profil used for sale

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

Głowice do wytłaczania - pakiet 19 sztuk różnych narzędzi, m.in. Kalibrator głowicy + płyty Głowica + kalibrator 2 x 130 Głowica 250 mm + kalibrator Austria Głowica + kalibrator Duża głowica rozszerzająca + kalibrator Mała głowica rozszerzająca + kalibrator Głowica + kalibrator dla Soffit 2 x 160 głowic Głowica parapetu 260 mm cena za wszystkie narzędzia 60.000 Euro.

Qty. 1 Second-hand aluminium profile lamination line Mfc.: S.I.M. PACK Srl Model: SIRIO PROFILI TA/200/2S Built: 2011 Stopped: 2026 Voltage: 400 V, 3 ph., 50 Hz The machine applies the protective film simultaneously on 2 flat surfaces of profiles with a max. width 200 mm and height 200 mm and the cut of the film between the profiles is automatic. The machine in made up of a strong electric welded iron tubular frame on which there are: One unit for the dragging of the film on the upper and lower surface composed by a vertical column bearing no. 2 opposed rubbered rollers. No.1 Pulling unit composed by no. 2 rollers position at the exit of the machine. No. 1 Automatic cutting activated by pneumatic cylinder with vertical movement. No. 2 Idle roller table 2.5 m long, with PVC covered rolls and alignmentlocator to get a correct Alignment of the material to be coat with the prot ...

Profile bending machine manufactured in 1993. This Müller Profilierung 3 features a maximum strip width of 300 mm and can handle material thicknesses up to 8 mm. It includes 13 forming stands on interchangeable plates and 4 hydraulic punching units. If you are looking to get high-quality profile bending capabilities, consider the Müller Profilierung 3 machine we have for sale. Contact us for further details.

Manufacturer: Delle Vedove, Type: Profilleistenschleifmaschine, Monting of the machine: 8 Schleifaggregate, Program: yes, Axis control: yes, Work piece width min-max mm: 10-250, Min.-max. workpiece height in mm: 6-80, Work piece length min-max mm: 300, Sanding width mm: 2500, Sanding hight mm: 80, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Surface sanding units: 2, Profile sanding units: 6, Monting of the machine: 8 Schleifaggregate,

Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1500 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1150 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1220x1300 mm Weight: 1050 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile grinding machine Brand Ecoline Type: Profilsand 6 New machine The customized solution for sanding individual parts such as for window profiles or moldings. Flexibility also in the choice of material and surface to be sanded: The Profilsand 6 can process different surfaces (impregnated, primed...) and types of wood (solid wood, veneered parts, MDF, etc.). The machine is equipped according to your specifications. Basic machine - Machine bed made of steel frame to ensure high stability. - Ground and therefore absolutely flat surface of the machine bed. - All movements of the aggregates are carried out on linear guides with recirculating ball bearings to ensure durability, precision and strength. - Feed via a driven conveyor belt. - Adjustable support rollers for supporting the parts between the lower units - Pressure rollers are positioned at the top alo ...

Here is a list of available equipment for pipes and profile extrusion from EU constructors., New equipment is constructed by renouned German Constructors, Used equipment is in good working conditions, Check the PDF list below and revert to us with your inquiries., Be very specific in yuoe questions and please don not forget to give your full contact, yourname, your Company name, Country, Whatsapp and phone no. Well be happy to assist you.

used Herburger roll forming machine, infinitely variable adjustment via Quickset system from sheet width 280 – 840 mm, : latest technology, hardened and with Drive elements in the rollers (rubber inserts) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width 280 - 840 mm Sheet thickness steel 0.8 mm Sheet thickness aluminium 1.0 mm Sheet thickness stainless steel 0.6 mm Machine weight 290 kg Dimensions 1100 x 1100 x 950 mm Total power requirement 230 V Colour: grey/anthracite Profile height 25 mm Machine number A 24 15 34

Hello , We are selling a complete profiling line Profi Metall including bending machine and packaging line from 2015 the plant is controlled and was used for the production of lamps/people parts. in the attachment the desired documents. • Band Dimensions: 90.2mm x 0.6mm • Roll diameter: 66mm - 112mm • Roll width: 15mm - 61.5mm • Bore diameter of the profile rollers: 27mm

used Herburger roll forming machine, infinitely variable adjustment via Quickset system from sheet width 280 – 840 mm, : latest technology, hardened and with Drive elements in the rollers (rubber inserts) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

4 Belt grinding unit 2 grinding brushes Carpet length mm: 5500 Carpet width mm: 400 (extendable) Weight Kg: 800

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Hint: No screw material included. Technical data on the restock straps: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Top-up tabs, used total height: approx. 320 mm overall width: approx. 110 mm Inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 50 mm Perforated grid i. d. width x height: approx. 60 x 50 mm Drill holeØ: approx. 10 mm Material color: blue Weight | pcs.: approx. 1,860 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.

Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 1 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 18 X 900,

Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Doppelseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 2 X 900,

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg

Shaft material, shaft, steel shaft, hardened shaft, profile shaft, splined shaft, toothed shaft -Spline shaft: Splined shaft profile shaft 8 teeth -Diameter: 54 mm -Length: 2440 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: Ø 54 x 2440 mm -Weight: 37 kg

V-belt pulley, belt pulley -Diameter: 630 mm -Belt: 1 -V-belt width: 25 mm -Hole: Ø 32 mm -Weight: 29.5 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Shearing tool: Knife plate punch die for profile steel, 6 pieces Sizes: see photos -Submission/Price: complete -Dimensions each: 188/188/H40 mm -Weight: 10 kg/pc.

The scope of delivery includes: 01x U-profile, used Material colour: orange Overall length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | Pcs.: approx. 26.31 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: Heesemann, Type: Profilklotzeinschleifgerät PWST, Bauyeshr : 1994, Control: hand, Sanding belt hight: 80, Tischlänge mm : 800, Work piece hight min - max mm: 80, Control panel on top: yes, radius sanding device: yes, Profilwerkzeug-Formschleifmaschine PWS-T für das massgenaue Schleifen der Konturen vorgearbeiteter Profilwerkzeuge, bestehend aus über Getriebemotor oszillierend, Profilwerkzeuge auf Kreissegment schwenkbar gelagert. , Year :1994

Our ProfilineLP is a semi-automatic stretch wrapper, which can be stored by up to 32 programmes guarantees absolutely consistent results and thus ensures the safe exclusion of the "Faktors Mensch". Space-saving like a pallet wrapper with a horseshoe plate and sturdy like a closed one System – this is how the advantages of this machine can be summed up! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs save. As part of the programs, you can also adjust how fast the film slides are and turntables. Head windings, foot windings and the overlap can also be of the film at the end of the pallet to each program. In this way, you can Packing scheme to store individual programs in order to achieve ever more perfect winding results. achieve. The pr ...

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/sec tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad connected load frequency: 400 V total power requirement: 2,5 /3,3 kW weight of the machine ca.: 0,19 t dimensions of the machine ca.: 1,2 x 0,75 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tilting frying pan, make Palux ProfiLine, model PLEKB15-90-120-PM, built in 2023 (NEW!), 3 pieces available, for frying, braising and steaming products with cooking oil/fat,, low-fat cooking of breaded meat and fish, poultry, fried potatoes, fried sirloin,, Frying plate for everything short-fried, such as steaks, schnitzels, fillets, fish, pancakes, mushroom pans, etc.,, Preparing soups, sauces, ragouts, goulash, etc. (e.g. sautéing, deglazing the ingredients and pureeing for soups),, not suitable for deep frying!, The heat is supplied via electric radiators under the roasting pan,, Thermostatic control of radiators,, with certainty - temperature limiter,, Motorized tilting takes place via push buttons., Technical specifications:, Connected load: 18 kW,, Steam output: 10.58 kg/h,, Control range: 50 - 250°C,, Crucible size: 980 x 570 x 215 mm,, Roasting surface: 980 x 570 mm,, Nominal c ...

table-size: Breite: 800 mm table-size: Tiefe: 350 mm workpiece height: mm Dimensions (L/W/H): 4600 x 3200 x 2500 mm weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Test force: -- kN Dimensions (HxWxD): -- mm weight: 76 kg Condition: Used, ready for use Specification: Mitutoyo image processing and profile measuring device Type: Quick Scope QS-250Z 1J - Used The Quick Scope QS-250Z is used to measure: - Outer diameter - Inner diameter - Distance measurement - Parallelism - Angularity The device was used in quality assurance in a single-shift operation. Technical data: - Measuring range: X = 200 mm, Y = 250 mm, Z = 100 mm - Accuracy: 5 µ / resolution 0.5 µm - Image capture unit: 1/3 CCD color camera - Travel speed max.: 80 mm/s - Acceleration max.: 250 mm/s² - Table dimensions: 269 x 311 mm Lighting: - Transmitted light: 12V / 30W halogen - Coaxial incident light: 12V / 50W halogen - Fiber optic ring light: 12V / 100W halogen Software: QSPAK Version 3.1 Operating system: Win10pro Workpiece weight: max. 10 kg Weight:  ...

Our Profiline is a semi-automatic stretch wrapper, which guarantees absolutely consistent results thanks to up to 32 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be precisely stored in the individual steps (foot winding, winding up / head winding / winding down) in the programs. As part of the programs, you can also adjust how fast the foil carriages and turntables run. Head windings, foot windings and the overlapping of the film at the end of the pallet can also be stored for each program. In this way, you can store individual programs for each packing scheme in order to achieve ever more perfect winding results. The programs can be protected by password, so that the user can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg  ...

Our Profiline TP is a semi-automatic stretch wrapper, which guarantees absolutely consistent results thanks to up to 32 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be precisely stored in the individual steps (foot winding, winding up / head winding / winding down) in the programs. As part of the programs, you can also adjust how fast the foil carriages and turntables run. Head windings, foot windings and the overlapping of the film at the end of the pallet can also be stored for each program. In this way, you can store individual programs for each packing scheme in order to achieve ever more perfect winding results. The programs can be protected by password, so that the user can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of u ...

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg