mill used for sale

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 28/40. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee ...

Qty. 1 Second-hand 4-Hi reversing rolling mill – Electrical equipment and cooling unit are not included! Mfc.: MINO Type: 4-Hi Reversing Mill LLQ500 Built: 1970 Revamped: 2011 by MINO Strip width: 420 mm Thickness: 0.2 – 4.0 mm Speed: 20 – 400 m/min. Coil weight: 8.0 T Coil: ID 500 mm Coil OD: 1800 mm Rolled material: Carbon steel (can be used for other applications too)

219mm x 15mm Nanjing API Pipe Plant Year: 2021, Pipe Diameter: 101mm – 219mm, Wall Thickness: 2.75mm – 15mm, Pipe Length :4.2m – 16m, Yield Strength: 63.4Kg/cm2 (max), Line Speed: 10 – 30 meters per minute, Direction: Right to Left, Continuous Operation with Accumulator, Approximate Annual Production: 127,000 ton / year. Coil Car, Uncoiler, Straightener, Shear & Welder, Horizontal Accumulator, Forming Mill with Universal Drives, Individual Gear Boxes, 1,000Kw High Frequency Welder, Outside and Inside Bead Removal with Scrap Winder, Ultrasonic Tester, Cooling Section (Air and Water), Sizing Mill with Universal Drives, Individual Gear Boxes, Turk Heads, Flying Rotary Cut Off Saw, Run Out Conveyor, Straightening Machine, End Facing Machine, Automatic Packaging Line, Tooling, Spare Parts

Sugar mill BAUERMEISTER UT 12 Turbo / BE 1500 2 pieces sugar mills each mounted on a sugar silo turbo rotors and mill in good condition Capacity 1000 kg / h

Grain mill grinding turbine Stone mill for cereals, legumes and spices Table machine wood Grinding stone made of corundum ceramic Power: about 200g /minute Grinding degree: Infinitely adjustable from very fine to coarse Funnel frame approx. 1.3 kg cereal Connection 220V, 600 watts Dimensions: 208 x 242 x 380 mm, WxDxH Visit our Milbrandt Outlet with show bakery!

Grain mill grinding turbine Stone mill for cereals, legumes and spices Table machine Grinding stone made of corundum ceramic Power: about 200g /minute Grinding degree: Infinitely adjustable from very fine to coarse with built-in cooling fan Funnel frame approx. 1.1 kg cereal Connection 220V, 600 watts Dimensions: 190 x 220 x 380 mm, WxDxH NEW Machine Visit our Milbrandt Outlet with show bakery!

Grain mill grinding turbine Stone mill for cereals, legumes and spices Table machine Grinding stone made of corundum ceramic Power: about 100g/minute Grinding degree: Infinitely adjustable from very fine to coarse with built-in cooling fan Funnel frame approx. 1.1 kg cereal Connection 220V, 360 watts Dimensions: 190 x 220 x 380 mm, WxDxH Visit our Milbrandt Outlet with many bakery machines and appliances!

Grain mill grinding turbine Stone mill for cereals, legumes and spices Table machine wood Grinding stone made of corundum ceramic Power: about 100g/minute Grinding degree: Infinitely adjustable from very fine to coarse Funnel frame approx. 1.3 kg cereal Connection 220V, 360 watts Dimensions: 208 x 242 x 380 mm, WxDxH Visit our Milbrandt Outlet with many bakery machines and appliances!

Make: Fryma Line ML 250 / MZ 250 for soy milling, production of soy milk Perforated disc mill: 45 kW Colloid mill: 60 kW Capacity: approx. 7000 l/h (soy milk) Dimensions LWH: 1700 x 1500 x 1550 mm Weight: approx. 1100 kg

Colloid mill (vibration colloid mill) Manufacturer: Probst & Class (PUC) Type: JV14 N°: 67017 with hopper Engine: Loher & Sons Power: 1.5 kW 2880 rpm normal-toothed grinding set very good condition On-off button Product outlet milk pipe union mobile on lockable wheels LWH: 840 x 350 x 350 mm

Stawert Mill Model G12F1. The grain mill is without attachment/funnel. - Ser. N°: 288975 - elek. Voltage: 220V - elek. Power: 550W

PONAR ŻYWIEC SG-180FE-2B plastic mill built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main advantages of the device are its comfortable operation and low noise level during machine’s work. SG 180FE 2B granulator is equipped with 9 rotary knives and 2 fixed knives with a length of 180 mm, capable of milling up to 30 kg of plastic elements per hour. The machine is offered with dust extraction. Total weight of the machine is 120 kg. Technical data of granulator PONAR ŻYWIEC SG-180FE-2B - length of blades: 180 mm - number of rotary blades: 9 - number of fixed blades: 2 - capacity: 30 kg/h - maximum rotation speed: 940 rpm - throat depth: 200 x 220 mm - dust extraction - motor power: 1,5 kW - power supply: 380 V; 50 Hz - ...

Used cryogenic mill model PCJ-500. Machine for grinding the product cooled with liquid nitrogen, made of 304 stainless steel, 16 mm thick, externally dimensioned: - length: 6844 mm - width: 2132 mm - height: 3588 mm. Focused on grinding the product based on liquid nitrogen, which allows achieving a temperature of -196 ° C. Liquid nitrogen does not come into contact with the product, it is the source of this low temperature. The cryogenic mill requires a nominal power consumption of 40.45 kW, at 380V, 50Hz.

White M95 Poppy Mill used poppy mill from Weisse Bäckereitechnik Maschinenbau for sale from stock Bielefeld. Built in 2005 If necessary, always freshly squeezed poppy Maximum yield and very good quality of the grinding material With the adjustable pressure roller, the grinding quality can be individually adjusted High working speed Easy to use and clean Clean working by spring-energising scrapers

old, but very good Alpine A 250 B mill, drive: 5.5 Kw., mounted on frame, with motor circuit breaker, ready for use. old, but very nice Alpine A 250 B Mill, motor 5.5 Kw., frame mounted, ready for use

Mixer, hammer mill, crusher, glass crusher, used Manufacturer: EHINGER IMPIANTI Type: MUD 89 Year of construction: 2003 Engine SIEMENS 45 kW 1475 rpm 400/690 V Reduction with V-belt approx. 4,3:1 Total dimensions: approx. 2800 x 1700 x 2000 mm The mill was planned for the simultaneous grinding and separation of materials with different grinders e.B fragile and tough fractions. It was part of a glass recycling plant in which foam glass gravel was produced. We sell the complete plant with belt ovens, cup plants, silos, crushers and mills.

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Shredder | Cutting mill 18/45/ 7.5 kWt VGA for plastic 18/45 VGA Cutting mill for plastics, cable 7.5 KW, 80-140 kg/h. Model: VESPA 18/45 / 7.5 kWt VGA Throughput Kg/h: 80-140 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×225 Stator Knife Quantity/Dimensions Piece x mm: 4×225 Motor kW: 7.5 Weight Kg: 320 Capacity (cable) kg/h: up to 140 Capacity (plastic) kg/h: 80-120 Dimensions (mm) A 860 B-670 C-1480 D 1250 E 460 F 220

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Model: VESPA 25/40/7.5 VGA Throughput Kg/h: 100-140 Rotor diameter мм: 250 Rotor knife quantity/dimensions piece x mm: 6×200 Stator Knife Quantity/Dimensions Piece x mm: 4×200 Engine kW: 7.5 Weight Kg: 560 Dimensions (mm) A 1115 B 770 C 1800 D 1490 E 410 F 310

Rental unit, not for sale. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in Pharma design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for R&D and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and ...

Hammer mill,stainless steel,Fitz-Mill model D6,7,5 HP.

Pin mill,stainless steel,mill house,Ø 180 x L 280 mm.,1,5 kW.

Impact forming mill is used for dry and fine grinding of brittle materials with a hardness of up to 3 Mohs. the impact fine grading mill combines efficient impact grinding with efficient classification in one unit. The supplied materials are thrown into the liner by the milling tools at a speed of 60-130m/s and then shredded. the ground material is transported to the integrated cashier for processing by means of air and rotation of the grinding tool. the fineness can then be infinitely adjusted via the speed of the classifier. Particles that are too large are sorted out by classifiers and end up in the grinding zone for continuous comminution.

Features and advantages of the classifier mill ACM: • Grinding and classifying in one machine. • Excellent selectivity, steep particle size distribution. • Infinitely adjustable fineness. • Flow-optimized, conical classifier wheel guarantees product without oversize grain and low wear compared to cylindrical classifier wheels. • Cool and gentle grinding due to high air flow. This makes the ACM ideal for processing temperature-sensitive products. • Deflection area in the grinding chamber lid: classifier gap flushing not required. • Low noise emission. • Very good running characteristics due to the belt-driven grinding disc. Bzc3pyxj32 • Easy to maintain: motors and bearings easily accessible. • The lid lifting device allows quick access to the grinding and viewing zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Option ...

Tool holder, milling holder, milling tool -Adjustment: SK50 -Shell end mill: MK5 -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Weight: 6 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Shell end mill: MK5 -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Weight: 6 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Shell end mill: MK3 -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Weight: 3 kg

Corundum disc mill Manufacturer: FrymaKoruma Type: MK-360/B Item #: 101031 Year of construction: 2007 Power: 45 kW Pressure product space: 4/3 bar Pressure double jacket: 6 bar Weight: 670 kg new grinding discs installed with control cabinet with double-acting mechanical seal various spare parts LBH: Mill: 1150 x 650 x 600 mm Control cabinet (large): 1000 x 290 x 1220 mm Control cabinet (small): 400 x 300 x 200 mm

Robinson 60” (1500mm) x 22” (550mm) Two Roll Mill Hand operated nips Water cooled rolls Rotary joints for steam heating / water cooling Electric Autostop (kicked reverse stop) Lunn Safety Bar Bull wheel drive The Mill sits on a fabricated bedplate With Gearbox, Motor and Control Panel

Powder Mill powder mill Manufacturer: Glatt Model: TR 160

Composed of: - Pin mill, manufacturer : Condux, type CST 150 / F, pin disc diameter : 165 mm; - Dosage - Filters - Container approach --> mill housing in stainless steel;

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

Grinder mill with open rotor blades, cutting chamber: 430x200 mm, motor: 5.5 kw. With electrical panel. We offer a highly efficient shredder mill with blades and open rotor, designed to optimize the reduction of plastic materials. Our machine features a 430x200mm cutting chamber and a 5.5 kW motor that ensures solid performance in plastics processing. In addition, we include an electrical panel that facilitates the control and safe operation of the machinery. At [Your Company], we are committed to providing state-of-the-art solutions for the thermoplastics management and recycling industry. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Item condition: good Availability: immediately technical documentation: available Filling: Big Bag Mill footprint: 1800 x 1200 mm Total height of the mill: approx. 4200 mm Disassembly: included Machine is sold without screens. Application: - for grain grit (very fine) - for grain grit (fine) - for grain grit (medium fine) - for grain grit medium, breadcrumbs (fine), white bread - for grain grit coarse, breadcrumbs (medium), mixed bread - Breadcrumbs coarse, mixed bread, white bread - Wholemeal bread - Pumpernickel

Quadro Comil model 197S conical mill 197S conical mill This machine is as new EX / ATEX 316 ss with RPM display suitable for screening wet or dry powders. The machine has a capacity of 45 - 450 kg/hour depending on the product characteristics and the screen being used. It is driven

Machine : Tools for boring mill / radial drilling machine Type: MK5 5 drill rods φ 40 , 30, .. L- 280 – 400mm 3 extensions MK5 – MK4 , L-400-520mm 1 boring tool Oerlikon MK5, φ 70, 6-260 5 Mandrels MK5 - φ 16, 22, 27,32,40mm 2 Pliers chuck Clarkson 1 MK5 boring tool, adjustable, φ 60mm 2 Shots 2 milling cutters: end mill rough/plain φ 56x100mm, / groove milling cutter 4 milling cutters: 2 rough/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 700,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 threaded rods M20, L-120 – 400mm 3 x 2 pcs. clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( backing )

Buhler Pellet Mill Pelleting Machines 420 pellet mill feeding and conditioning 110 kw

Granulator - Rapid G-100-34 Year of construction: 2009 Description: Slow-raining granulator with gearbox Power: 1.5 kW 6 stator knives, 2 x joints, rotor with the milling cutters Hopper inlet: 360x520 mm Grinding chamber opening: 240x350 mm Cutting mill without sieve, regulation of the grinding thickness by means of the hole adjustment between milling machine and stator knife Granulate mill is used to grind the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor Price: On request

