Manufacturer:
(Category: 705)
Thermo Scientific Incubator, Internal dimensions (mm): 505x440 H 665, Number of shelves: 3, Maximum temperature (°C): 55°C , Sterilization temperature cycle (°C): 180°C , CO2 control: ± 0.1% , O2 control: ± 0.1% , Humidity: RH: >_93% @ 37°C
The Betapress is a high-speed, single-sided rotary tablet press that is ideally suited for production of tablets in medium batches. Rate 90,000 tablets/hour Number of stations: 16 Compression: 65kN Forced feed filling shoe Sold in many formats: ø 5.5 Round flat, breakable, chamfered 22 Matrices 24 top punches 23 lower punches ø 6 Round domed COMPLETE 16 dies 16 top punches 16 lower punches ø 8 Round flat chamfered 19 matrices 15 top punches 15 lower punches ø 9 Round flat chamfered 35 dies 39 upper punches 41 lower punches ø 9.5 round, breakable, chamfered 16 lower punches ø 10 Round domed 7 matrices 9 top punches 8 lower punches ø 10x79 Oblong 12 dies 13 top punches 14 lower punches ø 11 Round domed, breakable 3 matrices 2 upper punches 3 lower punches ø 13 Round flat chamfered 3 matrices 9 lower punches ø 15.7 Round flat 20 lower punches, Number of positions: 16 positions , D ...
Fluidized bed dryer 1 drying/granulation tank (4.7 liters) with Top spray option 1 WURSTER tank (2.6 liters) with sample collection, Elec: 380 V / 50 Hz , Revolutions per minute (RPM): 3000, Compressed air pressure: 6 bar
Vacuum pump, Max flow: 2.0 m3/h, Limit void: 2 mbar , Engine power: 0.16kW , Link to manufacturer: shop.vacuubrand/en/vario-chemistry-pumping-group-pc-3001-variopro-vp-5 8.html?_gl=1z327z1_upMQ..&gclid=Cj0KCQjwv7O0BhDwARIsAC0sjWNgJFYzk804i8 3FsvmvE6pdlCfxBV9T2H enFLlzgew3vJwq7OJokRkaAmfdEALw_wcB#product -info-unit-table, : 0.16kW
CERAM rotary sieve Sold with a 4 mm mesh, Number of sieves: 1, Mesh size: 4 mm, Engine: Leroy Sommer: 0.75 kW, Dimensions (mm): 1600x720 H 1215
BÜNDER SCHMITT corker, Elec: 400 V, Dimensions (mm): 950x1120 H 1880
Folding box sizes W 30\endash 100, H 15\endash 85, L 70\endash 150 mm Blister sizes L 65\endash 145, W 25\endash 95, H 3.5\endash 12 mm Output 15\endash 120 folding boxes/min, cycled, depending on format/product Offset plug closure on both sides 3 blister destacking chutes for blisters 98x60 mm, 98x44 mm, 78x34 mm Replenishment chute Brochure folding and insertion machine from stack GUK FA 21/4 Cartonac 2000-2, built in 2014, 4 folding pockets 2 colour embossing stations for folding flap on insertion side and opposite insertion side (embossing rollers not included in scope of delivery) Missing packaging rejection with ejection counter-check Code reading Laetus brochure bottom/top, folding box code opposite insertion (COSI 221) Brochure presence in folding box New in 2013, complete conversion of the control system by Uhlmann at 10,284 operat ...
Blister packaging system consisting of: Horn + Noack N 916 thermoforming blister machine and Uhlmann C 130 folding carton cartoning machine N 916 thermoforming blister machine: Set up for aluminium/PVC/PVDC/PP, 1-lane Roller sealing Film width max. 160 mm Film feed max. 138 m Drawing depth max. 12 mm Punching dimensions max. 150 x 136 mm Output max. 70 moulding cycles/min, max. 200 punching cycles/min Mould film Ø 700 mm, cover film Ø 250 mm 3 product feeders: aligned feeder, roller feeder, brush box with separate control (new in 2012) Single-colour printing unit for cover film Hapa H-216-C, built in 2000, incomplete (without technical inspection) Coding station with embossing printing unit Perforating station New in 2012: Laetus TLU LED PAL LXS MR colour camera with NAVIGATOR software and POLYPHEM wt evaluation unit/touchscreen fo ...
