nea used for sale

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...

Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches The machine is in very good condition, but must still be thoroughly cleaned before use. neat and smooth running Viedo available via test run

Condition: neat Availability: as of now Shelf trolley: included

6 bicycles, ideal e.g. for internal load transport, company bike Monark – used - : Price per piece from location: 200.-€ (net)! Manufacturer: Monark (Sweden) Type: Workbike Year of manufacture: unknown with easy-to-use center bike stand 26 inches With luggage rack / storage front and rear Low entry Quick-release fastener for height-adjustable seat Condition: good, hoses may need to be repaired, whether the lighting works is unknown Available: now Location: Niedernberg near Aschaffenburg

Offered are 500 pieces of a 3in1 contactless infrared fiber thermometer - new in original packaging -. These come from an overstock at our customer and are currently offered with an MSRP of € 24.99 each. There are a total of approx. 3420 pieces. The 3in1 contactless infrared fiber thermometers are still in the factory near Leipzig (Saxony). The sale takes place ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarantee and a warranty with regard to the assets offered through us.

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

Format range: max. 1040 mm min. 50 mm Equipment: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic finishing unit KAS TOP Guard, 8 channel with 3 application heads, Disc gluing unit on the left, feeder with vibrator, mini box device, Primary crusher right and left, kicker, counter, digital position indicators, motorized medium transport in folding, pneumatic, intermittent Press strip. Other: Machine can be inspected in production by arrangement. (very neat condition)

Citrocasa 8000 SB-ATS orange juicer Comes from an insolvent REWE store Built in 2018, but was not in use for the last two years until the eviction The machine makes a very neat impression The protective cover on the left side has a nose broken off. This does not affect the function, the cover can be replaced. There is still cleaning and disinfecting agent in the base cabinet with which the machine can be kept clean and germ-free. It starts up when the tap is actuated, but can also be switched to continuous operation.

Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.

Olympus Iplex IV9420RT Videoscope in neat working condition Scope diameter: 4 mm Scope length: 2 m Angle: 130° Illumination: Ultra-high intensity LED illumination Image manipulations 5X digital zoom, 10 step digital brightness control Gain control 3 step adjustable gain control with exclusive WiDER™ brightness level balancing technology. Sharpness control 4 step adjustable sharpness control Saturation control 3 step adjustable control of color saturation Recording media USB flash memory (1GB standard, compatible with recommended USB flash device) Still image recording Resolution -- H768 x V576 (pixels) Recording Format -- Compressed JPEG format Video recording Resolution -- H640 x V480 (pixels) Recording Format -- AVI MPEG-4 format, Can be played on the Windows Media Player. #8062 Net prices plus VAT

Stephan UM12 Universal Machine Two speeds: 1420/2810rpm Stainless steel boiler with double jacket and temperature sensor socket, removable Stainless steel lid with sight glasses and vacuum connection Manometer Machine is in good condition and runs neat and quiet should be cleaned thoroughly before use Video about test run available

• Non-EX version • Drum fully perforated with mixing paddles • Drum useful volume 331 litres, drum diam. 1,450 mm, opening diam. 550 mm • Batch size 79-265 kg (filling volume 30-100%, density 0.8 kg/dm3) • Volume flow 2,000-4,500 m3/h • 6 spray nozzles with peristaltic pump, spray rate 250-1050 g/min, • Drum drive Motor power 1.5 kW, speed 1.5-13 rpm • Antifreeze heater 68.1 kW • Dehumidification in 2 stages, cooling capacity 75.2 kW, aftercooler 24.3 kW, residual moisture at outlet 2 g/kg • Humidification Preheater heating capacity 53 kW • Main heater Heating capacity 140 kW, air temperature at outlet +90° C • Supply air fan max. volume flow 4,500 m3/h, motor power 7.5 kW • Supply air filter 3 stages M6, F9, H13 • Exhaust air fan max. volumetric flow 4,500 m3/h, motor power 22 kW • Exhaust air filter H13 • Cleaning nozzles Drum outside 2 x ...

Hanwha STL 38 sliding head lathe :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 38mm Headstock stroke (Z1): 320mm - Main spindle speed: 8000 - Number of linear axes: 8 - Number of fixed tool positions on the tool plate: 5 Number of driven tool holder plate tool slots: 4 Rapid feeds for linear axes X Y Z: 32m/min High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 tool-holder-type-first-turret-slide: VDI 30 X-axis-stroke-first-turret-slide: 140mm Y-axis-stroke-first-turret-slide: + - 50mm Sub-spindle: yes Sub-spindle speed: 8000 Power against spindle: 11Kw Bar clearance: 38mm Counter spindle stroke Z : 320mm Number of fixed rear tools: 4 Refrigerant Used: Neat Oil Bar Feed ...

Sliding head lathe Tornos Sigma 20 :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 31i - Model A - Main Spindle Power: 5,5Kw - Main Spindle Bar Clearance: 20mm Headstock stroke (Z1): 230mm - Main spindle speed: 10000 - Number of linear axes: 6 - Number of fixed tool positions on tool plate: 6 Number of driven tool holder plate tool slots: 8 Rapid feeds for linear axes X Y Z: 30m/min High refrigerant pressure: yes Sub-spindle: yes Sub-spindle speed: 10000 Power against spindle: 5.5Kw Bar clearance: 20mm Number of fixed rear tools: 6 Number of motorized rear tools: 3 Refrigerant Used: Neat Oil Bar loader model and brand: Robobar SBF - 532 Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2400mm Width: 1380mm Height: 2050mm Weight: 3000kg

Star SV32 sliding head lathe ::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - TB - Main Spindle Power: 7,5Kw - Main Spindle Bar Clearance: 32mm Headstock stroke (Z1): 310mm - Main spindle speed: 7000 - Number of linear axes: 7 Number of fixed tool holder plate positions: 4 Number of driven tool holder plate tool slots: 3 High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 Sub-spindle: yes Sub-spindle speed: 7000 Power against spindle: 3.7Kw Bar clearance: 32mm Z stroke sub-spindle : 150mm Refrigerant Used: Neat Oil Bar magazine model and brand: Iemca Boss 432 Chip conveyor: belt conveyor Machine equipment: Set of fixed tool holders, motorized and tilting :::D DIMENSIONS AND WEIGHT::: Length: 2645mm Width: 1403mm Height: 1680mm  ...

Near new condition Serial number 38854 Manufacturing 12/2020 Pump hours: 2260 hours Cutting hours: 26 hours Number of cuts: < 13,000 cuts Cutting length 6200 mm Sheet thickness 6.35 mm Sheet thickness for stainless steel 4.0 mm Cutting angle 0.5 - 2.5°. Number of cuts 10-30 strokes/min Oil capacity 350 liters. Rear stop - adjustable 1,000 mm Motor power 18.5 kW Weight 23,000 kg. Dimensions L-W-H 7200 x 1950 x 1680 cm Equipment : - electric rear stop managed by CN - with LVD digital positioning display Bh283yzfico - electric sheet metal support with hold function - sheet metal clamping pad for fragile sheets - rear protection by light curtain - adjustable recoil of the stop before the start of the cut - automatic cutting angle adjustment - automatic adjustment of the clearance between blades - electrical limitation of the cutting length - 1 square arm 1 ...

Hello; We are selling our beautiful dispenser that fills all types of liquids (compote - alcohol etc.) quickly and efficiently. This dispenser can be used to fill all types of liquids and containers. The setting is very simple to operate. The machine is made of stainless steel and is very durable. NEAR MINT CONDITION The Professional kit includes : -Compressor (lowered machine kit): Ideal for not carrying your kegs. Angled outlet with anti-drip system. -Pneumatic pedal (for fast, efficient work). -Adjustable stainless steel tray. - Brand WEISSER -

Key data: 5000 mm, 4000 mm, 22000 mm

Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into operation, but stored directly. The machine is dismantled and stored dry in a hall near Hamburg. The machine can be viewed by appointment. The machine is loaded free of charge with an indoor cran ...