Corundum disc mill & excenter screw pump Manufacturer: Fryma Type: MK-200 Power: 15 kW with double jacket (heating & cooling) new grinding discs, with new spare grinding disc pair with pressure gauge with vessel (LBH: 730 x 730 x 900 mm) with excenter screw pump: speed-controlled, with sight glass Power: 0.55 kW LBH: 1100 x 230 x 270 mm LBH corundum disc mill: 650 x 450 x 950 mm

Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm

DECKEL MAHO DMU 60 T CNC vertical machining centre was built in Germany in 1999. The machine performs precision machining of workpieces weighing up to 350 kg, in three axes with feeds of 600 mm (X axis), 525 mm (Y axis) and 500 mm (Z axis). Workpieces are placed on a tilting rotary table with the dimensions (L x W): 900 x 500 mm and they may also be machined horizontally, thanks to the mounted detachable milling head The high-performance spindle of the milling centre rotating at a speed of 12000 rpm, together with the advanced HEIDENHAIN Mill+ numerical control, guarantee excellent precision, quality and a significant reduction in machining time. The milling centre’s tool magazine has a capacity of 25 tools and provides tool changes in a very short time. The CNC milling machine is also equipped with a post-processor with CAD/CAM software and a desktop computer. The total weight of t ...

Laboratory mill: Coarse grist mill MIAG from HINZ, Braunschweig Adjustable conical grinder ø 60 mm Drive 0,22kW - 1300 1/min, hinged for quick cleaning, with outlet tank Very solid, older model, can be used immediately

Cutting Mill - Rapid 2048-KUP Year of construction: 2000 Slow-rotating granulator with gearbox with cyclones and dust collector Power: 11 kW 2 stator knives, 12 rotor knives, the sieve - interchangeable Hopper inlet: 490x160 mm Grinding chamber opening: 480x210 mm Automatic feeding of the regrind material to big-bag with dedusting Soundproof mill Price: On request

Cutting Mill - Rapid 2048-KURF Year of construction: 2005 Slow-rotating granulator with gearbox with cyclones and dust collector Power: 11 kW 2 stator knives, 12 rotor knives, the sieve - interchangeable Hopper inlet: 490x160 mm Grinding chamber opening: 480x210 mm Automatic feeding of the regrind material to big-bag with dedusting Soundproof mill Price: On request

Cutting Mill - Rapid 2048-KUP Year of construction: 2001 Slow-rotating granulator with gearbox with cyclones and dust collector Power: 5.5 kW 2 stator blades, 6 rotor knives, the sieve - interchangeable Hopper inlet: 490x160 mm Grinding chamber opening: 240x210 mm Automatic feeding of the regrind material to big-bag with dedusting Soundproof mill Price: On request

Cutting Mill - Wanner C17.26 Year of construction: 1999 Slow-rotating granulator with gearbox Power: 3 kW 2 stator knives, 12 rotor knives, the sieve - interchangeable Funnel inlet: 240x300 mm Grinding chamber opening: 240x170 mm It is very easy to clean the mill, which is especially recommended if the color of the ground fabric is changed often Price: On request

Cutting Mill - Wanner 13.20 Year of construction: 2000-2002 Slow-rotating granulator with gearbox Power: 2.2 kW 2 stator knives, 9 rotor knives, the sieve - interchangeable Hopper inlet: 220x220 mm Grinding chamber opening: 200x140 mm It is very easy to clean the mill, which is especially recommended if the color of the ground fabric is changed often Price: On request

For sale: San Rocco CNC boring mill type MEC 100 with Siemens 810 control. Longitudinal and transverse movement is 1,200 x 2,000 mm, table size is 1,100 x 1,300 mm and is equipped with a full-fledged C-axis / spindle diameter is 100 mm with ISO-50 holder. The drilling spindle movement is 700 mm, the maximum spindle speed is from 2 to 1,000 rpm in 4 stages. The machine is in good condition and has an X, Y and Z axis and a full-fledged C axis and a W axis (drilling spindle 700 mm) You can move 2 axes simultaneously. You can mill around on the machine. Can still be visited under electricity, subject to prior sale.

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Used Herbold Mill Model PU 300 Refurbished - rotor new, with sieve basket, newly mounted, converted dosing chute Mill made of INOX Ex-proof