Permissible load 200 kg Lifting mast with floor bearing Overall height 3,050 mm Lifting height centre of mandrel to floor approx. 2.50 m Load reversing gear with mandrel holder Mandrel holder diam. 35 mm, L 460 mm, centre distance 600 mm Lifting column manually swivelling Drive 24/400V/50Hz
Set up for aluminium/PVC/PVDC/PP, 1-lane Roller sealing Film width max. 160 mm Film feed max. 138 m Drawing depth max. 12 mm Max. punching dimensions 150 x 136 mm Max. output 70 moulding cycles/min, max. 200 punching cycles/min Moulding film diam. 700 mm, cover film diam. 250 mm 3 product feeders: aligned feeder, roller feeder, brush box with separate control (new in 2012) Single-colour printing unit for cover foil Hapa H-216-C, built in 2000, incomplete (without technical inspection) Coding station with embossing unit Perforating station New in 2012: Laetus TLU LED PAL LXS MR colour camera with NAVIGATOR software and POLYPHEM wt evaluation unit/touchscreen for filling level control New in 2014: Conveyor belt to downstream machine with blister separation New in 2014, complete control system conversion by Romaco: - Wiring - Elau ...
For measuring cups 2.5\endash15 ml for PP28 closure Measuring cup diam. 37/30 mm, height 28 mm Feed hopper with steep conveyor, mobile Steep conveyor plastic belt white, belt width 500 mm, belt length 2,200 mm, bar spacing 120 mm, bar height 25 mm Measuring cup sorting pot with enclosure Transfer belt to transfer robot Transfer robot with horizontal and vertical axis Suction arm for 3 measuring cups for transfer to bottle conveyor belt Bottle size diam. max. 90 mm, height max. 140 mm PLC Siemens S7-200 HMI Siemens TD 200 Drive 220/24V/50Hz
Stock# UG6391 Automatic machine for lipstick filling Manufacturer: Cosmatic Model: SM43 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2016.
Output approx. 40 cycles/min. 2 filling hoppers, manual product feeding 2 vibrating pots Robot Mitsubishi RH-3SDHR, max. load 3 kg Vacuum gripper Product transfer, e.g. into blister cavities of a blister machine, by inserting the product transfer area of a blister machine into the machine. HMI programme control with touch screen Drive 220V/50Hz This machine is offered at a special price and sold as-is without technical inspection.
For single and multiple containers Straight infeed conveyor with stacking device For PE film Film width 30\endash 200 mm Film thickness 20\endash 100 µm Roll diameter max. 300 mm, core diameter 70/76 mm Output max. 24 cycles/min, depending on format PLC Eberle PLS 508 with Eprom Enclosure with safety switches Connection 400V/50Hz/8.5kW This machine is offered at a special price and sold as-is without technical inspection.
ADMV Tube feeder The machine has been used as a mascara tube feeder Siemens control panel
Cap feeder for various types of caps, tubes, small bottles, etc. Stailess steel Year 2005
Cap feeder for various types of caps, tubes, small bottles, etc. Weckerle Kappen B Stainless steel Year 1998 2 pc available
Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete do ...
Technical Specifications Temperature range approx. –90 ... +100 °C Filling volume up to 27 L Bath opening (W × D) approx. 282 × 257 mm Bath depth (total/usable) 220 mm / 180 mm Pump capacity approx. 20 L/min at ~0.5 bar / 0.33 bar Materials Stainless steel, nickel-plated copper, PETP, PTFE Temperature accuracy resolution 0.01 °C Control Microprocessor + LCD + Pt 100 Interfaces RS-232, Analog, Timer/Clock
Technical Data – Heraeus UT 20 1. Basic data • Model: UT 20 (convection drying oven, Function Line) • Usable volume: 210 litres • External dimensions (W × D × H): approx. 754 × 910 × 720 mm • Internal dimensions (W × D × H): approx. 610 × 672 × 514 mm 2. Temperature range • Working temperature: ambient temperature +20 °C to max. 250 °C 3. Temperature constancy according to DIN 12880 • Deviation at 150 °C (spatial): ± 3 K • Deviation at 150 °C (temporary): ± 0.3 K 4. Electrical data • Power supply: 230 V, 50/60 Hz • Rated power: 2320 W (2.32 kW) • Weight: approx. 100 kg 5. Equipment and construction • Standard: 2 shelves, expandable up to 16 • Stainless steel interior, easy to clean (removable straps, rounded corners) • Circulating air system for even temperature distribution • Microprocessor temperature control (optional: P v ...