Key data: 45 °, 3200 mm, 1270 mm

Used sliding table saw Int. Art. Ref. m3495 Manufacturer: SCM Type SI 300n max. saw blade 315 mm Year of construction 2002 With scoring machine Carriage length 3.20 m Weight approx. 1,050 kg Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carrie ...

Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available

Depth support frame / depth angle frame / depth support for pallet racks 1.10m for safe storage of pallet boxes or pallets, approx. 384 pieces – used – : Price per piece ex site: only 29.-€ (net), dismantled, packed and loaded! Price for complete acceptance: 9.600.-€ (net)! Primarily complete sales! Manufacturer: C.A. Dick Type: Depth Support Frame Year of construction: 1978 Quantity: 384 pieces Depth: approx. 1.10m Width outside: approx. 87cm Width inside: approx. 84cm Distance between the trusses (i.e. where they are inserted): 1m Condition: good Available: between mid-September and end of October 2022 Location: Niedernberg near Aschaffenburg

Key data: 350 kN, 18 mm

Manufacturer: ENGEL, type Insert Insert 80H/35 Construction: Rotary table Clamping force: 35 t Year of manufacture: 2011 - neat condition, maintained, no oil leakage. Commissioning: 23.11.2011 Hours: 36,077 hours Injection unit: 18 mm Control: CC200

Karl Schnell process machine with lifting device and loading trolley. Automatic process: FV175-200 Type 046 Hoist: 200 Type 601 Nominal volume 200 l, total volume 250 l Dimensions: L x W x H (mm): 2900 x 1850 x 2400, Weight: 1705 kg Platform dimensions: L x W x H (mm) : 1600 x 650 x 1800, unscrewable Performance and capacity: pre-crushing, ultra-fine crushing, agitator, vacuum pump. Max. steam temperature: 120 °C. Max. operating temperature: 110 °C. Max. vapour pressure: 2 bar. CIP cleaning: 2 bar, 85 °C. Year of construction: 2020 Newly purchased for product development, only approx. 900 operating hours. Very neat condition, like new. CE Mark: Yes Condition: Like new, meticulously maintained and ready to use. Availability: On request

Smoking trolley with corrugated profile, only for skewers (1000'er) with smoke skewer Star profile (20pcs.) Stainless steel W.-No. 1.4301 Dimensions: 1021 x 985 x 1970 mm 6 floors, floor spacing: 270 mm H-shape, crossbar height: 390 mm Load capacity approx. 500 kg Condition: Used, but in very neat condition and ready for immediate use. Availability: On request

Manufacturer: Multivac Model: Thermoforming Packaging Machine R 145 Multivac Thermoforming Packaging Machine Model: R 145 Frame length: 4000 mm Nominal machine width: 320 mm Mains voltage: 400 V Machine voltage internal: 400 V Year of construction: 2010 Bought in 2020, very neat condition. Purchased for product development Performance and Capacity: Number of tracks: 2 Number of rows: 1 Drawing depth: up to 70 mm, adjustable in 5 mm increments Tool spacing: approx. 2475-3050 mm Electrically driven F145 hoists for moulds (4-point suspension) and for seals (2-point suspension), opening width of 150 mm each for top foil holder and bottom foil holder F 22, 3" core diameter Edge strip winder RSW 22 for max. strip width 60 mm per side

Travel Z - axis (tool length) max. 500 mm Travel X - axis (tool diameter) max. 330 mm Tool holder (basic holder) SK 50 With calibrated adapter for tool holder SK 40 with calibration edge With label printer, incl. replacement labels POS-CAM II camera system The camera system was renewed in 2020 The tool presetter is in a very neat condition, checked, cleaned, ready for immediate use. Manuals and instruction manuals are available The camera system can also be used to inspect the tool cutting edges (last picture).

Hardness tester, manufacturer Karl Frank Very neat condition The unit is cleaned, checked and repainted. This device includes various test plates for comparative measurements

Bottle packer from Kettner with various format parts from Weinbetrieb Conversion to Siemens S7 control system Machine can be seen near Heilbronn.

