meat and fish processing machines used for sale (1,855)

Type: TSO 600/96/4 EL Serial number: 1044642 Year of construction: 2015 Model: counter-clock-rotated, left hand execution Belt width: 600 mm Tiers: 2 x 4 pc. Poruct gap: 135 mm Heating: electric, 4 x 100 kW Steam: 7.5 - 8 Bar, max 1500 kg/h Power: 3 x 400V, 50Hz, 440kW Dimensions: 11040 x 3994 x 3287 mm Weight: 20000 kg With Novatech hygrophil, CIP

We are selling here a frozen meat slicer from the manufacturer FMS GmbH in a very good used and functional condition. The machine runs on 400 volts, completely stainless steel, rollable, passage 38 cm wide, for chopping frozen meat, workshop tested, dimensions W/D/H 70/95/90 cm, others on request.

We are selling here a vacuum sealer from the manufacturer Vama, type VP 900 in a very good used and functional condition. The device was built in 2012, runs on 400 volts, 5 kW, 160 pump, with gassing, welding bar right/left, chamber size 53/53/17 cm, rollable, workshop tested, immediately ready for use, dimensions W/D/H 85/75/95 cm, others on request.

We are selling here a belt descaler from the manufacturer Maja, type ESB 441 in a good used and functional condition. Runs on 400 volts, bandwidth 37 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 65/90/115 cm, others on request.

Manufacturer: Handtmann Intestinal Holding Device Type 60-6 ( for long filling tube ) for filling machine HANDTMANN VF 50, 80, 100, 200, 300 i all VF 600 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

REF-2049 BIZERBA A 404 FB AUTOMATIC SLICER Automatic slicer manufactured by Bizerba Machine number: 10597824 Model: A 404 FB Year: 2009 30-55 strokes/min Slice thickness: 0.5-12 mm Cutting carriage: 400 mm Overall dimensions: 1,560 mm length, 1,000 mm width, 1,540 mm height

REF-2368 HOBART CNA-L CONVEYOR RACK-TYPE DISHWASHER Conveyorized rack-type dishwasher. Manufacturer: HOBART. Model: CNA-L. Serial no.: 86463655. Year: 2007. 26.30 kW/50.30 A. 380-415 V/50 Hz/3-phase. Throughput: 180 racks/3,240 plates per hour (120 racks according to DIN 10510). Complete with HOBART heat pump. Pump model: CHP 18. Serial no.: 692. Year: 2007. Refrigerant type: R134a (capacity 3.2 kg). Maximum pressure: high side 28 bar; low side 8 bar. Compressor: maximum flow rate 17 m3/h; 2,900 rpm. Inside dimensions: width 510 mm, height 460 mm. Overall dimensions: length 3,200 mm, width 800 mm, height 2,150 mm. With large” high-performance pre-wash zone, as well as washing, rinsing and drying zones. Made of high-grade stainless steel. SMARTRONIC electronic control. Including 2 speeds, emergency stop and main switch. Efficient dual-rinse system. In-buil ...

Used Alpina clipping machine type DKF 18.15. Technical data: Voltage 380 V Number of phases 3 Frequency 50 Hz Pressure 8 bar

Risco RS1040 MAS Vacuum stuffer Serial: A003004 Stainless, 50L agitated hopper, variable speed, portions from 5 to 10000g, 2.3KW, with manual, 3Ph

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

Bacon Cutter Treif Felix 100 CE Stainless Steel, 400 V, 3 A, 1.0 kW, 173.5 kg, shelf PE, feed chute 30x10x10 cm, phase turner, rotating field detection, 1 gate set, 1 spare knife, total dimensions 95x75x105 cm, bacon, ham, sausage and other types of meat can be cut just as easily as cheese, fish, fruit and vegetables, capacity approx. 800 kg / h, year of construction 2009

Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph

Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph

Kaj Olesen TWP54 Pin Bone remover Serial: 10810 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph

Type: TGR103 Serial number: 700292 Year of construction: 2020, never used! Hole plate diameter: Unger, H82 3-piece Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 500 x 500 x 500 mm Weight: 61 kg With built-in compressor to cool hopper Machine is never used, new out of the box

Type: TBS19KT Serial number: 700045 Year of construction: 2019, never used Cutting height: max 230 mm Cutting width: max 190 mm Saw blade: 1750 x 16 x 0.45 mm Saw speed: 17 m/sec Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 490 x 620 x 1000 mm Weight: 87 kg Machine never used, new out of the box

Type: TG105 Serial number: 603429 Year of construction: 2018, never used Hole plate diameter: Enterprise E32 Hopper: 42 litres Power: 3 x 220V, 50Hz, 2.2kW Dimensions: 700 x 580 x 490 mm Weight: 62 kg Never used, new out of the box

Type: TG101 Serial number: 700261 Year of construction: 2020, never used! Hole plate diameter: Enterprise E22 Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 370 x 350 x 430 mm Weight: 39 kg Machine never used, new out of the box

Type: EFR2000/450 Serial number: 1713 Year of construction: 2008 Belt width: 450 mm Frying length: 2000 mm Frying time: 25 - 250 sec Heating: electric, 95 kW Power: 3 x 400V, 50Hz, 102kW Dimensions: 4950 x 2100 x 3600 mm Weight: 1900 kg Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level control Prepared for CO² fire extinguisher Separate infeed conveyor