1x Fermenter (plant) BIOSTAT Type: C-CDU Reactor: Type: C-10-2 Volume: 15 liters Prod.Nr.: 235 SUS Manufacture: 2001
1x Fermenter (plant) BIOSTAT Type: C-CDU Reactor: Boiler/Vessel Double Jacket Jacket Type: C10-2 Volume: 15 liters Prod.Nr.: 1137 Manufacture: 2002
Manual cream filler. Sold with two pumps. Barely used, in very good condition., Capacity (ml): mini 10 / Maxi: 160 , Hopper volume:: ca. 10 liters , Link to manufacturer: wuerschum/appareils-manuels.html, Cadence / hour: 30-600 pieces/hour
Sepha PRESS-OUT semi-automatic deblistering machine for removing tablets and capsules from push-through blisters without damaging the product, capacity up to 60 blisters/min, mounted on a mobile trolley with collection container for empty blisters, electrical connection 230V, 60 Hz, rated current 0.4 A, rated power consumption 0.1 kW, machine dimensions approx. 650 x 600 x 1300 mm (LxWxH), machine net weight approx. 60 kg
RBP Bauer ST50 blister punch - offers the possibility to divide any standard blisters into single pocket blisters or pocket groups, blister size max. 145 x 130 mm (BxL), output infinitely variable up to 40 blister per minute, electrics 230V/50-60Hz, Siemens SIMATIC S7-200 with SIMATIC OP3 Operator panel, pneumatic 6 bar, machine dimensions approx. 1100 x 600 x 1400 mm (LxWxH), machine net weight approx. 130 kg, mobile machine on wheels
For counting and filling round and oval tablets, coated tablets, hard and soft gelatine capsules Counting principle: optical sensor with transmitter/receiver 2-row design with 2 filling hoppers, 2x12 channels, 2 filling stations 2 vibrating conveyors per row 1-row container inlet and outlet, 2-row throughput Current container sizes with existing format set diam. 40-60 mm (also square), height 55-185 mm Container sizes generally diam. 20-100 mm, height 55-185 mm, depending on format set Filling hopper diam. 32 mm Output max. 150 containers/min, depending on container/product Tablet sizes diam. 5-20 mm Capsule sizes 000-5 HMI + PLC Siemens Simatic Panel PC 677B Menu languages Swedish, Italian 21 CFR Part 210, 211 compliant 6 Reovib MFS 268 servo converters for vibratory conveyor drives Various sensors 2 reject ejectors ...
Machine for placing plastic bottles from a hopper onto a conveyor belt Max. output 2,400 bottles/hour With 2 format sets for: Bottle (L x W x H) 47 x 47 x 92 mm, 78 x 47 x 138 mm, Ø 45 x 85 mm PLC Siemens S7-1500 new in 2020 Drive 400V/50Hz Has worked with tablet/capsule counting and filling machine (02-0762).
For filling and sealing plastic tubes with heating jaws Manual insertion and removal of tubes, further stations automatic operation Stations: Filling, heating, sealing with embossing (1-line, max. 8 digits), cutting Filling range 10-150 ml with piston dosing and rotary slide valve Output approx. 100-800 tubes/h depending on product and filling quantity Adjustable heating temperature 10 tube holder cassettes for tube diam. max. 60 mm Various tube holders for tube diam. 18, 22, 34, 36 and 40 mm Electr. connection 220V/50Hz This machine is offered at a special price and sold as-is without technical inspection.
PHARMA EQUIPMENT