Fully automatic unpacking machine from the winery. The machine can be viewed near Heilbronn.

Fully automatic carton unfolding machine from wine factory. The machine can be viewed near Heilbronn.

Key data: 46 °, 3000 mm, 1000 mm

Swivel sliding table saw WA80TE from Altendorf with 2-axis scoring machine and in good condition Sliding table length 3000mm Saw blade swivel from 0 to 46 degrees Drive motor 5.5kW with automatic motor brake Saw blade diameter up to 400mm Cutting height max. 125mm Cutting width up to 1000mm Swivel angle and height adjustment electrically via buttons Cut-to-length stop ruler up to approx. 3200mm Width stop can be folded down Suction nozzle 80 + 120mm Sliding carriage lockable in any position 1 set of plastic saw blades with matching scoring tool 3 splitting wedges 2-axis scoring unit 2 protective covers 2 emergency stop switches Operating instructions CE Mark Neat machine with usual signs of wear. Minor scratches in the sliding carriage, as well as two repaired small incisions. Original paintwork, only a few spots dabbed V-belt and protective cover renewed. Di ...

1 piece used POWER Generator ABZ - Aggregate-Bau GmbH Type: IA- 250/50 Year of construction: 1993 Perfomance: 250 KVA Voltage: 400/231 Frequency: 50 Hz fully functional immediate available location of the machine: near Erfurt/Germany Subject to prior sale, subject to errors and/or misrepresentations, without guarantee and/or warranty, sold in ACTUAL condition - lying and/or standing

Sliding head lathe Star SR 38 Type A :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 31i model B Main spindle power: 11Kw Main spindle bar clearance: 38mm Headstock stroke (Z1): 320mm Main spindle speed: 7000 Number of linear axes: 7 Number of fixed tool holder plate positions: 14 Number of driven tool holder plate tool slots: 7 Rapid feeds for linear axes X Y Z: 36m/min High refrigerant pressure: yes External tank system with filter: yes Sub-spindle: yes Sub-spindle speed: 7000 Power against spindle: 5.5Kw Bar clearance: 38mm Number of motorized rear tools: 8 Coolant Used: Neat Oil Model and brand of bar loader: Iemca Boss 552-HD for 4 meter bars Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2740mm Width: 1315mm Height: 2120mm Weight: 4300Kg

COEMTER BAG MAKER for BAGS-ON-ROLL TER CORE, type 92-90 38-25, constructed in 2001, n.2 nearly equal machines available, For LDPE LLDPE HDPE, Max bag width 900 mm., The machine is offered checked for good conditions, Constructors description:, AUTOMATION OF THE MANUFACTURING PROCESS, Bag making machines in continuous for bags in roll with core, with two tracks, making point-of-sale bags, freezer bags, refuse collection bags, etc., Robust and high-tech construction with continuous movement design to guarantee maximum reliability and minimum and easy maintenance., The sealing drum makes possible to work at low temperatures thanks to the long sealing time, and offers excellent adaptability to different types of materials, with maximum sealing guarantee., Mixed sealing optional., Use of independent band aligners before rewinding for perfect roll making., Placement of core container at floor  ...

We offer Lead & Pull Screw Lathe / Lathe with Three-Jaw Chuck Bed >100cm W approx. 3500cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. The display will be updated even further specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also ...

Used Complete Bottling Line R Deckert 2012 The Used Complete Bottling Line footprint on the CAD is very large but the area covered by the 3 machines is relatively small and neat Filling Monoblock Rinser Filler Capper R Deckert F AVM 738 The machine due to the pucks has great flexibility on what bottles can be filled with very low changeover times The Company Chivas were running 50cl to 1 5l down the line and bottle shapes from Revolve to their standard Chivas 25 bottle The corker capper was running T cork and EST The speed is the slowest on the machines at up to 30 bpm Capsule spinner Kematec MBK 3 AR 3 head spinner with speed up to 45 bpm Scotserve has said although badged as Kematec the machine is built by Norton Krones equipment Labeller Solomodul II 1 200 15 Modular labeller with 3 station points on the machine and speeds up to 150 bpm There is also a 4th station as a spare or to all ...

