profile drilling used for sale

Description: - End milling machine for aluminum profiles - Serial number 9000575 - Milling capacity 250 x 120 mm - Vertical stroke approx. 110 mm - Motor power 0.75 KW - Rotational speed 2800 rpm Approx. Onsite Dimension. (l x w x h): 1,200 x 750 x 1,300 mm, weight approx.: 160 kg

Description: With used replacement blades Cutting width 45 mm Shaft height 60 mm Approx. Onsite Dimension. (l x w x h): 200 x 200 x 100 mm, weight approx.: 10 kg

Description: Profile grinding wheel, hold-down device, CNC mounting shaft HSK 63 F In addition, unused slip rings Approx. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 10 kg

Description: As diameter: ,30 100x40 mm Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Description: Size 120x40 mm n = Max 8000 r/min for profile knives 40x4 mm and 50x4 mm incl. 12 different exchangeable profile knives/counter knives Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Description: Size 100x40x30 mm N = Max 7600 - 10800 r/min for profile knives 40x4 mm and 50x4 mm incl. 24 different exchangeable profile knives/counter knives Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Description: Size 120x40 mm n = Max 8000 r/min for profile knives 40x4 mm and 50x4 mm incl. 12 different exchangeable profile knives/counter knives Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Universal edge sander, the edge sander can be used for a variety of sanding jobs. You can call or write to us. We can speak and write German and Russian. You can also send messages in English

grinding length:2500 mm grinding width:700 mm workpiece height:730 mm table-size:2500 x 700 mm spindle drive motor:105 kW spindle turning speed range:50 - 3000 U/min grinding wheel width x diameter:550 x 360 mm grinding wheel peripheral speeds::35 m/sec grinding wheel hole diameter:203,2 table feed:10 - 35000 mm/min weight of the machine ca.:15 t total power requirement:150 kW dimensions of the machine ca.:8,5 x 4,2 x 3,2 m Machine with SIEMENS 840 D CNC control for 3 AXIS - automatic cutting force control I-Konstant - coolant device with 5000 ltr. tnak, paperband filtration, recooling, cleaner nozzle, chanel flashing - profile dressing device table mounted - profile pre-setting device - splash housing with sliding doors and conector for exhauster - electronic handwheel

grinding length:2500 mm grinding width:700 mm workpiece height:730 mm grinding range:2500 x 700 mm spindle drive motor:105 kW spindle speed::50 - 3000 U/min grinding wheel width x diameter:550 x 360 mm grinding wheel peripheral speeds::35 m/sec grinding wheel hole diameter:203,2 table feed:10 - 35000 mm/min weight of the machine ca.:16 t dimensions of the machine ca.:11 x 4,5 x 3,4 m total power requirement:150 kVA Machine with SIEMENS 840 D CNC control for 3 axis and various grinding programms WinWop - automatic cutting force regulation (I-Konstant) - coolant device with 5000 ltr. tank complete with paperband, liquid cooler, cleaning nozzle, stream washer and automatic nozzle position adjustment - profile grinder device table mounted with diamond wheel - pre-profile dressing device - complete splash housing with doors and connector for exhauster - electronic handwheel

Automatic line for the production of sandwich panels of the LL-2000 brand of the P-SYSTEMS plant (Czech Republic), 2003. The line is designed for the production of wall and roof sandwich panels with mineral wool and polystyrene foam insulation. The manufacturing process is automatic. Requirements for raw materials for sandwich panel sheathing - thickness 0.4 ... 0.6 mm .: - sheet steel galvanized The production process is carried out automatically (with the exception of the laying of insulation and the preparatory process). Completeness of the line, technical characteristics: - Unwinding device - 2 pcs. - Profiling area. - Table for supplying insulation. - Glue application and distribution device. - Steel strip heating section. - Pressing device. - Transverse movable cutting device. - Line control system. Line productivity per shift (8 hours) 1000 sq.m. The maximum spe ...

CONTROLS   CNC controls SIEMENS SINUMERIK WORKING RANGE SURFACE GRINDING   grinding length: 880 mm   grinding width: 510 mm TABLE (SURFACE GRINDING)   table surface (left-right): 800 mm   table surface (front-back): 430 mm   workpiece load (max): 800 kg MAGNETIC TABLE   length: 800 mm   width: 400 mm SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1500 /min   spindle revolutions (max): 3500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 210 mm   diameter (max): 400 mm   borehole: diameter: 127 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   mains power supply: 30 kVA DIMENSIONS / WEIGHTS   space requirements -left/right-: 3150 mm   space requirements -front/back-: 2350 mm  & ...

