We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,993 used machines on RESALE, but how to find them? Machine Search
used
Spare part for HEIDELBERG OHT | Original Heidelberg Crucible Protection for V-belt drive Sparepart for HEIDELBERG OHT | Original Heidelberg platen Protective cover for V-belt drive Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The spare part is sold as it goes and stands. We sell the spare part "as is", no warrenty, no guaranty. We don't take the goods back. Price from location: 15370 Fredersdorf near Berlin - transport costs on request. Price is LOT. Shipping is not included.
used
Reference E0023 Spare part for Hohner Exact stapler Staple head Hohner 55/7 FR Condition is good - not new Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The spare part is sold as it goes and stands. We sell the spar part "as is", no warrenty, no guaranty. We don't take the goods back. Price from location: 15370 Fredersdorf near Berlin - transport costs on request. Price is LOT. Shipping is not included.
used
Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 8, gearing 1/8”CP Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder see list Lateral register: ± 5 mm Longitudinal adjustment unlimited at all printing and die cutting stations, selectable from mobile control console, smallest adjustment 0,05 mm. Automatic register control: Sensotec automatic register control, web to web comparison for print stations and web to cylinder for die cutting stations. Front to Back Register control system Web inspection Tecscan web inspection system Drying optimized hot air drying Web turner rail mounted moveable platform with E&L web guide. Webguide Fife web guide before rot ...
used
Heidolph Polymax 1040 with incubator 1000 and high incubation hood. Offered here is the platform shaker with tumbling movement with temperature-controllable, high incubation hood. It is a package of the following devices: - Polymax 1040 - tumbling platform shaker with 2 - 50rpm, continuous operation and timer function (max 120min) - Incubator 1000 - nominal temp display, actual temp display, adjustable temperature up to 65°C - Incubator hood, high The Polymax has a single-sided, dismountable and completely removable attachment, consisting of two vertical, screwed anchor pins and a height-adjustable, padded grab bar. The incubator hood is damaged at the left, front corner. An edged aluminum plate was glued over the damaged area and screwed into the floor. This repair is professional and not a backyard screw. I am happy to send detailed photos. The device can be vi ...
used
Capacity: in 180 x 130 mm., out 170 x 120 mm Feed speed: 6 to 28 m/min, 2,2 kW motor Cardan shaft drive Pneumatic pressures Spindles: 8 Bottom 5,5 kW, fence 5,5 kW, near 5,5 kW, fence 5,5 kW, top 11 kW, top 7,5 kW, bottom 5,5 kW, universal 5,5 kW Spindles 40 mm diameter Spindle speed: 6000 rpm Mechanical digital read-out Infeed table length: 2 m. Max. cut on 1st spindle: 10 mm. Min tool diameter: 100 mm, max tool diameter: 180 mm on first and universal spindle, 195 mm on vertical spindles, 200 mm on top spindles and 2nd bottom spindle Safety hood
used
turning diameter over bed: 5000 mm turning diameter over slide rest: 4000 mm turning length: 22000 mm total power requirement: 36 kW weight of the machine ca.: 53,5 t dimensions of the machine ca.: m Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
TECHNICAL SPECIFICATIONS (Cone Mixer) Manufacturer: KNIELE Name: Cone Mixer Type: KKM 2000 / 3000 Version: with bevel gear Year of construction: 2008 Output quantity: 2.0 cbm Capacity: 3,000 l Three-phase motor agitator inside: 45 kW Three-phase motor agitator outside: 37 kW Mixer lining: Ceramic Mixing system for ready-mixed concrete consisting of: - KNIELE Cone Mixer KKM 2000 / 3000 - Elevator system with bucket - Feeder scale - Cement scale - Water dosing system - 1 x 100 t cement silo (double chamber) - 1 x 80 t cement silo (double chamber) - 1 x 60 t cement silo (double chamber) SPECIFIC COMMENT - Aggregate storage for the most part no longer usable - Machines will be dismantled in the near future and ready for loading If you are interested, we can send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis
used
Key data: 11 , 8 , 1
Compressed air station Kaeser SK19 screw compressor Proven quality Made in Germany Very good condition At a special price directly from the construction site. The machine ran in a recently decommissioned plant near Düsseldorf.
