pe pipe used for sale

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm

PEDESTAL:. - Hole pattern for robot : Kuka heavy load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm

PEDESTAL:. - Hole pattern for robot : Kuka heavy load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm - total weight approx.:460 kg

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kg Technical description : KUKA Robot Pedestal with drilling pattern for Kuka robot KRC2. KR 210 robot was mounted. Total height 1200 mm.

Lot of MIG welding wire steel G3Si1 rolls - Ø1.0 mm (D300 / 15 kg per roll) Weight: 725KG net

Grooving machine Foellmer 45ME Year of construction 1998 Art.Nr. L1008

Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Machine number: FG3721 for all other technical data see photographed nameplate

300 watt, Embossing Pernuma Perfoset E/P including engraving Pernuma Perfoset E/P including engraving Ø 75 mm. Embossing stamp for frequent use. Maximum print dimensions: Ø 73 mm. Stamps paper, photos, thin cardboard (up to 120g/m²) Very suitable for securing official documents

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified

Incl. automatic feeding, basket size 475x320x200 mm, loading weight working chamber 80 kg, minimum cycle time 7.5 min, connected load 25.5 kW, system weight empty 1700 kg, loading max. 800 kg

Krones Air Conveyor diverter from 1 to 2 for PET air transport

Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / Year of construction 1972 Groove comb with two thicknesses Perforating comb Functioning Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / year of construction 1972 Grooving tool with two thicknesses Perforating tool Working condition

1 litre, Stock number: R1172, Litre: 1, Material: Stainless steel AISI 304, In stock: Yes, Item: Mixer, Amount in stock: 1 pc., Standing: In a cabinet, Double jacket: Yes, Agitator : 2 pcs., Agitator placement 1: Mixing agitator in the bottom, with variable speed, Agitator placement 2: Blend agitator in the side, with variable speed, Cover: In the top, Inner diameter: Ø 90 mm., Outer diameter: D 140 mm., Dimensions: L 650 x W 500 x H 1600 mm., Manufacturer: Baker Perkins, Type: Novamix

Stock number: F1103, Size: L 300 x W 540 x H 250 mm., Theoretical capacity: Max 1440 pcs/hour, In stock: Yes, Amount in stock: 1 pc., Item: Stretch film packing machine, Manufacturer: Pester, Type: PEWO-Pack 450 SN, Year: 1990, Documentation: Yes

Stock number: F950, Bundler, Pester Pewo-Pack 200 SN,, for stacks and bundles items.

Stock number: R351, Pectin agitator, stainless steel,, 18,5 kW motor, 2900 rpm, 380/420 V., Flange mounting in the top., D 240 mm head., Material: Stainless steel AISI 304, Head: D 240 mm.

350 litre, Stock number: T3407, Litre: 350, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm., CIP: Yes, Working temperature: 20° - 130° C, Working pressure tank: -1 - 2,5 Bar, Working pressure double jacket: 2,5 Bar, Inner diameter: Ø 690 mm., Outer diameter: D 900 mm., Total height: 1400 mm., Manufacturer: Strøm & Pedersen, Year: 1992, Other: The tank is polished on the inside

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, capacity: 100-3.000 KG.

GAMMA MECCANICA WATER RING PELLETIZER, Model TDA 6, stainlesse steel housing and all parts in contact with water, star blade holder for 4 knives, throughput rate 2,0 Tons/h depending on materials and feeding rate, constructed in 2013, complete with stainless steel drying centrifugeù, screen basket in stainless steel, control panel, photos taken before reconditioning, the machine is offered totally reconditioned, capacity: 2.500 kg/h

elektrische Rillmaschine - Perforiermaschine / eletric Creasing - Perforation machine

Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur GearServo Drive, Gear Motor, Servo GearType:1FT6105-8SF71-3EG1Series No. YF P921 8717 03 001Year of Manufacture: 2002Nominal Torque = MO: 54/65 NmNominal Current = Io: 36/45 ADreh Number = n. max.: 4500 rpmSpur Gear ALPHATyp: SP 210-MF2-20 -021-000Shaft Diameter 75 mmStump Shaft Length 105 mmCentering Diameter 180 mmCentering Diameter 35 mmBolt Circle Diameter 250 mm / 4 x 17 mm BoresHousing Dimension L/W/H 725 x 225 x

Rear grinding machine with permanent magnetic clamping plate JUNG type HA 20EquipmentNo: 3344Profile depth: max. 15 mmAngle adjustment: 0 to 2Magnetic plate: 115 x 115 mmClamping range: 110 x 75 mmHeight magnetic plate: 119 mmWorkpiece dimensions L x W x H: max. 60 x 100 x 50 mmPower consumption: 1 ampereOperating voltage: 24 volts, direct voltage (V/DC)- mechanically switchable permanent magnetDimensions L x W x H: 500 x 200 x 125 mmWeight: 25 kggood conditionSuitable for cutting tool mold making for conical background cutting plates or

Permanent Magnet DC Servo Motor SIEMENSTyp: 1 HU3074-0AC01-ZNR. B J157 1047 01 008Voltage = 167 Volts DC = DC voltagePower = 1.8 kWScurrent consumption = 12.5 AmpereSpeed = n. max.: 2000 rpmNominal torque = Mo 7 NmShaft diameter 24 mmStump shaft length 50 mmCentering diameter 130 mmBolt circle diameter 165 mm / 4 x 11 mm Bore shaft with 8 mm keywayHousing dimension L/W/H 335 x 140 x 145 mmWeight: 23 kgGood condition; used

Electric walking forklift, ride-on pedestrian stacker STILL type EGV 14Fabr. No. 330221900092 year of construction 2009Nominal load capacity 1400 kgLifting height 5475 mmFork length 1160 mmTotal length 1930 mmTotal width 860 mmOverall height 2330 mmOperating voltage 24 volt- Triplex mast with 1830 mm Free lift- 689.3 operating hours read- Battery from year of construction 08/2008, type 3 PZS 315 (24Volt / 315Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1440 kgGood condition, battery bad. Surcharge

Electric walking forklift, pedestrian stacker JUNGHEINRICH type EJC 14G-115-290ZTSerien. No. 80582366 year of construction 1997Nominal load capacity 1400 kgNominal lifting height 2900 mmFork length 1150 mmTotal length 2000 mmTotal width 850 mmOverall height 1900 mmOperating voltage 24 volt- Duplex mast without free lift- 5721 operating hours read- Battery from year of construction 2014, type 24 V 3PzS 345 (24Volt / 345 Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1050 kggood condition; used

Electric walking forklifts, pedestrian stackers JUNGHEINRICH type EJC 214 series. No. 90334640 year of construction 2009Nominal load capacity 1400 kgNominal lifting height 3200 mmFork length 1150 mmTotal length 2000 mmTotal width 810 mmOverall height 2050 mmOperating voltage 24 volt- Duplex mast with 1600 mm free stroke- 4356 operating hours read- Battery from year of construction 2009, type 3PZS 375 (24Volt/ 375 Ah)- Automatic charger Jungheinrich 24 Volt, 40 Ampere- TÜV test UVV until 11.2025Weight 1200 kggood condition; used

SPECIFICATIONS: Workbench dimensions: 4000 x 500 mm Saw blade: Ø 450 mm Installed power: 5.5 hp

Key data: 132 , 40 , 750

Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours

Key data: 90 , 40 , 510

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

PET machine for items up to 1.5 ltr. Equipped for PCO 1881. Moulds in 500 - 750 - 1,000 - 1,500 ml optionally available. Voltage 400V 50Hz. Power for bottles in 1,500 mL. 21,115 per hour. Machine can be viewed in operation

A thickness measuring device Scantech is available. Measuring frame width: 2500mm, sensor power: 5keV-15keV, max. web width: 2100mm, max. web speed: 200m/min, product tolerance at 57µm-63µm: +/-5%, measuring accuracy at 60µm: +/-0.3µm, max. ambient temperature: 45°C, orientation: Left-B. Machine dimensions X/Y/Z: approx. 3250mm/300mm/900mm, weight: approx. 400kg, control: Flexscan 6, interface: OPC-UA. Components: scanner, HMI, IO box, and various small parts. Documentation available. An on-site inspection is possible.

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...

Height=1.1 m, Overall length= 0.65 m, Overall width= 0.45 m, Net weight= 68 kg,

Height=1.05 m, Overall length= 0.62 m, Overall width= 0.55 m, Net weight= 64 kg,

Height=1.51 m, Overall length= 1.77 m, Overall width= 1.04 m, Net weight= 173 kg,

Height=1.41 m, Overall length= 0.65 m, Overall width= 2.33 m, Net weight= 250 kg,