Press brake Model from the highest Trumpf series, Pressure 130 tons / length 3m, 8 CNC axes, the highest quality and accuracy / Hydraulic mounting of upper and lower tools, CNC bombierung - compensation of CNC table deflection, Bend Guard - modern safety laser. 3D bumpers. The machine is very neat. Little mileage. Regularly serviced. New safety lasers, very fast machine operation.

4 up Ctp System Screen 4600 S year 2017 near 70 plates Loader Stacker

Used Eurostar Canning Line up to 3000 cph Technical Analysis The Used Eurostar Canning Line up to 3000 cph is an industrial grade bottling machinery that offers advanced performance and functionality for companies in the beverage industry Production Speed of the Used Eurostar canning line up to 3000 cph The Used Eurostar Canning Line is capable of operating at an impressive speed of 3000 bottles per hour BPH This high speed makes it ideal for large scale bottling operations Type of Containers Supported This machine is designed exclusively for can bottling making it highly specialized for this application Can Formats supported by the Used Eurostar canning line up to 3000 cph Versatility is a strong point of this bottling line as it can handle a wide range of can sizes including 0 20 L 0 25 L 0 33 L and 0 44 L cans plus 0 15 L slim sizes can also be added if necessary This flexibility allo ...

Used Neat Pneumatic Paint Pumps 1" Dispensing quantity min 5 pieces

1 piece used Double chamber cement silo Volume approx. 60 tons (30/30) in good condition completely as shown including base frame Location: near Brandenburg Price on request without guarantee and/or warranty; Sale takes place ex location in the current condition, as it is and/or stands; Errors and/or misrepresentations excepted, subject to prior sale

Description The automatic tax strip labelling machine mod. S75/4 applies the tax strips of various sizes on containers of every kind. The tax strip is applied in the U or L” shape. The machine is equipped with a speed variator, a device for immediate stop in case of block and an automatic device for the height regulation of the container which goes from 160 mm up to 380 mm. We have two identical machines. They have been in use less than 100 hours each and are nearly brand new. Original purchase price 40 000 €/machine.

Key data: 5 , 230 mm, 120 mm

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor

Key data: 800 mm, 800 mm, 550 mm

CNC Vertical 5-Axis Machining Center with 6-Fold Pallet Station Hermle C 42 U Year of construction 2014 Heidenhain iTNC 530 CNC 2-Axis NC Swivel Rotary Table: Table rotation axis C-axis 360° Tabletop swivel axis A-axis +130°/-130° Number of pallets in the system: 6 Pallet clamping surface 400 x 400 mm Pallet load max. 450 kg Longitudinal travel: X 800 mm Transverse travel: Y 800 mm Vertical travel Z 550 mm Rapid traverses up to: X/Y/Z 45,000 mm/min. C 65 rpm. A 25 rpm. Spindle drive power: 10/20 kW AC Spindle speeds: 20 - 18,000 rpm. Spindle torque max. 180 Nm Tool magazine positions: max. 85 (42 ATC + 43 additional magazine) Tool holder: HSK-A63 Tool Ø with/without adjacent tools: max. 90/125 mm Tool length: max.300 mm Tool weight: max. 8 kg Chip-to-chip time: 4.5 sec Accessories: 5-axis machining with 2-axis NC swivel rotary table. Pallet ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70500 € : 1417.05 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66T - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 68200 € : 1370.82 € : 40 to : 1250 mm : Y1 / Y2 / X und R Achse : 200 mm : 1050 mm : 250 mm : 440 mm : servomotorischer Spindela : 115 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 1950 mm : 1450 mm : 2650 mm : 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66T - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 107600 € : 2141.24 € : 135 to : 3050 mm : 4 : 320 mm : 3340 mm : 500 mm : servomotorischer Riemenan : 100 mm/s : 10 mm/s : 100 mm/s : 650 mm : 250 mm : 4200 mm : 2200 mm : 2550 mm : 7300 kg servomotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66T - 2D touchscreen display 17 - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard ...