Standard bending roller set - Drive 400 V / 3 kW - Weight approx. 1200 kg - Space requirement approx. W 900 x H 1500 x D 1200 mm
used
Sectional steel shears, Mas. No. 4423251690035 See photos
new
: neu : 2024 : 9718 : prompt, Zwischenverkauf v : Türkei : 9500 € : 196.65 € : 1 : 50 mm : 152 mm : 162 mm : 3 : 1.1 kW : 4,5 m/min : 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm : 950 mm : 1500 mm : 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
dimensions of the machine ca.: xx m amplification -fold: xx diameter: xx mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
The profile bending machines of the KPB series combine high bending performance with modern mechanical engineering and powerful hydraulics. They can bend medium and heavy steel profiles with great precision. A high drive power as well as the hydraulically adjustable bending rollers make the entire profile bending machine series a high-performance solution for metal construction, locksmithing and general mechanical engineering. These machines are also used in the production of roofing, greenhouse construction, advertising technology and the furniture industry. - Shafts Ø 50 / 40 mm - Rollers Ø 152 / 162 mm - Bending speed 3.3 m/min - All 3 reels driven - Hardened rollers and shafts - Hydraulic roller infeed - Horizontal and vertical machining possible If you are interested, we will be happy to send you our complete data sheet.
new
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
used
Description: Shaft diameter: 30 mm Standard diameter of the rollers: 118-148 mm Number of drive rollers: 2 weight approx.: 170 kg, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,600 mm
used
Description: Cross table 340 x 150 mm With comprehensive operating instructions Approx. Onsite Dimension. (l x w x h): 700 x 450 x 700 mm, weight approx.: 30 kg
new
: neu : 2024 : 9730 : Mai 2024, Zwischenverkauf : Türkei : 5800 € : 120.06 € : 50 mm : 155 mm : 2 : 1.5 kW : 4,5 m/min : 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm : 750 mm : 1450 mm : 390 kg 2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: Ja : Stanzkraft 800 kN frequency: 50 Hz current: 17/11 A voltage: 220/380 V round bar steel: 32-17 mm square edge steel: 30-18 mm : 100 x 10 mm flat steel: 350 x 16 mm throat: 200 mm work height max.: 1107 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1200 x 700 x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Sanding width: approx. 40 mm Table dimensions: 400 x 400 mm Approx. Onsite Dimension. (l x w x h): 900 x 600 x 1,400 mm, weight approx.: 150 kg
used
Description: Technical data: Round steel 27 mm Square steel -- mm Angle steel 100 x 10 mm Flat steel 10 mm Punching pressure 40 t weight approx.: 2,800 kg, Approx. Onsite Dimension. (l x w x h): 700 x 800 x 1,800 mm
used
Description: Round steel 30 mm Square steel 120 x 8 mm Angle steel 30 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 1,500 x 1,800 mm, weight approx.: 400 kg
used
Description: Round steel 30 mm Square steel 150 x 8 mm Angle steel 90x8 / 50x6 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,800 mm, weight approx.: 400 kg
used
Description: Flat steel scissors: Knife length: 220 mm Sheets up to: 11 mm Flat steel up to: 120 x 13 mm Profile steel scissors: Angle iron up to: 80 x 8 mm T-iron up to: 80 x 8 mm U and I steel up to: 120 mm Number of strokes: approx. 55 / min. Steel bar shears: Round steel up to: 32 mm Square steel up to: 30 mm Notcher: Sheets up to: 10 mm Latch width up to: 40 mm Latch depth up to: 80 mm Hole punch: Punching capacity: approx. 35 t = 25 Ø x 11 mm / 20 Ø x 13 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,800 mm, weight approx.: 900 kg
used
Description: Travel - x 8300 mm Travel - y 950 mm Travel distance - z 700 mm BWO CNC900 control Profile length 8,000 mm Profile width 300 mm Profile height max. 300 mm Spindle speed 1 - 24,000 Drive power 100% ED 10.00 kW Drive power 40% ED 11.50 KW Tool holder HSK-E50 Feed X-axis 1 - 80,000 mm/min Feed Y-axis 1 - 60,000 mm/min Feed Z-axis 1 - 30,000 mm / min. A - axis +/- 90 ° Tool changing device 9 + 1 Cutter diameter 9x 75 mm Cutter length max. 9x 150 mm Saw blade diameter 1x 350 mm Total power requirement 25.00 kW Description: With BWO CNC900 ETH control unit with RC910 control panel, OMLAT high-frequency drilling spindle, 8 multifunctional clamping vices Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 3,000 mm, weight approx.: 13,000 kg
used
Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price
used
Profile milling cutters D = 125 x 50 x 30mm HS G&-5071-M36lJ
used
Description: Machine no. 4014 SIN840D control x- travel , 10000 mm y- travel , 1000 mm z- travel , 500 mm Profile length 7,200 mm Profile width 300 mm Profile height 300 mm Workpiece dimensions max. 8,000 x 1,000 x 300 rpm Spindle speeds - continuously variable 1 - 24,000 rpm Drive power 15.00 kW Feed X / Y axis 1 - 60,000 mm / min. Feed Z-axis 1 - 20,000 mm / min. B - axis +/- 180 ° C - axis 360 ° Tool holder HSK-A50 Tool magazine: 24 Tool length - max. 240 mm Tool diameter 95 mm Tool diameter with 2 free spaces 200 mm Saw blade diameter max. 350 mm Working area 7,200 x 300 mm Description: 5-axis high-speed machining centre with SIEMENS SINUMERIK840D control system, RECKERTH high-frequency spindle, 8 carrier units, each with a pneumatically actuated clamping device, arranged in the Y-direction and in the X-direction X-direction via a programme-controlled positioning a ...
used
Description: Max working width 300 mm Max. machinable height 130 mm Gluing System PUR Max. machining width 300 mm Max. working height 130 mm Pressure rollers yes no. rollers 1 roller diameter 100 Edge coil magazine yes no. positions 1 Premelter for polyurethane glue yes Premelter for polyurethane glue MITSU Lamps to preheat the surface yes Lamps to preheat the surface 4 Top presser with idle wheels yes Control system SIEMENS SIMATIC PANEL TOUCH Safety standard CE mark yes Total installed power 34 Kw Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Gluing System PUR Pressure rollers yes Premelter for polyurethane glue yes Premelter for polyurethane glue WPR Safety standard CE mark yes Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg