profile drilling used for sale

: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min voltage: 400 V / 50 V adjustment movement hydraulic up to: 120 mm motor speed: 1400 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1200 x 800 x 1750 mm Horizontal and vertical position, optionally two or three driven rollers, standard roller set, lateral guide rollers, foot pedal with safety button, according to CE, operating instructions, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile length: approx. 1,950 mm CS-Sigma.: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Note: The angles shown are not part of the offer. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own fleet (without discharge)

: neu : ca. 8 Wochen ab Auftragse : Spanien : 170 to : 40x40x4 mm : 65x65x7 mm : 2 : 25/5 bzw- 18/7 mm : 350 to : 5 kW : 265 bar : 70 l Automatic line for punching and sharing angle STANDARD EQUIPMENT: INFEED/OUTFEED CONVEYERS idle rollers 3 conveyers each 3,3 m for feeding angles up to 12 m length WORKING UNITS: ROLLER FEED MEASURING SYSTEM feed by roller wheel (brushless moto),rotary encoder no time loss for measuring feeding speed variablefrom 0 to 36 m/min positioning accuracy in X axis0,25 mm + 0,15 mm per meter the last 250 mm can not be used PUNCHING UNIT (2X) 1 punching unit per leg 1 punch per punching unit adjustable back mark by tooling fromfrom 20-40 mm hydraulic downholder direct access for quick change ofpunches and dies SHEARING UNIT shearing power 350 kN single cut direct access for quick change ofshearing blade hydraulic downholder CNC CONTROL OMRON PLC colour touchscree ...

Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile length: approx. 1,650 mm CS-Sigma.: ca, 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Note: The angles shown are not part of the offer. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Included in delivery: 01x C-Profile, used Material color: sendzimir galvanized Total length: approx. 5,605 mm Profile abbreviation: C 200 x 80 x 35 mm Material thickness: approx. 2.00 mm Hole diameter: approx. 13 mm Weight / pcs approx. 38,75 Kg Note: - Since these are used goods, damage, Holes, welds, etc. rust deposits may be present. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shel ...

: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

flat steel: 350 x 10 mm round bar steel: 35 mm square edge steel: 30 mm L-beam: 80x80x8 mm hole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm : 500 kN throat: 177 mm : 34 (Hub 15mm) blade length: 356 mm engine output: 3.0 kW weight: 950 kg dimensions: 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min adjustments: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1,2 x 0,8 x 1,75 mm The PB 50-3 H is a hydraulic profile bending machine: we produce thisprofilebender in Europe and deliver it directly from our stock. This hydraulic profile bending machine has a shaft diameter of 50 mm and 3 driven rolls. It is easy to switch between working with two or three driven rolls via the gearshift on the side of the machine. Operation of the profile bender is done by a foot pedal and with the pedals you choose the turning direction of the rolls. Our PB 50-3 H has a handpump to adjust the position of the upper / centre roll with hydraulics. The position of this upper roll can be read out on a scale and on the digital display (0,1 mm). Furthermore, our Profi Bend machines can work in  ...

: 50 mm roll diameter: 148 mm revolutions per minute: 13,6/27,2 U/min total power requirement: 1/1,4 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 800x920x1450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aluminum profile machining center, make ELUMATEC type SBZ 130/01Masch. -No: 20040 Ser. -No: 943029, year of construction 1994Technical specifications:Max. Machining length X: 7200 mmMax. Machining width Y: 485 mmMax. Machining height Z: 340 mmTravel speed: 30 m / min.Travel accuracy: 0.1 mmMax. Spindle speed: 6000 rpm.Tool holder: BT 30Y and Z feeds: 18 m / minFeed X: 45 m / minTool length max .: 200 mmTool diameter max .: 80 mmTool changer with: 8 tools.Tool change time: 1.2 secDrive power: 5.5 kWExternal dimensions L x W x H: 8840 x 2400 x 2300/3250 mmWith- 3-axis CNC control- 8 workpiece clamps- 3 angle milling heads- 3 milling holders- 1 tap headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always ...

: 75 (800) mm : 60 (750) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 100 x 11 (1000) mm Axis diameter: 80 mm work speed: 6,0 m/min Tool diameter: 242 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 (500) mm : 45 (500) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 80 x 9 (800) mm Axis diameter: 60 mm work speed: 5,0 m/min Tool diameter: 195 mm total power requirement: 3 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t square edge steel: 35,0 mm round bar steel: 40,0 mm L-beam: 120 mm punching cross-cut in cmm: 28 in 15 mm throat: 220 mm flat steel: 300 x 15 mm oil volume: 45 ltr. total power requirement: 4,0 kW weight of the machine ca.: 1.250 kg. Dimensions (HxWxD): 1510 x 590 x 1570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 120 x 15 (d 750) mm I-beam section - upend: 60 x 10 (d 800) mm L-beam: 50 x 5 (d 1200) mm round material: 35,0 (d 800) mm bar material dia. max.: 70 x 2 (d 1200) mm square material: 50 x 40 x 3 mm bending speed: 4,3 m/min roll diam. toproll: 155 mm bore: 50,0 mm total power requirement: 1,5 kW weight: 320 kg range L-W-H: 730 x 830 x 1350 mm Furnishing: - Machine base - horizontal and vertical work use - foot switch - standard rollers (divided) - 2 driven rollers - CE mark / declaration of conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - upend: 120 x 25 (d 1600) mm bar material dia. max.: 140 x 3 (d 3000) mm L-beam: 100x100x10 (d 1600) mm square material: 140 x 40 x 3 (d 4000) mm I - beam section - flat steel: 200 x 35 (d 1000) mm bar material - diameter: 70,0 (d 800) mm tool taper: 100,0 mm 0: 315 mm turning speeds: 5,4 m/min. total power requirement: 11,0 kW weight: 2.240 kg range L-W-H: 1500 x 1650 x 2100 mm Furnishing: - hydr. Roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard set of rollers, hardened - Hydraulically adjustable lateral straightening rollers - mobile control panel - 3 driven rollers - digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - Operating instructions in German Special accessories included in the price: - hydraulic side roller adjustment  ...

I-beam section - flat steel: 220 bei Dm 1200 mm I-beam section - upend: - mm angular steel - leg outwards: 110x110x14 bei Dm 1000 mm angular steel - leg inwards: 80x80x10 bei Dm 1000 mm flat steel flat: 100 x 20 bei Dm 1000 mm T-steel / side out: 120x120x13 bei Dm 1200 mm U-iron on the x-axis: 22 bei Dm 1200 mm pipes: 102 x 6 bei Dm 900 mm round material: 75 bei Dm 700 mm square material: 60 x 60 bei Dm 600 mm bending speed: 3,5 m/min No. - Rolls: 3 Drive: 7,5 kW shaft diameter: 125/135 mm weight: 6,4 t dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m Condition: ready for operation: Electric 380 Volt: Set of standard rolls: I + H Motorized adjustable rollers: Control panel: Central lubrication: autom. Rolls for round material: 100 mm Machine manual: Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers,  ...

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amplification -fold: 100 diameter: 560 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: 350 t dimensions of the machine ca.: 650 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm roll diameter: 148 mm : 13,6-27,2 Upm engine output: 2,2 kW turning speed range - power take off spindle: 13 U/min dimensions of the machine ca.: 750 x 1450 x 800 mm Features: 2 rollers powered settings readout on scale easy reach emergency button supplied with standard roller set optional: various roller sets (available on request) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 40 x 40 x 5 mm U-iron on the x-axis: 50 x 25 x 5 mm roll diameter: 98 - 148 mm speeds of rolls: 20 U/min Speed Speed applicator roll: 5 U/min diameter of roll spindle taper: 30 mm total power requirement: 1,1 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 1000 x 620 x 1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen diameter: 200 mm Longitudinal way: 25 mm Transversal way: 25 mm Diameter of the glass table: 60 mm Amplifications: 50: 1 x Lighting: Diascopy lighting Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 30 kg Overall dimensions machine: Length: 500 mm Width: 450 mm Height: 500 mm

