used Plastic injection machines for sale

Screw diameter; 60 mm Injectable volume: 792cm3 Injection pressure: 2500 bar Column width: 720 x 720 mm Minimum mould thickness: 300 mm max: 700 mm Aperture stroke: 700 mm Cores: 3 Robot Interface: YES Options with ARBURG robot

Ref. no.: 18140Producer: BATTENFELDYear of construction: 2006Clamping unitClamping force: 25 tonOpening stroke: 450 mmDistance between tie bars: 270 X 270 mmMould height min.: 150 mmInjection unitScrew diameter: 14 mmInjection volume: 15 cm³Shot weight: 7 gInjection pressure: 2650 barMeasurements and weightDimensions: 2,25 X 0,90 X 1,30 mMachine weight: 1100 kg

Key data: 1000 , 291 , 45

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

Key data: 2000 , 491 , 50

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: Unilog 4000 B Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 560 mm x 560 mm Disk size/platen size: 800 mm x 800 mm WZ height/mould hight: 200 mm max 520 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 970 mm Auger/screw size: 50 mm Stroke volume/shot volume: 540 CC / 491 gram PS spec. Spritzdr / injection pressure: 1822 bar General / General engine power: 30 kW Heating/heating power: 15.6 kW Dimensions/dimensions: 5.65 m x 1.45 m x 2.10 m Weight/weight: 10400 kg screen text/language: English additional equipment/additional equipment Core puller / core pulling: x 3 Lubrication lubrication / Central

Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nominal pump motor capacity: 30 kW Installed heating capacity: 22.6 kW Tank capacity: 560 ltr. Dimensions & Weight Machine dimensions: 5.65 m x 1.45 m x 2.10 m Total weight of the machine: 9800 kg

Key data: 500 , 130 , 35

Manufacturer: Battenfeld Type: BA 500/210 TM Built: 2000 Control: Unilog B2 Closing force: 500 kN Closing type: Knee lever Tie bar distance: 320 mm x 320 mm Plate size: 490 mm x 490 mm Tool installation height: min 150 mm max 350 mm Opening distance: 250 mm Plate spacing max.: 600 mm Screw: 35 mm Lifting volume: 144 cc Spray weight PS: 130 gram PS Spray pressure: 1500 bar General Engine: 11 kW Heating: 10.4 kW Dimensions: 3.3 m x 1.1 m x 1.7 m Weight: 2500 kg Screen text: German / English Additional equipment Robot interface Core train: x1

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Key data: 750 , 198 , 40

Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Ref. no.: 16369Producer: BATTENFELDYear of construction: 2005Clamping unitClamping force: 75 tonOpening stroke: 800 mmDistance between tie bars: 405 x 405 mmMould height min.: 150 mmMould height max.: 480 mmInjection unitScrew diameter: 18 mmInjection volume: 30 cm³Shot weight: 27 gInjection pressure: 2440 barMeasurements and weightDimensions: 4,5 x 1,7 x 2,0 mMachine weight: 4500 kg

Key data: 10000 kN, 6974 g/PS, 120 mm

Year of construction 2005 Operating hours: 20,437 h Installation height 500 / 1050 mm Aperture travel 1300 mm Clamping dimensions 1350 / 1350 mm Tie bar spacing 1400 / 1120 mm Centering 250 / 250 mm Core Pull 2x Maximum clamping force 10000 KN Calculated dosing volume 7634 ccm Maximum shot weight polystyrene 6947 g Screw diameter 120 mm Water circuits DS 6 / AS 6 Equipped with Wittmann handling With conveyor belt

Clamping force: 10000 t Production year: 2002 Injection weight: 6175 g Injection unit: .../12000 Screw diameter: 120 mm Injection weight: 6175 g Tool closure system: 10000/... Clamping force: 10000 t Distance between columns: 1400 x 1200 mm Tool height: 550...1255 mm

CONTROLS  CNC controls UNILOG B6 MOULD CLAMPING UNIT  locking force: 160 to  die opening stroke max.: 650 mm  mould height min.: 300 mm  mould height max.: 950 mm  max. distance between tool-plates: 950 mm  space between tie bars L1: 570 mm  space between tie bars L2: 520 mmINJECTION UNIT  Diameter of screw: 40 mm  Injection pressure: 2100 bar  Shot volume: 251 cm³  Shot weight max. (Polystyrol): 228 gHYDRAULIC UNIT  oil volume: 400 ltrELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 5000 mm  space requirements -front/back-: 1650 mm  total height: 2140 mm  total weight approx.: 7300 kgMachine in very good condition (= ph ...

CONTROLS  CNC controls UNILOG B6 MOULD CLAMPING UNIT  locking force: 60 to  die opening stroke max.: 450 mm  mould height min.: 200 mm  mould height max.: 650 mm  space between tie bars L1: 370 mm  space between tie bars L2: 320 mmINJECTION UNIT  Diameter of screw: 25 mm  Shot volume: 61.4 cm³  Shot weight max. (Polystyrol): 55.9 gELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3515 mm  space requirements -front/back-: 1321 mm  total height: 1940 mm  total weight approx.: 3000 kg

Key data: 800 , 153 , 35

Manufacturer: Battenfeld Type: HM 80/350 S Year of construction: 2005 Control: Unilog B4 Closing force: 800 kN Closing type: Hydraulish Tie bar spacing: 370 mm x 420 mm Plate size: 544 mm x 544 mm Tool height: min 225 mm Opening distance: 475 mm Plate spacing max.: 700 mm Screw: 35 mm Lifting volume: 169 ccm Injection weight PS: 153.8 gram HP Injection pressure: 2083 bar general Engine: 15 kW Heating: 10,4 kW Dimensions: 3.7 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 350 , 50 , 30

Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Clamping unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./ max. mould height [mm] 300-710 Maximum opening width [mm] 1380 Injection Unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions & Weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7,60 x 1,80 x 2,40

Clamping unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./ max. mould height [mm] 200 Maximum opening width [mm] 730 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g]: 95 Injection pressure [bar] 2042 Dimensions & Weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m

Ref. no.: 17514Producer: BILLIONYear of construction: 2011Clamping unitClamping force: 50 tonOpening stroke: 250 mmDistance between tie bars: 350 x 300 mmMould height min.: 150 mmMould height max.: 400 mmPlaten size (h x v): 490 x 440 mmInjection unitScrew diameter: 25 mmInjection volume: 39 cm³Shot weight: 35 gInjection pressure: 2040 barMeasurements and weightDimensions: 3,7 x 1,4 x 1,8 mMachine weight: 3200 kgAdditional information & extrasHot runner systems: 6 pcs.

Key data: 500 , 115 , 38

1 x Boy 50T2 Year of construction 1992 Clamping force: 50 to. Screw diameter: 38 mm only 15,028 operating hours! 1 x Boy 50M Year of construction 1991 Clamping force: 50 to. Screw diameter: 38 mm only 18,656 operating hours! Both machines are in good condition, and haven´t been in production very often!

Key data: 550 kN

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All of ...

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

Key data: 5000 , 2550 , 95

Year of construction: 2001 Clamping force: 5,000 KN with 6-axis Fanuc robot M16i , Year of construction 2001 incl. conveyor belt and safety fence Equipment: Screw: diameter 95 mm Injection weight: 2,550 gr./hp Ejector stroke: 230 mm Tie bar spacing: 900 x 800 mm Installation height min. – max.: 400 – 880 mm Max. distance between plates: 1,690 mm Opening travel max.: 810 mm Max. tool weight: 6,700 KG 6-fold cascade pneumatic 2 core pulls Robot interface Injection pressure max. 1,550 bar Control NC10

LT 05/2020

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

screw size: unbkt. mminjection shot weight in Polysterol: unbkt. g/PSclosing pressure: 150 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500 , 210 , 40

Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface

clamping force: -- kNinjection volume: 230 cm³screw diameter: 40 mmplaten size: 475 x 475 mmCondition: used,Specification: Horizontal injection moulding machine,injection unit:- Screw diameter: 40 mm- Cylinder diameter: 40 mm- Spraying volume: 230 cm³.Clamping unit:- tie bar distance: 475 x 475 mm- Operating hours approx.: 30000 h- Air valve- Core pull- 12-way hot runner controllerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

Key data: 500 , 128 , 35

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 viva Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/Shot volume: 106.5 cc/95 gram hp Spez. Spray./injection pressure: 2573 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Air valve x1

Key data: 500 kN, 94 g/PS, 30 mm

Year of construction 2004 Clamping force: 50 tons. Injection weight: 94 gr. Screw diameter: 30 mm 2 core pulls Good condition

Key data: 500 , 94 , 30

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 per Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/shot volume: 144 cc/128 gram hp Spez. Spray./injection pressure: 1890 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Core train x1 Air valve x1

Key data: 600 , 52 , 25

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 60/420-200 Bau-year year: 1999 Control/Controller: NC 4 Control Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 600 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 25 mm Lifting volume/shot volume: 61 cc/52 gram hp Spez. Spray./injection pressure: 2740 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8.3 kW Dimensions: 3.7 m x 1.6 m x 2.1 m Weichtt/Weight: 3900 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core train x1 Air valve x3

clamping force: 6500 kNinjection volume: 2011 / 323 cm³screw diameter: 80 / 45 mmplaten size: 1450 x 1350 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1:- Screw diameter: 80 mm- injection volume: 2.011 cm³- weight: 1810 ginjection unit 2:- Screw diameter: 45 mm- injection volume: 323 cm³- weight: 290 gClamping unit:- Clamping force: 6500 kN- Centring: 200 mm- Platen size: 1450 x 1350 mm- Mould size: 1000 x 910 mm- Mould thickness min.: 450 mm- Mould thickness max.: 950 mm- 2x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 245 kW- Dimensions L/W/H: approx. 10,100 x 5 ...

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Key data: 800 kN, 149 g/PS, 35 mm

Year of construction: 1997 Clamping unit - Clamping force: 800 kN - Handle width: 400 x 400 mm - Tool installation height 250/ 700 Injection unit - Shot weight (PS): 149 g - Screw diameter: 35 mm Remark: - Dispensing without sprue picker and external Peripherals - Displacement measuring system for Screw movement changed - Hydraulic motor for worm drive Switched in 2019 - 02/2022 Hydraulic hoses changed - Cavitation in pump - Plasticizing unit is needed as a replacement for other machines and is not included! General - 2 core pulls -Machine is still in operation Pump running time - approx. 114,000h Other: -Submission expected June/ July 2024 -for the production of spare parts

Ref. no.: 17195Hersteller: DEMAGYear of construction: 1996Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 400 x 400 mmMould height min.: 250 mmPlaten size (h x v): 580 x 590 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 3,9 × 1,4 × 1,9 mMachine weight: 3700 kg

Key data: 4200 kN

Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement  ...

clamping force: 1.000 kNinjection volume: 203 cm³screw diameter: 40 mmplaten size: 580 x 652 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 40 mm- injection volume: 230 cm³- weight: 205 gClamping unit:- Clamping force: 1000 kN- Centring: 125 mm- Platen size: 580 x 652 mm- Mould size: 400 x 400 mm- Mould thickness min.: 250 mm- Mould thickness max.: 450 mm- 1x core pull- Voltage: 3x 400V, 50Hz, N, PE- Total power: 25 kW- Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm- Weight approx.: 4,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate conveying on our homepage.The data for this ad was created with ModulMWS - the software solution ...

