We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,320 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Single-station machine for containers up to 5 ltr. Extruder 60/24D. ERinfachkopf W. Müller type S1/90. Nozzle up to 90 mm. Prpoprtional control for wagons / shape / calibration. Item removal. Mould dimensions: L 400/450 mm, W 350 mm, D 2 x 130 mm. Mould opening variable. PLC control
used
This YANCED YS600 Blow Moulding Machine was manufactured in the year 2015 in Spain. The machine has a clamping force of 180 kN.
used
Injection molding machine Brand Negri&Bossi Nb 40 400 h - 115 year 1996 pres.idr.max 150 power kw 11 -- hz 50 -- volts 380
used
Blowing moulding machine SIPA 4 cavities • Year: 1998. • Speed: 4.000 bph. • Model: SF 8/4. • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections.
used
Injection unit Screw diameter: 35 mm Calculated injection volume: 168 cm3 Material pressure: 2000 bar Closing unit Closing force : 1000 kN Min. mold thickness: 320 mm Other Commissioning: 2006 Tonnage: 100
used
Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1600x1530 Clearance between columns (hxv) [mm] 1120x1100 Min./max. mold height [mm] min 1100 Injection unit Screw diameter [mm] 135 Injection volume [cm3] 8588 Injection weight [g] 7807
used
Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).
used
Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).
used
This injection moulding machines was manufactured in 2001. The Ferromatic K-Tec 350 S/2F is known for its robust performance and reliability, suited ideally for a variety of injection moulding applications. If youâre considering enhancing your production capabilities, the Ferromatic K-Tec 350 S/2F machine we have for sale could be an excellent fit. Contact us for more information.
used
SIDEL SBO 14 Universal PET blow-moulding machine for 14 moulds. The manufacturing year is 2006 and the capacity is of 28.000 BPH. The machine is equipped with a quick change or shell moulds. Personalization for preform neck PCO28 1810. Machine equipped with: - Preforms tipper - Preforms hopper - Electrical cabinet - Sidel control panel & PCC - Air conveying system in option The machine is in very good condition which makes it a good opportunity. If you are interested by this machine, contact us for further information and to discuss the availability.
used
This HYUNDAI 450 injection moulding machine was manufactured in 2001. It features a screw diameter of 76 mm, an injection pressure of 1840 ã/ã , and a mould clamping force of 450 tons. The machine has a total power capacity of 88.18 kW and a hydraulic oil reservoir with a capacity of 900 liters. This is an excellent opportunity to acquire the HYUNDAI 450 machine we have for sale. Reach out for more information.
used
Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes
used
Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] thirty Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20
used
Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 230 Injection pressure [bar] 2022 Dimensions and weight Net weight with control cabinet [t] 6.8 Dimensions (length x width x height) [m] 4.82 x 1.48 x 2.01 Closing unit Clamping force [kN] 1200 Dimensions of mounting plates (hxv) [mm] 740x680
used
Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 750x750 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 412 Injection weight [g] 392 Injection pressure [bar] 1909 Dimensions and weight Net weight with control cabinet [t] 8.8 Dimensions (length x width x height) [m] 5,800 x 1,700 x 2,400
used
We have an injection molding system for sale • Netstal Synergy 3500-2700Ε year 2007 machine • incl. Closing Mold 72Cavity 29/25 cap 1.32gr.with /3,5sec. cycle /year 2016 Plastisud • Hot runner year 2016 Plastisud • Controller Custom made • Belts • Packaging unit 5-1-5 The machine is in production in Greece until the end of March 2024 and will be available for sale in May 2024.
used
2-sided planing machine with slot bed: Year of construction 1993 Working width 170 mm Working height 120 mm Working height 4-sided 120 mm Number of spindles 4 Spindle arrangement u-o-u-o Diameter of the spindles 50 mm Spindle speed 6000 rpm Engine power 30-22-11-11 kW Feed speed 12-120 m/min Driven rollers in table 6 Automatic table lubrication Table height constant 840 Diameter of the suction nozzles 4x160 mm Weight 4500 kg Space requirement 4000x1700x1400 mm Voltage / Frequency 400V 50Hz 3Ph.
used
Closing unit Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 X 1530 Clearance between columns (hxv) [mm] 1120 X 1000 Min./max. mold height [mm] min 600 Maximum opening width [mm] 2000 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2863 Injection weight [g] 2605 Injection pressure [bar] 1742
used
Closing unit Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1000x950 Clearance between columns (hxv) [mm] 735x685 Min./max. mold height [mm] 250 - 600 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 383 Injection pressure [bar] 2304 Electrical and hydraulic equipment Rated power of the pump motor [kW] 36.1 Heater power [kW] 29.2
used
Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907x910 Clearance between columns (hxv) [mm] 630x630 Min./max. mold height [mm] 460-800 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 424 Injection pressure [bar] 1890 Electrical and hydraulic equipment Heater power [kW] 30.3 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (length x width x height) [m] 6.95 x 2.08 x 2.48
used
Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021
used
Closing force: 40,000kp, connected load: 7.5kW.
used
Tub dimensions: 825x800x875mmm, max. load: 500kg/tub, connected load: 21.6kW, length: 3765mm, width: 1235mm, height: 1290mm, weight: 950kg, with documentation.
used
Connected load 5 / 5.5hp.
used
Spindle length: 130mm, spindle movement: 125mm, spindle diameter: 30mm. Max. Tool diameter: 260mm, max. speed: 10000rpm, speed levels: 9, controlled axes: 3, table length: 2700mm. Operating hours: 721h, setting hours 665h, total hours: 1388h. Including accessories on the picture.
used
I sell a router for Koperfräsen Sicar, built in 1998. Milling head with motor Swivel + - 45° Spindle holder fi.10mm Electric motor: 1.9kW / 2800 rpm -> 18,000 rpm at the spindle 1.5 KW / 1400 rpm -> 9,000 rpm on the spindle Pneumatic connection the milling cycle, pedal operated. Made in Italy.
used
Suitable for processing door seals, control: SIEMENS SIMATIC, with documentation, an on-site inspection is possible.
used
Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.
used
There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible.
used
Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm.
used
Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.
used
Mould thickness: 100-440mm.
used
Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.
used
Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
used
Connected load: 17.71kW.
used
Connected load: 37kW.
used
Clamp force: 350kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
used
Clamp force: 350kN, heating output: 4kW, connected load: 15kW, weight: 1.7t.
used
There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible.
used
Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.
used
Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.
used
Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
used
Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
used
Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)
used
Clamping force: 1600kN, stroke volume: 215cm³, injection pressure: 2020bar, power: 15kW, weight: 5.7t, including six Temperature Control Devices SINGLE and Dry Air Dryer PIOVAN.
used
Screw diameter: 50 mm Displacement volume: 471 cm³ Spray weight in polysterol: 405 g/hp Injection pressure: 2,058 bar Clamping force: 200 t Lights Spar spacing H x V: 560 x 560 mm Tool installation height min.: 300 mm Opening distance: 750 mm CONTROL: IQT Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 37 kW Total connection value: 58.8 kW Total weight: 9,000 kg Dimensions L x W x H: 5.5 x 1.9 x 2.4 m Terms of payment: 100 % before taking over the machine, purely net
used
Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition
used
Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition
used
Ejection stroke: 35mm, weight: 700kg.
used
Clamp force: 750kN, heating output: 11kW, weight: 3t.