We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Key data: 2700 kN
Battenfeld TM 2700/1900 Year of construction: 2002 Injection unit: Screw diameter: 65 mm Spray weight: 981 g Spray pressure: 1777 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 270 t Tie bar spacing: 630x630 mm Size of clamping plates: 940x940 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Euromap Robot Interface Air valve x 2 Hydraulic core pull x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Central lubrication Automatic tool height adjustment Parallel Movements Metrics: Weight: 11800 kg Length/Width/Height: 7.08x1.70x2.20 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...
used
Clamping unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./ max. mould height [mm] 300-710 Maximum opening width [mm] 1380 Injection Unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions & Weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7,60 x 1,80 x 2,40
used
Key data: 500 kN
Battenfeld TM 500/210 Year of construction: 2002 Injection unit: Screw diameter: 30 mm Spray weight: 96.5 g Injection pressure: 2042 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Central lubrication Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.51x1.18x1.63 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical test ...
used
Clamping unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./ max. mould height [mm] 200 Maximum opening width [mm] 730 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g]: 95 Injection pressure [bar] 2042 Dimensions & Weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m
used
Ref. no.: 17514Producer: BILLIONYear of construction: 2011Clamping unitClamping force: 50 tonOpening stroke: 250 mmDistance between tie bars: 350 x 300 mmMould height min.: 150 mmMould height max.: 400 mmPlaten size (h x v): 490 x 440 mmInjection unitScrew diameter: 25 mmInjection volume: 39 cm³Shot weight: 35 gInjection pressure: 2040 barMeasurements and weightDimensions: 3,7 x 1,4 x 1,8 mMachine weight: 3200 kgAdditional information & extrasHot runner systems: 6 pcs.
used
Key data: 350 kN
Boy 35A VV Year of construction: 2005 Injection unit: Screw diameter: 28 mm Spray weight: 55.8 g Spray pressure: 1577 bar Dosing volume: 58.5 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 280x254 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan CT - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Metrics: Weight: 1350 kg Length/Width/Height: 2.06x0.95x2.74 m Drive: Pumps/motor: 7.5 kW Heating capacity: 5.8 kW Total power: 13.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 500 , 115 , 38
1 x Boy 50T2 Year of construction 1992 Clamping force: 50 to. Screw diameter: 38 mm only 15,028 operating hours! 1 x Boy 50M Year of construction 1991 Clamping force: 50 to. Screw diameter: 38 mm only 18,656 operating hours! Both machines are in good condition, and haven´t been in production very often!
used
Key data: 550 kN
Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...
used
Key data: 550 kN
Boy 55A Pro / Operating hours: 20,876 in automatic mode / Machine in very good technical condition Year of construction: 2016 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 20,876 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...
used
Key data: 900 kN
Boy 90 M Year of construction: 2004 Injection unit: Screw diameter: 42 mm Spray weight: 193 g Injection pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tie bar spacing: 430x360 mm Size of clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 1 Metrics: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,
used
Key data: 62 kN
Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of construction: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touchscreen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air Valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor, which is controlled by an inverter – very precise Automatic part feeding with quality control system Machine workstation protection with safety package Metrics: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...
used
Key data: 5000 , 2550 , 95
Year of construction: 2001 Clamping force: 5,000 KN with 6-axis Fanuc robot M16i , Year of construction 2001 incl. conveyor belt and safety fence Equipment: Screw: diameter 95 mm Injection weight: 2,550 gr./hp Ejector stroke: 230 mm Tie bar spacing: 900 x 800 mm Installation height min. – max.: 400 – 880 mm Max. distance between plates: 1,690 mm Opening travel max.: 810 mm Max. tool weight: 6,700 KG 6-fold cascade pneumatic 2 core pulls Robot interface Injection pressure max. 1,550 bar Control NC10
used
LT 05/2020
used
Key data: 1000 , 205 , 40
Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface
used
screw size: unbkt. mminjection shot weight in Polysterol: unbkt. g/PSclosing pressure: 150 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 1500 , 210 , 40
Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface
used
clamping force: -- kNinjection volume: 230 cm³screw diameter: 40 mmplaten size: 475 x 475 mmCondition: used,Specification: Horizontal injection moulding machine,injection unit:- Screw diameter: 40 mm- Cylinder diameter: 40 mm- Spraying volume: 230 cm³.Clamping unit:- tie bar distance: 475 x 475 mm- Operating hours approx.: 30000 h- Air valve- Core pull- 12-way hot runner controllerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 500 , 41 , 22
Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1
used
Key data: 350 , 78 , 30
Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct
used
Key data: 500 , 128 , 35
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 viva Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/Shot volume: 106.5 cc/95 gram hp Spez. Spray./injection pressure: 2573 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Air valve x1
used
Key data: 500 , 94 , 30
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 per Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/shot volume: 144 cc/128 gram hp Spez. Spray./injection pressure: 1890 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Core train x1 Air valve x1
used
Key data: 600 , 52 , 25
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 60/420-200 Bau-year year: 1999 Control/Controller: NC 4 Control Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 600 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 25 mm Lifting volume/shot volume: 61 cc/52 gram hp Spez. Spray./injection pressure: 2740 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8.3 kW Dimensions: 3.7 m x 1.6 m x 2.1 m Weichtt/Weight: 3900 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core train x1 Air valve x3
used
clamping force: 6500 kNinjection volume: 2011 / 323 cm³screw diameter: 80 / 45 mmplaten size: 1450 x 1350 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1:- Screw diameter: 80 mm- injection volume: 2.011 cm³- weight: 1810 ginjection unit 2:- Screw diameter: 45 mm- injection volume: 323 cm³- weight: 290 gClamping unit:- Clamping force: 6500 kN- Centring: 200 mm- Platen size: 1450 x 1350 mm- Mould size: 1000 x 910 mm- Mould thickness min.: 450 mm- Mould thickness max.: 950 mm- 2x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 245 kW- Dimensions L/W/H: approx. 10,100 x 5 ...
used
Key data: 800 , 149 , 35
Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1
used
Ref. no.: 17195Hersteller: DEMAGYear of construction: 1996Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 400 x 400 mmMould height min.: 250 mmPlaten size (h x v): 580 x 590 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 3,9 Ã 1,4 Ã 1,9 mMachine weight: 3700 kg
used
clamping force: 1.000 kNinjection volume: 203 cm³screw diameter: 40 mmplaten size: 580 x 652 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 40 mm- injection volume: 230 cm³- weight: 205 gClamping unit:- Clamping force: 1000 kN- Centring: 125 mm- Platen size: 580 x 652 mm- Mould size: 400 x 400 mm- Mould thickness min.: 250 mm- Mould thickness max.: 450 mm- 1x core pull- Voltage: 3x 400V, 50Hz, N, PE- Total power: 25 kW- Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm- Weight approx.: 4,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate conveying on our homepage.The data for this ad was created with ModulMWS - the software solution ...
used
Ref. no.: 17516Hersteller: DEMAGYear of construction: 1998Clamping unitClamping force: 100 tonOpening stroke: 500 mmDistance between tie bars: 420 x 420 mmMould height min.: 250 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 25 mmInjection volume: 61 cm³Shot weight: 54 gInjection pressure: 2752 barMeasurements and weightDimensions: 4,2 x 1,4 x 2,0 mMachine weight: 4200 kgAdditional information & extrasCore pull: 1 pcs
used
Ref. no.: 17505Hersteller: DEMAGYear of construction: 1997Clamping unitClamping force: 35 tonOpening stroke: 350 mmDistance between tie bars: 320 x 320 mmMould height min.: 180 mmPlaten size (h x v): 460 x 450 mmInjection unitScrew diameter: 18 mmInjection volume: 23 cm³Shot weight: 20 gInjection pressure: 2868 barMeasurements and weightDimensions: 3,3 x 1,2 x 2,0 mMachine weight: 2700 kg
used
clamping force: 600 kNinjection volume: 106 cm³screw diameter: 30 mmplaten size: 590 x 600 mmCondition: used,Specification: Horizontal injection moulding machine, type: System 60/420-200- Internat. Size specification: 600 - 200injection unit:- Screw diameter: 30 mm- L/D - ratio: 20D- Injection volume: 106 cm³- Injection pressure: 1995 bar- Cylinder heating: 8,3 kWclamping unit:- Clamping force: 600 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 590 x 600 mm- Clear column distance: 420 x 420 mmTotal machine:- Oil tank filling: 180 ltr.- Pump capacity: 22 kW- Voltage: 3x 400V, 50 Hz- total power: 30,3 kW- Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm- Weight without oil approx ...
used
Ref. no.: 17507Producer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg
used
clamping force: 800 kNinjection volume: 177 cm³screw diameter: 35 mmplaten size: 580 x 580 mmCondition: used,Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400- Internat. Size specification: 800 - 400injection unit:- Screw diameter: 35 mm- L/D - ratio: 20D- Injection volume: 177 cm³- Injection pressure: 2387 bar- Cylinder heating: 8,8 kWclamping unit:- Clamping force: 800 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 580 x 580 mm- Clear column distance: 400 x 400 mmTotal machine:- Oil tank filling: 220 ltr.- Pump capacity: 15 kW- Voltage: 3x 400V, 50 Hz, N, PE- total power: 23,8 kW- Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm- Weight without ...
used
clamping force: 800 kNinjection volume: 106 / 42 cm³screw diameter: 30 / 22 mmplaten size: 600 x 600 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 30 mm- injection volume: 106 cm³- weight: 94 ginjection unit 2:- Screw diameter: 22 mm- injection volume: 42 cm³- weight: 37 gClamping unit:- Clamping force: 800 kN- Centring: 125 mm- Platen size: 600 x 600 mm- Mould size: 420 x 420 mm- Mould thickness min.: 250 mm- Mould thickness max.: 590 mm- Voltage: 3x 400V, 50Hz, N, PE- Total power: 42 kW- Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm- Weight approx.: 5,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate ...
used
Ref. no.: 18138Producer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 850 mmDistance between tie bars: 370 X 3370 mmMould height min.: 200 mmMould height max.: 510 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 22 mmInjection volume: 37 cm³Shot weight: 32 gInjection pressure: 2580 barMeasurements and weightDimensions: 4,50 X 1,28 X 1,95 mMachine weight: 4750 kg
used
clamping force: 4200 kNinjection volume: 1212 /292 cm³screw diameter: 70 /15 mmplaten size: 1200 x 1100 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1:- Screw diameter: 70 mm- injection volume: 1.112 cm³- weight: 880 ginjection unit 2:- Screw diameter: 15 mm- injection volume: 292 cm³- weight: 190 gClamping unit:- Clamping force: 1200 kN- Centring: 160 mm- Platen size: 1200 x 1100 mm- Mould size: 810 x 710 mm- Mould thickness min.: 380 mm- Mould thickness max.: 940 mm- 4 & 4 Cascades- 4x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 192 kW- Dimensions L/W/H: appr ...
used
Key data: 250 kN
Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in ...
used
Key data: 500 kN
Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live ...
used
Key data: 500 kN
Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...
used
Key data: 800 kN
Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to ...
used
Key data: 4200 kN
Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement Se ...
used
Key data: 2000 kN
Demag Ergotech Extra 200-840 EcQ with the Wittmann-Demag W721 robot / machine in very good technical condition Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 570 g Spray pressure: 1351 bar Dosing volume: 636 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 580x580 mm Size of clamping plates: 860x860 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Air Valve x 4 Hydraulic core pull x 2 Control with hot runners Injection unit hardened - Bimetal Parallel Movements Central lubrication Built-in emulator – a copy of the machine system on a flash card Robot Wittmann W721 Year of construction: 2006 5-axis robots: 3 axes are driven by servo motors (electric); Axis C and Motion A Travels in axes: X-550, Y-1200, Z-2000 Touch control panel The ...
used
Key data: 1100 kN
Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...
used
Key data: 500 kN
Demag Ergotech Viva 500-270 Year of construction: 2003 Injection unit: Screw diameter: 30 mm Injection weight: 95 g Spray pressure: 2573 bar Dosing volume: 106.5 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 2 pairs Built-in printer for printing reports Metrics: Weight: 2500 kg Length/Width/Height: 3.65x1.15x1.95 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 800 kN
Demag Ergotech Viva 800-310 / Machine in very good technical condition Year of construction: 2002 Injection unit: Screw diameter: 35 mm Spray weight: 152 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Built-in Demag sprue picker for removing molded parts Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3600 kg Length/Width/Height: 4.05x1.27x1.91 m Drive: Pumps/motor: 15 kW Heating capacity: 9.4 kW Total power: 24.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical ...
used
Key data: 220 mm, 18 , 18
Used, refurbished injection moulding machine Dr. Boy 22 M Procan Parts warranty available. Plasticizing unit 18 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine
used
Key data: 220 mm, 44 , 28
Used injection moulding machine Dr. Boy 22 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Example photo of identical machine
used
Key data: 250 mm, 37 , 24
Used, refurbished injection moulding machine Dr. Boy 25 M Procan Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 254 mm (width) x 254 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine
used
Key data: 273 mm, 49 , 28
Used injection molding machine Dr. Boy 30 M + Screen controlled machine mipronic + Sold in functional tested or partially overhauled condition. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 255 mm (height) x 255 mm (width) 400V / 50 Hz Operating instructions More Dr. Boy injection molding machines from 220 KN to 80 KN in stock More Dr. Boy Injection Moulding Machine 30 M mipronic (Schleicher Control) in stock Plasticizing cylinder 18 mm, born in 1990 Sample photo Offer subject to change
used
Key data: 300 kN, 50 g/PS, 28 mm
Used injection moulding machine Dr. Boy 30 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 28 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 280 mm (height) x 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH and PIOVAN vacuum cleaner possible for an extra charge incl. installation More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Photos are sample images
used
Key data: 500 mm, 121 , 38
Used injection moulding machine Dr. Boy 50 M Procan from ongoing production Parts warranty available. Plasticizing unit 38 mm thermoplastic open nozzle Water distributor 6-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 335 mm (width) x 305 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine Offer subject to change