used
Aspirator or grain pre-cleaner RUBERG RVS 150 Good condition! With leak aspiration Reserve shed available At a special price directly from the construction site. The machine is located in a recently decommissioned plant near Düsseldorf.
used
x-travel: 600 mm y-travel: 855 mm z-travel: 750 mm table surface area: 400 x 400 mm clearance diameter: 720 mm pivoting angle: -185 / +45 Grad workpiece weight: 340 kg table rotation speed: 50 U/min tool taper: HSK-A 63 spindle turning speed - stepless: 12000 U/min spindle motor: 40 kW tool diameter: 70 mm tool length - max.: 365 mm weight of tools max.: 8 kg rapid travel range: 70/45/90 m/min control: Heidenhain iTMC 530 total power requirement: 54 kVA weight of the machine ca.: 15 t dimensions of the machine ca.: 6,1 x 2,47 x 3,17 m The 5-axis universal machining center G350 offers nearly unlimited possibilities in the milling of workpieces of various materials. materials. equipped with: - CNC control Heidenhain iTNC 530 - 2-fold Pallet Changer - NC swivel rotary table (A-/B-axis) - tool changer 40 places (HSK A63) - IKZ / coolant system 3-22,5bar - chip conveyor The data for this ad ...
used
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...
used
We have 8 pieces of L32 cylinder heads in our stock in Istanbul Nearly brand new condition with very low working hours crack tested and water pressure tested free of cracks or welding We also have pistons , liners , con rods, fuel pumps and more ... please contact us at: info@fin-marine for more information
used
x-travel: 600 mm y-travel: 855 mm z-travel: 750 mm table surface area: 570 mm clearance diameter: 720 mm workpiece weight: 400 kg pivoting angle: -185 / +45 Grad table rotation speed: 50 U/min tool taper: HSK-A 63 spindle turning speed - stepless: 12000 U/min spindle motor: 40 kW tool diameter: 70 mm tool length - max.: 365 mm weight of tools max.: 8 kg rapid travel range: 70/45/90 m/min control: Heidenhain iTMC 530 total power requirement: 47 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 6,1 x 2,47 x 3,17 m The 5-axis universal machining center G350 offers nearly unlimited possibilities in the milling of workpieces of various materials. materials. equipped with: - CNC control Heidenhain iTNC 530 - NC swivel rotary table (A-/B-axis) - tool changer 40 places (HSK A63) - IKZ / coolant system 3-22,5bar - chip conveyor 2 identic machines available The data for this ad ...
used
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...
used
The shuttles were used until October 2021. Maintenance by the in-house technicians and Knapp is carried out regularly. The shuttles are neatly stored and can be called up at any time. There were originally over 70 shuttles in use. Just ask how many are still available. Containers of the sizes 60x40 cm and 40x30cm were used. It could be stored up to four times deep.
used
RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut ...
used
Universal cylindrical grinding machine Incl. internal grinding deviceTip height: 160 mm. Grinding length: approx. 500 mm. Headstock holder: MK 4 Coolant system, various grinding wheels and documentation. Unfortunately without a tailstock. Dimensions, LxDxH: approx. 1800 x 1200 x 1700 mm. Weight: approx. 2000 Kg. Neat ready for use condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.
used
CANON OCÉ ARIZONA 460XT large format printer built in Canada in 2013, is designed to provide the user with near photographic quality of prints with excellent text clarity. To make this possible, the CANON inkjet printer uses a piezoelectric method, during which special crystals change their shape and volume under tension and pressure on a membrane, and then splash under high pressure onto the printed surface. The use of this technology results in excellent image sharpness, density and uniformity, both while printing on a roll media and on a flat substrate. The OCÉ ARIZONA 460XT UV flatbed printer has an extra large work table with a vacuum system, with which oversized media with a maximum size (L x W) of 3060 x 2510 mm are held stationary to ensure accurate registration of multiple prints. Printing of large-format media uses a piezo head configured for CMYK + WHITE colour support, w ...
used
We offer an extraction system from NESTRO Lufttechnik GmbH. The machine is from 1996, but is currently no longer used. Due to the age-appropriate condition, we recommend a prior inspection of the facility. The system is offered - due to a new purchase from our customer. Particulars: - Manufacturer: NESTRO Lufttechnik GmbH, Hainkirchen - Model: SFN 24C - Year of construction: 1996 - Machine No.:343676/002-98 - Filter area: 240m3 The machine is still in our customer's factory near Leipzig. The sale takes place ex works EXW (loading possibility available). We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarant ...
used
COLOR SORTER BY IST ITALY, new in 2017, little use Was used for cereals, legumes, seeds sorting line Replaced by a more sophistcated new one but was in perfect working condition when replaced. Stored in a dry conditions currently. 3+ chutes, 3 for sorting, one for recycling, 256 ejectors or 64 ejectors by chute, 4098 pixels, led lights OUTPUT : till 12 tonnes according to the manufacturer original technical liftlet. Information on request, shipping to any destination Can be seen near Amiens 80, northern France See also website : milin cereal equipment Brittany, France
used
Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.
used
White PF90/180-REG portioning machine used Hourly output approx.: 2000 servings Ejector diameter: 90mm (Other drums on request) Thickness adjustment via drum possible Operation via foot pedal, if you go down from it, the machine stops Poti for speed regulation is fixed, should be made viable, or replaced Machine with corresponding signs of use and wear but in good condition neat and quiet running Machine must be thoroughly cleaned before use New list price 2019 in this equipment: 16850,- EUR net Video about test run and other pictures available
used
Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm
used
The machine for closing bottles in modified atmosphere and under vacuum has been designed and built according to the most modern and advanced technologies. All the solutions adopted are the result of research and design aimed at the construction of safe, reliable machines capable of guaranteeing high quality and production standards. The machine was built with high quality components to ensure low maintenance and a long operating life. The pipes, fittings, valves, materials, installed instrumentation comply with the F.D.A. All the machine parts, the smooth surfaces, the rounded corners have been specially designed for facilitate cleaning and sanitization. Length mm 4550 Width mm 2310 Net weight Kg 5000 Frequency Hz 50 Voltage Volt 380 Production 9000 Bottles / h (100 ml) Size Used bottles 50 / 100 ml Material bottles used: glass Steam consumption 300 Kg / hour Water ...
new
Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are to be understood as gross prices in EURO ex works. The offers are s ...
used
Stephan UM44-S Universal Machine three speeds (700/1450/2900rpm) Pulse switch with mixed insert -tiltable for removal of the processed medium -neat condition, should still be thoroughly cleaned before use Video about test run and more pictures available
used
Capacity: 180 x 100 mm. Spindles: 4 Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kW Motorised thickness adjustment 4 cutterblocks Chaindrive Infeed table 1m70. long
used
Pallet rack, Galler, approx. 10m, or approx. 5.50m high, 1.100kg / pallet, max. 3.747 or 4.647 spaces - used - : Price for complete acceptance from site: 60.000.-€ (net), dismantled, packed and loaded! Price for partial quantities on request! For a surcharge of 11.000.-€ (net) another 80 frames with a height of approx. 12m are for sale! Manufacturer: Galler Type: 41 S Year of construction: 2008 Shelf load: 3,300kg Max. pallet weight: 1,100kg Max. usable field load: 23,100kg on floor plus 7 levels = 1.40m shelf spacing, 16,500kg at 2.25m spacing, 13,000kg at 2.25m spacing, Frame Type: 21 S Bumped / raised frame in height approx. at 5.50m. This means that you can also unscrew the frames there and then have twice as many 5.50m high frames. approx. 10m = 300 pieces Frame depth: 1.05m Frame bracing: welded Trusses Type: IPG 150 C (11.5 x 6.7cm) ...