Ref. no.: 17516Hersteller: DEMAGYear of construction: 1998Clamping unitClamping force: 100 tonOpening stroke: 500 mmDistance between tie bars: 420 x 420 mmMould height min.: 250 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 25 mmInjection volume: 61 cm³Shot weight: 54 gInjection pressure: 2752 barMeasurements and weightDimensions: 4,2 x 1,4 x 2,0 mMachine weight: 4200 kgAdditional information & extrasCore pull: 1 pcs

Ref. no.: 17505Hersteller: DEMAGYear of construction: 1997Clamping unitClamping force: 35 tonOpening stroke: 350 mmDistance between tie bars: 320 x 320 mmMould height min.: 180 mmPlaten size (h x v): 460 x 450 mmInjection unitScrew diameter: 18 mmInjection volume: 23 cm³Shot weight: 20 gInjection pressure: 2868 barMeasurements and weightDimensions: 3,3 x 1,2 x 2,0 mMachine weight: 2700 kg

clamping force: 600 kNinjection volume: 106 cm³screw diameter: 30 mmplaten size: 590 x 600 mmCondition: used,Specification: Horizontal injection moulding machine, type: System 60/420-200- Internat. Size specification: 600 - 200injection unit:- Screw diameter: 30 mm- L/D - ratio: 20D- Injection volume: 106 cm³- Injection pressure: 1995 bar- Cylinder heating: 8,3 kWclamping unit:- Clamping force: 600 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 590 x 600 mm- Clear column distance: 420 x 420 mmTotal machine:- Oil tank filling: 180 ltr.- Pump capacity: 22 kW- Voltage: 3x 400V, 50 Hz- total power: 30,3 kW- Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm- Weight without oil approx ...

Ref. no.: 17507Hersteller: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg

clamping force: 800 kNinjection volume: 177 cm³screw diameter: 35 mmplaten size: 580 x 580 mmCondition: used,Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400- Internat. Size specification: 800 - 400injection unit:- Screw diameter: 35 mm- L/D - ratio: 20D- Injection volume: 177 cm³- Injection pressure: 2387 bar- Cylinder heating: 8,8 kWclamping unit:- Clamping force: 800 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 580 x 580 mm- Clear column distance: 400 x 400 mmTotal machine:- Oil tank filling: 220 ltr.- Pump capacity: 15 kW- Voltage: 3x 400V, 50 Hz, N, PE- total power: 23,8 kW- Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm- Weight without  ...

clamping force: 800 kNinjection volume: 106 / 42 cm³screw diameter: 30 / 22 mmplaten size: 600 x 600 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 30 mm- injection volume: 106 cm³- weight: 94 ginjection unit 2:- Screw diameter: 22 mm- injection volume: 42 cm³- weight: 37 gClamping unit:- Clamping force: 800 kN- Centring: 125 mm- Platen size: 600 x 600 mm- Mould size: 420 x 420 mm- Mould thickness min.: 250 mm- Mould thickness max.: 590 mm- Voltage: 3x 400V, 50Hz, N, PE- Total power: 42 kW- Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm- Weight approx.: 5,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate ...

Ref. no.: 18138Producer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 850 mmDistance between tie bars: 370 X 3370 mmMould height min.: 200 mmMould height max.: 510 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 22 mmInjection volume: 37 cm³Shot weight: 32 gInjection pressure: 2580 barMeasurements and weightDimensions: 4,50 X 1,28 X 1,95 mMachine weight: 4750 kg

clamping force: 4200 kNinjection volume: 1212 /292 cm³screw diameter: 70 /15 mmplaten size: 1200 x 1100 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1:- Screw diameter: 70 mm- injection volume: 1.112 cm³- weight: 880 ginjection unit 2:- Screw diameter: 15 mm- injection volume: 292 cm³- weight: 190 gClamping unit:- Clamping force: 1200 kN- Centring: 160 mm- Platen size: 1200 x 1100 mm- Mould size: 810 x 710 mm- Mould thickness min.: 380 mm- Mould thickness max.: 940 mm- 4 & 4 Cascades- 4x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 192 kW- Dimensions L/W/H: appr ...

Key data: 220 mm, 18 , 18

Used, refurbished injection moulding machine Dr. Boy 22 M Procan Parts warranty available. Plasticizing unit 18 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine

Key data: 220 mm, 44 , 28

Used injection moulding machine Dr. Boy 22 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Example photo of identical machine