Manufacturer:
(Category: 705)
Tablet press Manufacturer: Röltgen Type Oystar Manesty FlexiTab Pressing force upper punch 2-100 kN Compacting of the first layer 2-6 kN Ejection force lower punch 7 kN Output of single-layer tablets approx. 15 pieces/min. Output Two-layer tablets approx. 8 pieces/min. Output of three-layer tablets approx. 5 pieces/min. Compacting of the first layer in multi-shift operation 2-6 kN Dimensions H x W x D - approx. 1980 x 1420 x 720 mm Weight with frame approx. 800 Kg Documents available
Homogenizing Mixer Manufacturer : Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres Equipment: Agitator with wall scraper 20-160 rpm Left-hand rotation/counterclockwise rotation and alternating left-right rotation Homogenizer 500-6,600 rpm Surface in the product room is highly polished The following components are integrated: Vacuum pump Heating PLC control PC with process visualization and automation software Documents: available
Homogenizing Mixer Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ
Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber
Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells.
Homogenizing Mixer Manufacturer: Becomix Type RW 1000 CD Capacity 1000 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 1000 liter pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells
Stainless steel vacuum vessel with EKATO FLUID Mixer TYPE FGL-25D (mixer new 2005) vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C
Centrifugal pump, 11kw, inlet/outlet DN 80 to DN 100 PN16 (DIN2633)
Centrifugal pump, motor 7,5hp/11,5kw; 1400RPM;60m3/h; Id No: 21973. Closed hygienic centrifugal pump with open impeller. The pump meets the highest requirements of the food, pharmaceutical, chemical and water treatment industries. Parts in contact with the working environment are made of stainless steel CF-3M 1.4404/AISI 316L. The clamp body and seal are designed to be quickly disassembled for inspection, cleaning and maintenance. All dimensions are indicated in the drawing. The passport contains the following technical characteristics: liquid lifting height up to 25 meters, volume of pumping liquid up to 1000 l/min (60 m3/h)
Centrifugal pump, inlet/outlet 51/51mm, motor ABB Motors 4kw 1420 rpm 20m3/h
Centrifugal pump, motor 1,5kw, impeller size 160mm, max 18bar 55m3/h, 2800rpm, inlet/outlet 65/51mm
Centrifugal pump, motor 1,1kw, Impeller size 130mm, max 18bar, 33m3/h 2800rpm, inlet/outlet 51/51mm
The SolidC UltraPure pump is an efficient and economical centrifugal pump that meets the requirements of pharmaceutical industries. It handles products gently and resists chemical agents., Pump: Centrifugal pump , dn (mm): 34 , Dn (mm): 34 , engine type: WEG, Engine power: 380 V 50 Hz 7.5 kW , Link to manufacturer: .alfalaval.fr/produits/transfert-des-fluides/pompes/pompes-centrifuges /solidc-ultrapure/
Lobe pump, Motor type: SK 160L/4 TF, Engine type: SK 160L/4 TF, Engine power: 50 Hz 15 kW 380 V , Link to manufacturer: .alfalaval.fr/, Dn (mm): 77, Pump: Obe pump , dn (mm): 77
BPG glass chromatography column., Inner diameter (mm): 200, Total volume (L): 16, Lower tapping: 1, Bottom stitching: 1, Top tapping: 2, Lower stitching: 1, Top stitching: 2, Top nozzle: 2
MANESTY ACCELACOTA laboratory coating turbine Perforated turbine with counter blades Spray arm For batch sizes around 10kg, Dimensions (mm): 1300x860 H 1650mm, Inner diameter (mm): 600, Depth (mm): 440, Perforated impeller: Yes, Perforated turbine: Yes, Batch size: 15kg, Weight (kg): 386
Machine: Horizontal automatic cartoner with reciprocating motion. Product: Blisters, strips, trays, rigid or flexible tubes, bottles, sachets, soap bars, and other food or cosmetic products. Materials: Cases with opposing or alternating flaps made of solid board with a basis weight ranging from 220 to 400 g/m², pre-scored and pre-glued. Closing: By tuck-in flaps or by hot glue applied using commercially available spray nozzles., Cadence / min: 20 to 140 cycles/min , Elec: 400 V / 50 Hz / 8.6 A , A + B (mm): max 140 , A (mm): min 15 / max 90, B (mm): min 12 / max 70 , C (mm): min 50 / max 200