used
Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood 4 cutterblocks
used
Manufacturer : Th?mis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A BOFA vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control compute ...
used
Extraction and filter system Nestro 9/4/20 with chip container YOC ca. 2005 Filter area 156 m² Hoses 2 m long, 108 pieces, diameter 220 mm Total air volume approx. 20,000 m³/h Suction fans 1. Fan 16 kW 350 mm approx. 9,000 m3/h 2. Fan 11 kW 350 mm approx. 6,000 m3/h 3. Fan 7.5 kW 250 mm approx. 4,000 m3/h Return air duct with summer/winter flaps Cleaning electromechanically 3 motors each 0.66 kW Rotary valve 0.37 kW 3860 mm Transport fan to container 4 kW Control of the system with electrical plans External dimensions approx. L x W x H 4000 x 24200 x 5000 mm Weight 6,000 kg Container for chips L x W x H 4500 x 1900 x 2100 mm Weight approx. 2,000 kg The extraction system is still in operation and will be replaced by a larger system in January 2024 The facility is fully operational and will be available at the end of January 2024 The system can be disassembled i ...
used
Carrier 30RB0402–0379-PEE chiller – with a cooling capacity of 400 kW | ChillerTech - Used chillers available from stock! Comprehensive services in the selection of cooling technology, allowing us to maintain the highest standards and optimize the system for the individual needs of our customers. Innovative and easy-to-use cooling systems based on chilled water, enabling our customers to save nearly 45% per year. At the same time, the constantly expanding assortment of nearly 68 chillers available immediately allows us to make a professional selection in terms of cooling capacity, dimensions or type of components used in the device. Access to fully new as well as used chillers in the capacity range from 1 kW to 1.2 MW. High-performance, compact and, most importantly, completely safe devices in the field of cooling as well as stabilization of various technological processes. Tak ...
used
Stephan UM44 Universal Machine two speeds 1440/2890rpm Kill switch with knife insert -tiltable for removal of the processed medium -Engine brake adjustable in power and time -neat condition, should still be thoroughly cleaned before use Video about test run available
new
New cooling water distributor 25 duct with very high-quality components - ready for connection The manifold was made for a large vacuum system, which was then not accepted. It was made in 09/2018 and then fully shrink-wrapped and packed in a box. Today the distributor was unpacked for photos. - 25 cooling circuits - 3 x ifm SM8000 magnetic-inductive flow meter - 22 x ifm SM6000 magnetic-inductive flow meter - 4 x ifm AL1222 IO-Link master with EtherNet/IP interface - A VA ball valve from ECON at the supply and return, 50 pieces in total (different sizes) - a Swagelok proportional RL3 overflow valve on each channel (various dimensions) - Pressure and temperature measurement in flow and return - Swagelok fittings The distributor is about 3m wide. It can be viewed by appointment in Dreye near Bremen
used
Stephan UM44-S Universal Machine two speeds 1410/2820rpm Impulse switch with knife insert UM44-S was made UM44 by removing the lateral drive from the previous owner, the openings were closed with stainless steel sheets -tiltable for removal of the processed medium -neat condition, should still be thoroughly cleaned before use Video about test run and further pictures available
used
Delivery ready Located near Brescia northern Italy Regione: Lombardia
used
We offer Lathe VDF with three-jaw chuck bed >100cm W:approx. 350cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). Please only bid if you accept the terms and conditions of sale We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also ...
used
For sale is a cellophane machine from the renowned company IMA BFB 3711V. The machine is in continuous production. The nearest possible sale date is September 2024.
used
Citrus juicer adapted to different sizes of fruit, very good condition, hardly used, clean, neat, ready to work. Very efficient, solid, trouble-free.