Laska mobile micro cutter -Model: FZ 225 -Power: 132 kW -Dimensions: 2220 x 1170 x 1280 mm -Set diameter: 225 mm -Hopper capacity: 200 L -Weight: 1500 kg -Power supply: 400 V 50 Hz 3N -Cutting set and additional parts included -Stock quantity: 1 -Condition: used

Karpowicz injector -Type: NK-27 -Power: 7.5 kW -Capacity: up to 1500 kg/h -Power supply: 400V 50Hz 3N -Belt width: 400 mm -Needle diameter: 2 mm -Number of needles: 27 -Dimensions: 1800 x 880 x 2100 mm -Weight: 300 kg -Made of acid-resistant steel -Quantity in stock: 1 -Condition: used/overhauled

Vacuum filler Vemag -Model: Robot DP10C -Power: 15 kW -Capacity: 6000 kg/h -Portion range: from 5 to 60,000 g -Hopper capacity: 250 L -Power supply: 380V, 50Hz -Vacuum pump: 20 m3/h -Made of stainless steel -Dimensions: 2450 x 1350 x 2200 -Weight: 1300 kg -Quantity in stock: 1 -Condition: used

120 liter K+G WETTER Cutter Mixer / Cutter Type: CUTMIX 120 STL / CM 120 Model: 420 Machine number: 420 / 1389 Year of Make: 2020 only 148 operating hours Infinitely programmable knife speeds Infinitely programmable mixing speeds (forward + backward) Infinitely programmable dish speeds electric knife lid lift Removable dam wall Intervention protection and flap Hydraulic loading for 200 litre cutter wagons hydraulic product ejector Touch control Preparation for K+G WETTER Cut-Control 6 mm cutter head Rated power: 43 kW Fuse: 100 amps used, very good condition - very little used

MADO Selekta 2 MKB651 Bone Band Saw completely made of stainless steel with motor brake Safety shutdown of the door without function a rubber foot is missing otherwise in good condition, must be cleaned thoroughly before use Video about test run available

High-performance double-sided contact cooking. The Formcook Contact Cooker is excellent for cooking boneless products such as chicken fillets, meat patties, steak, bacon, pancakes, fish fillets, shrimp and vegetables. This cooker has been used to fry vegan products like buns and steaks. The machine was last used in February 2025. Fat-free contact cooking with non-stick belts seals the natural juices and fats in the product for the highest eating quality and minimum cooking losses. The cooking time is adjustable. The Formcook Contact Cooker is manufactured by JBT Corporation in Sweden. More information is available at JBT’s homepage. A conveyor machine manufactured by Ilpra is included. The contact cooker and the conveyor are complete and ready for use.

Type: DCC2500/650 Serial number: 186 Year of construction: 2001 Belt width: 650 mm Infeed height: 2050 mm Outfeed height: 950 mm Pitch: 250 mm Belt speed: 1 - 10 m/min Power: 3 x 415V, 50Hz, 0.18kW Dimensions: 2850 x 1250 x 2150 mm Weight: 220 kg

Type: Qbo120-3-316-SGPV Serial number: 2304023123006 Year of construction: 2012 Bowl: 120 litres Speed: 0 - 2000 RPM Infeed height: 1450 mm Heating: steam, 160 kg/h Compressed air: 6-8 Bar, 20 l/min Power: 3 x 400V, 50Hz, 22kW Dimensions: 1800 x 1750 x 1800 mm Weight: 900 kg With automatic mixing, vacuum, double jacket and steam injection Automatic lid and tilting

Type: FGM 48 SW Serial number: 9518-2004 Year of construction: 2004 Belt width: 420 mm Needles: 2 x 48 needles of 4 mm Stroke height: 150 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 8.7kW Dimensions: 2250 x 800 x 2450 mm Weight: 700 kg With FM80 protein filter For bone-in and boneless meat Fomaco filter Type: PFS 5/225 CS Serial number: 9520-2004 Year of construction: 2004 Dimensions: 1750 x 650 x 1100 mm Weight: 100 kg

Type: FGM 64 SW Serial number: 9103-2003 Year of construction: 2003 Needles: 2 x 64 needles of 4 mm Belt width: 550 mm, walking beam Stroke height: 150 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 22A Dimensions: 2350 x 950 x 2450 mm Weight: 900 kg With FM80 protein filter For bone-in and boneless products Fomaco rotating filter Type: PFS 5/225 RCS Serial number: 8955-2002 Year of construction: 2002 Dimensions: 1900 x 700 x 1000 mm Weight: 100 kg

Type: FGM 48 SC Serial number: 8464-2001 Year of construction: 2001 Belt width: 400 mm Needles: 2 x 48 needles of 3 mm Speed: 20 - 70 strokes/min Stroke: 60 mm Stroke height: 150 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 8.6kW Dimensions: 2300 x 800 x 2300 mm Weight: 700 kg With FM80 protein filter Fomaco filter Type: PFS 5/225 CS Serial number: 8466 2001 Year of construction: 2001 Dimensions: 1850 x 700 x 800 mm Weight: 100 kg