We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,840 used machines on RESALE, but how to find them? Machine Search
used
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: OKA Type: TBA Depositor working width: 450 mm different: wire cutter moveable on rolls workingtable folding I offer this machine in as-is where it is condition ex warehouse Hessisch Lichtenau, unpacked
used
CNC control, numeric control, CPU rack made of OKUMA LB 10 OKUMA type OPUS 5000 CPU /IF RACK 9A SKU: E7191-292-325-1 Year of construction 1985 Ser. Nr.: 003184 Dimension W x H x D 390 x 345 x 240 mm The device is still installed ready for operation in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used
used
Description: Including the tools located on the tool turrets, a 3-jaw chuck, a chip conveyor, foot switch Drehlänge: 800 mm, serial number: ^12013, control: FANUC SERIES O-TT, toolchanger positions: 2 x 8, number of controlled axes: 2, spindle bore: 60 mm, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,300 x 2,300 mm
used
Description: control: OSP3000 travels X-axis: 300 mm Z-axis: 750 mm swing diameter: 400 mm spindle speed range: 65 - 3500 rpm power consumption: 41 kW accessories: 3-jaw chuck special chuck tool holders  , please also have a look at the videos of this machine x-motion: 300 mm, z-motion: 750 mm, control: OSP3000, turning speed range: 65 - 3500 rpm, total power requirement: 41 kW, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,000 x 1,800 mm
used
Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Connection: kW 400 V
used
OKUMA MACHINING CENTER MODEL: MX-60HB TABLE: 630X630 mm X-AXIS STROKE: 1000 mm Y-AXIS STROKE: 810 mm Z-AXIS STROKE: 800 mm TOOL WAREHOUSE: 150 SEATS CONTROL: OSP-E100M
used
Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use
used
OKUMA MACHINING CENTER MODEL: MA-400HA TABLE: 400X400 mm Nr. PALLET: 2 X-AXIS STROKE: 560 mm Y-AXIS STROKE: 610 mm Z-AXIS STROKE: 625 mm ATTACK: HSS63 TOOL WAREHOUSE: 60 SEATS CONTROL: OSP-E100M
used
Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 2000 A Suction capacity: 2065 m ³/h Engine: 5.5 KW Cat. No.: PP W61 000 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation
used
Manufacturer: OKU Type: VZ 750 K-R Plate diameter: 750 mm Adjustable vibration
used
Key data: 530 Okuma, 1000 OSP-U100, 12
Turning diameter: 530 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP-U100 Max. turning Ø: 530mm X-Axis: 280mm Z-Axis: 1.000mm Spindle bore: 100mm Speedrange: 4500Rpm Spindle power: 15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor: Yes Tool eye: Yes Pinole taper: 5Mk Stroke pinole: 120mm Quill Ø: 90mm Length: 2.200 mm Width: 2.000 mm Height: 2.200 mm Weight: 6.200 kg
used
Turning diameter: 580 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP P 200 L Okuma - Space Turn LB 3000 MY CNC Lathe with C / Y Axis MACH - ID 6346 Make: Okuma Type: Space Turn LB 3000 MY Control: OSP-P200L YOP: 2006 Max. turning Ø 580 mm X-Axis 260 mm Y-Axis 115 mm Z-Axis 1.000 mm Spindle bore 80 mm Speedrange 4200 Rpm Spindle power 30 kW ATC / revolver 12 Speed live tools 6000 Rpm Control OSP-200 Chip conveyor Yes Tool eye Yes Dimensions Length 4.400 mm Width 2.430 mm Height&nbs ...
Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Supply: 400 V kW space: 3100 x 2500 x 2750 mm weight: 7500 kg
used
Manufacturer: OKI Model: Pro9431dn Year: December 2018 Equipment: incl. Paper tray 3x500 sheets Counter: 203815 SW and 73367 Color Availability: In stock Defects: none, as good as new as it was only used as a backup machine Price: on request
used
Turning diameter: 580 mm Turning length: 565 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP -P 200 L Okuma - LB 2000 EX CNC Lathe with Sub spil MACH - ID 6345 Make: Okuma Type: LB 2000 EX Control: OSP-P200L YOP: 2006 Max. turning Ø 580 mm X-Axis 260 mm Z-Axis 565 mm Spindle bore 62 mm Speedrange 6000 Rpm Spindle power 20 kW Subspindle speeds 4000 Rpm Subspindle bore 40 mm ATC / revolver 12 Dimensions Length 3.200 mm Width 2.300 mm Height 2.290 mm Weight 3.400 kg
used
Turning diameter: 903 mm Turning length: 1000 mm Turret positions: 0 CNC Brand: Okuma CNC Model: OSP 700 L MACH-id 5585 MAKE OKUMA TYPE LU 45 M YOP 2001 SPECIFICATIONS Max. turning Ø 903 mm X-Axis 440 mm Z-Axis 1090 mm Spindle bore 110 mm Speedrange 2800 Rpm Spindle power 45 kW Speed live tools 2000 Rpm Control OSP700L Chip conveyoryes Pinole taper 5 Mk Stroke pinole 170 mm Quill Ø &nb ...
used
OKUMA MA – 400 HA hours switched ON 37572 Hours spindle rotating 16725 Horas Year 2007 Okuma Lathes Okuma LU 15 M – 1000 OKUMA LB 15 OKUMA Multus B300 Okuma VTM 200 OKUMA Genos L3000 MA-550VB; MA-650VB; MA1250; MA12500; MA40; MA400; MA50; MA500; MA550; MA60; MA600 MA6005; MA600HBII; MA650 Okuma LU 15 M – 1000 OKUMA LB 15 OKUMA Multus B300 Okuma VTM 200 OKUMA Genos L3000 Okuma GI-20N OKUMA Multus B300 Okuma LU 15 M - 1000 OKUMA LB 15 Okuma VMC MC-V4A with 4th axis Okuma ACE Center MF-46VA OKUMA LB 15 OKUMA VTM 1200 YB OKUMA MX 45 CNC Machining Centre OKUMA LB15 Okuma LU 45 M OKUMA LT 300 M Okuma MX45VAE Machining Center Okuma VTM 200 1ST OKUMA LT 25-MY CNC Lathe Okuma MX 40 HA OKUMA LB 15 OKUMA MA-50HB OKUMA GENOS M460R-VE Okuma LC 40 Okuma LC 40 OKUMA MC-4VAE OKUMA Twin Star LT 300 M OKUMA MC 40 VA Okuma LR 15 2S 600 Okuma ...
used
:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...
used
Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...
used
We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.
used
X- / Y- / Z- strokes: 670/560/560 mm Pallet dimensions: 500x500 mm Max rpm : 12000 rpm Engine Power: 5.5 KW No. of tools: 60
used
Okuma MB 56 VA Vertical Machining Center Control Unit : OSP U100M X/Y/Z : 1050 mm / 560 mm / 460 mm Machine is in good working condition
used
Okuma MA400-HA Horizontal Machining Center X : 560 mm Y : 560 mm Z : 600 mm Table size: 400x400 mm High pressure pump
used
Okuma LB35 II CNC Lathe Maximum turning length: 2000 mm Maximum turning diameter : 600 mm 18 inches chuck(SMW) IGF program Machine is in very good condition Turret VDI50 holder Some tools will be given together with the machine All maintenance has been done
used
The machine is currently in production! Driven tool C-axis machine. It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12
used
The Okuma Genos LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12
used
Okuma MA- 60HB Horizontal Machining Center Machine is in good condition
used
The condition is as good as new. The device was only used for one test in 2005. The AERO-LÄP method makes it easy to achieve a highly smooth and glossy surface without damaging the surface structure. By applying a unique technology, AERO LAP enables high-gloss finishing for irregular shapes of punches, dies, pens and small shapes. STANDARD ACCESSORIES - Standard machine complete with nozzle, centrifuge, air connection and all the equipment needed to operate 400 V, 50 Hz - CE version - Mixer unit for processing the multigrain -Gloves - Operating tools, cleaning brushes, etc. - Instruction manual in local language - Instruction and maintenance manual, electrical wiring diagram - Machine painting Standard Okamoto silver grey Options Mixing bowl 4 pieces Multi Corn Multi Liquid Multi Powder (Pure Diamond Powder) Overall dimensions: Width: 750 mm Height: 160 ...
used
Okuma MA50HB HORIZONTAL. 10,000 revolutions. 60 tools. Renishaw and presetting. Perfect conditions
used
Used Okuma MA50H / 1000 Machining center - palletized Year 2001 Cnc Okuma Ops U 100 M X 700, Y 800, Z 700 Table 500 x 500
used
control: OSP 5000L-G greates pass round over bed: 450 mm turning diameter: 400 mm turning length: 730 mm Tool turret 12 positions: transmission ratio: 4 chuck: 300 mm total power requirement: 35 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 3890 x 2880 mm BIG MASCHINE 450 X 730 MM 2 TURRET CNC CONTROL OSP 5000 L WITH OUT TAILSTOCK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 760 mm Table width: 300 mm Number of T-channels: 3 T-channel width: 17 mm Distance of the T-slots: 100 mm Table load max.: 420 kg Longitudinal travel (X-axis): 750 mm Transversal travel (y axis): 400 mm Cutting speed: 35 m/s Diameter of grinding wheel: 355 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 127 mm Grinding wheel speeds fix: 1500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 7.5 kVA Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2800 mm Width: 1900 mm Height: 1760 mm Various accessories: Paper filter facility Electrical magnetic chuck Length: 600 mm Width: 300 mm Digital readout number of axis:: 2 Lamp
used
Code 5284 UMSCHREIBUNG CNC Bohrmaschine Fabrikat Okuma Typ DCN - 4 Maschine Nr. 55020239 Steuerung OSP - 330 Diameter Aufspantisch (4x) Ø 400 mm Einbauhöhe Tisch-Spindel 400 – 200 mm Spindel Hub 200 mm Schnellgang vertikal 12.000 mm/min. Vorschübe 5 – 1200 mm/min. Spindeldiameter 45 mm Spindelaufnahme MK 3 Anzahl Spindelstufen 8 Stufen Geschwindigkeiten 125 – 3150 UpM Anzahl Werkzeugaufnahmen 10 St. Motor 1,5 kW 380 Volts Maschinemasse ( L x Br. ) 1540 x 1750 mm Höhe 2100 mm Gewicht 2000 kg Zustand normale Zustand
used
The machine is in good technical condition. Spindle passage: 42mm Counterspindle Lots of accessories included - collets, counterspindle jaws, double sided tool holders, some spare parts. Original technical documentation for the machine (instructions, diagrams, etc.) Bar feeder included. By prior arrangement, the possibility of a tour in progress.
used
This OKUMA 2SP-V80 Lathe was manufactured in the year 2002. It is equipped with a twin turrets and spindles. The machine disposes of a 2 chip conveyors with rear exit, 2 3-jaw Hydraulic chuck and a remote manual pulse generator.
used
OKUMA MX 45 VAE TECHNICAL SPECIFICATIONS CNC model Okuma OSP Cnc version OSP 700 M Tool mount BT 40 Spindle power 11Kw Kw Number of Spindle Revolutions 7000 Tool number 30 X-axis travel 762 mm Y-axis travel 460 mm Z-axis travel 450 mm Rapid advances linear axes X Y Z 30 30 24 m/min Table dimensions 1000x460 mm Roller guides High cooling pressure Pressure value 15 bar System with external tank with filter yes Dredging chip evacuator
used
This Okuma LB3000 EX II Lathe was manufactured in the year 2017 in Japan and has 7971 production hours, of which 3397 are cutting hours. It is equipped with an Okuma OSP-P300LA control unit. The machine has a spindle speed of 5000 rpm.
used
This OKUMA Multus B300 Lathe machine was manufactured in 2010 in Japan. It is equipped with an Okuma OSP-P200L-H control unit. This machine has 5 simultaneous axis. It includes a 3 Jaw chuck (Kitagawa B208 / BB208) and has a chip conveyor (hinged belt). The machine is still under production and can be visited at any time. See photo and video gallery for more detailed impressions. Contact us for more details!
used
Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 300 mm Grinding length: 600 mm Min. grinding length: 300 mm Table load max.: 420 kg Longitudinal travel (X-axis): 750 mm Cross travel (z-axis): 340 mm Transversal travel (y axis): 360 mm Table speeds: stepless from: 0.3 m/min up to: 25 m/min Grinding wheel speeds fix: 1500 rpm Diameter of grinding wheel: 355 mm Width of the grinding wheel: 38 mm Drilling cap. of grind.wheel: 127 mm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 3.7 kW Total power required: 10.8 kVA Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2740 mm Width: 2100 mm Height: 1800 mm Various accessories: Coolant system Paper filter facility Electrical magnetic chuck Length: 600 mm Width: 300 mm Vice: width: 125 mm Lamp Set of grindi ...
used
Grinding length: 650 mm Grinding width: 230 mm Grinding height: 350 mm Wheel diameter: 225 mm Spindle power: 1 kW MACH-id 5557 MAKE OKAMOTO Japan TYPE ACC 52 EX YOP 1999 SPECIFICATIONS X - Travel 650 mm Y - Travel 230 mm Z - Travel 350 mm Table Length 550 mm Table Width 200 mm Table load 100 Kg Grinding stone dimensions 225 x 20 x 50,8 mm Power 1,5 kW Speeds 2800 Rpm Coolant system yes DIMENSIONS Length ...
used
Grinding length: 800 mm Grinding width: 440 mm Grinding height: 500 mm Wheel diameter: 0 mm Spindle power: 7 kW CNC Brand: Fanuc MACH-id 4302 MAKE Okamoto TYPE ACC 64 CA1 YEAR 2009 SPECIFICATIONS Controll FANUC Cylindical / Surface / Other Surface X - Travel 800 mm Y - Travel 440 mm Z - Travel 500 mm Electro magnetic table 600 x 400 mm Work piece weight 1000 Kg Grinding wheel size 405 x 127 x 50 mm kW power on spindle 7.5 kW Spindle speeds / ranges 2800 Rpm Coolant / Filtration / Yes DIMENSIONS Length ...
used
Grinding length: 950 mm Grinding width: 440 mm Grinding height: 500 mm Wheel diameter: 0 mm Spindle power: 3000 kW CNC Brand: Fanuc MACH-id 4104 MAKE OKAMOTO Japan TYPE ACC 95 EX YEAR 1998 SPECIFICATIONS Controll FANUC in 2 Axis Cylindical / Surface / Other Surafce grinder X - Travel 950 mm Y - Travel 440 mm Z - Travel 500 mm Electro magnetic table 800 x 400 mm Work piece weight 500 Kg Spindle speeds / ranges 3000 Rpm Coolant / Filtration /Yes DIMENSIONS Length 4870 mm Width 2690 mm Height 2400 mm
used
This OKUMA LT10-M Lathe was manufactured in 2000. It is equipped with a Siemens 840 D control unit.
used
Turning diameter: 300 mm Turning length: 1000 mm Turret positions: 0 Positions ATC: 60 Number controlled axis: 0 CNC Brand: Okuma CNC Model: Loading Robot Make Okuma MACTURN Type MACTURN 30 W Year 1999 Multi tasking mill turn drilling machine Centre height (mm) Swing bed = 300 Center distance (mm) Length = 1.000 Spindle bore ATC 60 positions OKUMA Loading robot Full B axis Full C Axis
used
This OKUMA TWIN STAR LT200-M Lathe was manufactured in the year 2004 in Japan. It is equipped with an OKUMA P200L control unit. The machine has a spindle speed of 6000 rpm.
used
This Okuma VTM-200 1ST Lathe was built in the year 2009. It is equipped with an OPS P300S control unit and has 17700 hours, of which 5375 are cutting hours. The machine has a spindle speed of 4500 rpm and has been regularly serviced and well maintained, service history available.
used
This OKUMA LT10 Lathe was manufactured in the year 2002. It is equipped with a Siemens 840 D control unit.
used
This OKUMA LT10-M Lathe was made in 2001. It is equipped with a Siemens 840 D control unit.
used
This OKUMA LB 200M Lathe was made in 2000. It is equipped with a Okuma OSP 100L control unit and has 3 axis. The machine has a spindle speed of 50-6000 rpm, is in good condition and well maintained.
used
This OKUMA LT300-M Lathe was manufactured in the year 2003 in Japan. It is equipped with an Okuma OSP-E100L control unit. The machine has a spindle speed of 38-5000.