Manufacturer:
(Category: 705)
Vibrating screen Sold without its screen, Dimensions (mm): 700x920 H 1085, Sieve diameter (mm): 510, Engine: italvibras g.silingardi , Engine power: 5.42 kN 50 Hz, ATEX: Yes (ATEX II 2 D)
AVERY DENNISON label maker. ALX 720 print head., Elec: 400 V / 50 Hz , Maximum format (width) mm: Less than 60 mm , Maximum cadence / minutes: ca 60 products / minutes , Pressure: 4-6 bars , Print speed: 2 to 30 m/min , Conveyor dimensions (mm): length: 2000 mm / width: 82 mm
Semi-automatic filling machine BÜNDER SCHMITT Previously used to fill 50,100,250 ml bottles, Elec: 220 V, Dimensions (mm): 610x610 H 2120 , Pump: KNOLL: MX20S, Number of pumps: 1, Flow rate l/h: 5 to 5,600 , Maximum pressure (bar): 40 , Hopper volume: 16 Liters , Viscosity: 200,000 mPas, Temperature (°C): -30°C to 140°C
FETTE Data Control 2 Installed in a mobile cabinet including an EPSON printer
Tilting mobile tank Dimensions between wheel arch: 645 mm Tilting height: 560 mm, Volume: 76, Useful volume: 50 L , Pneumatic: 2 bars , Cover diameter: 440 mm, Tank bottom outlet diameter: 36 mm, Mobile tank: Yes, Double envelope: Yes, Dimensions (mm): 850x850 H 1250, Side tapping: 1
Tablet tester. Manufacturer data: Weight Measuring range: 0.01-50 g Resolution: 0.0001 g Accuracy: ± 0.0003 g Solidity Measuring range: 10-40 N Resolution: 1 N Accuracy: ± 1 N Thickness Measuring range: 1- 20 mm Resolution: 0.01 mm Accuracy: ± 0.1 mm Accuracy Measuring range: 1- 30 mm Resolution: 0.01 mm Accuracy: ± 0.1 mm, Elec: 230 V , Dimensions (mm): 760x430 H 610
FETTE Terminal Data Control Type 2080 Year 1989
Sterile/Aseptic Containers Manufacturer : Vogelbusch Capacity: 18100 liters Technical specifications : Cylindrical, upright stainless steel tank with double jacket Weight 3950 kg Loading room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Material 1.4435 Boiler room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Capacity 230 litres Material 1.4404/316 l/ the container was used in the pharmaceutical industry for sterile water Insulating sheet outside is screwed would have to be partially replaced, since the container is insulated with glass wool, the sheet was deformed during transport. Equipment: Manhole Hand hole DN 200 Cip nozzle DN 50 2x sight glass Rupture disc Cooling/heating jacket inlet and outlet DN 25 GMP Various supports Manhole: DN 500 Documents: ...
Drum mixer with bagging flap, solid very heavy version, drum and mixing spiral stainless steel. Year of construction not known. Three-phase motor rewound, condition see pictures
1200 litre process vessel Manufacturer Prai HiPurity Systems Ltd. Type IMV – 1200 W, H – 14471 unused Year of construction 2015 electro-polished Double-jacket, pressure-resistant Product room 3 bar Double jacket 4 bar Operating temperature 165° C Magnetic agitator on the underbody, Fabr. Merck Millipur Type GMP Drive 2000 Extensive documentation available, including qualification documents
Nominal cooling capacity 5600-6000 kcal/h Temperature difference input-output 5°C Volume flow max. 20-24 l/min Thermoplastic tank 39 l Mobile Drive 230V/50-60Hz/2.33 kW
Grieser VPL 3,0 L laboratory vacuum planetary mixer suitable for mixing powdery solids, liquids and pastes as well as for the incorporation of fillers, jacketed for heating/cooling, total volume mixing container 3.0 liters, useful volume mixing container 0.3 to 2.1 liters, operating pressure mixing container -1/+1.3 bar, operating pressure jacket max. 3 bar, flow temperature 100ºC, mixing container can be raised and lowered, speed mixing tool 18-393 RPM, speed planet/scrapper 13-176 RPM, material of product contacting parts 1.4404, material dynamic seals PTFE, material static seals EPDM/Silikon, electrics 400V AC/50Hz, total power 3 kW, Siemens SIMATIC S7-1500, machine weight (without container) approx. 300 kg, includes Single Temperiertechnik type CH-6-6-W heating/cooling system (temperature of the circulating medium (water) 0-90ºC, max. operating pressure 17 bar, test pressure 21 bar ...