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 560 mm Screen height: 460 mm Microscope stage length: 210 mm Microscope stage width: 150 mm Longitudinal way: 50 mm Transversal way: 30 mm Diameter of the glass table: 80 mm Amplifications: 10: 1 x 20: 1 x 50: 1 x 100: 1 x Change of objective with: slide Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 1100 mm Width: 700 mm Height: 1900 mm Various accessories: Colour filter Obscuration device

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 130 mm Microscope stage width: 130 mm Longitudinal way: 40 mm Transversal way: 30 mm Diameter of the glass table: 100 mm Amplifications: 50: 1 x Change of objective with: manual Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 200 kg Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 2000 mm

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Table length: 400 mm Table width: 200 mm Measuring range: longitudinal: 150 mm transversal: 100 mm Magnification: from: 20 x Nonius turnable: 360 ° Digital readout number of axis:: 2 Longitudinal travel: 150 transversal travel: 100 Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 30 kg Overall dimensions machine: Length: 700 mm Width: 500 mm Height: 700 mm Various accessories: Digital readout number of axis:: 2

5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...

Workpiece width maximum: 0 mm Workpiece length: 0 mm Grinding machine type: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 800 mm Table width: 300 mm Max. distance from table to spindle centreline: 600 mm Grinding length: 800 mm Grinding width: 300 mm Grinding wheel: Diameter: 250 mm Width: 50 mm Bore: 50.8 mm max. width: 70 mm Table speeds: stepless from: 2 m/min up to: 35 m/min Creep feed: from: 2 m/min up to: 1000 m/min Automatic cross feed: stepless from: 1 mm/min up to: 10000 mm/min Automatic vertical feed: from: 0.001 mm/min up to: 10000 mm/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 6.6 kW Total power required: 22 kVA Machine´s weight about: 4500 kg Various accessories: Coolant system Paper filter facility Oil mist extractor Stabilisation coolant temperature Electrical magnetic chuck Length: 800 mm Width: 300 mm Wheel trueing attachment: TAG Profile  ...

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 170 mm Microscope stage width: 150 mm Longitudinal way: 40 mm Transversal way: 15 mm Diameter of the glass table: 85 mm Amplifications: 10: 1 x 20: 1 x 50: 1 x 100: 1 x Change of objective with: manual Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 280 kg Overall dimensions machine: Length: 1100 mm Width: 850 mm Height: 2000 mm Description: Objectifs 10x, 20x, 50x, 100x

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 200 mm Microscope stage width: 200 mm Longitudinal way: 40 mm Transversal way: 40 mm Diameter of the glass table: 100 mm Amplifications: 10: 1 x Change of objective with: manual Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 350 kg Overall dimensions machine: Length: 1100 mm Width: 840 mm Height: 1600 mm

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 130 mm Microscope stage width: 130 mm Longitudinal way: 40 mm Transversal way: 30 mm Diameter of the glass table: 100 mm Amplifications: 17,5 20 25 50 100 Change of objective with: manual Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 200 kg Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 2000 mm

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Diameter of the glass table: 508 mm Amplifications: 10 20 50 100 Overall dimensions machine: Length: 1050 mm Width: 700 mm Height: 1600 mm

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Circulary table diameter: 140 mm Measuring range: longitudinal: 50 mm transversal: 20 mm Magnification: from: 50 x Nonius turnable: 360 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 30 kg Overall dimensions machine: Length: 450 mm Width: 340 mm Height: 450 mm Various accessories: Lamp

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 230 mm Microscope stage width: 160 mm Longitudinal way: 200 mm Transversal way: 50 mm Diameter of the glass table: 80 mm Amplifications: 10 20 100 Change of objective with: manual Voltage: 220 Volt Machine´s weight about: 280 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 2000 mm

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen diameter: 300 mm Microscope stage length: 520 mm Microscope stage width: 280 mm T-channel width: 6H7 mm Longitudinal way: 250 mm Transversal way: 125 mm Table load max.: 20 kg Glass table: Length: 330 mm Width: 200 mm Amplifications: 10 Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 100 kg Overall dimensions machine: Length: 1400 mm Width: 600 mm Height: 1300 mm Various accessories: Obscuration device