CHARACTERISTICS STRETCH-STRAIGHTENING   force: 500 kN   Working length: 13000 mm   center height: 250 mm   stroke: 1000 mm max. stretching length: 13'000 mm max. stretching length:  3'000 mm jaw width: 160 mm jaw opening: 0-100 mm Torque: 600 Nm Rotation angle: +/- 90 degrees Rotation speed standard: 1 rpm Rotation speed fine: 0.25 rpm Stretching speed: 10.8 mm/sec Rapid speed in working direction: 106 mm/sec Rapid speed in return for releasing: 93 mm/sec Toothed rack pitch: 250 mm Jaw confirmation: 5-6 kgf/cm2 (pneumatic) Mandrel confirmation: 5-6 kgf/cm2 (pneumatic)

A complete sizing line is available, max. workpiece dimensions: 2500x500x30mm, includes alignment station SAG RULLIERA INTR. SEZION, longitudinal milling Gabbiani TKM.72 S, number of units: 4, power: 5.5/5.5/7.5/4kW, belt conveyor SAG, cross processing Gabbiani TKM. 72 S, power: 4/4/5.5/5.5kW, turner SAG, cross conveyor SAG TRANSFER CINGHIE RIBALTATORE, collecting station (hopper) SAG RULLIERA CON TRAMOGGIA, film machine BVM SM 6015 L, shrink tunnel BVM SC 6030 D, palletizer Sacot SCA 01 SPEC, the machine was used for profiling floorboards.

Specifications: Grinding width: 40 mm Table: 400 x 400 mm Dimensions set-up, approx.: 900 x 600 x 1400 mm Weight, approx.: 150 kg

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

Boom drilling machine KNUTH type KAB16 Masch. No. 44715 Year of construction 1987 Drilling capacity in steel 16 mm Drilling capacity max. 23 mm Spindle holder MK 2 Pinol stroke 80 mm Projection 550 mm Spindle speed 290 - 2330 rpm 12 steps Clamping surface 650 x 310 mm Distance between drilling spindle Clamping surface max. 890 mm Column diameter 102 mm Motor power 0.55 kW Mains connection 400 volts, 50 Hz Spindle speed via 12 V-belt steps - Drill head height adjustment via hand crank - Drill head swivels +/- 90- Drill head rotatable on the column and on the boom arm Space requirement L x W x H 1030 x 400 x 1000 mm Weight 140 kg very good condition; used

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Double-sided double-spindle drilling and grooving machine Balestrini Pragma Top Characteristic Overall dimensions, mm - 1600х1600х1300 Power, kW - 4,5 Machine weight, kg - 1500 Drill diameter, mm - 16 Table height, mm - 950 Distance from the table to the spindle, mm - 100 Clamp - pneumatic

Econiche data: Drilling rig 345-31 WHT-No. 147-0338 SNr. 103 563 Linear unit M4: Fanuc, type: Beta is 4/4000 HV A06B-0064-B203 Motor: plug version with resolver Resolver line and motor cable: PM505CBL2040B 10 319V 50Hz 2.3A 3.5Nm , 3000 rpm Drill tape M3: Astro, type: ASM 46 SG10 3-400V 50/60Hz 65/60mA 4/4,8min-1 Spindle drive M1: Bonfiglioli, type: BN 132 S 6 No. 802002 Cod: 8D62030016-519951 230V / 460V 13.5A / 7.8A 50H7 940 min' 3kW cosQ 0.76 IP 55 IsKI.F Lifting drive M2: Fanuc, Type: Beta 22/2000 HV is A06B-0086-B503 Motor: in plug version with resolver and brake Resolver line and motor cable with brake: PM505CBL2020B 5 448V 50Hz 3.4A 22Nm, 2000 rpm Insert tape M10 : SEW / Maschienenbau Kitz, Type: WF 10DT56LA/TF Product number: 01.1230640901.0001.08 230V / 400V 50Hz 0.80/0.46A 0.12kW 1600 rpm cos 0.68 Delivery belt M11: SEW / Maschienenbau Kitz, Type ...

Brand: Bavelloni Type: Drilling machine Model: Trapano VT Construction year: 1992

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

Floor Type Milling and Boring Machine SKODA Model: WD 250 Offer ID: 452 Manufacturer: SKODA Model: WD 250 New in: 1969 Condition: very good, under power,being serviced Localisation: Poland - We are owner this machine ! Technical details Rotary table: 2 000 x 2 000 mm Floor plates (8 psc): 3 000 x 1 500 mm Spindle diameter: 250 mm Bed haight: 600 mm Bet width: 2 400 mm X Travel: 5 000 mm Y Travel: 4 000 mm Main spindle intersection: 250 mm Main spindle ball metrical: 140 mm Maximum moment on the main spindle axis: 300 000 kgcm Intersection of the rapid spindle: 125 mm Ball in the rapid spindle: 430 mm Maximum depth of boring with main spindle: 2 250 mm Maximum depth of boring with the rapid spindle: 630 mm Feed of the spindle's crosshead: 500 mm The deepest position of the main spindle axis over the bearing: 1 100 mm Dimensions: 12 500x6 000x9  ...

Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

UNION Model: BFT 90/3 Manufacturer: UNION - Germany Model: BFT 90/3 Year of manufacture: 1982 Condition: very good, complete, no broken or missing parts Technical details: Spindle diameter: 90 mm Spindle taper: Morse'a 5 Working surface: 1400 x 1250 mm X axis travel: 1600 mm Y axis travel: 1250 mm Z axis travel: 1475 mm W axis travel: 710 mm Max. load on table: 2500 kg Installed power: 23 kW Machine weight: 9300 kg

CNC Boring Machine SKODA Model: W 160 Year of manufacture: 1968 Condition: very good, complete, in 2008 completely modernized with ball screws,linears, control system and full machine review - geometry CNC Control: CNC SIEMENS 840 Equipment: Universal head, Rotary table, additional equipment Technical details: Table size: 11 025 x 4 000 mm Working travel: X axis travel: 10 000 mm Y axis travel: 3 150 mm Z axis travel: 1 600 mm B axis travel: 360 Rotary table: 2 000 x 2 000 mm Max weight on rotary table: 20 000 kg Spindle diameter: 160 mm Spindle r.p.m: 800 r.p.m Tool shank: MORSE'A 6 with reduction on ISO 50 Machine weight: 80 000 kg

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover

Drilling capacity in steel (diameter): 60 mm projection: 2000 mm kl. / gr. Distance between Mounting surface and drill Quill: 525/1690 mm Quill stroke: 310 mm spindle mount MT: 5 table size: 1900 x 1100 mm speed: 30-1250 rpm feeds: 0.08-1.35 mm spindle drive: 5.5 kW weight: 5700 kg space requirement: 2975 x 1100 x 2950 mm

Spindle: MK 3 Dauerbohrleistung: 25 mm standard ALB ear performance: 30 mm of thread cutting performance: M 20 depth: 125 mm projection: distance 260 mm spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm overall height: 1,855 mm weight: 250 kg motor pole shift bar: 0.8/1.5 kW spindle speeds continuously variable range: 80 - 1440 min-1 range: 180 - 3,200 RPM digital display for speed as standard.

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

Dauerbohrleistung in St 60: 18 mm standard ALB ear performance: 20 mm thread cutting performance: M 12 spindle: MK 2 drilling depth: 100 mm projection: 225 mm from spindle/table: 55 up 880 mm table area: 450 x 315 mm column diameter: 90 mm overall height: 1,745 mm weight: 170 kg frequency-controlled three-phase motor: 1.5 kW spindle speeds continuously variable range: 100 - 2,000 rpm range: 200 - 4,000 min-1 digital display for speed as standard.

Dauerbohrleistung in St 60: 35 mm standard ALB ear power: 40 mm thread cutting performance: M 30 spindle: MK 4 feed adjustable: 20-400 mm / min drilling depth programmable: 175 mm projection: 300 mm spindle/table: 70-830 mm surface: 550 x 400 mm column diameter: 120 mm total height: 1,980 mm weight: 450 kg motor pole shift bar: 1.5 / 3.0 kW spindle speeds continuously variable range: 120-2,500 rpm spindle speeds stepless area B: 60-1,200 RPM

Opti B17Pro Bench drilling machine 5 speeds Drilling capacity in steel 16 mm Motor 500W 230V Spindle retainer MK2 Drilling table Tilt/Swivel +-45° / 360° Net weight: 39kg Table length: 235 mm Table width: 220 mm G & pieces 3003171SE

Accessories available. Fehlmann stage KS 240 Drilling tailstock digitized Table size 530 240 mm Route x 280 mm Y way 180 mm Speeds, electronic, adjustable with potentiometer 132-4500 RPM

Table size 430 200 mm X trail 200 mm Y way 150 mm Speeds continuously variable motor 2 speed. 132-4600 RPM Throat depth 230 mm Quill stroke 110 mm

Duration / ALB ear power 25/30 mm Thread cutting capacity Max M20 Spindle MK III Drilling depth 125 mm Throat depth 260 mm Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 0.90/1.45 kW Spindle speed with idle, stepless 125-4000 1 / min in 2 levels I: 125-2000 1 / min II: 250-4000 1 / min The levels change via belt apportionment Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Speed 45-4000 RPM Fehlmann table 380 x 750 mm X/Y/Z 420/300/500 mm Motor-driven height adjustment of the drilling head

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

BERNARDO COLUMN DRILLING MACHINE TYPE B 610 PRO -MK4 -80/2130 t/m -2 am motor -Draait right en linksom -Table 385 x 335 mm -Table is draaibaar -Noodstop -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Pillars - or drilling machines Smoothness thanks to polished splined hubs High concentricity by hardened and ground spindle Large speed range Heavy, solid casting Drilling depth stop adjustable with millimetre scale Low maintenance gearbox with grease lubrication Electrical connection: 400 V / 3 pH 50 Hz Engine power: 1,1 / 1,5 kW Drilling capacity in steel: Diameter 28 mm Spindle retainer: MK 3 Projection/Quill stroke: 260 mm / 127 mm Spindle speeds/levels: 75 - 2900 min-1/8 Table length x width / T-slots: 376 x 394 mm / 14 mm Column diameter: 92 mm Dimensions Lxwxh: 670 x 550 x 2, 080mm Net weight: 184 kg G & pieces 3034230

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

PIVOT AND DRILL FITTINGS Attacks left and right 2200 ´ mm Motor 400 V