Manufacturer:
(Category: 212)
Dimensions (L/W/H): 820x410x810 mmWeight: 64 kgTotal power requirement: 2,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1070x495x895 mmWeight: 80 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 750x705x1800 mmWeight: 170 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 945x705x1800 mmWeight: 206 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
NEW - year of construction 2020, PTO-drive, 2/4 fold splitting wedge, 4 m conveyor belt, with log lifter, 10 t splitting force, max. cutting diameter 36 cm, adjustable cutting length 20 - 55 cm, 2 splitting speeds, own weight 675 kg, Hp / kw: 18 hp / 14 kW, Year of construction: 2020
SPECIFICATIONS: Heating capacity: 928 kW - 800,000 kCAL/h Maximum operating pressure: 2 bar Fuel: wood waste Electrical power: 10.6 kW COMPLETE WITH: -Damper flap - Chip hopper - Safety thermostat - Operating pressure gauge - Motor variator - Combustion air blower - Spiral screw - Electrical control cabinet - Burner (EcoFlam MAIOR P 35 TL)
SPECIFICATIONS: Installed power: 3 kW 02 Cotton bags: Ø 450 mm
SPECIFICATIONS: Installed power: 2.2 kW 02 Cotton bags: Ø 450 mm
FB 4500 Conveyor belt Conveyor belt length x width: 250mm x 4.5m Belt speed 0.8 m/s Drive electric motor 400V 1.1kW Weight 245kg Lifting height at 5°: 700mm Head at 45°: 3400mm G&STÜ-5964500
GHHW 1000 Pallet trucks Load capacity 1t Load width 550 mm Fork width 170 mm Fork length 1150 mm Lifting range 90-1600 mm Weight 230 kg G&STÜ-6151016
RLA 1103 Clean air extraction system 400V 1.5 KW Volume flow max. 790 m³/h Suction nozzle 100mm Filter area of 4.1 m² Chip collection volume 135 litres mobile Weight of 116 kg G&STÜ-5131103
volume capacity: 1038 m³/hengine output: 7,5 kWsound - pressure - turn off level ca. max.: 75 dBsuction power: 700 barmotor speed: 2950 min-1range L-W-H: 1,25 x 1,35 x 1,5 mweight: 577 kgElectric 400 Volt: UNUSED Delta Blower Generation 5 rotary lobe blower, type GM 14 L,design B3, size 132 S. Efficiency class IE3. Siemens motor with 3 built-in temperature sensors, soundproof enclosure. Another identical device is available for the same price.Sound enclosure made of galvanized sheet steel with oil drip tray. Painted inRAL 5001 color / front elements in RAL 7047. Segmented design with interior lining and forced ventilation. Fan impeller driven by blower shaft, no additional auxiliary drive required. Sound enclosure suitable for installing multiple units side by side.Transport by forklift is possible. Sound enclosure for outdoor installation,63 mm diameter pressure gauge with connectors, ...
11 KW
2.55 KW
4.3 KW 2850 rpm 4240 m3/ min
4.3 KW 2850 rpm 2440 m3/ min
6.69 KW 3000 rpm 73 m3/ min
liter capacity: 120 lfeed pressure: 218 barcoolant capacity: - lelectrics - voltage/frequency: 380 / 50 V/Hzfilter pump: 150 kWtotal power requirement: 14 kVAweight of the machine ca.: 1,5 tAF-Automatic pre-coat filterwith return-flow cooling of gthe grinding oil and the hydraulicfluidThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Vnenn: 2,950 cbm/h Vmin: 2.251 cbm/h Suction nozzle Ø 200 mm Motor power 3.7 kW Rated speed 2,805 rpm Rated current 7.5 A Frequency 50 Hz, 3 phases Test class H2 Vacuum at Vmin at the interface between dust collector and dust generator (4 m hose) with suction nozzle Ø 200 mm = 2,200 Pascal = 22, with suction nozzle Ø 180 mm = 2,500 Pascal = 25 Filter cleaning by compressed air (to be triggered manually, compressed air connection on site, max. 4 bar) Delivery incl. various chip collection bags
Centrifugal fan / blower / fan Hürner-Funken made of chemical-resistant plastic The housing and impeller of the fan are made of chemical-resistant plastic and suitable for aggressive media in the process exhaust air. Manufacturer Hürner-Funken GmbH 35325 Mücke-Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air capacity / volume flow 2166 / 1900 m³/h Motor power 1.50 KW, 1619/1420 rpm. Pressure difference 1287/990 Pa Conrad Meisenheim electric motor Type DR 90 L-4 No. 304987 1.5 KW, 400/230 V star/delta, 3.4/6 A, 50 Hz Iso F, IP55 1420 rpm, cos phi 0.82 Chemically resistant, corrosion resistant. The centrifugal fans made of plastic are specially designed for pumping chemically aggressive exhaust air. They are characterized by the highest corrosion resistance. In addition, they achieve high volume flows and Pressure differences wit ...
Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)
Key data: 42 m²
Extraction system Filter system Spänex Model ADDITOR U Type II + III – VU – 15 – SBU 165 – S2 – 000 Order number 40132/93 Built in 1993 Filter area 42 m² Filter bag material needle felt, in very good condition Capacity 64,200 m³/h 5 chip collection containers each 165 litres Motor vibration With heat return air duct Fire Extinguishing Line With control cabinet With documentation and circuit diagram With fan 7.5 kW Pipe connection diameter on the fan 300 mm Dimensions of the extraction system Frame with container Overall height 2971 mm Overall width 980 mm Length of the extraction system approx. 3600 mm Plus add-on parts The plant has already been dismantled and Ready for loading from stock
Lamier FL 7B 4kw extraction system Power 4kw Number of bulk bags 2pcs Diameter of bags fi600mm Number of filter bags 32pcs Diameter of filter bags fi 200mm Filter bag length 1550mm Bag shaking system Inlet port diameter 300mm CE Certified Dimensions: height 370cm, width about 260cm, depth 110cm
table length: 1300 mmtable width: 800 mmstroke height: 1010 mmweight max. in kg: 2000 kg: 190 mmconnected load frequency: 400 Vtotal power requirement: 0,75 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.weight of the machine ca.: 0,28 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the dryer: -number of chambers 3 – capacity of one chamber 90 m3 -chamber size 9.6x7.3x4.1 m – total dimensions of the chamber 10.2x7.5x5.4 m - type of wood hard, -final humidity 10 +/- 2%
table length: 2200 mmtable width: 1500 mmstroke height: 1900 mmweight max. in kg: 3000 kgtotal power requirement: 1,5 kWstroke speed - idle stroke upwards: 55 sek.stroke speed - idle stroke downwards: 30 sek.connected load frequency: 400 Vweight of the machine ca.: 0,650 tdimensions of the machine ca.: 2,2 x 1,5 x 0,3 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2200 mmtable width: 1500 mmstroke height: 1850 mmweight max. in kg: 2000 kg: 260 mmtotal power requirement: 1,5 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.connected load frequency: 400 Vweight of the machine ca.: 0,45 tdimensions of the machine ca.: 2,2 x 1,5 x 0,26 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 71 m², 825 kg, 2640 mm
Clean Air Dust Extractor RL350 Extraction connection on the right Nominal volume 8,000m³/h H3 GS dust-tested Jet cleaning Chip container capacity 500l Electrics RL350 FU 11kW Extinguishing device powder extinguisher 12kg More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group
Key data: 71 m², 825 kg, 2640 mm
Clean Air Dust Extractor RL350 Extraction connection on the right Nominal volume 8,000m³/h H3 GS dust-tested Chip container capacity 500l Electrics RL350 FU 11kW Extinguishing device powder extinguisher 12kg More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group
Guiding machine / measuring machine Year of construction 2025 7.5 kW Filter area 32m^2 Intake manifold: 300 Dimension: LxWxH: 3,650x1,540x2,570
Henrik Winter Holztechnik GmbH