Useful capacity of the product tank: 50 litres Total capacity up to the edge of the tank: 80 litres Operating overpressure in the product tank: -1/+2.0 bar Maximum temperature in the product tank: 125 °C Operating overpressure in the double jacket: 4.0 bar Maximum temperature in the double jacket: 140 °C Stainless steel: 1.4435 1350 Kg Variable motor speed: Outer mixer arm: 11-44 rpm Inner mixer arm: 21-84 rpm Homogeniser: 1150-4350 rpm, Volume: 80 liters , Useful volume: 50 liters , Hustle: 3 types of agitation: outer arm / inner arm / homogenizer , Elec: 380 V / 50 Hz, Cover diameter: 119 mm, Mobile tank: No, Double envelope: Yes, Double envelope volume: 13 liters , Double envelope pressure: 4.0 bar , Weight (kg): 1350
Single stainless steel jacket tank of 110 liters Operating pressure: 2 bars 3 tappings + 1 CIP ball (cleaning in place) Possibility of fixing an electrical panel laterally and connecting an agitator at the bottom of the tank, Enquiry: Request more information, Request for information: Request more information, Information request: Request more information
equipped with a LAETUS system bottle tilter Was previously used on a syrup line, Elec: 380V 50Hz, A + B (mm): 140 mm max, A (mm): 15 - 90 mm, B (mm): 12 - 70 mm, C (mm): 50 - 200 mm, Dimensions (mm): 2280 x 1570 mm, Height (mm): 1755 mm, Documentation: X in Spanish
Volumetric pump, Link to manufacturer:: .fristam/product/fl2/, Link to the manufacturer:: .fristam/product/fl2/, Engine: North motor : 1.10 Kw , Rated rotation speed : 58 1/min , Nominal rotation speed : 58 1/min
Vacuum pump, Flow rate (m3/h): 35, Elec: 400 V / 50 Hz , Engine: Brook Crompton 1.5 kW
80 litre stainless steel tank NEP cleaning ball 5 tappings 1 tapping of 22 mm 1 tapping of ca 38 mm 1 tapping of ca 44 mm 1 tapping of 72 mm 1 tapping of 72 mm, Volume: 80 liters , Cover diameter: 400 mm, Tank bottom outlet: Yes, Tank bottom diameter: 35 mm, Event: 1, Mobile tank: Yes, Weight (kg): 85 , Calculation temperature (°C): 143, Design pressure : -1 / 3.3 bar , Pressures test: 5.3 bar , Operating pressure: -1/3 bar , Porthole: 1, Maximum allowable pressure: 3.3 bar
Double-walled stainless steel tank Manufacturer GOAVEC Capacity 105 liters CIP ball, Volume: 105 liters , Hustle: Tank bottom, Elec: 400V, Engine: DR drives type TS71A4, Engine power: 0,25 kW, Cover diameter: 500 mm, Tank bottom outlet: Yes, Tank bottom diameter: 22, Event: 1, Mobile tank: No , Double envelope: Yes, Double envelope volume: 8 liters , Design pressure (double jacket) : 2.2 bar , Maximum admissible temperature (double envelope): 95°C , Proof pressure (double jacket): 3.5 bar , Operating pressure (double jacket) : 2 bars , Double envelope fluid: Water , Operating pressure: -1/3 bar, Pressure calculation: -1 / 3.3 bar, Operating temperature: 0 / 143°C , Calculation temperature: 143°C , Pressures test: 5.3 bar, Top nozzle: 1, Side tapping: 1, Porthole: 1
MULLER mobile lifting column / jib with 1/2 rotation of the tank Sold with 5 tanks: 1 tank of 100 litres 2 tanks of 200 litres 1 tank of 150 litres 1 tank / hopper, with powder valve, of 90 litres, Load capacity (KG): 150, Load Capacity (KG): 150, Weight (kg): 490, Maximum height at the axis (mm): 2500, Maximum lifting height at the axis (mm): 2500, Link to manufacturer: .mueller-group/en/processing/product/mobile-lifting-column.html, Grip diameter: 560 mm
Edmund Buehler orbital shaker With stirring intensity and timer adjustment, Elec: 230V 50/60Hz 0.2A, Dimensions (mm): 670x610 H250mm, Agitator type: Orbital, Minimum / maximum stirring speed: 15/300, Minimum / maximum stirring height: 30 / 420, Internal dimensions (mm): 390x540mm H150mm
Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150 , Powder outlet height (mm): 695
Single envelope tank 2 mixing accessories as well as the stirring/kneading accessory, Elec: 340 V / 50 Hz / , 1/min: 1420 / 2800, Capacity of the tank : 12 liters , Charge capacity: 2 to 8 liters max
Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1100, Powder outlet height (mm): 815
Allgaier vibrating screen, Sieve diameter:: 470 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 230/400 V , Engine: Elektror Motor , Dimensions (mm): 1100x700 H 1200, Powder outlet height (mm): 765
GS-INDUSTRIESERVICE
