We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,273 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description increased floor
used
Description Rubber molding machine Working hours: 18.000
used
Description Rubber molding machine Working hours: 27.000
used
Description Rubber molding machine Working hours: 27.000
used
used
used
used
used
This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm
used
Arburg 420C-1000-250 (176) with challenge tape Item number: 176 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 89 g Clamping force: 1,000 kN Screw diameter: 30 mm Spray pressure: 2470 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 25 kW Operating hours: 70,643 h Weight: 3180 kg Dimensions: 4.5x1.7 m Funnel: No Core train: Yes
used
Description Warm chambers 8 zones Magnetic planes
used
used
used
Description EUROMAP 12 INTERFACE
used
Description 4 HOT ROOM ZONES AVAILABLE LANGUAGES: ITALIAN ENGLISH GERMAN FRENCH SPANISH ARABIC
used
Description with hoist it changes molds
used
used
Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm
used
Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm
used
Description Euromap 67 robot interface plus adapter to euromap 12 hot chambers 4 zones
used
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
used
Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm
used
used
Inv. Num. : 6167 Type: GUIDANCE LWF 1300 -SV Producer: Leadway Created: 2016 Parameters: Clamping force: 130 t Screw diameter: 35 mm Distance between stands: 470x420 mm Ejector force: 45 kN Screw stroke length: 120 mm Mould height: 450 mm speed: 320 1/min Machine length: 4900 mm Machine width: 1400 mm Machine height: 1850 mm Spray weight: 5300 kg
used
used
Description E 67 robot interface external control unit for hydraulic radials (2 radials)
used
used
used
Description mold holder planes 740 X 680 New screw and barrell Sprue removal robot ENGEL mod. ER-USP 5 year:2006 pieces falling chute with waste selector
new
Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed
used
Description working hours: 23.000h
used
used
screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)
used
used
Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours
used
HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
used
used
Description SILICONE PRESS 12 zone mold heating water channels 2 zones 6-zone thermoregulator control WAGNER Reinhardt-Technik pumping unit mod. LSR 200l and Twin year 2017
used
Description Working hours: 73.000h New pump.
used
used
Description Electrical charge
used
Description Working hours: 71.800 Electrical charge
used
Description Working hours: 74.000 Electrical charge
used
Description Working hours: 75.000 Electrical charge
used
Description Electrical charge
used
Description Working hour: 72.000 Electric charge
used
used
Description Working hours: 47.000
used