mould husky used for sale

Description Integrated robot: X: 1000 mm Y: 1400 mm Z: 2360 mm ROTATION 90 ° 1 BLOW (forceps) 2 EMPTY switchable

Key data: 150

two-component machine year of manufacture 1995, closing force 150 T, control MC 3, plasticizing unit 1 - screw diameter 40mm, molded weight 183g, plasticizing unit 2-screw diameter 30mm, molding weight 85g

Description Increased injection group

Description Working hours: 61062

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

Description ROTARY TABLE: DIAM. 700 mm

Description Mold heating 32 zones MACHINE SOLD IN THE STATE IN WHICH IT IS Missing monitor and floppy drive Missing tabs: - 2 AR281 cards - 3 TT081 boards - 1 PS244 / A card - AS141 connector (for closing transducer)

Description working hours: 26210 h Rotary table hot rooms 8 zones Magnetics plates Tecnomagnete

Description Working hours: 26782 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 27139 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 36359 Machine complete with second and third injection, thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 32848 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description bi-injection machine vertical injection with 20mm diameter screw hoist capacity 200kg height from the ground 3800mm

Description Verticalizable

Description 6 zone mold heating

Description Working hours: 71.000

Description bi-injection machine vertical injection with 20mm diameter screw hoist capacity 200kg height from the ground 3800mm

Description 6 zone mold heating

Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net

SECOND-HAND HYDRAULIC BENDING PRESS MM. 2400X1300 - Platens mm. 2400X1300 - Opening mm. 1200 - N. 2 cylinders - Top bottom movement

Injector Brand: Sandretto, Model: 1300/230. 230 TN. Year: 2002

Description N.40 HOT ROOM AREAS INSTALLED LANGUAGE GERMAN AVAILABLE LANGUAGE ITALIAN

Universal machine for elongating wheat doughs, mixed wheat and rye doughs (30% and 70% rye), rye doughs without a rolling table. Technical data: Weight range: 200-2000 gr Machine capacity: up to 2500 pcs/hour at 1000 gr Rounding length: 560 mm Dimensions (L x W x H): 5520x1100x1500 mm Weight, net: 880 kg Connection value: 1.5 KW Advantages: Gentle elongation due to the correct choice of the length of the elongation path, 3-stage dough processing: rolling, rolling, shaping, Low dough fatigue, Modern design, Quick and easy maintenance of the machine, stainless steel housing, Feeding hopper with adjustable opening.

spindle tilting: yes-5 bis +45°; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: manual; read out height: digital; read out tilting: digital; read out fence: scala; spindle diameter: 30 mm; speeds: 1500, 3000, 4500, 6000, 9000, 12000 U / min; motor power: 5 / 6 kW; motor brake: yes, automatically; suction connection: 2 x 120 mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 950 kg;

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] thirty Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20

Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 230 Injection pressure [bar] 2022 Dimensions and weight Net weight with control cabinet [t] 6.8 Dimensions (length x width x height) [m] 4.82 x 1.48 x 2.01 Closing unit Clamping force [kN] 1200 Dimensions of mounting plates (hxv) [mm] 740x680

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manual; altitude display: digital; swivel angel display: digital; tilting fence display: Scala; spindle diameter: 30 mm; speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000; power consuption: 7,5 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 2400mm; maschine width: 1400mm; weight: 1100kg;

Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 750x750 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 412 Injection weight [g] 392 Injection pressure [bar] 1909 Dimensions and weight Net weight with control cabinet [t] 8.8 Dimensions (length x width x height) [m] 5,800 x 1,700 x 2,400

We have an injection molding system for sale • Netstal Synergy 3500-2700Ε year 2007 machine • incl. Closing Mold 72Cavity 29/25 cap 1.32gr.with /3,5sec. cycle /year 2016 Plastisud • Hot runner year 2016 Plastisud • Controller Custom made • Belts • Packaging unit 5-1-5 The machine is in production in Greece until the end of March 2024 and will be available for sale in May 2024.

Closing unit Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 X 1530 Clearance between columns (hxv) [mm] 1120 X 1000 Min./max. mold height [mm] min 600 Maximum opening width [mm] 2000 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2863 Injection weight [g] 2605 Injection pressure [bar] 1742

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

Closing unit Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1000x950 Clearance between columns (hxv) [mm] 735x685 Min./max. mold height [mm] 250 - 600 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 383 Injection pressure [bar] 2304 Electrical and hydraulic equipment Rated power of the pump motor [kW] 36.1 Heater power [kW] 29.2

Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907x910 Clearance between columns (hxv) [mm] 630x630 Min./max. mold height [mm] 460-800 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 424 Injection pressure [bar] 1890 Electrical and hydraulic equipment Heater power [kW] 30.3 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (length x width x height) [m] 6.95 x 2.08 x 2.48

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Brand: Martin Type: T25 M-No.: V 245411 Year of construction: 1997 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: eye level with digital display, stop position with digital display Spindle height 150 mm electromotive heights adjustment with digital readout Inclined position: -5° - +45° electromotive angle adjustment with digital readout Feed: 4 roll feed device Optional: Stop: Aigner Integral stop Milling protection cover: Aigner Centrex