We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,301 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Injection mould for round plastic bucket 5.5 litres Mould information: Weight: 449kg Dimensions of the mould (mm): Φ=420, Φ1=500, H1=415 Number of cavities: 1 Centering ring (mm): Φ 160 Availability: Immediate Current condition: out of production, can not be seen while working Bucket information: Volume: 5.5 L Brimfull Volume: 5.9 L Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 231 / Ø 235 / Ø 195 Height (mm): 190 Weight bucket (g): 220 ±5 Delivery time: To be agreed Guarantee: Without guarantee Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number to the lid of bucket (161549342) Number of the handle of bucket (161595367) Contact number: 0038651213228
used
Hydraulic pressure: 210bar, weight: 3.1t.
used
Hydraulic pressure: 210bar, weight: 3.7t.
used
Closing force: 110t, max. shot weight: 280g, opening stroke: 850mm, installation height: 250-695mm, distance between the bars: 450x450mm, weight: 6.1t, with Handling Wittmann W621-480-NC4.
used
There are three identical machines available, screw diameter: 70mm, operational hours counter machine 1/ 2/ 3: 65,000/ 60,000/ 46,345h, year of construction machine 1/ 2/ 3: 2007/ 2008/ 2012, for each machine there is one Handling Robot Wittmann W731 available.
used
Including spare parts, without accessories, was maintained regularly.
used
Including spare parts, without accessories, was maintained regularly.
used
including spare parts, without accessories, was maintained regularly.
used
Injection mould for lid of 5,5 L and 6,5 L plastic round bucket: Weight of the mould: 191 kg Dimensions of the mould (mm): Φ=400, H=270 Number of cavities: 1 Centering ring (mm) (Φ): 125 Lid weight (g): 85 ±2 Current condition: ready to work Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Lid inserts: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the bucket 5,5 L (search: 161523670) Number to the bucket 6,5 L (search: 161530621) Number of the handle of buckets (search: 161595367) Contact number: 0038651213228
used
Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling.
used
There are eight ARBURG Allrounder 220M available.
used
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.
used
Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.
used
Clamping force: 420t, screw diameter: 70/ 15mm, injection volume: 1212/ 292cm³, length: 7900mm, width: 2200mm, height: 5000mm, weight: 25t, with robot.
used
Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.
used
Clamping plate dimensions: 830x770mm, distance between tie-bars: 560x500mm, ejector stroke: 200mm, screw diameter: 60mm, injection pressure: 1778bar, weight: 11.1t, with handling.
used
Injection pressure: 2057bar, clamping force: 3500kN, heating output: 30.7kW, weight: 16.4t, operational hours counter: 62,600h.
used
Clamping force: 750kN, opening stroke: 40kN, connected load: 18.5kW, weight: 7.5t.
new
Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left
used
Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.
used
Information about mould: Weight of the mould: 280kg Dimensions of the mould (mm): A = 445, B = 295, C = 225 Centering ring (mm) (Φ): 99 Number of cavities: 2 Current condition: operational, can be seen while working Availability: immediate Delivery time: to be agreed Guarantee: without guarantee Information about product: Dimensions (A, B, s) (mm): 254, 145, 9 Weight (g): 20g ± 1 g Contact number: 0038651213228
used
Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.
used
Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools.
used
With documentation, the machine should be tested.
used
Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation.
used
Paoloni TX 145L Table milling machine Table milling machine 45° swivel Digital Height adjustment digital Motor 5.5 KW 50 HZ 400V Table length 1.5m with roller B=1.2m Spindle 30mm Table opening 300mm Excerpt Built in 1995 Weight 560 kg G&-5039-M3W1R VAT not deductible!
used
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
used
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
used
Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, controls: Procan MD, length: 3250mm, width: 1140mm, height: 2040mm, weight: 2.25t, operational hours counter: 29,664h, with robot interface.
used
Hydraulic operating pressure: 275bar, weight: 4.1t.
used
SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools
used
Connected load: 42kW.
used
Connected load: 40kVA.
used
SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools
used
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.
used
Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.
used
Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power.
used
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.
used
Weight: 9.1t, the machine is leaking and the control card is missing.
used
Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations
used
SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools
used
Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.
used
SPECIFICATIONS: Workbench: 1100 x 900 mm Manual adjustment Installed power: 9 kW Engine brake Equipment: 01 Drive (0.37 kW)
used
- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder
used
SPECIFICATIONS: Spindle diameter mm: 35 Installed power HP: 7.5 Spindle brake Sliding transport trolley at the front
used
Operational hours counter: 59,129h, with Handling PSA 2080.
used
Operational pressure: 210bar, weight: 4t, with documentation, without accessories.
used
Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.
used
Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h.
used
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.