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Circulary table diameter: 170 mm Digital readout number of axis:: 2 Longitudinal travel transversal travel Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 40 kg Overall dimensions machine: Length: 500 mm Width: 450 mm Height: 600 mm Various accessories: Lamp

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 550 mm Screen height: 450 mm Microscope stage length: 170 mm Microscope stage width: 150 mm Longitudinal way: 40 mm Transversal way: 15 mm Diameter of the glass table: 85 mm Amplifications: 10: 1 x 20: 1 x 50: 1 x 100: 1 x Change of objective with: slide Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 1100 mm Width: 850 mm Height: 2000 mm Various accessories: Obscuration device

Enlargement: 0 x Table length: 0 mm Table width: 0 mm

Workpiece width maximum: 0 mm Workpiece length: 0 mm Grinding machine type: 0   CNC Brand: 0 CNC Model: 0 Control: ELB STC touch screen Operating hours: 1000 Technical data Table length: 1360 mm Table width: 590 mm Axial motion: Longitudinal travel (X-axis): 1100 mm Cross travel (z-axis): 560 mm vertical travel (Y-axis) Table load max.: 1000 kg Grinding length: 1000 mm Grinding width: 600 mm Grinding height over table: 640 mm Grinding wheel: Diameter: 400 mm Width: 100 mm Bore: 127 mm Grinding wheel speeds: stepless from: 1000 rpm up to: 3000 rpm Table speeds: stepless from: 2 m/min up to: 30 m/min Automatic cross feed: from: 0.001 mm/min up to: 2000 mm/min Automatic vertical feed: from: 0.001 mm/min up to: 1500 mm/min Vertical rapid traverse: 0.6 m/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 15 kW Machine´s weight about: 6300 kg Various accessories: Paper filter facil ...

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Table length: 350 mm Table width: 210 mm Glass table:: 160 Measuring range: longitudinal: 100 mm transversal: 50 mm Magnification: from: 10 x Overall dimensions machine: Length: 500 mm Width: 500 mm Height: 600 mm Various accessories: Digital readout number of axis:: 2

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 560 mm Screen height: 460 mm Microscope stage length: 210 mm Microscope stage width: 150 mm Longitudinal way: 50 mm Transversal way: 30 mm Diameter of the glass table: 80 mm Amplifications: 10: 1 x 20: 1 x 50: 1 x 100: 1 x Change of objective with: slide Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 1100 mm Width: 700 mm Height: 1900 mm Various accessories: Obscuration device

Workpiece width maximum: 0 mm Workpiece length: 0 mm Grinding machine type: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 4000 Technical data Table length: 800 mm Table width: 430 mm Max. distance from table to spindle centreline: 735 mm Table load max.: 800 kg Grinding length: 880 mm Grinding width: 510 mm Grinding wheel: Diameter: 400 mm Width: 100 mm Bore: 127 mm Grinding wheel speeds: stepless up to: 35 m/min Table speeds: stepless from: 1 m/min up to: 40 m/min Creep feed: from: 0.1 m/min up to: 1 m/min Automatic cross feed: stepless from: 0.1 mm/min up to: 5000 mm/min Automatic vertical feed: from: 0.1 mm/min up to: 5000 mm/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 15 kW Total power required: 30 kVA Machine´s weight about: 6500 kg Overall dimensions machine: Length: 2350 mm Width: 3150 mm Various accessories: High pression colan ...

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 560 mm Screen height: 460 mm Microscope stage length: 320 mm Microscope stage width: 215 mm Microscope stage diameter: 380 mm Longitudinal way: 100 mm Transversal way: 100 mm Diameter of the glass table: 160X160 mm Amplifications: 20 50 100 Change of objective with: turret Lighting: Diascopy lighting Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 400 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: Elesta Obscuration device Angle measuring device

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Table length: 350 mm Table width: 210 mm Glass table:: 160 Measuring range: longitudinal: 100 mm transversal: 50 mm Magnification: from: 10 x Overall dimensions machine: Length: 500 mm Width: 500 mm Height: 600 mm

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

– Capacity 50 tons – Hydraulic – 4 stations – Foot control – Electric backgauge - Emergency stop Ebhzaoz – With 10 stamps (8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm) – Peddinghaus punching recording – Documentation – 400 V