Plant for filling and packaging aluminium tubes, consisting of: Tube filling and sealing machine IWK TFS 10: For aluminium tubes (double-fold, triple-fold) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube dispensing magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 filling funnel, heatable with electric heating, 1 single-walled filling funnel 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor contro ...
\cf1Indexed machine for double-sided offset tuck-in flap Format range W 15 - 80, H 15 - 60, L 50 - 180 mm Output max. 50 packs/min Tube infeed conveyor from tube filler to cartoner, ascending, 90° angle, built in 2014 Tube transfer station at the product infeed Brochure folding and inserting machine, triple fold Blind embossing printing device opposite insertion side, 2 lines, without embossing numbers Leaflet presence and carton presence check Bad ejection with ejection counter-check Vacuum pump Machine housing with safety switches PLC Siemens S5-100 U 220/400V/50Hz drive Machine was overhauled by Hohenstein in 1995 and 2014 Has worked in line with tube filling and sealing machine 02-0753, see also complete line 13-0113
Stock# U2456-1 Used vertical cosmetic reactor/process vessel by Ekato (DE) model SRA 2500. Tank has total volume 3674 l and working volume from 650 l up to 2500 l. Tank is designed for work on pressure from -1 up to 3 bar, working temperature up to 151 C. Test pressure on tank up to 4.69 bar. Tank is designed in AISI 316L. Tank is layered with stainless steel (AISI 304) heating jacket, volume 190 l. Jacket is designed for work on pressure in range from 0 to 4 bar, working temperature up to 151 C. Test pressure on jacket up to 7.81 bar. Top of the reactor is bolted and has central mounted frame/paravisc type agitator with wall scrappers, driven via reducer and el motor 37 kW, 1465 rpm, 400-690 V, 50 Hz. Working rotation up to 35 rpm. Reactor has central bottom outlet with discharge outlet. There are also included 4 stainless steel legs and tension sensors. Includes technical documentat ...
Color filling control for detection of under-mixing, size, position, fragments and overfilling Adjustable illumination Max. length x width of blister web 180 x 100 mm Application: For tablets/oblongs/coated tablets/hard and soft gelatin capsules Inspection for: Color/presence/size/shape/circumference/location/broken pieces/overfill 21 CFR Part 11 compliant. Touch panel
For packing blisters in folding box cartons Output max. 500 cartons/min, the max. speed depends on the format/product Folding carton format range max. W 80, H 90, L 155 mm For double-sided offset or same-sided tuck-in flaps Blister stacking device Max. 10 blisters per stack / max. height 85 mm Blister refill chute, manual 3 suction arms for folding box pick-up and counter-suction for pre-breaking MB-Bäuerle CAS 21/4 net leaflet folding and inserting machine from the magazine Color embossing printing unit on both sides Faulthy package ejection with counter-check HMI B+R Automation, IPC Beckhoff Servo controller Elau MC-4 with control unit Elau C600 Drive 400V/50Hz, rated current 6A / back-up fuse 25A Various accessories such as format parts / spare parts Infeed blisters via Flexlink conveyor
overhauled suitable for installation in a folding box cartoner type C 2205 2-fold arm
Conveying height 1,290 mm Inlet height 620-780 mm Tablet diam. 3-25 mm Deduster path total length 15 m Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h 2 inlet adapters: rectangular 115x80 mm and round with diam. 60 mm nozzle Programme control C920 with HMI Allen-Bradley Panel View Plus 600 Distributor V4000 with 6 outlets, automatic/manual change of outlets selectable via HMI Metal check Lock Met 30+ with its own HMI Bad ejection into glass container PLC Allen-Bradley MicroLogix Drive 100-240V/50/60Hz Nozzle for dust extraction Mobile
Used Manesty tablet press model D4. Pressimng force -100 kN (10 tton). Capacity 60000 tablets per hour. Max filling depth -20,5 mm. Max tablet diameter – 25.4 mm.
Used Fette tablet press model Perfecta 3000. 45 station. Initial pressing force 230 Kn. Main pressing force 100 Kn. Max tablet diameter – 16 mm. Max tablet filling depth 18 mm. Capacity 486000 tablets/hour. EU-B 19 mm tooling with the machine. Machine manufactured in 1995, overhauled in 2004.
Used tablet counter made by Swiftpack Automation Ltd. England (Now IMA Group_. Model M1366. Year of manufactury 1996. Power 2.5 kW. More info available upon request.
Used stainless steel semi-automatic capcule filler Capsugel/Lonza Ultra III model CU-4204. Capacitu depending on product, operator and aplication between 4500-33000 capsules per hour. Powder feeder. Control Panel. Year of manufacturey 2019. Overall dimentions: width 1520 mm, depth 890 mm, height 1910 mm, weight 610 kg. Technical docuemtnation for the machine available.
Used double cone mixer. Total capacity 250 liters. Year of construction 2001. Material of construction - mixer made entirely of stainless steel. Engine power 2.2kW. Adjustable speed in the range of 5-13 rpm. Manufacturer's technical documentation available.
SG Innoscan CVTCorecvSIGx inspection machine for vials, etc., rotary infeed table, total of 7 camera inspection stations with automatic height adjustment, Particle 1+2 (inspects for moving particles), side inspection (inspects for filling level, cosmetic defects of barrel and crimp defects of cap), top cosmetics (inspects for defects at cap area, scratches, crimp, contamination, displacement of cap, Flip-off inspection), bottom C&C (inspects for chips and cracks at the heel area and on the bottom surface), bottom cosmetics, particle low density (inspects for light particles and fibers), 1 inline outlet + 3 outlet trays, includes format parts for 2R vials, capacity up to 600 vials per minute (machine in excellent condition – hardly used)
\cf1Slim design (space requirement only 0.3 square metres) with electromechanical lift drive Permissible load 1,000 kg Lift mast with floor and ceiling bearing (included in scope of delivery) Overall height 3,700 mm without ceiling bearing Overall height 3,857 mm with ceiling bearing for room height 4,007 mm Operation via remote-controlled touch panel outside the danger zone Jog mode and semi-automated process sequences through the use of a microcontroller with touch panel visualisation Motor with spring-applied brake Button for operating the discharge flap Button for activating the vibrator Safety catch to prevent hazards caused by sudden and unintentional dropping of the load arm Load support for Bohle container MCG 1200 and MCG 1600 (container not included in the scope of delivery) Insertable drum frame with load turning gear for 200 ...
Slim design (space requirement only 0.3 square metres) with electromechanical lift drive Permissible load 1,000 kg Lift mast with floor and ceiling bearing (included in scope of delivery) Overall height 3,700 mm without ceiling bearing Overall height 3,857 mm with ceiling bearing for room height 4,007 mm Operation via remote-controlled touch panel outside the danger zone Jog mode and semi-automated process sequences through the use of a microcontroller with touch panel visualisation Motor with spring-applied brake Button for operating the discharge flap Button for activating the vibrator Safety catch to prevent hazards caused by sudden and unintentional dropping of the load arm Load support for Bohle container MCG 1200 and MCG 1600 (container not included in the scope of delivery) Insertable drum frame with load turning gear for 200 l M ...
Fully automatic machine for cleaning (blowing out) bottles using compressed air Running direction from left to right Connection pressure 6-9 bar, working pressure 0.5-3.0 bar Output max. 12,000 bottles/h Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles Pressure sensor for checking the correct blow-out pressure Extraction of blow-out air and residues below the bottles HMI Siemens Simatic Touch Panel PLC Siemens S7-300 With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) Connection 230/400V/50Hz Has worked together with bottle unscrambler 02-0746 (see pdf)
Top sorting conveyor, width 130 mm, length 600 mm Lower sorting conveyor, width 225 mm, length 700 mm Adjustable belt speed Feed hopper with adjustable vibration 2 sorting lights Various deflection rollers for turning tablets through 180 degrees for different tablet thicknesses: - diam. 110 mm for tablet thickness approx. 5 mm - diam. 115 mm for tablet thickness approx. 7 mm - diam. 118 mm for tablet thickness approx. 9 mm - diam. 120 mm for tray thickness approx. 10 mm - diam. 125 mm for tray thickness approx. 12 mm Drive 220V/50Hz
Bosch (SIG) / Jakob & Wienmeier / OCS / Seidenader / Pester blister packing line comprising of Kraus infeed conveyor for manualy feeding the blisters, Bosch (SIG) HSL horizontal flow pack machine with Koenig & Bauer alphaJET inkjet printer for printing the variable data onto the flow packs including camera print verification, Allen Bradley PLC, 2 (two) Jakob & Wienmeier horizontal cartoning machines type CK05-AV-6/R and CCM-AH-6-600-SV with blister buffer station type CCM-PZ, wolke m600 advanced inkjet printer for printing the variable data onto the cartons including camera print verification, Laetus bar code reader, feeder for booklets, etc., OCS type HC checkweigher (max. 750 g), Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation with wolke m600 advanced inkjet printer, Pester PEWO-pack 250 compact str ...
PHARMA EQUIPMENT
