We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,106 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
The injection molding machine is fully operational, it is constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 35,000 h.
used
The list of equipment for sale from molding line: 1. Moulding Machine HSP-2D (22kW, 70f / h) 2. Lifting table 3. Pressure plate 4. The dispensing sand tank
used
NEGRI-BOSSI NBV 160/375 N72-690 machine The machine, connected, is working. In good condition Year of production: 2003 For sale immediately. Possibility to view and start the machine. The last service inspection of the machine: 07/2020
used
Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm
used
2 injection molding machines BATTENFELD HM 65/210 The injection molding machines are fully operational, they are constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 52,000. The price is for one injection molding machine.
used
Year of manufacture: 2011 Screw diameter: 100 mm Weight: 4006 cm3 PS injection weight: 3645 g Closing force: 1300 t
used
Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
thermoset BMC, included in the sale 2 pcs Tool-Temp tempering device - water, 1 pc Wittmann W711-0507 robot, Duroplat D45 unit (dry sets), 2 pcs Regloplas tempering device,
used
Year of manufacture: 2015 Screw diameter: 55 mm Chamber volume: 665 cm3 Shot weight: 604 g
used
Year of manufacture: 2004 closing force: 500 t Columnless machine inspection possible video available top condition
used
DEMAG ET 650/5200 - non-functional broken column Robot - broken year of manufacture: 1997 v. no. 8631032 auger: 95 mm weight: 2835 cm3 closing force: 650 t clamping plates: 1450/1350 between columns: 1000/900
used
thermosetting injection molding machine - BMC, included in the sale are 2 pcs Tool-Temp TT-162-E temperature device, LRX 250 manipulator, conveyor, vacuum pump Busch R5 RA 0025 F 503, possibility of conversion to thermoplastic
used
Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm
used
LGH-450M injection molding machine made in Korea. Year of construction 2012 Number of hours worked: 35,000 Clamping force 450 tons. Screw diameter 70 mm. The technical and visual condition is very good. Double-plate closing system
used
Demag Ergotech 110/470-430 machine The machine, connected, is working. In good condition Year of production: 1999 For sale immediately. Possibility to view and start the machine. Last machine inspection: 09/2022
used
screw diameter 35mm a complete GO was done on the machine last year, so the machine is fully functional; the machine was purchased as new with a price of EUR 111,481!
used
Clamping force: 5500 kN Mold plate dimensions: 920 x 830 mm Screw diameter 80 mm The machine is in very good condition, with full equipment (the entire production cell), ready for production.
used
OIMA STRATOS 400 KP plastic injection machine Year 2008
used
Woojin Plaimm 550 Ton injection molding machine year of production 2012 clamping force 550 tons screw diameter 90 mm. double-plate closing system. Technical and visual condition is very good. The machine is used very little.
used
Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing the screw up to a diameter of 35 mm.) Number of hours worked: 20,068 h
used
VERTICAL INJECTION MACHINE FROM MANUFACTURER JSW top condition inspection possible video available
used
Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition
used
Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line
used
We offer a Negri Bossi CANBIO V90 injection molding machine for sale.
used
Engel ES2000H750L Injection Moulding Machine 90 Kw Working hour: 149658
used
Battenfeld TM 550/4500 Injection Moulding Machine 550 Ton 55 Kw Working hour: 48500
used
Fully functional machine in good condition. Screw diameter 45,0 mm Tie bar spacing (H) 500,0 mm Tie bar spacing (V) 500,0 mm Shot weight 291,0 g Pressure on material 1910,0 bar
used
Capacity 700 tones Distance between columns 8080cantimeter
used
BMB KW28 PI/1300 Injection Moulding Machine 280 Ton Working hour : 28323
used
BMB 38 PI/2200 Injection Moulding Machine Working hour : 58806 (May 2023)
used
Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.
used
BMB KW38 PI/2200 Plastic Injection Moulding Machine Machine is in working condition
used
Arburg Allrounder 420C 800 250 Injection molding machine Arburg Allrounder 420C 800 250 injection molding machine Year 2004
used
Haitian 700 Ton Plastic injection moulding machine Machine is in good condition
used
Battenfeld TM Xpress 270/1350 injection molding machine is on sale 2011 Battenfeld TM Xpress 270/1350 Injection molding machine
used
NegriBossi injection molding machine for sale 2008 NegriBossi v320 Injection molding machine
used
Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Injection moulding machine Krauss Maffei KM200-1400C1 Clamping force 200 Ton Distance between columns : 550 cm x 550 cm
used
Italtech MSK 2250/13000 capacity 2200 Ton Machine is in working condition
used
Distance between column : 460 mm x 460 mm Minimum mold clamping 220 mm max 550mm. 125 Ton Machine is in good condition
used
warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available
used
Manufacturer Krauss Maffei Model KM 350-1650 B1 Year 1995 Located in Turkey Machine can be seen in working condition 350 Ton
used
Number of working hours : ONLY 596 25 Ton Machine is like new
used
KonturfräÃ?maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.
new
Flat 4-sided blade (package, 10 pcs.) 12x12x1,5 Flat 2-sided blade (package, 10 pcs.) 20x12x1,5 Flat 2-sided blade (package, 10 pcs.) 30x12x1,5 Flat 2-sided blade (package, 8 pcs.) (used) 50x12x1,5
used
Injection moulding machine Krauss Maffei KM200-750CX Machine is in good condition Clamping force 200 Ton
used
Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine
used
POTVEL 35 vertical electric press Distance between columns: 35x27 Maximum pressure 210 Kg / cm2
used
Robot + magnetic plate Screw diameter : 120 mm Distance between bars : 1420 mm x 1270 mm Platen size : 2065 mm x 2060 mm Mold height : Max : 1400 - Min 500 Machine is in excellent condition
used
BMB KW 25PI / 1300 injection moulding machine Machine is in good condition All maintenance has been done regularly Robot and tower do not include in the offer