used
Hommel Rotormat R1000 Restbrotzerkleinerer used Machine runs neatly and quietly 3kW motor, powerful torque with engine brake, standstill immediately after switching off Bakery condition, therefore thoroughly clean before use! Video about test run available
used
Wrap-around labeller for: Bottles Cans Jars Flacons Manufacturer: Newman, Model NV2 Inline used, good condition, from ongoing production. Suitable for cylindrical and slightly conical products. Easy format changeover. up to 80 products / min Dimensions: approx. 4500 x 1100 x 1600 mm Stainless steel DataSensor Weight approx. 500 kg Location: Near Stuttgart
used
Key data: 250 mm, 285 mm, 5 1/min
Precision CNC Lathe Spinner SB - CNC with Siemens 840D Control PLC missing, parameters & circuit diagrams available The Spinner SB - CNC was built in 1996 and is equipped with a reliable Siemens 840D control system. This precise lathe is ideal for a wide range of applications and is characterized by its high performance. Specifications: - Manufacturer: Spinner - Type: SB - CNC - Year of construction: 1996 - Control: Siemens 840D - Travels: X 250 mm, Z 285 mm Spindle: - Max. speed: 5,000 rpm - Spindle passage: 42 mm Revolver: - Number of stations: 12 - Tool holder: VDI16 Dimensions and weight: - Dimensions: 2.1 m x 0.8 m x 1.6 m - Weight: 1,500 kg The Spinner SB - CNC is in a used, but very neat condition. All functions have been carefully checked, and the machine is fully functional. The SB-CNC spinner is ideal for precise machining in a variety of appl ...
used
SCM SI16 SW sliding table saw Brand: SCM Type: SI16 WA Table height: 880mm Trimming table: 3,200 mm Main saw: 4 kW (7.5HP) Saw blade shaft: ø 30 mm. with two carrier pins Preritser 0,75 kW (ø120) Saw blade max ø200 - ø400 mm Cutting height max 120 mm Saw blade swivel: 0 - 45° Cutting width: 1,250 mm Turntable 3200-4000-6000 Weight: 630 kG Condition: Fully functional, neat and well maintained
used
Sell a press on behalf of the factory, which was fully functional until the plant was shut down. Pressing force 250 tons Length 3050mm Sheet thickness max 15mm A lot of accessories Dimensions transport approx. 3,2m 2m 3,5m high 20to Removal must be organized by the buyer. Crane rental nearby, it can be helped supportively.
used
Ref. 440 Paper drilling machine "Foellmer" Model: IR 12/2 Ma. Nr.: 851 / Year of construction 1992 2 adjustable drill heads Accessories: Technical documentation, cutting strips, drills, Wax paper strips Very neat condition. Tested / Test possible
used
Capacity: 230 x 130 mm. Spindles: 8 Bottom 7.5 kW, fence 7.5 kW, near 7.5 kW, 2nd fence 7.5 kW, 2nd near 7.5 kW, top 11 kW, bottom 7.5 kW universal 11 kW Grooved bed Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces Automatic bed lubrication Spindle diameter: 40 mm. Spindle speed 8000 r/min 5 driven feedrollers in table Feed: 6 - 36 m/min, motor 5,5 kW Automatic hopperfeed Tooling not included
used
Furnace / annealing furnace Degussa Wolfgang near Hanau Oven no.: 20881 Type: KO 80/50/120 Year of construction 1967 1000 °Cels Volt 380 Hz 50 AMP 82 kW 54
used
Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available
used
Edge and profile grinding machine Lassm LS-1N Compactly built machine Applicable for the processing of edges and profiles / solid wood, veneered and lacquered parts Working height max. 130 mm Workpiece length min. 50 mm Infinitely variable feed with conveyor belt and pressure rollers 5 - 30 m/min. Feed motor 1.5 kW Abrasive belt drive motor 1-1.5 kW Sanding belt speed 7-14 m/sec Sanding belt dimensions 80 x 2450 mm Oscillation of the abrasive belt 0-20 mm Machine from carpentry dissolution / retirement Machine in very neat condition From location NET € 5,900.00
used
Condition: neat Availability: immediately